block-qcow2: export highest_allocated through BlockDriverInfo and get_info() (Uri...

[qemu.git] / disas.c

diff --git a/disas.c b/disas.c
index 5048150b1892df777e4cbeb1d2d3362c3d36b785..83c8826b4c9e391a6041afa4f0b22790ab5c1851 100644 (file)
--- a/disas.c
+++ b/disas.c
@@ -14,11 +14,8 @@ struct syminfo *syminfos = NULL;
 /* Get LENGTH bytes from info's buffer, at target address memaddr.
    Transfer them to myaddr.  */
 int
-buffer_read_memory (memaddr, myaddr, length, info)
-     bfd_vma memaddr;
-     bfd_byte *myaddr;
-     int length;
-     struct disassemble_info *info;
+buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
+                   struct disassemble_info *info)
 {
     if (memaddr < info->buffer_vma
         || memaddr + length > info->buffer_vma + info->buffer_length)
@@ -46,10 +43,7 @@ target_read_memory (bfd_vma memaddr,
 /* Print an error message.  We can assume that this is in response to
    an error return from buffer_read_memory.  */
 void
-perror_memory (status, memaddr, info)
-     int status;
-     bfd_vma memaddr;
-     struct disassemble_info *info;
+perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info)
 {
   if (status != EIO)
     /* Can't happen.  */
@@ -69,9 +63,7 @@ perror_memory (status, memaddr, info)
    addresses).  */
 
 void
-generic_print_address (addr, info)
-     bfd_vma addr;
-     struct disassemble_info *info;
+generic_print_address (bfd_vma addr, struct disassemble_info *info)
 {
     (*info->fprintf_func) (info->stream, "0x%" PRIx64, addr);
 }
@@ -79,9 +71,7 @@ generic_print_address (addr, info)
 /* Just return the given address.  */
 
 int
-generic_symbol_at_address (addr, info)
-     bfd_vma addr;
-     struct disassemble_info * info;
+generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info)
 {
   return 1;
 }
@@ -176,15 +166,20 @@ void target_disas(FILE *out, target_ulong code, target_ulong size, int flags)
     print_insn = print_insn_sparc;
 #ifdef TARGET_SPARC64
     disasm_info.mach = bfd_mach_sparc_v9b;
-#endif   
+#endif
 #elif defined(TARGET_PPC)
-    if (flags)
+    if (flags >> 16)
         disasm_info.endian = BFD_ENDIAN_LITTLE;
+    if (flags & 0xFFFF) {
+        /* If we have a precise definitions of the instructions set, use it */
+        disasm_info.mach = flags & 0xFFFF;
+    } else {
 #ifdef TARGET_PPC64
-    disasm_info.mach = bfd_mach_ppc64;
+        disasm_info.mach = bfd_mach_ppc64;
 #else
-    disasm_info.mach = bfd_mach_ppc;
+        disasm_info.mach = bfd_mach_ppc;
 #endif
+    }
     print_insn = print_insn_ppc;
 #elif defined(TARGET_M68K)
     print_insn = print_insn_m68k;
@@ -200,6 +195,9 @@ void target_disas(FILE *out, target_ulong code, target_ulong size, int flags)
 #elif defined(TARGET_ALPHA)
     disasm_info.mach = bfd_mach_alpha;
     print_insn = print_insn_alpha;
+#elif defined(TARGET_CRIS)
+    disasm_info.mach = bfd_mach_cris_v32;
+    print_insn = print_insn_crisv32;
 #else
     fprintf(out, "0x" TARGET_FMT_lx
            ": Asm output not supported on this arch\n", code);
@@ -252,7 +250,7 @@ void disas(FILE *out, void *code, unsigned long size)
 #elif defined(__x86_64__)
     disasm_info.mach = bfd_mach_x86_64;
     print_insn = print_insn_i386;
-#elif defined(__powerpc__)
+#elif defined(_ARCH_PPC)
     print_insn = print_insn_ppc;
 #elif defined(__alpha__)
     print_insn = print_insn_alpha;
@@ -271,6 +269,8 @@ void disas(FILE *out, void *code, unsigned long size)
     print_insn = print_insn_m68k;
 #elif defined(__s390__)
     print_insn = print_insn_s390;
+#elif defined(__hppa__)
+    print_insn = print_insn_hppa;
 #else
     fprintf(out, "0x%lx: Asm output not supported on this arch\n",
            (long) code);
@@ -293,33 +293,17 @@ void disas(FILE *out, void *code, unsigned long size)
 /* Look up symbol for debugging purpose.  Returns "" if unknown. */
 const char *lookup_symbol(target_ulong orig_addr)
 {
-    unsigned int i;
-    /* Hack, because we know this is x86. */
-    Elf32_Sym *sym;
+    const char *symbol = "";
     struct syminfo *s;
-    target_ulong addr;
-   
+
     for (s = syminfos; s; s = s->next) {
-       sym = s->disas_symtab;
-       for (i = 0; i < s->disas_num_syms; i++) {
-           if (sym[i].st_shndx == SHN_UNDEF
-               || sym[i].st_shndx >= SHN_LORESERVE)
-               continue;
-
-           if (ELF_ST_TYPE(sym[i].st_info) != STT_FUNC)
-               continue;
-
-           addr = sym[i].st_value;
-#if defined(TARGET_ARM) || defined (TARGET_MIPS)
-            /* The bottom address bit marks a Thumb or MIPS16 symbol.  */
-            addr &= ~(target_ulong)1;
-#endif
-           if (orig_addr >= addr
-               && orig_addr < addr + sym[i].st_size)
-               return s->disas_strtab + sym[i].st_name;
-       }
+        symbol = s->lookup_symbol(s, orig_addr);
+        if (symbol[0] != '\0') {
+            break;
+        }
     }
-    return "";
+
+    return symbol;
 }
 
 #if !defined(CONFIG_USER_ONLY)
@@ -331,11 +315,8 @@ static int monitor_disas_is_physical;
 static CPUState *monitor_disas_env;
 
 static int
-monitor_read_memory (memaddr, myaddr, length, info)
-     bfd_vma memaddr;
-     bfd_byte *myaddr;
-     int length;
-     struct disassemble_info *info;
+monitor_read_memory (bfd_vma memaddr, bfd_byte *myaddr, int length,
+                     struct disassemble_info *info)
 {
     if (monitor_disas_is_physical) {
         cpu_physical_memory_rw(memaddr, myaddr, length, 0);
@@ -384,6 +365,8 @@ void monitor_disas(CPUState *env,
     print_insn = print_insn_i386;
 #elif defined(TARGET_ARM)
     print_insn = print_insn_arm;
+#elif defined(TARGET_ALPHA)
+    print_insn = print_insn_alpha;
 #elif defined(TARGET_SPARC)
     print_insn = print_insn_sparc;
 #ifdef TARGET_SPARC64