# @encrypt: details about encryption parameters; only set if image
# is encrypted (since 2.10)
#
+# @bitmaps: A list of qcow2 bitmap details (since 4.0)
+#
# Since: 1.7
##
{ 'struct': 'ImageInfoSpecificQCow2',
'*lazy-refcounts': 'bool',
'*corrupt': 'bool',
'refcount-bits': 'int',
- '*encrypt': 'ImageInfoSpecificQCow2Encryption'
+ '*encrypt': 'ImageInfoSpecificQCow2Encryption',
+ '*bitmaps': ['Qcow2BitmapInfo']
} }
##
#
# An enumeration of possible states that a dirty bitmap can report to the user.
#
-# @frozen: The bitmap is currently in-use by a backup operation or block job,
-# and is immutable.
+# @frozen: The bitmap is currently in-use by some operation and is immutable.
+# If the bitmap was @active prior to the operation, new writes by the
+# guest are being recorded in a temporary buffer, and will not be lost.
+# Generally, bitmaps are cleared on successful use in an operation and
+# the temporary buffer is committed into the bitmap. On failure, the
+# temporary buffer is merged back into the bitmap without first
+# clearing it.
+# Please refer to the documentation for each bitmap-using operation,
+# See also @blockdev-backup, @drive-backup.
#
-# @disabled: The bitmap is currently in-use by an internal operation and is
-# read-only. It can still be deleted.
+# @disabled: The bitmap is not currently recording new writes by the guest.
+# This is requested explicitly via @block-dirty-bitmap-disable.
+# It can still be cleared, deleted, or used for backup operations.
#
# @active: The bitmap is actively monitoring for new writes, and can be cleared,
# deleted, or used for backup operations.
#
-# @locked: The bitmap is currently in-use by some operation and can not be
-# cleared, deleted, or used for backup operations. (Since 2.12)
+# @locked: The bitmap is currently in-use by some operation and is immutable.
+# If the bitmap was @active prior to the operation, it is still
+# recording new writes. If the bitmap was @disabled, it is not
+# recording new writes. (Since 2.12)
#
# Since: 2.4
##
#
# @status: current status of the dirty bitmap (since 2.4)
#
+# @persistent: true if the bitmap will eventually be flushed to persistent
+# storage (since 4.0)
+#
# Since: 1.3
##
{ 'struct': 'BlockDirtyInfo',
'data': {'*name': 'str', 'count': 'int', 'granularity': 'uint32',
- 'status': 'DirtyBitmapStatus'} }
+ 'status': 'DirtyBitmapStatus', 'persistent': 'bool' } }
+
+##
+# @Qcow2BitmapInfoFlags:
+#
+# An enumeration of flags that a bitmap can report to the user.
+#
+# @in-use: This flag is set by any process actively modifying the qcow2 file,
+# and cleared when the updated bitmap is flushed to the qcow2 image.
+# The presence of this flag in an offline image means that the bitmap
+# was not saved correctly after its last usage, and may contain
+# inconsistent data.
+#
+# @auto: The bitmap must reflect all changes of the virtual disk by any
+# application that would write to this qcow2 file.
+#
+# Since: 4.0
+##
+{ 'enum': 'Qcow2BitmapInfoFlags',
+ 'data': ['in-use', 'auto'] }
+
+##
+# @Qcow2BitmapInfo:
+#
+# Qcow2 bitmap information.
+#
+# @name: the name of the bitmap
+#
+# @granularity: granularity of the bitmap in bytes
+#
+# @flags: flags of the bitmap
+#
+# Since: 4.0
+##
+{ 'struct': 'Qcow2BitmapInfo',
+ 'data': {'name': 'str', 'granularity': 'uint32',
+ 'flags': ['Qcow2BitmapInfoFlags'] } }
##
# @BlockLatencyHistogramInfo:
# @block-dirty-bitmap-merge:
#
# Merge dirty bitmaps listed in @bitmaps to the @target dirty bitmap.
-# The @bitmaps dirty bitmaps are unchanged.
+# Dirty bitmaps in @bitmaps will be unchanged, except if it also appears
+# as the @target bitmap. Any bits already set in @target will still be
+# set after the merge, i.e., this operation does not clear the target.
# On error, @target is unchanged.
#
+# The resulting bitmap will count as dirty any clusters that were dirty in any
+# of the source bitmaps. This can be used to achieve backup checkpoints, or in
+# simpler usages, to copy bitmaps.
+#
# Returns: nothing on success
# If @node is not a valid block device, DeviceNotFound
# If any bitmap in @bitmaps or @target is not found, GenericError
##
# @x-debug-block-dirty-bitmap-sha256:
#
-# Get bitmap SHA256
+# Get bitmap SHA256.
#
# Returns: BlockDirtyBitmapSha256 on success
# If @node is not a valid block device, DeviceNotFound
##
# @BlockdevQcow2EncryptionFormat:
-# @aes: AES-CBC with plain64 initialization venctors
+# @aes: AES-CBC with plain64 initialization vectors
#
# Since: 2.10
##
'size': 'size',
'*cluster-size' : 'size' } }
+##
+# @BlockdevVmdkSubformat:
+#
+# Subformat options for VMDK images
+#
+# @monolithicSparse: Single file image with sparse cluster allocation
+#
+# @monolithicFlat: Single flat data image and a descriptor file
+#
+# @twoGbMaxExtentSparse: Data is split into 2GB (per virtual LBA) sparse extent
+# files, in addition to a descriptor file
+#
+# @twoGbMaxExtentFlat: Data is split into 2GB (per virtual LBA) flat extent
+# files, in addition to a descriptor file
+#
+# @streamOptimized: Single file image sparse cluster allocation, optimized
+# for streaming over network.
+#
+# Since: 4.0
+##
+{ 'enum': 'BlockdevVmdkSubformat',
+ 'data': [ 'monolithicSparse', 'monolithicFlat', 'twoGbMaxExtentSparse',
+ 'twoGbMaxExtentFlat', 'streamOptimized'] }
+
+##
+# @BlockdevVmdkAdapterType:
+#
+# Adapter type info for VMDK images
+#
+# Since: 4.0
+##
+{ 'enum': 'BlockdevVmdkAdapterType',
+ 'data': [ 'ide', 'buslogic', 'lsilogic', 'legacyESX'] }
+
+##
+# @BlockdevCreateOptionsVmdk:
+#
+# Driver specific image creation options for VMDK.
+#
+# @file Where to store the new image file. This refers to the image
+# file for monolithcSparse and streamOptimized format, or the
+# descriptor file for other formats.
+# @size Size of the virtual disk in bytes
+# @extents Where to store the data extents. Required for monolithcFlat,
+# twoGbMaxExtentSparse and twoGbMaxExtentFlat formats. For
+# monolithicFlat, only one entry is required; for
+# twoGbMaxExtent* formats, the number of entries required is
+# calculated as extent_number = virtual_size / 2GB. Providing
+# more extents than will be used is an error.
+# @subformat The subformat of the VMDK image. Default: "monolithicSparse".
+# @backing-file The path of backing file. Default: no backing file is used.
+# @adapter-type The adapter type used to fill in the descriptor. Default: ide.
+# @hwversion Hardware version. The meaningful options are "4" or "6".
+# Default: "4".
+# @zeroed-grain Whether to enable zeroed-grain feature for sparse subformats.
+# Default: false.
+#
+# Since: 4.0
+##
+{ 'struct': 'BlockdevCreateOptionsVmdk',
+ 'data': { 'file': 'BlockdevRef',
+ 'size': 'size',
+ '*extents': ['BlockdevRef'],
+ '*subformat': 'BlockdevVmdkSubformat',
+ '*backing-file': 'str',
+ '*adapter-type': 'BlockdevVmdkAdapterType',
+ '*hwversion': 'str',
+ '*zeroed-grain': 'bool' } }
+
+
##
# @SheepdogRedundancyType:
#
'ssh': 'BlockdevCreateOptionsSsh',
'vdi': 'BlockdevCreateOptionsVdi',
'vhdx': 'BlockdevCreateOptionsVhdx',
+ 'vmdk': 'BlockdevCreateOptionsVmdk',
'vpc': 'BlockdevCreateOptionsVpc'
} }
projects / qemu.git / blobdiff