Allow relative paths for the interpreter prefix in linux-user emulation.

[qemu.git] / Makefile

diff --git a/Makefile b/Makefile
index 3a69a0494d2f4781a0b467d5fab276ddbffcf3ab..73d4cf382b5cb8e463d81f0f82a7553ed51d651e 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,15 +1,21 @@
+# Makefile for QEMU.
+
 include config-host.mak
 
-CFLAGS=-Wall -O2 -g -fno-strict-aliasing -I.
-ifdef CONFIG_DARWIN
-CFLAGS+= -mdynamic-no-pic
-endif
-LDFLAGS=-g
+.PHONY: all clean distclean dvi info install install-doc tar tarbin \
+       speed test test2 html dvi info
+
+BASE_CFLAGS=
+BASE_LDFLAGS=
+
+BASE_CFLAGS += $(OS_CFLAGS) $(ARCH_CFLAGS)
+BASE_LDFLAGS += $(OS_LDFLAGS) $(ARCH_LDFLAGS)
+
+CPPFLAGS += -I. -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
 LIBS=
-DEFINES+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
 TOOLS=qemu-img$(EXESUF)
 ifdef CONFIG_STATIC
-LDFLAGS+=-static
+BASE_LDFLAGS += -static
 endif
 ifdef BUILD_DOCS
 DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1
@@ -17,18 +23,20 @@ else
 DOCS=
 endif
 
+LIBS+=$(AIOLIBS)
+
+all: $(TOOLS) $(DOCS) recurse-all
+
 subdir-%: dyngen$(EXESUF)
        $(MAKE) -C $(subst subdir-,,$@) all
 
 recurse-all: $(patsubst %,subdir-%, $(TARGET_DIRS))
-        
-all: $(TOOLS) $(DOCS) recurse-all
 
-qemu-img$(EXESUF): qemu-img.c block.c block-cow.c block-qcow.c aes.c block-vmdk.c block-cloop.c block-dmg.c block-bochs.c block-vpc.c block-vvfat.c
-       $(CC) -DQEMU_TOOL $(CFLAGS) $(LDFLAGS) $(DEFINES) -o $@ $^ -lz $(LIBS)
+qemu-img$(EXESUF): qemu-img.c cutils.c block.c block-raw.c block-cow.c block-qcow.c aes.c block-vmdk.c block-cloop.c block-dmg.c block-bochs.c block-vpc.c block-vvfat.c block-qcow2.c
+       $(CC) -DQEMU_TOOL $(CFLAGS) $(CPPFLAGS) $(BASE_CFLAGS) $(LDFLAGS) $(BASE_LDFLAGS) -o $@ $^ -lz $(LIBS)
 
 dyngen$(EXESUF): dyngen.c
-       $(HOST_CC) $(CFLAGS) $(DEFINES) -o $@ $^
+       $(HOST_CC) $(CFLAGS) $(CPPFLAGS) $(BASE_CFLAGS) -o $@ $^
 
 clean:
 # avoid old build problems by removing potentially incorrect old files
@@ -41,6 +49,7 @@ clean:
 
 distclean: clean
        rm -f config-host.mak config-host.h $(DOCS)
+       rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
        for d in $(TARGET_DIRS); do \
        rm -rf $$d || exit 1 ; \
         done
@@ -62,7 +71,8 @@ install: all $(if $(BUILD_DOCS),install-doc)
        $(INSTALL) -m 755 -s $(TOOLS) "$(DESTDIR)$(bindir)"
        mkdir -p "$(DESTDIR)$(datadir)"
        for x in bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \
-                       video.x proll.elf linux_boot.bin; do \
+               video.x openbios-sparc32 pxe-ne2k_pci.bin \
+               pxe-rtl8139.bin pxe-pcnet.bin; do \
                $(INSTALL) -m 644 $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
        done
 ifndef CONFIG_WIN32
@@ -105,7 +115,14 @@ qemu-img.1: qemu-img.texi
        $(SRC_PATH)/texi2pod.pl $< qemu-img.pod
        pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@
 
-FILE=qemu-$(shell cat VERSION)
+info: qemu-doc.info qemu-tech.info
+
+dvi: qemu-doc.dvi qemu-tech.dvi
+
+html: qemu-doc.html qemu-tech.html
+
+VERSION ?= $(shell cat VERSION)
+FILE = qemu-$(VERSION)
 
 # tar release (use 'make -k tar' on a checkouted tree)
 tar:
@@ -119,26 +136,34 @@ tarbin:
        ( cd / ; tar zcvf ~/qemu-$(VERSION)-i386.tar.gz \
        $(bindir)/qemu \
        $(bindir)/qemu-system-ppc \
+       $(bindir)/qemu-system-ppc64 \
+       $(bindir)/qemu-system-ppcemb \
        $(bindir)/qemu-system-sparc \
        $(bindir)/qemu-system-x86_64 \
        $(bindir)/qemu-system-mips \
        $(bindir)/qemu-system-mipsel \
+       $(bindir)/qemu-system-mips64 \
+       $(bindir)/qemu-system-mips64el \
        $(bindir)/qemu-system-arm \
        $(bindir)/qemu-i386 \
         $(bindir)/qemu-arm \
         $(bindir)/qemu-armeb \
         $(bindir)/qemu-sparc \
         $(bindir)/qemu-ppc \
+        $(bindir)/qemu-ppc64 \
         $(bindir)/qemu-mips \
         $(bindir)/qemu-mipsel \
+        $(bindir)/qemu-alpha \
         $(bindir)/qemu-img \
        $(datadir)/bios.bin \
        $(datadir)/vgabios.bin \
        $(datadir)/vgabios-cirrus.bin \
        $(datadir)/ppc_rom.bin \
        $(datadir)/video.x \
-       $(datadir)/proll.elf \
-       $(datadir)/linux_boot.bin \
+       $(datadir)/openbios-sparc32 \
+        $(datadir)/pxe-ne2k_pci.bin \
+       $(datadir)/pxe-rtl8139.bin \
+        $(datadir)/pxe-pcnet.bin \
        $(docdir)/qemu-doc.html \
        $(docdir)/qemu-tech.html \
        $(mandir)/man1/qemu.1 $(mandir)/man1/qemu-img.1 )