*/
#include "hw.h"
+#include "sysbus.h"
#include "pxa.h"
#define PXA2XX_GPIO_BANKS 4
+typedef struct PXA2xxGPIOInfo PXA2xxGPIOInfo;
struct PXA2xxGPIOInfo {
- qemu_irq *pic;
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+ qemu_irq irq0, irq1, irqX;
int lines;
- CPUState *cpu_env;
- qemu_irq *in;
+ int ncpu;
+ ARMCPU *cpu;
/* XXX: GNU C vectors are more suitable */
uint32_t ilevel[PXA2XX_GPIO_BANKS];
static void pxa2xx_gpio_irq_update(PXA2xxGPIOInfo *s)
{
if (s->status[0] & (1 << 0))
- qemu_irq_raise(s->pic[PXA2XX_PIC_GPIO_0]);
+ qemu_irq_raise(s->irq0);
else
- qemu_irq_lower(s->pic[PXA2XX_PIC_GPIO_0]);
+ qemu_irq_lower(s->irq0);
if (s->status[0] & (1 << 1))
- qemu_irq_raise(s->pic[PXA2XX_PIC_GPIO_1]);
+ qemu_irq_raise(s->irq1);
else
- qemu_irq_lower(s->pic[PXA2XX_PIC_GPIO_1]);
+ qemu_irq_lower(s->irq1);
if ((s->status[0] & ~3) | s->status[1] | s->status[2] | s->status[3])
- qemu_irq_raise(s->pic[PXA2XX_PIC_GPIO_X]);
+ qemu_irq_raise(s->irqX);
else
- qemu_irq_lower(s->pic[PXA2XX_PIC_GPIO_X]);
+ qemu_irq_lower(s->irqX);
}
/* Bitmap of pins used as standby and sleep wake-up sources. */
pxa2xx_gpio_irq_update(s);
/* Wake-up GPIOs */
- if (s->cpu_env->halted && (mask & ~s->dir[bank] & pxa2xx_gpio_wake[bank]))
- cpu_interrupt(s->cpu_env, CPU_INTERRUPT_EXITTB);
+ if (s->cpu->env.halted && (mask & ~s->dir[bank] & pxa2xx_gpio_wake[bank])) {
+ cpu_interrupt(&s->cpu->env, CPU_INTERRUPT_EXITTB);
+ }
}
static void pxa2xx_gpio_handler_update(PXA2xxGPIOInfo *s) {
}
}
-static uint32_t pxa2xx_gpio_read(void *opaque, target_phys_addr_t offset)
+static uint64_t pxa2xx_gpio_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
{
PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
uint32_t ret;
return 0;
}
-static void pxa2xx_gpio_write(void *opaque,
- target_phys_addr_t offset, uint32_t value)
+static void pxa2xx_gpio_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
{
PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
int bank;
}
}
-static CPUReadMemoryFunc * const pxa2xx_gpio_readfn[] = {
- pxa2xx_gpio_read,
- pxa2xx_gpio_read,
- pxa2xx_gpio_read
-};
-
-static CPUWriteMemoryFunc * const pxa2xx_gpio_writefn[] = {
- pxa2xx_gpio_write,
- pxa2xx_gpio_write,
- pxa2xx_gpio_write
+static const MemoryRegionOps pxa_gpio_ops = {
+ .read = pxa2xx_gpio_read,
+ .write = pxa2xx_gpio_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
};
-static void pxa2xx_gpio_save(QEMUFile *f, void *opaque)
+DeviceState *pxa2xx_gpio_init(target_phys_addr_t base,
+ CPUARMState *env, DeviceState *pic, int lines)
{
- PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
- int i;
-
- qemu_put_be32(f, s->lines);
-
- for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
- qemu_put_be32s(f, &s->ilevel[i]);
- qemu_put_be32s(f, &s->olevel[i]);
- qemu_put_be32s(f, &s->dir[i]);
- qemu_put_be32s(f, &s->rising[i]);
- qemu_put_be32s(f, &s->falling[i]);
- qemu_put_be32s(f, &s->status[i]);
- qemu_put_be32s(f, &s->gafr[i * 2 + 0]);
- qemu_put_be32s(f, &s->gafr[i * 2 + 1]);
-
- qemu_put_be32s(f, &s->prev_level[i]);
- }
+ DeviceState *dev;
+
+ dev = qdev_create(NULL, "pxa2xx-gpio");
+ qdev_prop_set_int32(dev, "lines", lines);
+ qdev_prop_set_int32(dev, "ncpu", env->cpu_index);
+ qdev_init_nofail(dev);
+
+ sysbus_mmio_map(sysbus_from_qdev(dev), 0, base);
+ sysbus_connect_irq(sysbus_from_qdev(dev), 0,
+ qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_0));
+ sysbus_connect_irq(sysbus_from_qdev(dev), 1,
+ qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_1));
+ sysbus_connect_irq(sysbus_from_qdev(dev), 2,
+ qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_X));
+
+ return dev;
}
-static int pxa2xx_gpio_load(QEMUFile *f, void *opaque, int version_id)
+static int pxa2xx_gpio_initfn(SysBusDevice *dev)
{
- PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
- int i;
+ PXA2xxGPIOInfo *s;
- if (qemu_get_be32(f) != s->lines)
- return -EINVAL;
+ s = FROM_SYSBUS(PXA2xxGPIOInfo, dev);
- for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
- qemu_get_be32s(f, &s->ilevel[i]);
- qemu_get_be32s(f, &s->olevel[i]);
- qemu_get_be32s(f, &s->dir[i]);
- qemu_get_be32s(f, &s->rising[i]);
- qemu_get_be32s(f, &s->falling[i]);
- qemu_get_be32s(f, &s->status[i]);
- qemu_get_be32s(f, &s->gafr[i * 2 + 0]);
- qemu_get_be32s(f, &s->gafr[i * 2 + 1]);
-
- qemu_get_be32s(f, &s->prev_level[i]);
- }
+ s->cpu = arm_env_get_cpu(qemu_get_cpu(s->ncpu));
+
+ qdev_init_gpio_in(&dev->qdev, pxa2xx_gpio_set, s->lines);
+ qdev_init_gpio_out(&dev->qdev, s->handler, s->lines);
+
+ memory_region_init_io(&s->iomem, &pxa_gpio_ops, s, "pxa2xx-gpio", 0x1000);
+ sysbus_init_mmio(dev, &s->iomem);
+ sysbus_init_irq(dev, &s->irq0);
+ sysbus_init_irq(dev, &s->irq1);
+ sysbus_init_irq(dev, &s->irqX);
return 0;
}
-PXA2xxGPIOInfo *pxa2xx_gpio_init(target_phys_addr_t base,
- CPUState *env, qemu_irq *pic, int lines)
+/*
+ * Registers a callback to notify on GPLR reads. This normally
+ * shouldn't be needed but it is used for the hack on Spitz machines.
+ */
+void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler)
{
- int iomemtype;
- PXA2xxGPIOInfo *s;
+ PXA2xxGPIOInfo *s = FROM_SYSBUS(PXA2xxGPIOInfo, sysbus_from_qdev(dev));
+ s->read_notify = handler;
+}
- s = (PXA2xxGPIOInfo *)
- qemu_mallocz(sizeof(PXA2xxGPIOInfo));
- memset(s, 0, sizeof(PXA2xxGPIOInfo));
- s->pic = pic;
- s->lines = lines;
- s->cpu_env = env;
- s->in = qemu_allocate_irqs(pxa2xx_gpio_set, s, lines);
+static const VMStateDescription vmstate_pxa2xx_gpio_regs = {
+ .name = "pxa2xx-gpio",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField []) {
+ VMSTATE_INT32(lines, PXA2xxGPIOInfo),
+ VMSTATE_UINT32_ARRAY(ilevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(olevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(dir, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(rising, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(falling, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(status, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(gafr, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS * 2),
+ VMSTATE_END_OF_LIST(),
+ },
+};
- iomemtype = cpu_register_io_memory(pxa2xx_gpio_readfn,
- pxa2xx_gpio_writefn, s);
- cpu_register_physical_memory(base, 0x00001000, iomemtype);
+static Property pxa2xx_gpio_properties[] = {
+ DEFINE_PROP_INT32("lines", PXA2xxGPIOInfo, lines, 0),
+ DEFINE_PROP_INT32("ncpu", PXA2xxGPIOInfo, ncpu, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
- register_savevm(NULL, "pxa2xx_gpio", 0, 0,
- pxa2xx_gpio_save, pxa2xx_gpio_load, s);
+static void pxa2xx_gpio_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
- return s;
+ k->init = pxa2xx_gpio_initfn;
+ dc->desc = "PXA2xx GPIO controller";
+ dc->props = pxa2xx_gpio_properties;
}
-qemu_irq *pxa2xx_gpio_in_get(PXA2xxGPIOInfo *s)
-{
- return s->in;
-}
+static TypeInfo pxa2xx_gpio_info = {
+ .name = "pxa2xx-gpio",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(PXA2xxGPIOInfo),
+ .class_init = pxa2xx_gpio_class_init,
+};
-void pxa2xx_gpio_out_set(PXA2xxGPIOInfo *s,
- int line, qemu_irq handler)
+static void pxa2xx_gpio_register_types(void)
{
- if (line >= s->lines) {
- printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
- return;
- }
-
- s->handler[line] = handler;
+ type_register_static(&pxa2xx_gpio_info);
}
-/*
- * Registers a callback to notify on GPLR reads. This normally
- * shouldn't be needed but it is used for the hack on Spitz machines.
- */
-void pxa2xx_gpio_read_notifier(PXA2xxGPIOInfo *s, qemu_irq handler)
-{
- s->read_notify = handler;
-}
+type_init(pxa2xx_gpio_register_types)
projects / qemu.git / blobdiff