works with less than base ISA qemu-system-riscv32 -M virt -bios none -kernel output...

[qemu.git] / hw / arm / fsl-imx6.c

diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c
index 4ae3c3efc28efd16fad68ccc8c91dfcef3cac4ad..00dafe3f62dee011c9249807ae1894082728c97e 100644 (file)
--- a/hw/arm/fsl-imx6.c
+++ b/hw/arm/fsl-imx6.c
@@ -120,33 +120,28 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
 
         /* On uniprocessor, the CBAR is set to 0 */
         if (smp_cpus > 1) {
-            object_property_set_int(OBJECT(&s->cpu[i]), FSL_IMX6_A9MPCORE_ADDR,
-                                    "reset-cbar", &error_abort);
+            object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar",
+                                    FSL_IMX6_A9MPCORE_ADDR, &error_abort);
         }
 
         /* All CPU but CPU 0 start in power off mode */
         if (i) {
-            object_property_set_bool(OBJECT(&s->cpu[i]), true,
-                                     "start-powered-off", &error_abort);
+            object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off",
+                                     true, &error_abort);
         }
 
-        qdev_realize(DEVICE(&s->cpu[i]), NULL, &err);
-        if (err) {
-            error_propagate(errp, err);
+        if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
             return;
         }
     }
 
-    object_property_set_int(OBJECT(&s->a9mpcore), smp_cpus, "num-cpu",
+    object_property_set_int(OBJECT(&s->a9mpcore), "num-cpu", smp_cpus,
                             &error_abort);
 
-    object_property_set_int(OBJECT(&s->a9mpcore),
-                            FSL_IMX6_MAX_IRQ + GIC_INTERNAL, "num-irq",
-                            &error_abort);
+    object_property_set_int(OBJECT(&s->a9mpcore), "num-irq",
+                            FSL_IMX6_MAX_IRQ + GIC_INTERNAL, &error_abort);
 
-    sysbus_realize(SYS_BUS_DEVICE(&s->a9mpcore), &err);
-    if (err) {
-        error_propagate(errp, err);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->a9mpcore), errp)) {
         return;
     }
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->a9mpcore), 0, FSL_IMX6_A9MPCORE_ADDR);
@@ -158,16 +153,12 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_FIQ));
     }
 
-    sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &err);
-    if (err) {
-        error_propagate(errp, err);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) {
         return;
     }
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6_CCM_ADDR);
 
-    sysbus_realize(SYS_BUS_DEVICE(&s->src), &err);
-    if (err) {
-        error_propagate(errp, err);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->src), errp)) {
         return;
     }
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6_SRC_ADDR);
@@ -187,9 +178,7 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
 
         qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
 
-        sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), &err);
-        if (err) {
-            error_propagate(errp, err);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) {
             return;
         }
 
@@ -201,9 +190,7 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
 
     s->gpt.ccm = IMX_CCM(&s->ccm);
 
-    sysbus_realize(SYS_BUS_DEVICE(&s->gpt), &err);
-    if (err) {
-        error_propagate(errp, err);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt), errp)) {
         return;
     }
 
@@ -224,9 +211,7 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
 
         s->epit[i].ccm = IMX_CCM(&s->ccm);
 
-        sysbus_realize(SYS_BUS_DEVICE(&s->epit[i]), &err);
-        if (err) {
-            error_propagate(errp, err);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->epit[i]), errp)) {
             return;
         }
 
@@ -247,9 +232,7 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
             { FSL_IMX6_I2C3_ADDR, FSL_IMX6_I2C3_IRQ }
         };
 
-        sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), &err);
-        if (err) {
-            error_propagate(errp, err);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) {
             return;
         }
 
@@ -303,13 +286,11 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
             },
         };
 
-        object_property_set_bool(OBJECT(&s->gpio[i]), true, "has-edge-sel",
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true,
                                  &error_abort);
-        object_property_set_bool(OBJECT(&s->gpio[i]), true, "has-upper-pin-irq",
-                                 &error_abort);
-        sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &err);
-        if (err) {
-            error_propagate(errp, err);
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) {
             return;
         }
 
@@ -335,17 +316,13 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
         };
 
         /* UHS-I SDIO3.0 SDR104 1.8V ADMA */
-        object_property_set_uint(OBJECT(&s->esdhc[i]), 3, "sd-spec-version",
-                                 &error_abort);
-        object_property_set_uint(OBJECT(&s->esdhc[i]), IMX6_ESDHC_CAPABILITIES,
-                                 "capareg",
+        object_property_set_uint(OBJECT(&s->esdhc[i]), "sd-spec-version", 3,
                                  &error_abort);
-        object_property_set_uint(OBJECT(&s->esdhc[i]), SDHCI_VENDOR_IMX,
-                                 "vendor",
-                                 &error_abort);
-        sysbus_realize(SYS_BUS_DEVICE(&s->esdhc[i]), &err);
-        if (err) {
-            error_propagate(errp, err);
+        object_property_set_uint(OBJECT(&s->esdhc[i]), "capareg",
+                                 IMX6_ESDHC_CAPABILITIES, &error_abort);
+        object_property_set_uint(OBJECT(&s->esdhc[i]), "vendor",
+                                 SDHCI_VENDOR_IMX, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->esdhc[i]), errp)) {
             return;
         }
         sysbus_mmio_map(SYS_BUS_DEVICE(&s->esdhc[i]), 0, esdhc_table[i].addr);
@@ -390,9 +367,7 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
         };
 
         /* Initialize the SPI */
-        sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &err);
-        if (err) {
-            error_propagate(errp, err);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
             return;
         }
 
@@ -402,10 +377,9 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
                                             spi_table[i].irq));
     }
 
+    object_property_set_uint(OBJECT(&s->eth), "phy-num", s->phy_num, &err);
     qdev_set_nic_properties(DEVICE(&s->eth), &nd_table[0]);
-    sysbus_realize(SYS_BUS_DEVICE(&s->eth), &err);
-    if (err) {
-        error_propagate(errp, err);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->eth), errp)) {
         return;
     }
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth), 0, FSL_IMX6_ENET_ADDR);
@@ -429,8 +403,8 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
             FSL_IMX6_WDOG2_IRQ,
         };
 
-        object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support",
-                                 &error_abort);
+        object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
+                                 true, &error_abort);
         sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), &error_abort);
 
         sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX6_WDOGn_ADDR[i]);
@@ -476,10 +450,16 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
                                 &s->ocram_alias);
 }
 
+static Property fsl_imx6_properties[] = {
+    DEFINE_PROP_UINT32("fec-phy-num", FslIMX6State, phy_num, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void fsl_imx6_class_init(ObjectClass *oc, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(oc);
 
+    device_class_set_props(dc, fsl_imx6_properties);
     dc->realize = fsl_imx6_realize;
     dc->desc = "i.MX6 SOC";
     /* Reason: Uses serial_hd() in the realize() function */