# QAPI block definitions
{ 'include': 'qapi/block.json' }
+# QAPI event definitions
+{ 'include': 'qapi/event.json' }
+
+# Tracing commands
+{ 'include': 'qapi/trace.json' }
+
##
# LostTickPolicy:
#
#
# @filename: the filename of the character device
#
+# @frontend-open: shows whether the frontend device attached to this backend
+# (eg. with the chardev=... option) is in open or closed state
+# (since 2.1)
+#
# Notes: @filename is encoded using the QEMU command line character device
# encoding. See the QEMU man page for details.
#
# Since: 0.14.0
##
-{ 'type': 'ChardevInfo', 'data': {'label': 'str', 'filename': 'str'} }
+{ 'type': 'ChardevInfo', 'data': {'label': 'str',
+ 'filename': 'str',
+ 'frontend-open': 'bool'} }
##
# @query-chardev:
#
# @host: IP address
#
-# @service: The service name of vnc port. This may depend on the host system's
-# service database so symbolic names should not be relied on.
+# @service: The service name of the vnc port. This may depend on the host
+# system's service database so symbolic names should not be relied
+# on.
#
# @family: address family
#
##
{ 'type': 'VncClientInfo',
'base': 'VncBasicInfo',
- 'data': { '*x509_dname' : 'str', '*sasl_username': 'str' } }
+ 'data': { '*x509_dname': 'str', '*sasl_username': 'str' } }
##
# @VncInfo:
##
# @inject-nmi:
#
-# Injects an Non-Maskable Interrupt into all guest's VCPUs.
+# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs (ppc64).
#
# Returns: If successful, nothing
#
# Since: 0.14.0
#
-# Notes: Only x86 Virtual Machines support this command.
+# Note: prior to 2.1, this command was only supported for x86 and s390 VMs
##
{ 'command': 'inject-nmi' }
#
# Change the VNC server password.
#
-# @target: the new password to use with VNC authentication
+# @password: the new password to use with VNC authentication
#
# Since: 1.1
#
#
# @name: the name of the property
# @type: the typename of the property
+# @description: #optional if specified, the description of the property.
+# (since 2.2)
#
# Since: 1.2
##
{ 'type': 'DevicePropertyInfo',
- 'data': { 'name': 'str', 'type': 'str' } }
+ 'data': { 'name': 'str', 'type': 'str', '*description': 'str' } }
##
# @device-list-properties:
'*localaddr': 'str',
'*udp': 'str' } }
+##
+# @NetdevL2TPv3Options
+#
+# Connect the VLAN to Ethernet over L2TPv3 Static tunnel
+#
+# @src: source address
+#
+# @dst: destination address
+#
+# @srcport: #optional source port - mandatory for udp, optional for ip
+#
+# @dstport: #optional destination port - mandatory for udp, optional for ip
+#
+# @ipv6: #optional - force the use of ipv6
+#
+# @udp: #optional - use the udp version of l2tpv3 encapsulation
+#
+# @cookie64: #optional - use 64 bit coookies
+#
+# @counter: #optional have sequence counter
+#
+# @pincounter: #optional pin sequence counter to zero -
+# workaround for buggy implementations or
+# networks with packet reorder
+#
+# @txcookie: #optional 32 or 64 bit transmit cookie
+#
+# @rxcookie: #optional 32 or 64 bit receive cookie
+#
+# @txsession: 32 bit transmit session
+#
+# @rxsession: #optional 32 bit receive session - if not specified
+# set to the same value as transmit
+#
+# @offset: #optional additional offset - allows the insertion of
+# additional application-specific data before the packet payload
+#
+# Since 2.1
+##
+{ 'type': 'NetdevL2TPv3Options',
+ 'data': {
+ 'src': 'str',
+ 'dst': 'str',
+ '*srcport': 'str',
+ '*dstport': 'str',
+ '*ipv6': 'bool',
+ '*udp': 'bool',
+ '*cookie64': 'bool',
+ '*counter': 'bool',
+ '*pincounter': 'bool',
+ '*txcookie': 'uint64',
+ '*rxcookie': 'uint64',
+ 'txsession': 'uint32',
+ '*rxsession': 'uint32',
+ '*offset': 'uint32' } }
+
##
# @NetdevVdeOptions
#
# A discriminated record of network device traits.
#
# Since 1.2
+#
+# 'l2tpv3' - since 2.1
+#
##
{ 'union': 'NetClientOptions',
'data': {
'nic': 'NetLegacyNicOptions',
'user': 'NetdevUserOptions',
'tap': 'NetdevTapOptions',
+ 'l2tpv3': 'NetdevL2TPv3Options',
'socket': 'NetdevSocketOptions',
'vde': 'NetdevVdeOptions',
'dump': 'NetdevDumpOptions',
# @nodelay: #optional set TCP_NODELAY socket option (default: false)
# @telnet: #optional enable telnet protocol on server
# sockets (default: false)
+# @reconnect: #optional For a client socket, if a socket is disconnected,
+# then attempt a reconnect after the given number of seconds.
+# Setting this to zero disables this function. (default: 0)
+# (Since: 2.2)
#
# Since: 1.4
##
-{ 'type': 'ChardevSocket', 'data': { 'addr' : 'SocketAddress',
- '*server' : 'bool',
- '*wait' : 'bool',
- '*nodelay' : 'bool',
- '*telnet' : 'bool' } }
+{ 'type': 'ChardevSocket', 'data': { 'addr' : 'SocketAddress',
+ '*server' : 'bool',
+ '*wait' : 'bool',
+ '*nodelay' : 'bool',
+ '*telnet' : 'bool',
+ '*reconnect' : 'int' } }
##
# @ChardevUdp:
#
# Configuration info for the new chardev backend.
#
-# Since: 1.4
+# Since: 1.4 (testdev since 2.2)
##
{ 'type': 'ChardevDummy', 'data': { } }
'mux' : 'ChardevMux',
'msmouse': 'ChardevDummy',
'braille': 'ChardevDummy',
+ 'testdev': 'ChardevDummy',
'stdio' : 'ChardevStdio',
'console': 'ChardevDummy',
'spicevmc' : 'ChardevSpiceChannel',
#
# Input event union.
#
+# @key: Input event of Keyboard
+# @btn: Input event of pointer buttons
+# @rel: Input event of relative pointer motion
+# @abs: Input event of absolute pointer motion
+#
# Since: 2.0
##
{ 'union' : 'InputEvent',
'rel' : 'InputMoveEvent',
'abs' : 'InputMoveEvent' } }
+##
+# @x-input-send-event
+#
+# Send input event(s) to guest.
+#
+# @console: #optional console to send event(s) to.
+#
+# @events: List of InputEvent union.
+#
+# Returns: Nothing on success.
+#
+# Since: 2.2
+#
+# Note: this command is experimental, and not a stable API.
+#
+##
+{ 'command': 'x-input-send-event',
+ 'data': { '*console':'int', 'events': [ 'InputEvent' ] } }
+
##
# @NumaOptions
#
{ 'enum': 'GuestPanicAction',
'data': [ 'pause' ] }
-{ 'include': 'qapi-event.json' }
+##
+# @rtc-reset-reinjection
+#
+# This command will reset the RTC interrupt reinjection backlog.
+# Can be used if another mechanism to synchronize guest time
+# is in effect, for example QEMU guest agent's guest-set-time
+# command.
+#
+# Since: 2.1
+##
+{ 'command': 'rtc-reset-reinjection' }
projects / qemu.git / blobdiff