#include "monitor.h"
#include "qemu-queue.h"
#include "sysbus.h"
+#include "trace.h"
#include "virtio-serial.h"
/* The virtio-serial bus on top of which the ports will ride as devices */
/* Arrays of ivqs and ovqs: one per port */
VirtQueue **ivqs, **ovqs;
- VirtIOSerialBus *bus;
+ VirtIOSerialBus bus;
DeviceState *qdev;
}
len = iov_from_buf(elem.in_sg, elem.in_num,
- buf + offset, size - offset);
+ buf + offset, 0, size - offset);
offset += len;
virtqueue_push(vq, &elem, len);
return offset;
}
-static void do_flush_queued_data(VirtIOSerialPort *port, VirtQueue *vq,
- VirtIODevice *vdev, bool discard)
+static void discard_vq_data(VirtQueue *vq, VirtIODevice *vdev)
{
VirtQueueElement elem;
- assert(port || discard);
+ if (!virtio_queue_ready(vq)) {
+ return;
+ }
+ while (virtqueue_pop(vq, &elem)) {
+ virtqueue_push(vq, &elem, 0);
+ }
+ virtio_notify(vdev, vq);
+}
+
+static void do_flush_queued_data(VirtIOSerialPort *port, VirtQueue *vq,
+ VirtIODevice *vdev)
+{
+ VirtIOSerialPortInfo *info;
+
+ assert(port);
assert(virtio_queue_ready(vq));
- while ((discard || !port->throttled) && virtqueue_pop(vq, &elem)) {
- uint8_t *buf;
- size_t ret, buf_size;
+ info = DO_UPCAST(VirtIOSerialPortInfo, qdev, port->dev.info);
- if (!discard) {
- buf_size = iov_size(elem.out_sg, elem.out_num);
- buf = qemu_malloc(buf_size);
- ret = iov_to_buf(elem.out_sg, elem.out_num, buf, 0, buf_size);
+ while (!port->throttled) {
+ unsigned int i;
- port->info->have_data(port, buf, ret);
- qemu_free(buf);
+ /* Pop an elem only if we haven't left off a previous one mid-way */
+ if (!port->elem.out_num) {
+ if (!virtqueue_pop(vq, &port->elem)) {
+ break;
+ }
+ port->iov_idx = 0;
+ port->iov_offset = 0;
}
- virtqueue_push(vq, &elem, 0);
+
+ for (i = port->iov_idx; i < port->elem.out_num; i++) {
+ size_t buf_size;
+ ssize_t ret;
+
+ buf_size = port->elem.out_sg[i].iov_len - port->iov_offset;
+ ret = info->have_data(port,
+ port->elem.out_sg[i].iov_base
+ + port->iov_offset,
+ buf_size);
+ if (ret < 0 && ret != -EAGAIN) {
+ /* We don't handle any other type of errors here */
+ abort();
+ }
+ if (ret == -EAGAIN || (ret >= 0 && ret < buf_size)) {
+ virtio_serial_throttle_port(port, true);
+ port->iov_idx = i;
+ if (ret > 0) {
+ port->iov_offset += ret;
+ }
+ break;
+ }
+ port->iov_offset = 0;
+ }
+ if (port->throttled) {
+ break;
+ }
+ virtqueue_push(vq, &port->elem, 0);
+ port->elem.out_num = 0;
}
virtio_notify(vdev, vq);
}
-static void flush_queued_data(VirtIOSerialPort *port, bool discard)
+static void flush_queued_data(VirtIOSerialPort *port)
{
assert(port);
if (!virtio_queue_ready(port->ovq)) {
return;
}
- do_flush_queued_data(port, port->ovq, &port->vser->vdev, discard);
+ do_flush_queued_data(port, port->ovq, &port->vser->vdev);
}
static size_t send_control_msg(VirtIOSerialPort *port, void *buf, size_t len)
stw_p(&cpkt.event, event);
stw_p(&cpkt.value, value);
+ trace_virtio_serial_send_control_event(port->id, event, value);
return send_control_msg(port, &cpkt, sizeof(cpkt));
}
* consume, reset the throttling flag and discard the data.
*/
port->throttled = false;
- flush_queued_data(port, true);
+ discard_vq_data(port->ovq, &port->vser->vdev);
send_control_event(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
return 0;
}
+static void flush_queued_data_bh(void *opaque)
+{
+ VirtIOSerialPort *port = opaque;
+
+ flush_queued_data(port);
+}
+
void virtio_serial_throttle_port(VirtIOSerialPort *port, bool throttle)
{
if (!port) {
return;
}
+ trace_virtio_serial_throttle_port(port->id, throttle);
port->throttled = throttle;
if (throttle) {
return;
}
-
- flush_queued_data(port, false);
+ qemu_bh_schedule(port->bh);
}
/* Guest wants to notify us of some event */
static void handle_control_message(VirtIOSerial *vser, void *buf, size_t len)
{
struct VirtIOSerialPort *port;
+ struct VirtIOSerialPortInfo *info;
struct virtio_console_control cpkt, *gcpkt;
uint8_t *buffer;
size_t buffer_len;
cpkt.event = lduw_p(&gcpkt->event);
cpkt.value = lduw_p(&gcpkt->value);
- port = find_port_by_id(vser, ldl_p(&gcpkt->id));
- if (!port && cpkt.event != VIRTIO_CONSOLE_DEVICE_READY)
- return;
+ trace_virtio_serial_handle_control_message(cpkt.event, cpkt.value);
- switch(cpkt.event) {
- case VIRTIO_CONSOLE_DEVICE_READY:
+ if (cpkt.event == VIRTIO_CONSOLE_DEVICE_READY) {
if (!cpkt.value) {
- error_report("virtio-serial-bus: Guest failure in adding device %s\n",
- vser->bus->qbus.name);
- break;
+ error_report("virtio-serial-bus: Guest failure in adding device %s",
+ vser->bus.qbus.name);
+ return;
}
/*
* The device is up, we can now tell the device about all the
QTAILQ_FOREACH(port, &vser->ports, next) {
send_control_event(port, VIRTIO_CONSOLE_PORT_ADD, 1);
}
- break;
+ return;
+ }
+ port = find_port_by_id(vser, ldl_p(&gcpkt->id));
+ if (!port) {
+ error_report("virtio-serial-bus: Unexpected port id %u for device %s",
+ ldl_p(&gcpkt->id), vser->bus.qbus.name);
+ return;
+ }
+
+ trace_virtio_serial_handle_control_message_port(port->id);
+
+ info = DO_UPCAST(VirtIOSerialPortInfo, qdev, port->dev.info);
+
+ switch(cpkt.event) {
case VIRTIO_CONSOLE_PORT_READY:
if (!cpkt.value) {
- error_report("virtio-serial-bus: Guest failure in adding port %u for device %s\n",
- port->id, vser->bus->qbus.name);
+ error_report("virtio-serial-bus: Guest failure in adding port %u for device %s",
+ port->id, vser->bus.qbus.name);
break;
}
/*
* this port is a console port so that the guest can hook it
* up to hvc.
*/
- if (port->is_console) {
+ if (info->is_console) {
send_control_event(port, VIRTIO_CONSOLE_CONSOLE_PORT, 1);
}
stw_p(&cpkt.value, 1);
buffer_len = sizeof(cpkt) + strlen(port->name) + 1;
- buffer = qemu_malloc(buffer_len);
+ buffer = g_malloc(buffer_len);
memcpy(buffer, &cpkt, sizeof(cpkt));
memcpy(buffer + sizeof(cpkt), port->name, strlen(port->name));
buffer[buffer_len - 1] = 0;
send_control_msg(port, buffer, buffer_len);
- qemu_free(buffer);
+ g_free(buffer);
}
if (port->host_connected) {
* initialised. If some app is interested in knowing about
* this event, let it know.
*/
- if (port->info->guest_ready) {
- port->info->guest_ready(port);
+ if (info->guest_ready) {
+ info->guest_ready(port);
}
break;
case VIRTIO_CONSOLE_PORT_OPEN:
port->guest_connected = cpkt.value;
- if (cpkt.value && port->info->guest_open) {
+ if (cpkt.value && info->guest_open) {
/* Send the guest opened notification if an app is interested */
- port->info->guest_open(port);
+ info->guest_open(port);
}
- if (!cpkt.value && port->info->guest_close) {
+ if (!cpkt.value && info->guest_close) {
/* Send the guest closed notification if an app is interested */
- port->info->guest_close(port);
+ info->guest_close(port);
}
break;
}
* if the size of the buf differs
*/
if (cur_len > len) {
- qemu_free(buf);
+ g_free(buf);
- buf = qemu_malloc(cur_len);
+ buf = g_malloc(cur_len);
len = cur_len;
}
copied = iov_to_buf(elem.out_sg, elem.out_num, buf, 0, len);
handle_control_message(vser, buf, copied);
virtqueue_push(vq, &elem, 0);
}
- qemu_free(buf);
+ g_free(buf);
virtio_notify(vdev, vq);
}
{
VirtIOSerial *vser;
VirtIOSerialPort *port;
- bool discard;
+ VirtIOSerialPortInfo *info;
vser = DO_UPCAST(VirtIOSerial, vdev, vdev);
port = find_port_by_vq(vser, vq);
+ info = port ? DO_UPCAST(VirtIOSerialPortInfo, qdev, port->dev.info) : NULL;
- discard = false;
- if (!port || !port->host_connected || !port->info->have_data) {
- discard = true;
+ if (!port || !port->host_connected || !info->have_data) {
+ discard_vq_data(vq, vdev);
+ return;
}
- if (!discard && port->throttled) {
+ if (!port->throttled) {
+ do_flush_queued_data(port, vq, vdev);
return;
}
-
- do_flush_queued_data(port, vq, vdev, discard);
}
static void handle_input(VirtIODevice *vdev, VirtQueue *vq)
vser = DO_UPCAST(VirtIOSerial, vdev, vdev);
- if (vser->bus->max_nr_ports > 1) {
+ if (vser->bus.max_nr_ports > 1) {
features |= (1 << VIRTIO_CONSOLE_F_MULTIPORT);
}
return features;
VirtIOSerial *s = opaque;
VirtIOSerialPort *port;
uint32_t nr_active_ports;
- unsigned int i;
+ unsigned int i, max_nr_ports;
/* The virtio device */
virtio_save(&s->vdev, f);
qemu_put_be32s(f, &s->config.max_nr_ports);
/* The ports map */
-
- for (i = 0; i < (s->config.max_nr_ports + 31) / 32; i++) {
+ max_nr_ports = tswap32(s->config.max_nr_ports);
+ for (i = 0; i < (max_nr_ports + 31) / 32; i++) {
qemu_put_be32s(f, &s->ports_map[i]);
}
* Items in struct VirtIOSerialPort.
*/
QTAILQ_FOREACH(port, &s->ports, next) {
+ uint32_t elem_popped;
+
qemu_put_be32s(f, &port->id);
qemu_put_byte(f, port->guest_connected);
qemu_put_byte(f, port->host_connected);
+
+ elem_popped = 0;
+ if (port->elem.out_num) {
+ elem_popped = 1;
+ }
+ qemu_put_be32s(f, &elem_popped);
+ if (elem_popped) {
+ qemu_put_be32s(f, &port->iov_idx);
+ qemu_put_be64s(f, &port->iov_offset);
+
+ qemu_put_buffer(f, (unsigned char *)&port->elem,
+ sizeof(port->elem));
+ }
}
}
uint32_t max_nr_ports, nr_active_ports, ports_map;
unsigned int i;
- if (version_id > 2) {
+ if (version_id > 3) {
return -EINVAL;
}
qemu_get_be16s(f, &s->config.rows);
qemu_get_be32s(f, &max_nr_ports);
- if (max_nr_ports > s->config.max_nr_ports) {
+ tswap32s(&max_nr_ports);
+ if (max_nr_ports > tswap32(s->config.max_nr_ports)) {
/* Source could have had more ports than us. Fail migration. */
return -EINVAL;
}
id = qemu_get_be32(f);
port = find_port_by_id(s, id);
+ if (!port) {
+ return -EINVAL;
+ }
port->guest_connected = qemu_get_byte(f);
host_connected = qemu_get_byte(f);
send_control_event(port, VIRTIO_CONSOLE_PORT_OPEN,
port->host_connected);
}
+
+ if (version_id > 2) {
+ uint32_t elem_popped;
+
+ qemu_get_be32s(f, &elem_popped);
+ if (elem_popped) {
+ qemu_get_be32s(f, &port->iov_idx);
+ qemu_get_be64s(f, &port->iov_offset);
+
+ qemu_get_buffer(f, (unsigned char *)&port->elem,
+ sizeof(port->elem));
+ virtqueue_map_sg(port->elem.in_sg, port->elem.in_addr,
+ port->elem.in_num, 1);
+ virtqueue_map_sg(port->elem.out_sg, port->elem.out_addr,
+ port->elem.out_num, 1);
+
+ /*
+ * Port was throttled on source machine. Let's
+ * unthrottle it here so data starts flowing again.
+ */
+ virtio_serial_throttle_port(port, false);
+ }
+ }
}
return 0;
}
.name = "virtio-serial-bus",
.size = sizeof(VirtIOSerialBus),
.print_dev = virtser_bus_dev_print,
+ .props = (Property[]) {
+ DEFINE_PROP_UINT32("nr", VirtIOSerialPort, id, VIRTIO_CONSOLE_BAD_ID),
+ DEFINE_PROP_STRING("name", VirtIOSerialPort, name),
+ DEFINE_PROP_END_OF_LIST()
+ }
};
-static VirtIOSerialBus *virtser_bus_new(DeviceState *dev)
-{
- VirtIOSerialBus *bus;
-
- bus = FROM_QBUS(VirtIOSerialBus, qbus_create(&virtser_bus_info, dev, NULL));
- bus->qbus.allow_hotplug = 1;
-
- return bus;
-}
-
static void virtser_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent)
{
- VirtIOSerialDevice *dev = DO_UPCAST(VirtIOSerialDevice, qdev, qdev);
- VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, &dev->qdev);
+ VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, qdev);
- monitor_printf(mon, "%*s dev-prop-int: id: %u\n",
- indent, "", port->id);
- monitor_printf(mon, "%*s dev-prop-int: guest_connected: %d\n",
- indent, "", port->guest_connected);
- monitor_printf(mon, "%*s dev-prop-int: host_connected: %d\n",
- indent, "", port->host_connected);
- monitor_printf(mon, "%*s dev-prop-int: throttled: %d\n",
- indent, "", port->throttled);
+ monitor_printf(mon, "%*sport %d, guest %s, host %s, throttle %s\n",
+ indent, "", port->id,
+ port->guest_connected ? "on" : "off",
+ port->host_connected ? "on" : "off",
+ port->throttled ? "on" : "off");
}
/* This function is only used if a port id is not provided by the user */
static uint32_t find_free_port_id(VirtIOSerial *vser)
{
- unsigned int i;
+ unsigned int i, max_nr_ports;
- for (i = 0; i < (vser->config.max_nr_ports + 31) / 32; i++) {
+ max_nr_ports = tswap32(vser->config.max_nr_ports);
+ for (i = 0; i < (max_nr_ports + 31) / 32; i++) {
uint32_t map, bit;
map = vser->ports_map[i];
port = find_port_by_id(vser, port_id);
/* Flush out any unconsumed buffers first */
- flush_queued_data(port, true);
+ discard_vq_data(port->ovq, &port->vser->vdev);
send_control_event(port, VIRTIO_CONSOLE_PORT_REMOVE, 1);
}
static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base)
{
- VirtIOSerialDevice *dev = DO_UPCAST(VirtIOSerialDevice, qdev, qdev);
+ VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, qdev);
VirtIOSerialPortInfo *info = DO_UPCAST(VirtIOSerialPortInfo, qdev, base);
- VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, &dev->qdev);
VirtIOSerialBus *bus = DO_UPCAST(VirtIOSerialBus, qbus, qdev->parent_bus);
- int ret;
+ int ret, max_nr_ports;
bool plugging_port0;
port->vser = bus->vser;
+ port->bh = qemu_bh_new(flush_queued_data_bh, port);
/*
* Is the first console port we're seeing? If so, put it up at
* location 0. This is done for backward compatibility (old
* kernel, new qemu).
*/
- plugging_port0 = port->is_console && !find_port_by_id(port->vser, 0);
+ plugging_port0 = info->is_console && !find_port_by_id(port->vser, 0);
if (find_port_by_id(port->vser, port->id)) {
- error_report("virtio-serial-bus: A port already exists at id %u\n",
+ error_report("virtio-serial-bus: A port already exists at id %u",
port->id);
return -1;
}
} else {
port->id = find_free_port_id(port->vser);
if (port->id == VIRTIO_CONSOLE_BAD_ID) {
- error_report("virtio-serial-bus: Maximum port limit for this device reached\n");
+ error_report("virtio-serial-bus: Maximum port limit for this device reached");
return -1;
}
}
}
- if (port->id >= port->vser->config.max_nr_ports) {
- error_report("virtio-serial-bus: Out-of-range port id specified, max. allowed: %u\n",
- port->vser->config.max_nr_ports - 1);
+ max_nr_ports = tswap32(port->vser->config.max_nr_ports);
+ if (port->id >= max_nr_ports) {
+ error_report("virtio-serial-bus: Out-of-range port id specified, max. allowed: %u",
+ max_nr_ports - 1);
return -1;
}
- dev->info = info;
- ret = info->init(dev);
+ ret = info->init(port);
if (ret) {
return ret;
}
port->guest_connected = true;
}
+ port->elem.out_num = 0;
+
QTAILQ_INSERT_TAIL(&port->vser->ports, port, next);
port->ivq = port->vser->ivqs[port->id];
port->ovq = port->vser->ovqs[port->id];
static int virtser_port_qdev_exit(DeviceState *qdev)
{
- VirtIOSerialDevice *dev = DO_UPCAST(VirtIOSerialDevice, qdev, qdev);
- VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, &dev->qdev);
+ VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, qdev);
+ VirtIOSerialPortInfo *info = DO_UPCAST(VirtIOSerialPortInfo, qdev,
+ port->dev.info);
VirtIOSerial *vser = port->vser;
+ qemu_bh_delete(port->bh);
remove_port(port->vser, port->id);
QTAILQ_REMOVE(&vser->ports, port, next);
- if (port->info->exit)
- port->info->exit(dev);
-
+ if (info->exit) {
+ info->exit(port);
+ }
return 0;
}
qdev_register(&info->qdev);
}
-VirtIODevice *virtio_serial_init(DeviceState *dev, uint32_t max_nr_ports)
+VirtIODevice *virtio_serial_init(DeviceState *dev, virtio_serial_conf *conf)
{
VirtIOSerial *vser;
VirtIODevice *vdev;
uint32_t i, max_supported_ports;
- if (!max_nr_ports)
+ if (!conf->max_virtserial_ports)
return NULL;
/* Each port takes 2 queues, and one pair is for the control queue */
max_supported_ports = VIRTIO_PCI_QUEUE_MAX / 2 - 1;
- if (max_nr_ports > max_supported_ports) {
+ if (conf->max_virtserial_ports > max_supported_ports) {
error_report("maximum ports supported: %u", max_supported_ports);
return NULL;
}
vser = DO_UPCAST(VirtIOSerial, vdev, vdev);
/* Spawn a new virtio-serial bus on which the ports will ride as devices */
- vser->bus = virtser_bus_new(dev);
- vser->bus->vser = vser;
+ qbus_create_inplace(&vser->bus.qbus, &virtser_bus_info, dev, NULL);
+ vser->bus.qbus.allow_hotplug = 1;
+ vser->bus.vser = vser;
QTAILQ_INIT(&vser->ports);
- vser->bus->max_nr_ports = max_nr_ports;
- vser->ivqs = qemu_malloc(max_nr_ports * sizeof(VirtQueue *));
- vser->ovqs = qemu_malloc(max_nr_ports * sizeof(VirtQueue *));
+ vser->bus.max_nr_ports = conf->max_virtserial_ports;
+ vser->ivqs = g_malloc(conf->max_virtserial_ports * sizeof(VirtQueue *));
+ vser->ovqs = g_malloc(conf->max_virtserial_ports * sizeof(VirtQueue *));
/* Add a queue for host to guest transfers for port 0 (backward compat) */
vser->ivqs[0] = virtio_add_queue(vdev, 128, handle_input);
/* control queue: guest to host */
vser->c_ovq = virtio_add_queue(vdev, 32, control_out);
- for (i = 1; i < vser->bus->max_nr_ports; i++) {
+ for (i = 1; i < vser->bus.max_nr_ports; i++) {
/* Add a per-port queue for host to guest transfers */
vser->ivqs[i] = virtio_add_queue(vdev, 128, handle_input);
/* Add a per-per queue for guest to host transfers */
vser->ovqs[i] = virtio_add_queue(vdev, 128, handle_output);
}
- vser->config.max_nr_ports = max_nr_ports;
- vser->ports_map = qemu_mallocz(((max_nr_ports + 31) / 32)
+ vser->config.max_nr_ports = tswap32(conf->max_virtserial_ports);
+ vser->ports_map = g_malloc0(((conf->max_virtserial_ports + 31) / 32)
* sizeof(vser->ports_map[0]));
/*
* Reserve location 0 for a console port for backward compat
* Register for the savevm section with the virtio-console name
* to preserve backward compat
*/
- register_savevm(dev, "virtio-console", -1, 2, virtio_serial_save,
+ register_savevm(dev, "virtio-console", -1, 3, virtio_serial_save,
virtio_serial_load, vser);
return vdev;
unregister_savevm(vser->qdev, "virtio-console", vser);
- qemu_free(vser->ivqs);
- qemu_free(vser->ovqs);
- qemu_free(vser->ports_map);
+ g_free(vser->ivqs);
+ g_free(vser->ovqs);
+ g_free(vser->ports_map);
virtio_cleanup(vdev);
}
projects / qemu.git / blobdiff