# QObject
qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o
qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
-qobject-obj-y += qerror.o error.o
+qobject-obj-y += qerror.o error.o qemu-error.o
#######################################################################
# oslib-obj-y is code depending on the OS (win32 vs posix)
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
-block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o async.o
+block-obj-y = cutils.o cache-utils.o qemu-option.o module.o async.o
block-obj-y += nbd.o block.o aio.o aes.o qemu-config.o qemu-progress.o qemu-sockets.o
-block-obj-y += $(coroutine-obj-y)
+block-obj-y += $(coroutine-obj-y) $(qobject-obj-y) $(version-obj-y)
block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
block-nested-$(CONFIG_POSIX) += raw-posix.o
+block-nested-$(CONFIG_LIBISCSI) += iscsi.o
block-nested-$(CONFIG_CURL) += curl.o
block-nested-$(CONFIG_RBD) += rbd.o
fsdev-obj-$(CONFIG_VIRTFS) += $(addprefix fsdev/, $(fsdev-nested-y))
######################################################################
-# libqemu_common.a: Target independent part of system emulation. The
-# long term path is to suppress *all* target specific code in case of
-# system emulation, i.e. a single QEMU executable should support all
-# CPUs and machines.
+# Target independent part of system emulation. The long term path is to
+# suppress *all* target specific code in case of system emulation, i.e. a
+# single QEMU executable should support all CPUs and machines.
common-obj-y = $(block-obj-y) blockdev.o
common-obj-y += $(net-obj-y)
common-obj-y += $(qobject-obj-y)
common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
-common-obj-y += readline.o console.o cursor.o qemu-error.o
+common-obj-y += readline.o console.o cursor.o
common-obj-y += $(oslib-obj-y)
common-obj-$(CONFIG_WIN32) += os-win32.o
common-obj-$(CONFIG_POSIX) += os-posix.o
-common-obj-y += tcg-runtime.o host-utils.o
-common-obj-y += irq.o ioport.o input.o
+common-obj-y += tcg-runtime.o host-utils.o main-loop.o
+common-obj-y += irq.o input.o
common-obj-$(CONFIG_PTIMER) += ptimer.o
common-obj-$(CONFIG_MAX7310) += max7310.o
common-obj-$(CONFIG_WM8750) += wm8750.o
common-obj-y += eeprom93xx.o
common-obj-y += scsi-disk.o cdrom.o
common-obj-y += scsi-generic.o scsi-bus.o
+common-obj-y += hid.o
common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
common-obj-y += usb-serial.o usb-net.o usb-bus.o usb-desc.o
common-obj-$(CONFIG_SSI) += ssi.o
slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
-slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o
+slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o arp_table.o
common-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
# xen backend driver support
user-obj-y += envlist.o path.o
user-obj-y += tcg-runtime.o host-utils.o
user-obj-y += cutils.o cache-utils.o
+user-obj-y += $(trace-obj-y)
######################################################################
# libhw
hw-obj-y =
hw-obj-y += vl.o loader.o
hw-obj-$(CONFIG_VIRTIO) += virtio-console.o
+hw-obj-y += usb-libhw.o
hw-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
hw-obj-y += fw_cfg.o
hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
hw-obj-$(CONFIG_SMARTCARD) += usb-ccid.o ccid-card-passthru.o
hw-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
hw-obj-$(CONFIG_USB_REDIR) += usb-redir.o
+hw-obj-$(CONFIG_I8259) += i8259.o
# PPC devices
-hw-obj-$(CONFIG_OPENPIC) += openpic.o
hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o
# Mac shared devices
hw-obj-$(CONFIG_MACIO) += macio.o
# MIPS devices
hw-obj-$(CONFIG_PIIX4) += piix4.o
+hw-obj-$(CONFIG_G364FB) += g364fb.o
# PCI watchdog devices
hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
hw-obj-$(CONFIG_SMC91C111) += smc91c111.o
hw-obj-$(CONFIG_LAN9118) += lan9118.o
hw-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
+hw-obj-$(CONFIG_OPENCORES_ETH) += opencores_eth.o
# IDE
hw-obj-$(CONFIG_IDE_CORE) += ide/core.o ide/atapi.o
hw-obj-$(CONFIG_ESP) += esp.o
hw-obj-y += dma-helpers.o sysbus.o isa-bus.o
-hw-obj-y += qdev-addr.o
+hw-obj-y += qdev-addr.o container.o
# VGA
hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o
adlib.o fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0
hw-obj-$(CONFIG_SOUND) += $(sound-obj-y)
-9pfs-nested-$(CONFIG_VIRTFS) = virtio-9p.o virtio-9p-debug.o
-9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-local.o virtio-9p-xattr.o
-9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-xattr-user.o virtio-9p-posix-acl.o
+9pfs-nested-$(CONFIG_VIRTFS) = virtio-9p.o
+9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-local.o virtio-9p-xattr.o
+9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-xattr-user.o virtio-9p-posix-acl.o
+9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-coth.o cofs.o codir.o cofile.o
+9pfs-nested-$(CONFIG_VIRTFS) += coxattr.o virtio-9p-synth.o
+9pfs-nested-$(CONFIG_OPEN_BY_HANDLE) += virtio-9p-handle.o
hw-obj-$(CONFIG_REALLY_VIRTFS) += $(addprefix 9pfs/, $(9pfs-nested-y))
+$(addprefix 9pfs/, $(9pfs-nested-y)): QEMU_CFLAGS+=$(GLIB_CFLAGS)
######################################################################
else
trace.h: trace.h-timestamp
endif
-trace.h-timestamp: $(SRC_PATH)/trace-events config-host.mak
+trace.h-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -h < $< > $@," GEN trace.h")
@cmp -s $@ trace.h || cp $@ trace.h
trace.c: trace.c-timestamp
-trace.c-timestamp: $(SRC_PATH)/trace-events config-host.mak
+trace.c-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -c < $< > $@," GEN trace.c")
@cmp -s $@ trace.c || cp $@ trace.c
# but that gets picked up by QEMU's Makefile as an external dependency
# rule file. So we use '.dtrace' instead
trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
-trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events config-host.mak
+trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -d < $< > $@," GEN trace-dtrace.dtrace")
@cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
@echo "missing libtool. please install and rerun configure."; exit 1
else
trace-dtrace.lo: trace-dtrace.dtrace
- $(call quiet-command,libtool --mode=compile --tag=CC dtrace -o $@ -G -s $<, " lt GEN trace-dtrace.o")
+ $(call quiet-command,$(LIBTOOL) --mode=compile --tag=CC dtrace -o $@ -G -s $<, " lt GEN trace-dtrace.o")
endif
-simpletrace.o: simpletrace.c $(GENERATED_HEADERS)
+trace/simple.o: trace/simple.c $(GENERATED_HEADERS)
-ifeq ($(TRACE_BACKEND),dtrace)
-trace-obj-y = trace-dtrace.o
-else
+trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace.o
+ifneq ($(TRACE_BACKEND),dtrace)
trace-obj-y = trace.o
-ifeq ($(TRACE_BACKEND),simple)
-trace-obj-y += simpletrace.o
-user-obj-y += qemu-timer-common.o
-endif
endif
+trace-nested-$(CONFIG_TRACE_DEFAULT) += default.o
+
+trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o
+trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
+
+trace-nested-$(CONFIG_TRACE_STDERR) += stderr.o
+
+trace-nested-y += control.o
+
+trace-obj-y += $(addprefix trace/, $(trace-nested-y))
+
+$(trace-obj-y): $(GENERATED_HEADERS)
+
######################################################################
# smartcard
qapi-nested-y += qmp-registry.o qmp-dispatch.o
qapi-obj-y = $(addprefix qapi/, $(qapi-nested-y))
+common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o $(qapi-obj-y)
+common-obj-y += qmp.o hmp.o
+
+######################################################################
+# guest agent
+
+qga-nested-y = guest-agent-commands.o guest-agent-command-state.o
+qga-obj-y = $(addprefix qga/, $(qga-nested-y))
+qga-obj-y += qemu-ga.o qemu-sockets.o module.o qemu-option.o
+qga-obj-$(CONFIG_WIN32) += oslib-win32.o
+qga-obj-$(CONFIG_POSIX) += oslib-posix.o
+
vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
-vl.o: QEMU_CFLAGS+=$(GLIB_CFLAGS)
+QEMU_CFLAGS+=$(GLIB_CFLAGS)
+
projects / qemu.git / blobdiff