smartcard_nss=""
libusb=""
usb_redir=""
-glx=""
+opengl=""
zlib="yes"
lzo=""
snappy=""
+bzip2=""
guest_agent=""
guest_agent_with_vss="no"
vss_win32_sdk=""
glusterfs_discard="no"
glusterfs_zerofill="no"
archipelago=""
-virtio_blk_data_plane=""
gtk=""
gtkabi=""
vte=""
objcopy="${OBJCOPY-${cross_prefix}objcopy}"
ld="${LD-${cross_prefix}ld}"
libtool="${LIBTOOL-${cross_prefix}libtool}"
+nm="${NM-${cross_prefix}nm}"
strip="${STRIP-${cross_prefix}strip}"
windres="${WINDRES-${cross_prefix}windres}"
pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}"
;;
--enable-vhost-scsi) vhost_scsi="yes"
;;
- --disable-glx) glx="no"
+ --disable-opengl) opengl="no"
;;
- --enable-glx) glx="yes"
+ --enable-opengl) opengl="yes"
;;
--disable-rbd) rbd="no"
;;
;;
--enable-snappy) snappy="yes"
;;
+ --disable-bzip2) bzip2="no"
+ ;;
+ --enable-bzip2) bzip2="yes"
+ ;;
--enable-guest-agent) guest_agent="yes"
;;
--disable-guest-agent) guest_agent="no"
;;
--enable-archipelago) archipelago="yes"
;;
- --disable-virtio-blk-data-plane) virtio_blk_data_plane="no"
- ;;
- --enable-virtio-blk-data-plane) virtio_blk_data_plane="yes"
+ --disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane)
+ echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2
;;
--disable-gtk) gtk="no"
;;
--enable-linux-aio enable Linux AIO support
--disable-cap-ng disable libcap-ng support
--enable-cap-ng enable libcap-ng support
- --disable-attr disables attr and xattr support
+ --disable-attr disable attr and xattr support
--enable-attr enable attr and xattr support
--disable-blobs disable installing provided firmware blobs
--enable-docs enable documentation build
--enable-usb-redir enable usb network redirection support
--enable-lzo enable the support of lzo compression library
--enable-snappy enable the support of snappy compression library
+ --enable-bzip2 enable the support of bzip2 compression library (for
+ reading bzip2-compressed dmg images)
--disable-guest-agent disable building of the QEMU Guest Agent
--enable-guest-agent enable building of the QEMU Guest Agent
--with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent
--with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)
--disable-seccomp disable seccomp support
- --enable-seccomp enables seccomp support
+ --enable-seccomp enable seccomp support
--with-coroutine=BACKEND coroutine backend. Supported options:
gthread, ucontext, sigaltstack, windows
--disable-coroutine-pool disable coroutine freelist (worse performance)
--enable-tpm enable TPM support
--disable-libssh2 disable ssh block device support
--enable-libssh2 enable ssh block device support
- --disable-vhdx disables support for the Microsoft VHDX image format
+ --disable-vhdx disable support for the Microsoft VHDX image format
--enable-vhdx enable support for the Microsoft VHDX image format
--disable-quorum disable quorum block filter support
--enable-quorum enable quorum block filter support
fi
fi
+##########################################
+# bzip2 check
+
+if test "$bzip2" != "no" ; then
+ cat > $TMPC << EOF
+#include <bzlib.h>
+int main(void) { BZ2_bzlibVersion(); return 0; }
+EOF
+ if compile_prog "" "-lbz2" ; then
+ bzip2="yes"
+ else
+ if test "$bzip2" = "yes"; then
+ feature_not_found "libbzip2" "Install libbzip2 devel"
+ fi
+ bzip2="no"
+ fi
+fi
+
##########################################
# libseccomp check
if test "$seccomp" != "no" ; then
- if $pkg_config --atleast-version=2.1.0 libseccomp; then
+ if test "$cpu" = "i386" || test "$cpu" = "x86_64" &&
+ $pkg_config --atleast-version=2.1.1 libseccomp; then
libs_softmmu="$libs_softmmu `$pkg_config --libs libseccomp`"
QEMU_CFLAGS="$QEMU_CFLAGS `$pkg_config --cflags libseccomp`"
seccomp="yes"
else
if test "$seccomp" = "yes"; then
- feature_not_found "libseccomp" "Install libseccomp devel >= 2.1.0"
+ feature_not_found "libseccomp" "Install libseccomp devel >= 2.1.1"
fi
seccomp="no"
fi
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
+int main(void) {
+ xc_interface *xc;
+ xs_daemon_open();
+ xc = xc_interface_open(0, 0, 0);
+ xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
+ xc_gnttab_open(NULL, 0);
+ xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
+ xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
+ xc_hvm_create_ioreq_server(xc, 0, 0, NULL);
+ return 0;
+}
+EOF
+ compile_prog "" "$xen_libs"
+ then
+ xen_ctrl_version=450
+ xen=yes
+
+ elif
+ cat > $TMPC <<EOF &&
+#include <xenctrl.h>
+#include <xenstore.h>
+#include <stdint.h>
+#include <xen/hvm/hvm_info_table.h>
+#if !defined(HVM_MAX_VCPUS)
+# error HVM_MAX_VCPUS not defined
+#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
fi
fi
+##########################################
+# X11 probe
+x11_cflags=
+x11_libs=-lX11
+if $pkg_config --exists "x11"; then
+ x11_cflags=`$pkg_config --cflags x11`
+ x11_libs=`$pkg_config --libs x11`
+fi
+
##########################################
# GTK probe
gtk_cflags=`$pkg_config --cflags $gtkpackage`
gtk_libs=`$pkg_config --libs $gtkpackage`
if $pkg_config --exists "$gtkx11package >= $gtkversion"; then
- gtk_libs="$gtk_libs -lX11"
+ gtk_cflags="$gtk_cflags $x11_cflags"
+ gtk_libs="$gtk_libs $x11_libs"
fi
libs_softmmu="$gtk_libs $libs_softmmu"
gtk="yes"
#endif
int main(void) { return 0; }
EOF
- if compile_prog "$sdl_cflags" "$sdl_libs" ; then
- sdl_libs="$sdl_libs -lX11"
+ if compile_prog "$sdl_cflags $x11_cflags" "$sdl_libs $x11_libs" ; then
+ sdl_cflags="$sdl_cflags $x11_cflags"
+ sdl_libs="$sdl_libs $x11_libs"
fi
libs_softmmu="$sdl_libs $libs_softmmu"
fi
fi
done
+# g_test_trap_subprocess added in 2.38. Used by some tests.
+glib_subprocess=yes
+if ! $pkg_config --atleast-version=2.38 glib-2.0; then
+ glib_subprocess=no
+fi
+
##########################################
# SHA command probe for modules
if test "$modules" = yes; then
shacmd_probe="sha1sum sha1 shasum"
for c in $shacmd_probe; do
- if which $c >/dev/null 2>&1; then
+ if has $c; then
shacmd="$c"
break
fi
if test "$pixman" = ""; then
if test "$want_tools" = "no" -a "$softmmu" = "no"; then
pixman="none"
- elif $pkg_config pixman-1 > /dev/null 2>&1; then
+ elif $pkg_config --atleast-version=0.21.8 pixman-1 > /dev/null 2>&1; then
pixman="system"
else
pixman="internal"
pixman_cflags=
pixman_libs=
elif test "$pixman" = "system"; then
+ # pixman version has been checked above
pixman_cflags=`$pkg_config --cflags pixman-1`
pixman_libs=`$pkg_config --libs pixman-1`
else
if test ! -d ${source_path}/pixman/pixman; then
- error_exit "pixman not present. Your options:" \
+ error_exit "pixman >= 0.21.8 not present. Your options:" \
" (1) Preferred: Install the pixman devel package (any recent" \
" distro should have packages as Xorg needs pixman too)." \
" (2) Fetch the pixman submodule, using:" \
tpm_passthrough=no
fi
-##########################################
-# adjust virtio-blk-data-plane based on linux-aio
-
-if test "$virtio_blk_data_plane" = "yes" -a \
- "$linux_aio" != "yes" ; then
- error_exit "virtio-blk-data-plane requires Linux AIO, please try --enable-linux-aio"
-elif test -z "$virtio_blk_data_plane" ; then
- virtio_blk_data_plane=$linux_aio
-fi
-
##########################################
# attr probe
libs_softmmu="$libs_softmmu $fdt_libs"
##########################################
+# opengl probe (for sdl2, milkymist-tmu2)
+
# GLX probe, used by milkymist-tmu2
-if test "$glx" != "no" ; then
- glx_libs="-lGL -lX11"
- cat > $TMPC << EOF
+# this is temporary, code will be switched to egl mid-term.
+cat > $TMPC << EOF
#include <X11/Xlib.h>
#include <GL/gl.h>
#include <GL/glx.h>
int main(void) { glBegin(0); glXQueryVersion(0,0,0); return 0; }
EOF
- if compile_prog "" "-lGL -lX11" ; then
- glx=yes
+if compile_prog "" "-lGL -lX11" ; then
+ have_glx=yes
+else
+ have_glx=no
+fi
+
+if test "$opengl" != "no" ; then
+ opengl_pkgs="gl"
+ if $pkg_config $opengl_pkgs x11 && test "$have_glx" = "yes"; then
+ opengl_cflags="$($pkg_config --cflags $opengl_pkgs) $x11_cflags"
+ opengl_libs="$($pkg_config --libs $opengl_pkgs) $x11_libs"
+ opengl=yes
else
- if test "$glx" = "yes" ; then
- feature_not_found "glx" "Install GL devel (e.g. MESA)"
+ if test "$opengl" = "yes" ; then
+ feature_not_found "opengl" "Install GL devel (e.g. MESA)"
fi
- glx_libs=
- glx=no
+ opengl_cflags=""
+ opengl_libs=""
+ opengl=no
fi
fi
fallocate_punch_hole=yes
fi
+# check that fallocate supports range zeroing inside the file
+fallocate_zero_range=no
+cat > $TMPC << EOF
+#include <fcntl.h>
+#include <linux/falloc.h>
+
+int main(void)
+{
+ fallocate(0, FALLOC_FL_ZERO_RANGE, 0, 0);
+ return 0;
+}
+EOF
+if compile_prog "" "" ; then
+ fallocate_zero_range=yes
+fi
+
+# check for posix_fallocate
+posix_fallocate=no
+cat > $TMPC << EOF
+#include <fcntl.h>
+
+int main(void)
+{
+ posix_fallocate(0, 0, 0);
+ return 0;
+}
+EOF
+if compile_prog "" "" ; then
+ posix_fallocate=yes
+fi
+
# check for sync_file_range
sync_file_range=no
cat > $TMPC << EOF
fi
########################################
-# check if we have valgrind/valgrind.h and valgrind/memcheck.h
+# check if we have valgrind/valgrind.h
valgrind_h=no
cat > $TMPC << EOF
#include <valgrind/valgrind.h>
-#include <valgrind/memcheck.h>
int main(void) {
return 0;
}
fi
fi
-# add pixman flags after all config tests are done
-QEMU_CFLAGS="$QEMU_CFLAGS $pixman_cflags $fdt_cflags"
-libs_softmmu="$libs_softmmu $pixman_libs"
+# prepend pixman and ftd flags after all config tests are done
+QEMU_CFLAGS="$pixman_cflags $fdt_cflags $QEMU_CFLAGS"
+libs_softmmu="$pixman_libs $libs_softmmu"
echo "Install prefix $prefix"
echo "BIOS directory `eval echo $qemu_datadir`"
echo "Target Sparc Arch $sparc_cpu"
fi
echo "xen support $xen"
+if test "$xen" = "yes" ; then
+ echo "xen ctrl version $xen_ctrl_version"
+fi
echo "brlapi support $brlapi"
echo "bluez support $bluez"
echo "Documentation $docs"
echo "nss used $smartcard_nss"
echo "libusb $libusb"
echo "usb net redir $usb_redir"
-echo "GLX support $glx"
+echo "OpenGL support $opengl"
echo "libiscsi support $libiscsi"
echo "libnfs support $libnfs"
echo "build guest agent $guest_agent"
echo "coroutine pool $coroutine_pool"
echo "GlusterFS support $glusterfs"
echo "Archipelago support $archipelago"
-echo "virtio-blk-data-plane $virtio_blk_data_plane"
echo "gcov $gcov_tool"
echo "gcov enabled $gcov"
echo "TPM support $tpm"
echo "Quorum $quorum"
echo "lzo support $lzo"
echo "snappy support $snappy"
+echo "bzip2 support $bzip2"
echo "NUMA host support $numa"
if test "$sdl_too_old" = "yes"; then
if test "$fallocate_punch_hole" = "yes" ; then
echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak
fi
+if test "$fallocate_zero_range" = "yes" ; then
+ echo "CONFIG_FALLOCATE_ZERO_RANGE=y" >> $config_host_mak
+fi
+if test "$posix_fallocate" = "yes" ; then
+ echo "CONFIG_POSIX_FALLOCATE=y" >> $config_host_mak
+fi
if test "$sync_file_range" = "yes" ; then
echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak
fi
echo "CONFIG_BLUEZ=y" >> $config_host_mak
echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak
fi
+if test "glib_subprocess" = "yes" ; then
+ echo "CONFIG_HAS_GLIB_SUBPROCESS_TESTS=y" >> $config_host_mak
+fi
echo "GLIB_CFLAGS=$glib_cflags" >> $config_host_mak
if test "$gtk" = "yes" ; then
echo "CONFIG_GTK=y" >> $config_host_mak
echo "CONFIG_USB_REDIR=y" >> $config_host_mak
fi
-if test "$glx" = "yes" ; then
- echo "CONFIG_GLX=y" >> $config_host_mak
- echo "GLX_LIBS=$glx_libs" >> $config_host_mak
+if test "$opengl" = "yes" ; then
+ echo "CONFIG_OPENGL=y" >> $config_host_mak
+ echo "OPENGL_CFLAGS=$opengl_cflags" >> $config_host_mak
+ echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
fi
if test "$lzo" = "yes" ; then
echo "CONFIG_SNAPPY=y" >> $config_host_mak
fi
+if test "$bzip2" = "yes" ; then
+ echo "CONFIG_BZIP2=y" >> $config_host_mak
+ echo "BZIP2_LIBS=-lbz2" >> $config_host_mak
+fi
+
if test "$libiscsi" = "yes" ; then
echo "CONFIG_LIBISCSI=m" >> $config_host_mak
echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak
echo "CONFIG_QUORUM=y" >> $config_host_mak
fi
-if test "$virtio_blk_data_plane" = "yes" ; then
- echo 'CONFIG_VIRTIO_BLK_DATA_PLANE=$(CONFIG_VIRTIO)' >> $config_host_mak
-fi
-
if test "$vhdx" = "yes" ; then
echo "CONFIG_VHDX=y" >> $config_host_mak
fi
echo "CPP=$cpp" >> $config_host_mak
echo "OBJCOPY=$objcopy" >> $config_host_mak
echo "LD=$ld" >> $config_host_mak
+echo "NM=$nm" >> $config_host_mak
echo "WINDRES=$windres" >> $config_host_mak
echo "LIBTOOL=$libtool" >> $config_host_mak
echo "CFLAGS=$CFLAGS" >> $config_host_mak
echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak
if test "$sparse" = "yes" ; then
echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_host_mak
+ echo "CPP := REAL_CC=\"\$(CPP)\" cgcc" >> $config_host_mak
+ echo "CXX := REAL_CC=\"\$(CXX)\" cgcc" >> $config_host_mak
echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak
echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
fi
aarch64)
TARGET_BASE_ARCH=arm
bflt="yes"
- gdb_xml_files="aarch64-core.xml aarch64-fpu.xml"
+ gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
;;
cris)
;;
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
;;
+ tricore)
+ ;;
moxie)
;;
or32)
projects / qemu.git / blobdiff