/*
- * QEMU PC System Emulator
+ * QEMU System Emulator
*
- * Copyright (c) 2003 Fabrice Bellard
+ * Copyright (c) 2003-2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
-#include <stdlib.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <string.h>
-#include <ctype.h>
+#include "vl.h"
+
#include <getopt.h>
-#include <inttypes.h>
#include <unistd.h>
-#include <sys/mman.h>
#include <fcntl.h>
#include <signal.h>
#include <time.h>
+#include <errno.h>
#include <sys/time.h>
-#include <malloc.h>
+
+#ifndef _WIN32
+#include <sys/times.h>
+#include <sys/wait.h>
#include <termios.h>
#include <sys/poll.h>
-#include <errno.h>
-#include <sys/wait.h>
-
+#include <sys/mman.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
+#ifdef _BSD
+#include <sys/stat.h>
+#include <libutil.h>
+#else
#include <linux/if.h>
#include <linux/if_tun.h>
+#include <pty.h>
+#include <malloc.h>
+#include <linux/rtc.h>
+#endif
+#endif
-#include "cpu.h"
-#include "disas.h"
-#include "thunk.h"
-
-#include "vl.h"
-
-#define DEFAULT_NETWORK_SCRIPT "/etc/qemu-ifup"
-#define BIOS_FILENAME "bios.bin"
-#define VGABIOS_FILENAME "vgabios.bin"
-
-//#define DEBUG_UNUSED_IOPORT
-
-//#define DEBUG_IRQ_LATENCY
+#if defined(CONFIG_SLIRP)
+#include "libslirp.h"
+#endif
-/* output Bochs bios info messages */
-//#define DEBUG_BIOS
+#ifdef _WIN32
+#include <malloc.h>
+#include <sys/timeb.h>
+#include <windows.h>
+#define getopt_long_only getopt_long
+#define memalign(align, size) malloc(size)
+#endif
-//#define DEBUG_CMOS
+#ifdef CONFIG_SDL
+#if defined(__linux__)
+/* SDL use the pthreads and they modify sigaction. We don't
+ want that. */
+#if (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2))
+extern void __libc_sigaction();
+#define sigaction(sig, act, oact) __libc_sigaction(sig, act, oact)
+#else
+extern void __sigaction();
+#define sigaction(sig, act, oact) __sigaction(sig, act, oact)
+#endif
+#endif /* __linux__ */
+#endif /* CONFIG_SDL */
-/* debug PIC */
-//#define DEBUG_PIC
+#include "disas.h"
-/* debug NE2000 card */
-//#define DEBUG_NE2000
+#include "exec-all.h"
-/* debug PC keyboard */
-//#define DEBUG_KBD
+//#define DO_TB_FLUSH
-/* debug PC keyboard : only mouse */
-//#define DEBUG_MOUSE
+#define DEFAULT_NETWORK_SCRIPT "/etc/qemu-ifup"
-//#define DEBUG_SERIAL
+//#define DEBUG_UNUSED_IOPORT
+//#define DEBUG_IOPORT
-#define PHYS_RAM_BASE 0xac000000
+#if !defined(CONFIG_SOFTMMU)
#define PHYS_RAM_MAX_SIZE (256 * 1024 * 1024)
-
-#if defined (TARGET_I386)
-#define KERNEL_LOAD_ADDR 0x00100000
-#elif defined (TARGET_PPC)
-//#define USE_OPEN_FIRMWARE
-#if !defined (USE_OPEN_FIRMWARE)
-#define KERNEL_LOAD_ADDR 0x01000000
-#define KERNEL_STACK_ADDR 0x01200000
#else
-#define KERNEL_LOAD_ADDR 0x00000000
-#define KERNEL_STACK_ADDR 0x00400000
-#endif
+#define PHYS_RAM_MAX_SIZE (2047 * 1024 * 1024)
#endif
-#define INITRD_LOAD_ADDR 0x00400000
-#define KERNEL_PARAMS_ADDR 0x00090000
-
-#define GUI_REFRESH_INTERVAL 30
-
-/* from plex86 (BSD license) */
-struct __attribute__ ((packed)) linux_params {
- // For 0x00..0x3f, see 'struct screen_info' in linux/include/linux/tty.h.
- // I just padded out the VESA parts, rather than define them.
-
- /* 0x000 */ uint8_t orig_x;
- /* 0x001 */ uint8_t orig_y;
- /* 0x002 */ uint16_t ext_mem_k;
- /* 0x004 */ uint16_t orig_video_page;
- /* 0x006 */ uint8_t orig_video_mode;
- /* 0x007 */ uint8_t orig_video_cols;
- /* 0x008 */ uint16_t unused1;
- /* 0x00a */ uint16_t orig_video_ega_bx;
- /* 0x00c */ uint16_t unused2;
- /* 0x00e */ uint8_t orig_video_lines;
- /* 0x00f */ uint8_t orig_video_isVGA;
- /* 0x010 */ uint16_t orig_video_points;
- /* 0x012 */ uint8_t pad0[0x20 - 0x12]; // VESA info.
- /* 0x020 */ uint16_t cl_magic; // Commandline magic number (0xA33F)
- /* 0x022 */ uint16_t cl_offset; // Commandline offset. Address of commandline
- // is calculated as 0x90000 + cl_offset, bu
- // only if cl_magic == 0xA33F.
- /* 0x024 */ uint8_t pad1[0x40 - 0x24]; // VESA info.
-
- /* 0x040 */ uint8_t apm_bios_info[20]; // struct apm_bios_info
- /* 0x054 */ uint8_t pad2[0x80 - 0x54];
-
- // Following 2 from 'struct drive_info_struct' in drivers/block/cciss.h.
- // Might be truncated?
- /* 0x080 */ uint8_t hd0_info[16]; // hd0-disk-parameter from intvector 0x41
- /* 0x090 */ uint8_t hd1_info[16]; // hd1-disk-parameter from intvector 0x46
-
- // System description table truncated to 16 bytes
- // From 'struct sys_desc_table_struct' in linux/arch/i386/kernel/setup.c.
- /* 0x0a0 */ uint16_t sys_description_len;
- /* 0x0a2 */ uint8_t sys_description_table[14];
- // [0] machine id
- // [1] machine submodel id
- // [2] BIOS revision
- // [3] bit1: MCA bus
-
- /* 0x0b0 */ uint8_t pad3[0x1e0 - 0xb0];
- /* 0x1e0 */ uint32_t alt_mem_k;
- /* 0x1e4 */ uint8_t pad4[4];
- /* 0x1e8 */ uint8_t e820map_entries;
- /* 0x1e9 */ uint8_t eddbuf_entries; // EDD_NR
- /* 0x1ea */ uint8_t pad5[0x1f1 - 0x1ea];
- /* 0x1f1 */ uint8_t setup_sects; // size of setup.S, number of sectors
- /* 0x1f2 */ uint16_t mount_root_rdonly; // MOUNT_ROOT_RDONLY (if !=0)
- /* 0x1f4 */ uint16_t sys_size; // size of compressed kernel-part in the
- // (b)zImage-file (in 16 byte units, rounded up)
- /* 0x1f6 */ uint16_t swap_dev; // (unused AFAIK)
- /* 0x1f8 */ uint16_t ramdisk_flags;
- /* 0x1fa */ uint16_t vga_mode; // (old one)
- /* 0x1fc */ uint16_t orig_root_dev; // (high=Major, low=minor)
- /* 0x1fe */ uint8_t pad6[1];
- /* 0x1ff */ uint8_t aux_device_info;
- /* 0x200 */ uint16_t jump_setup; // Jump to start of setup code,
- // aka "reserved" field.
- /* 0x202 */ uint8_t setup_signature[4]; // Signature for SETUP-header, ="HdrS"
- /* 0x206 */ uint16_t header_format_version; // Version number of header format;
- /* 0x208 */ uint8_t setup_S_temp0[8]; // Used by setup.S for communication with
- // boot loaders, look there.
- /* 0x210 */ uint8_t loader_type;
- // 0 for old one.
- // else 0xTV:
- // T=0: LILO
- // T=1: Loadlin
- // T=2: bootsect-loader
- // T=3: SYSLINUX
- // T=4: ETHERBOOT
- // V=version
- /* 0x211 */ uint8_t loadflags;
- // bit0 = 1: kernel is loaded high (bzImage)
- // bit7 = 1: Heap and pointer (see below) set by boot
- // loader.
- /* 0x212 */ uint16_t setup_S_temp1;
- /* 0x214 */ uint32_t kernel_start;
- /* 0x218 */ uint32_t initrd_start;
- /* 0x21c */ uint32_t initrd_size;
- /* 0x220 */ uint8_t setup_S_temp2[4];
- /* 0x224 */ uint16_t setup_S_heap_end_pointer;
- /* 0x226 */ uint8_t pad7[0x2d0 - 0x226];
-
- /* 0x2d0 : Int 15, ax=e820 memory map. */
- // (linux/include/asm-i386/e820.h, 'struct e820entry')
-#define E820MAX 32
-#define E820_RAM 1
-#define E820_RESERVED 2
-#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */
-#define E820_NVS 4
- struct {
- uint64_t addr;
- uint64_t size;
- uint32_t type;
- } e820map[E820MAX];
-
- /* 0x550 */ uint8_t pad8[0x600 - 0x550];
-
- // BIOS Enhanced Disk Drive Services.
- // (From linux/include/asm-i386/edd.h, 'struct edd_info')
- // Each 'struct edd_info is 78 bytes, times a max of 6 structs in array.
- /* 0x600 */ uint8_t eddbuf[0x7d4 - 0x600];
-
- /* 0x7d4 */ uint8_t pad9[0x800 - 0x7d4];
- /* 0x800 */ uint8_t commandline[0x800];
-
- /* 0x1000 */
- uint64_t gdt_table[256];
- uint64_t idt_table[48];
-};
-#define KERNEL_CS 0x10
-#define KERNEL_DS 0x18
+/* in ms */
+#define GUI_REFRESH_INTERVAL 30
/* XXX: use a two level table to limit memory usage */
#define MAX_IOPORTS 65536
-static const char *bios_dir = CONFIG_QEMU_SHAREDIR;
+const char *bios_dir = CONFIG_QEMU_SHAREDIR;
char phys_ram_file[1024];
CPUState *global_env;
CPUState *cpu_single_env;
+void *ioport_opaque[MAX_IOPORTS];
IOPortReadFunc *ioport_read_table[3][MAX_IOPORTS];
IOPortWriteFunc *ioport_write_table[3][MAX_IOPORTS];
BlockDriverState *bs_table[MAX_DISKS], *fd_table[MAX_FD];
int vga_ram_size;
static DisplayState display_state;
int nographic;
-int term_inited;
int64_t ticks_per_sec;
int boot_device = 'c';
+static int ram_size;
+static char network_script[1024];
+int pit_min_timer_count = 0;
+int nb_nics;
+NetDriverState nd_table[MAX_NICS];
+SerialState *serial_console;
+QEMUTimer *gui_timer;
+int vm_running;
+int audio_enabled = 0;
/***********************************************************/
-/* x86 io ports */
+/* x86 ISA bus support */
-uint32_t default_ioport_readb(CPUState *env, uint32_t address)
+target_phys_addr_t isa_mem_base = 0;
+
+uint32_t default_ioport_readb(void *opaque, uint32_t address)
{
#ifdef DEBUG_UNUSED_IOPORT
fprintf(stderr, "inb: port=0x%04x\n", address);
return 0xff;
}
-void default_ioport_writeb(CPUState *env, uint32_t address, uint32_t data)
+void default_ioport_writeb(void *opaque, uint32_t address, uint32_t data)
{
#ifdef DEBUG_UNUSED_IOPORT
fprintf(stderr, "outb: port=0x%04x data=0x%02x\n", address, data);
}
/* default is to make two byte accesses */
-uint32_t default_ioport_readw(CPUState *env, uint32_t address)
+uint32_t default_ioport_readw(void *opaque, uint32_t address)
{
uint32_t data;
- data = ioport_read_table[0][address & (MAX_IOPORTS - 1)](env, address);
- data |= ioport_read_table[0][(address + 1) & (MAX_IOPORTS - 1)](env, address + 1) << 8;
+ data = ioport_read_table[0][address](ioport_opaque[address], address);
+ address = (address + 1) & (MAX_IOPORTS - 1);
+ data |= ioport_read_table[0][address](ioport_opaque[address], address) << 8;
return data;
}
-void default_ioport_writew(CPUState *env, uint32_t address, uint32_t data)
+void default_ioport_writew(void *opaque, uint32_t address, uint32_t data)
{
- ioport_write_table[0][address & (MAX_IOPORTS - 1)](env, address, data & 0xff);
- ioport_write_table[0][(address + 1) & (MAX_IOPORTS - 1)](env, address + 1, (data >> 8) & 0xff);
+ ioport_write_table[0][address](ioport_opaque[address], address, data & 0xff);
+ address = (address + 1) & (MAX_IOPORTS - 1);
+ ioport_write_table[0][address](ioport_opaque[address], address, (data >> 8) & 0xff);
}
-uint32_t default_ioport_readl(CPUState *env, uint32_t address)
+uint32_t default_ioport_readl(void *opaque, uint32_t address)
{
#ifdef DEBUG_UNUSED_IOPORT
fprintf(stderr, "inl: port=0x%04x\n", address);
return 0xffffffff;
}
-void default_ioport_writel(CPUState *env, uint32_t address, uint32_t data)
+void default_ioport_writel(void *opaque, uint32_t address, uint32_t data)
{
#ifdef DEBUG_UNUSED_IOPORT
fprintf(stderr, "outl: port=0x%04x data=0x%02x\n", address, data);
}
/* size is the word size in byte */
-int register_ioport_read(int start, int length, IOPortReadFunc *func, int size)
+int register_ioport_read(int start, int length, int size,
+ IOPortReadFunc *func, void *opaque)
{
int i, bsize;
- if (size == 1)
+ if (size == 1) {
bsize = 0;
- else if (size == 2)
+ } else if (size == 2) {
bsize = 1;
- else if (size == 4)
+ } else if (size == 4) {
bsize = 2;
- else
+ } else {
+ hw_error("register_ioport_read: invalid size");
return -1;
- for(i = start; i < start + length; i += size)
+ }
+ for(i = start; i < start + length; i += size) {
ioport_read_table[bsize][i] = func;
+ if (ioport_opaque[i] != NULL && ioport_opaque[i] != opaque)
+ hw_error("register_ioport_read: invalid opaque");
+ ioport_opaque[i] = opaque;
+ }
return 0;
}
/* size is the word size in byte */
-int register_ioport_write(int start, int length, IOPortWriteFunc *func, int size)
+int register_ioport_write(int start, int length, int size,
+ IOPortWriteFunc *func, void *opaque)
{
int i, bsize;
- if (size == 1)
+ if (size == 1) {
bsize = 0;
- else if (size == 2)
+ } else if (size == 2) {
bsize = 1;
- else if (size == 4)
+ } else if (size == 4) {
bsize = 2;
- else
+ } else {
+ hw_error("register_ioport_write: invalid size");
return -1;
- for(i = start; i < start + length; i += size)
+ }
+ for(i = start; i < start + length; i += size) {
ioport_write_table[bsize][i] = func;
+ if (ioport_opaque[i] != NULL && ioport_opaque[i] != opaque)
+ hw_error("register_ioport_read: invalid opaque");
+ ioport_opaque[i] = opaque;
+ }
return 0;
}
return buf;
}
-int load_kernel(const char *filename, uint8_t *addr)
-{
- int fd, size;
-#if defined (TARGET_I386)
- int setup_sects;
- uint8_t bootsect[512];
-#endif
-
- printf("Load kernel at %p (0x%08x)\n", addr,
- (uint32_t)addr - (uint32_t)phys_ram_base);
- fd = open(filename, O_RDONLY);
- if (fd < 0)
- return -1;
-#if defined (TARGET_I386)
- if (read(fd, bootsect, 512) != 512)
- goto fail;
- setup_sects = bootsect[0x1F1];
- if (!setup_sects)
- setup_sects = 4;
- /* skip 16 bit setup code */
- lseek(fd, (setup_sects + 1) * 512, SEEK_SET);
-#endif
- size = read(fd, addr, 16 * 1024 * 1024);
- if (size < 0)
- goto fail;
- close(fd);
- return size;
- fail:
- close(fd);
- return -1;
-}
-
/* return the size or -1 if error */
int load_image(const char *filename, uint8_t *addr)
{
int fd, size;
- fd = open(filename, O_RDONLY);
+ fd = open(filename, O_RDONLY | O_BINARY);
if (fd < 0)
return -1;
size = lseek(fd, 0, SEEK_END);
void cpu_outb(CPUState *env, int addr, int val)
{
- ioport_write_table[0][addr & (MAX_IOPORTS - 1)](env, addr, val);
+#ifdef DEBUG_IOPORT
+ if (loglevel & CPU_LOG_IOPORT)
+ fprintf(logfile, "outb: %04x %02x\n", addr, val);
+#endif
+ ioport_write_table[0][addr](ioport_opaque[addr], addr, val);
}
void cpu_outw(CPUState *env, int addr, int val)
{
- ioport_write_table[1][addr & (MAX_IOPORTS - 1)](env, addr, val);
+#ifdef DEBUG_IOPORT
+ if (loglevel & CPU_LOG_IOPORT)
+ fprintf(logfile, "outw: %04x %04x\n", addr, val);
+#endif
+ ioport_write_table[1][addr](ioport_opaque[addr], addr, val);
}
void cpu_outl(CPUState *env, int addr, int val)
{
- ioport_write_table[2][addr & (MAX_IOPORTS - 1)](env, addr, val);
+#ifdef DEBUG_IOPORT
+ if (loglevel & CPU_LOG_IOPORT)
+ fprintf(logfile, "outl: %04x %08x\n", addr, val);
+#endif
+ ioport_write_table[2][addr](ioport_opaque[addr], addr, val);
}
int cpu_inb(CPUState *env, int addr)
{
- return ioport_read_table[0][addr & (MAX_IOPORTS - 1)](env, addr);
+ int val;
+ val = ioport_read_table[0][addr](ioport_opaque[addr], addr);
+#ifdef DEBUG_IOPORT
+ if (loglevel & CPU_LOG_IOPORT)
+ fprintf(logfile, "inb : %04x %02x\n", addr, val);
+#endif
+ return val;
}
int cpu_inw(CPUState *env, int addr)
{
- return ioport_read_table[1][addr & (MAX_IOPORTS - 1)](env, addr);
+ int val;
+ val = ioport_read_table[1][addr](ioport_opaque[addr], addr);
+#ifdef DEBUG_IOPORT
+ if (loglevel & CPU_LOG_IOPORT)
+ fprintf(logfile, "inw : %04x %04x\n", addr, val);
+#endif
+ return val;
}
int cpu_inl(CPUState *env, int addr)
{
- return ioport_read_table[2][addr & (MAX_IOPORTS - 1)](env, addr);
+ int val;
+ val = ioport_read_table[2][addr](ioport_opaque[addr], addr);
+#ifdef DEBUG_IOPORT
+ if (loglevel & CPU_LOG_IOPORT)
+ fprintf(logfile, "inl : %04x %08x\n", addr, val);
+#endif
+ return val;
}
/***********************************************************/
-void ioport80_write(CPUState *env, uint32_t addr, uint32_t data)
-{
-}
-
void hw_error(const char *fmt, ...)
{
va_list ap;
}
/***********************************************************/
-/* cmos emulation */
-
-#if defined (TARGET_I386)
-#define RTC_SECONDS 0
-#define RTC_SECONDS_ALARM 1
-#define RTC_MINUTES 2
-#define RTC_MINUTES_ALARM 3
-#define RTC_HOURS 4
-#define RTC_HOURS_ALARM 5
-#define RTC_ALARM_DONT_CARE 0xC0
-
-#define RTC_DAY_OF_WEEK 6
-#define RTC_DAY_OF_MONTH 7
-#define RTC_MONTH 8
-#define RTC_YEAR 9
-
-#define RTC_REG_A 10
-#define RTC_REG_B 11
-#define RTC_REG_C 12
-#define RTC_REG_D 13
-
-/* PC cmos mappings */
-#define REG_EQUIPMENT_BYTE 0x14
-#define REG_IBM_CENTURY_BYTE 0x32
-
-uint8_t cmos_data[128];
-uint8_t cmos_index;
-
-void cmos_ioport_write(CPUState *env, uint32_t addr, uint32_t data)
-{
- if (addr == 0x70) {
- cmos_index = data & 0x7f;
- } else {
-#ifdef DEBUG_CMOS
- printf("cmos: write index=0x%02x val=0x%02x\n",
- cmos_index, data);
-#endif
- switch(addr) {
- case RTC_SECONDS_ALARM:
- case RTC_MINUTES_ALARM:
- case RTC_HOURS_ALARM:
- /* XXX: not supported */
- cmos_data[cmos_index] = data;
- break;
- case RTC_SECONDS:
- case RTC_MINUTES:
- case RTC_HOURS:
- case RTC_DAY_OF_WEEK:
- case RTC_DAY_OF_MONTH:
- case RTC_MONTH:
- case RTC_YEAR:
- cmos_data[cmos_index] = data;
- break;
- case RTC_REG_A:
- case RTC_REG_B:
- cmos_data[cmos_index] = data;
- break;
- case RTC_REG_C:
- case RTC_REG_D:
- /* cannot write to them */
- break;
- default:
- cmos_data[cmos_index] = data;
- break;
- }
- }
-}
+/* timers */
+
+#if defined(__powerpc__)
-static inline int to_bcd(int a)
+static inline uint32_t get_tbl(void)
{
- return ((a / 10) << 4) | (a % 10);
+ uint32_t tbl;
+ asm volatile("mftb %0" : "=r" (tbl));
+ return tbl;
}
-static void cmos_update_time(void)
+static inline uint32_t get_tbu(void)
{
- struct tm *tm;
- time_t ti;
-
- ti = time(NULL);
- tm = gmtime(&ti);
- cmos_data[RTC_SECONDS] = to_bcd(tm->tm_sec);
- cmos_data[RTC_MINUTES] = to_bcd(tm->tm_min);
- cmos_data[RTC_HOURS] = to_bcd(tm->tm_hour);
- cmos_data[RTC_DAY_OF_WEEK] = to_bcd(tm->tm_wday);
- cmos_data[RTC_DAY_OF_MONTH] = to_bcd(tm->tm_mday);
- cmos_data[RTC_MONTH] = to_bcd(tm->tm_mon + 1);
- cmos_data[RTC_YEAR] = to_bcd(tm->tm_year % 100);
- cmos_data[REG_IBM_CENTURY_BYTE] = to_bcd((tm->tm_year / 100) + 19);
+ uint32_t tbl;
+ asm volatile("mftbu %0" : "=r" (tbl));
+ return tbl;
}
-uint32_t cmos_ioport_read(CPUState *env, uint32_t addr)
+int64_t cpu_get_real_ticks(void)
{
- int ret;
-
- if (addr == 0x70) {
- return 0xff;
- } else {
- switch(cmos_index) {
- case RTC_SECONDS:
- case RTC_MINUTES:
- case RTC_HOURS:
- case RTC_DAY_OF_WEEK:
- case RTC_DAY_OF_MONTH:
- case RTC_MONTH:
- case RTC_YEAR:
- case REG_IBM_CENTURY_BYTE:
- cmos_update_time();
- ret = cmos_data[cmos_index];
- break;
- case RTC_REG_A:
- ret = cmos_data[cmos_index];
- /* toggle update-in-progress bit for Linux (same hack as
- plex86) */
- cmos_data[RTC_REG_A] ^= 0x80;
- break;
- case RTC_REG_C:
- ret = cmos_data[cmos_index];
- pic_set_irq(8, 0);
- cmos_data[RTC_REG_C] = 0x00;
- break;
- default:
- ret = cmos_data[cmos_index];
- break;
- }
-#ifdef DEBUG_CMOS
- printf("cmos: read index=0x%02x val=0x%02x\n",
- cmos_index, ret);
-#endif
- return ret;
- }
+ uint32_t l, h, h1;
+ /* NOTE: we test if wrapping has occurred */
+ do {
+ h = get_tbu();
+ l = get_tbl();
+ h1 = get_tbu();
+ } while (h != h1);
+ return ((int64_t)h << 32) | l;
}
-void cmos_init(void)
-{
- int val;
+#elif defined(__i386__)
- cmos_update_time();
+int64_t cpu_get_real_ticks(void)
+{
+ int64_t val;
+ asm volatile ("rdtsc" : "=A" (val));
+ return val;
+}
- cmos_data[RTC_REG_A] = 0x26;
- cmos_data[RTC_REG_B] = 0x02;
- cmos_data[RTC_REG_C] = 0x00;
- cmos_data[RTC_REG_D] = 0x80;
+#elif defined(__x86_64__)
- /* various important CMOS locations needed by PC/Bochs bios */
+int64_t cpu_get_real_ticks(void)
+{
+ uint32_t low,high;
+ int64_t val;
+ asm volatile("rdtsc" : "=a" (low), "=d" (high));
+ val = high;
+ val <<= 32;
+ val |= low;
+ return val;
+}
- cmos_data[REG_EQUIPMENT_BYTE] = 0x02; /* FPU is there */
- cmos_data[REG_EQUIPMENT_BYTE] |= 0x04; /* PS/2 mouse installed */
+#else
+#error unsupported CPU
+#endif
- /* memory size */
- val = (phys_ram_size / 1024) - 1024;
- if (val > 65535)
- val = 65535;
- cmos_data[0x17] = val;
- cmos_data[0x18] = val >> 8;
- cmos_data[0x30] = val;
- cmos_data[0x31] = val >> 8;
+static int64_t cpu_ticks_offset;
+static int cpu_ticks_enabled;
- val = (phys_ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
- if (val > 65535)
- val = 65535;
- cmos_data[0x34] = val;
- cmos_data[0x35] = val >> 8;
-
- switch(boot_device) {
- case 'a':
- case 'b':
- cmos_data[0x3d] = 0x01; /* floppy boot */
- break;
- default:
- case 'c':
- cmos_data[0x3d] = 0x02; /* hard drive boot */
- break;
- case 'd':
- cmos_data[0x3d] = 0x03; /* CD-ROM boot */
- break;
+static inline int64_t cpu_get_ticks(void)
+{
+ if (!cpu_ticks_enabled) {
+ return cpu_ticks_offset;
+ } else {
+ return cpu_get_real_ticks() + cpu_ticks_offset;
}
-
- register_ioport_write(0x70, 2, cmos_ioport_write, 1);
- register_ioport_read(0x70, 2, cmos_ioport_read, 1);
}
-void cmos_register_fd (uint8_t fd0, uint8_t fd1)
+/* enable cpu_get_ticks() */
+void cpu_enable_ticks(void)
{
- int nb = 0;
-
- cmos_data[0x10] = 0;
- switch (fd0) {
- case 0:
- /* 1.44 Mb 3"5 drive */
- cmos_data[0x10] |= 0x40;
- break;
- case 1:
- /* 2.88 Mb 3"5 drive */
- cmos_data[0x10] |= 0x60;
- break;
- case 2:
- /* 1.2 Mb 5"5 drive */
- cmos_data[0x10] |= 0x20;
- break;
- }
- switch (fd1) {
- case 0:
- /* 1.44 Mb 3"5 drive */
- cmos_data[0x10] |= 0x04;
- break;
- case 1:
- /* 2.88 Mb 3"5 drive */
- cmos_data[0x10] |= 0x06;
- break;
- case 2:
- /* 1.2 Mb 5"5 drive */
- cmos_data[0x10] |= 0x02;
- break;
- }
- if (fd0 < 3)
- nb++;
- if (fd1 < 3)
- nb++;
- switch (nb) {
- case 0:
- break;
- case 1:
- cmos_data[REG_EQUIPMENT_BYTE] |= 0x01; /* 1 drive, ready for boot */
- break;
- case 2:
- cmos_data[REG_EQUIPMENT_BYTE] |= 0x41; /* 2 drives, ready for boot */
- break;
+ if (!cpu_ticks_enabled) {
+ cpu_ticks_offset -= cpu_get_real_ticks();
+ cpu_ticks_enabled = 1;
}
}
-#endif /* TARGET_I386 */
-/***********************************************************/
-/* 8259 pic emulation */
-
-typedef struct PicState {
- uint8_t last_irr; /* edge detection */
- uint8_t irr; /* interrupt request register */
- uint8_t imr; /* interrupt mask register */
- uint8_t isr; /* interrupt service register */
- uint8_t priority_add; /* highest irq priority */
- uint8_t irq_base;
- uint8_t read_reg_select;
- uint8_t poll;
- uint8_t special_mask;
- uint8_t init_state;
- uint8_t auto_eoi;
- uint8_t rotate_on_auto_eoi;
- uint8_t special_fully_nested_mode;
- uint8_t init4; /* true if 4 byte init */
-} PicState;
-
-/* 0 is master pic, 1 is slave pic */
-PicState pics[2];
-int pic_irq_requested;
-
-/* set irq level. If an edge is detected, then the IRR is set to 1 */
-static inline void pic_set_irq1(PicState *s, int irq, int level)
-{
- int mask;
- mask = 1 << irq;
- if (level) {
- if ((s->last_irr & mask) == 0)
- s->irr |= mask;
- s->last_irr |= mask;
- } else {
- s->last_irr &= ~mask;
+/* disable cpu_get_ticks() : the clock is stopped. You must not call
+ cpu_get_ticks() after that. */
+void cpu_disable_ticks(void)
+{
+ if (cpu_ticks_enabled) {
+ cpu_ticks_offset = cpu_get_ticks();
+ cpu_ticks_enabled = 0;
}
}
-/* return the highest priority found in mask (highest = smallest
- number). Return 8 if no irq */
-static inline int get_priority(PicState *s, int mask)
+static int64_t get_clock(void)
{
- int priority;
- if (mask == 0)
- return 8;
- priority = 0;
- while ((mask & (1 << ((priority + s->priority_add) & 7))) == 0)
- priority++;
- return priority;
+#ifdef _WIN32
+ struct _timeb tb;
+ _ftime(&tb);
+ return ((int64_t)tb.time * 1000 + (int64_t)tb.millitm) * 1000;
+#else
+ struct timeval tv;
+ gettimeofday(&tv, NULL);
+ return tv.tv_sec * 1000000LL + tv.tv_usec;
+#endif
}
-/* return the pic wanted interrupt. return -1 if none */
-static int pic_get_irq(PicState *s)
+void cpu_calibrate_ticks(void)
{
- int mask, cur_priority, priority;
+ int64_t usec, ticks;
- mask = s->irr & ~s->imr;
- priority = get_priority(s, mask);
- if (priority == 8)
- return -1;
- /* compute current priority. If special fully nested mode on the
- master, the IRQ coming from the slave is not taken into account
- for the priority computation. */
- mask = s->isr;
- if (s->special_fully_nested_mode && s == &pics[0])
- mask &= ~(1 << 2);
- cur_priority = get_priority(s, mask);
- if (priority < cur_priority) {
- /* higher priority found: an irq should be generated */
- return (priority + s->priority_add) & 7;
- } else {
- return -1;
- }
+ usec = get_clock();
+ ticks = cpu_get_real_ticks();
+#ifdef _WIN32
+ Sleep(50);
+#else
+ usleep(50 * 1000);
+#endif
+ usec = get_clock() - usec;
+ ticks = cpu_get_real_ticks() - ticks;
+ ticks_per_sec = (ticks * 1000000LL + (usec >> 1)) / usec;
}
-/* raise irq to CPU if necessary. must be called every time the active
- irq may change */
-void pic_update_irq(void)
+/* compute with 96 bit intermediate result: (a*b)/c */
+uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c)
{
- int irq2, irq;
+ union {
+ uint64_t ll;
+ struct {
+#ifdef WORDS_BIGENDIAN
+ uint32_t high, low;
+#else
+ uint32_t low, high;
+#endif
+ } l;
+ } u, res;
+ uint64_t rl, rh;
- /* first look at slave pic */
- irq2 = pic_get_irq(&pics[1]);
- if (irq2 >= 0) {
- /* if irq request by slave pic, signal master PIC */
- pic_set_irq1(&pics[0], 2, 1);
- pic_set_irq1(&pics[0], 2, 0);
- }
- /* look at requested irq */
- irq = pic_get_irq(&pics[0]);
- if (irq >= 0) {
- if (irq == 2) {
- /* from slave pic */
- pic_irq_requested = 8 + irq2;
- } else {
- /* from master pic */
- pic_irq_requested = irq;
- }
-#if defined(DEBUG_PIC)
- {
- int i;
- for(i = 0; i < 2; i++) {
- printf("pic%d: imr=%x irr=%x padd=%d\n",
- i, pics[i].imr, pics[i].irr, pics[i].priority_add);
-
- }
- }
- printf("pic: cpu_interrupt req=%d\n", pic_irq_requested);
-#endif
- cpu_interrupt(global_env, CPU_INTERRUPT_HARD);
- }
+ u.ll = a;
+ rl = (uint64_t)u.l.low * (uint64_t)b;
+ rh = (uint64_t)u.l.high * (uint64_t)b;
+ rh += (rl >> 32);
+ res.l.high = rh / c;
+ res.l.low = (((rh % c) << 32) + (rl & 0xffffffff)) / c;
+ return res.ll;
}
-#ifdef DEBUG_IRQ_LATENCY
-int64_t irq_time[16];
-int64_t cpu_get_ticks(void);
-#endif
-#if defined(DEBUG_PIC)
-int irq_level[16];
+#define QEMU_TIMER_REALTIME 0
+#define QEMU_TIMER_VIRTUAL 1
+
+struct QEMUClock {
+ int type;
+ /* XXX: add frequency */
+};
+
+struct QEMUTimer {
+ QEMUClock *clock;
+ int64_t expire_time;
+ QEMUTimerCB *cb;
+ void *opaque;
+ struct QEMUTimer *next;
+};
+
+QEMUClock *rt_clock;
+QEMUClock *vm_clock;
+
+static QEMUTimer *active_timers[2];
+#ifdef _WIN32
+static MMRESULT timerID;
+#else
+/* frequency of the times() clock tick */
+static int timer_freq;
#endif
-void pic_set_irq(int irq, int level)
+QEMUClock *qemu_new_clock(int type)
{
-#if defined(DEBUG_PIC)
- if (level != irq_level[irq]) {
- printf("pic_set_irq: irq=%d level=%d\n", irq, level);
- irq_level[irq] = level;
- }
-#endif
-#ifdef DEBUG_IRQ_LATENCY
- if (level) {
- irq_time[irq] = cpu_get_ticks();
- }
-#endif
- pic_set_irq1(&pics[irq >> 3], irq & 7, level);
- pic_update_irq();
+ QEMUClock *clock;
+ clock = qemu_mallocz(sizeof(QEMUClock));
+ if (!clock)
+ return NULL;
+ clock->type = type;
+ return clock;
}
-/* acknowledge interrupt 'irq' */
-static inline void pic_intack(PicState *s, int irq)
+QEMUTimer *qemu_new_timer(QEMUClock *clock, QEMUTimerCB *cb, void *opaque)
{
- if (s->auto_eoi) {
- if (s->rotate_on_auto_eoi)
- s->priority_add = (irq + 1) & 7;
- } else {
- s->isr |= (1 << irq);
+ QEMUTimer *ts;
+
+ ts = qemu_mallocz(sizeof(QEMUTimer));
+ ts->clock = clock;
+ ts->cb = cb;
+ ts->opaque = opaque;
+ return ts;
+}
+
+void qemu_free_timer(QEMUTimer *ts)
+{
+ qemu_free(ts);
+}
+
+/* stop a timer, but do not dealloc it */
+void qemu_del_timer(QEMUTimer *ts)
+{
+ QEMUTimer **pt, *t;
+
+ /* NOTE: this code must be signal safe because
+ qemu_timer_expired() can be called from a signal. */
+ pt = &active_timers[ts->clock->type];
+ for(;;) {
+ t = *pt;
+ if (!t)
+ break;
+ if (t == ts) {
+ *pt = t->next;
+ break;
+ }
+ pt = &t->next;
}
- s->irr &= ~(1 << irq);
}
-int cpu_x86_get_pic_interrupt(CPUState *env)
+/* modify the current timer so that it will be fired when current_time
+ >= expire_time. The corresponding callback will be called. */
+void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time)
{
- int irq, irq2, intno;
+ QEMUTimer **pt, *t;
- /* signal the pic that the irq was acked by the CPU */
- irq = pic_irq_requested;
-#ifdef DEBUG_IRQ_LATENCY
- printf("IRQ%d latency=%0.3fus\n",
- irq,
- (double)(cpu_get_ticks() - irq_time[irq]) * 1000000.0 / ticks_per_sec);
-#endif
-#if defined(DEBUG_PIC)
- printf("pic_interrupt: irq=%d\n", irq);
-#endif
+ qemu_del_timer(ts);
- if (irq >= 8) {
- irq2 = irq & 7;
- pic_intack(&pics[1], irq2);
- irq = 2;
- intno = pics[1].irq_base + irq2;
- } else {
- intno = pics[0].irq_base + irq;
+ /* add the timer in the sorted list */
+ /* NOTE: this code must be signal safe because
+ qemu_timer_expired() can be called from a signal. */
+ pt = &active_timers[ts->clock->type];
+ for(;;) {
+ t = *pt;
+ if (!t)
+ break;
+ if (t->expire_time > expire_time)
+ break;
+ pt = &t->next;
}
- pic_intack(&pics[0], irq);
- return intno;
+ ts->expire_time = expire_time;
+ ts->next = *pt;
+ *pt = ts;
}
-void pic_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
+int qemu_timer_pending(QEMUTimer *ts)
{
- PicState *s;
- int priority, cmd, irq;
+ QEMUTimer *t;
+ for(t = active_timers[ts->clock->type]; t != NULL; t = t->next) {
+ if (t == ts)
+ return 1;
+ }
+ return 0;
+}
-#ifdef DEBUG_PIC
- printf("pic_write: addr=0x%02x val=0x%02x\n", addr, val);
-#endif
- s = &pics[addr >> 7];
- addr &= 1;
- if (addr == 0) {
- if (val & 0x10) {
- /* init */
- memset(s, 0, sizeof(PicState));
- s->init_state = 1;
- s->init4 = val & 1;
- if (val & 0x02)
- hw_error("single mode not supported");
- if (val & 0x08)
- hw_error("level sensitive irq not supported");
- } else if (val & 0x08) {
- if (val & 0x04)
- s->poll = 1;
- if (val & 0x02)
- s->read_reg_select = val & 1;
- if (val & 0x40)
- s->special_mask = (val >> 5) & 1;
- } else {
- cmd = val >> 5;
- switch(cmd) {
- case 0:
- case 4:
- s->rotate_on_auto_eoi = cmd >> 2;
- break;
- case 1: /* end of interrupt */
- case 5:
- priority = get_priority(s, s->isr);
- if (priority != 8) {
- irq = (priority + s->priority_add) & 7;
- s->isr &= ~(1 << irq);
- if (cmd == 5)
- s->priority_add = (irq + 1) & 7;
- pic_update_irq();
- }
- break;
- case 3:
- irq = val & 7;
- s->isr &= ~(1 << irq);
- pic_update_irq();
- break;
- case 6:
- s->priority_add = (val + 1) & 7;
- pic_update_irq();
- break;
- case 7:
- irq = val & 7;
- s->isr &= ~(1 << irq);
- s->priority_add = (irq + 1) & 7;
- pic_update_irq();
- break;
- default:
- /* no operation */
- break;
- }
- }
- } else {
- switch(s->init_state) {
- case 0:
- /* normal mode */
- s->imr = val;
- pic_update_irq();
- break;
- case 1:
- s->irq_base = val & 0xf8;
- s->init_state = 2;
+static inline int qemu_timer_expired(QEMUTimer *timer_head, int64_t current_time)
+{
+ if (!timer_head)
+ return 0;
+ return (timer_head->expire_time <= current_time);
+}
+
+static void qemu_run_timers(QEMUTimer **ptimer_head, int64_t current_time)
+{
+ QEMUTimer *ts;
+
+ for(;;) {
+ ts = *ptimer_head;
+ if (ts->expire_time > current_time)
break;
- case 2:
- if (s->init4) {
- s->init_state = 3;
+ /* remove timer from the list before calling the callback */
+ *ptimer_head = ts->next;
+ ts->next = NULL;
+
+ /* run the callback (the timer list can be modified) */
+ ts->cb(ts->opaque);
+ }
+}
+
+int64_t qemu_get_clock(QEMUClock *clock)
+{
+ switch(clock->type) {
+ case QEMU_TIMER_REALTIME:
+#ifdef _WIN32
+ return GetTickCount();
+#else
+ {
+ struct tms tp;
+
+ /* Note that using gettimeofday() is not a good solution
+ for timers because its value change when the date is
+ modified. */
+ if (timer_freq == 100) {
+ return times(&tp) * 10;
} else {
- s->init_state = 0;
+ return ((int64_t)times(&tp) * 1000) / timer_freq;
}
- break;
- case 3:
- s->special_fully_nested_mode = (val >> 4) & 1;
- s->auto_eoi = (val >> 1) & 1;
- s->init_state = 0;
- break;
}
+#endif
+ default:
+ case QEMU_TIMER_VIRTUAL:
+ return cpu_get_ticks();
}
}
-static uint32_t pic_poll_read (PicState *s, uint32_t addr1)
+/* save a timer */
+void qemu_put_timer(QEMUFile *f, QEMUTimer *ts)
{
- int ret;
+ uint64_t expire_time;
- ret = pic_get_irq(s);
- if (ret >= 0) {
- if (addr1 >> 7) {
- pics[0].isr &= ~(1 << 2);
- pics[0].irr &= ~(1 << 2);
- }
- s->irr &= ~(1 << ret);
- s->isr &= ~(1 << ret);
- if (addr1 >> 7 || ret != 2)
- pic_update_irq();
+ if (qemu_timer_pending(ts)) {
+ expire_time = ts->expire_time;
} else {
- ret = 0x07;
- pic_update_irq();
+ expire_time = -1;
}
-
- return ret;
+ qemu_put_be64(f, expire_time);
}
-uint32_t pic_ioport_read(CPUState *env, uint32_t addr1)
+void qemu_get_timer(QEMUFile *f, QEMUTimer *ts)
{
- PicState *s;
- unsigned int addr;
- int ret;
+ uint64_t expire_time;
- addr = addr1;
- s = &pics[addr >> 7];
- addr &= 1;
- if (s->poll) {
- ret = pic_poll_read(s, addr1);
- s->poll = 0;
+ expire_time = qemu_get_be64(f);
+ if (expire_time != -1) {
+ qemu_mod_timer(ts, expire_time);
} else {
- if (addr == 0) {
- if (s->read_reg_select)
- ret = s->isr;
- else
- ret = s->irr;
- } else {
- ret = s->imr;
- }
+ qemu_del_timer(ts);
}
-#ifdef DEBUG_PIC
- printf("pic_read: addr=0x%02x val=0x%02x\n", addr1, ret);
-#endif
- return ret;
}
-/* memory mapped interrupt status */
-uint32_t pic_intack_read(CPUState *env)
+static void timer_save(QEMUFile *f, void *opaque)
{
- int ret;
-
- ret = pic_poll_read(&pics[0], 0x00);
- if (ret == 2)
- ret = pic_poll_read(&pics[1], 0x80) + 8;
- /* Prepare for ISR read */
- pics[0].read_reg_select = 1;
-
- return ret;
+ if (cpu_ticks_enabled) {
+ hw_error("cannot save state if virtual timers are running");
+ }
+ qemu_put_be64s(f, &cpu_ticks_offset);
+ qemu_put_be64s(f, &ticks_per_sec);
}
-void pic_init(void)
+static int timer_load(QEMUFile *f, void *opaque, int version_id)
{
-#if defined (TARGET_I386) || defined (TARGET_PPC)
- register_ioport_write(0x20, 2, pic_ioport_write, 1);
- register_ioport_read(0x20, 2, pic_ioport_read, 1);
- register_ioport_write(0xa0, 2, pic_ioport_write, 1);
- register_ioport_read(0xa0, 2, pic_ioport_read, 1);
-#endif
+ if (version_id != 1)
+ return -EINVAL;
+ if (cpu_ticks_enabled) {
+ return -EINVAL;
+ }
+ qemu_get_be64s(f, &cpu_ticks_offset);
+ qemu_get_be64s(f, &ticks_per_sec);
+ return 0;
}
-/***********************************************************/
-/* 8253 PIT emulation */
-
-#define PIT_FREQ 1193182
-
-#define RW_STATE_LSB 0
-#define RW_STATE_MSB 1
-#define RW_STATE_WORD0 2
-#define RW_STATE_WORD1 3
-#define RW_STATE_LATCHED_WORD0 4
-#define RW_STATE_LATCHED_WORD1 5
-
-typedef struct PITChannelState {
- int count; /* can be 65536 */
- uint16_t latched_count;
- uint8_t rw_state;
- uint8_t mode;
- uint8_t bcd; /* not supported */
- uint8_t gate; /* timer start */
- int64_t count_load_time;
- int64_t count_last_edge_check_time;
-} PITChannelState;
-
-PITChannelState pit_channels[3];
-int speaker_data_on;
-int dummy_refresh_clock;
-int pit_min_timer_count = 0;
+#ifdef _WIN32
+void CALLBACK host_alarm_handler(UINT uTimerID, UINT uMsg,
+ DWORD_PTR dwUser, DWORD_PTR dw1, DWORD_PTR dw2)
+#else
+static void host_alarm_handler(int host_signum)
+#endif
+{
+ if (qemu_timer_expired(active_timers[QEMU_TIMER_VIRTUAL],
+ qemu_get_clock(vm_clock)) ||
+ qemu_timer_expired(active_timers[QEMU_TIMER_REALTIME],
+ qemu_get_clock(rt_clock))) {
+ /* stop the cpu because a timer occured */
+ cpu_interrupt(global_env, CPU_INTERRUPT_EXIT);
+ }
+}
+#ifndef _WIN32
-#if defined(__powerpc__)
+#define RTC_FREQ 1024
-static inline uint32_t get_tbl(void)
+static int rtc_fd;
+
+static int start_rtc_timer(void)
{
- uint32_t tbl;
- asm volatile("mftb %0" : "=r" (tbl));
- return tbl;
+ rtc_fd = open("/dev/rtc", O_RDONLY);
+ if (rtc_fd < 0)
+ return -1;
+ if (ioctl(rtc_fd, RTC_IRQP_SET, RTC_FREQ) < 0) {
+ fprintf(stderr, "Could not configure '/dev/rtc' to have a 1024 Hz timer. This is not a fatal\n"
+ "error, but for better emulation accuracy either use a 2.6 host Linux kernel or\n"
+ "type 'echo 1024 > /proc/sys/dev/rtc/max-user-freq' as root.\n");
+ goto fail;
+ }
+ if (ioctl(rtc_fd, RTC_PIE_ON, 0) < 0) {
+ fail:
+ close(rtc_fd);
+ return -1;
+ }
+ pit_min_timer_count = PIT_FREQ / RTC_FREQ;
+ return 0;
}
-static inline uint32_t get_tbu(void)
+#endif
+
+static void init_timers(void)
{
- uint32_t tbl;
- asm volatile("mftbu %0" : "=r" (tbl));
- return tbl;
+ rt_clock = qemu_new_clock(QEMU_TIMER_REALTIME);
+ vm_clock = qemu_new_clock(QEMU_TIMER_VIRTUAL);
+
+#ifdef _WIN32
+ {
+ int count=0;
+ timerID = timeSetEvent(10, // interval (ms)
+ 0, // resolution
+ host_alarm_handler, // function
+ (DWORD)&count, // user parameter
+ TIME_PERIODIC | TIME_CALLBACK_FUNCTION);
+ if( !timerID ) {
+ perror("failed timer alarm");
+ exit(1);
+ }
+ }
+ pit_min_timer_count = ((uint64_t)10000 * PIT_FREQ) / 1000000;
+#else
+ {
+ struct sigaction act;
+ struct itimerval itv;
+
+ /* get times() syscall frequency */
+ timer_freq = sysconf(_SC_CLK_TCK);
+
+ /* timer signal */
+ sigfillset(&act.sa_mask);
+ act.sa_flags = 0;
+#if defined (TARGET_I386) && defined(USE_CODE_COPY)
+ act.sa_flags |= SA_ONSTACK;
+#endif
+ act.sa_handler = host_alarm_handler;
+ sigaction(SIGALRM, &act, NULL);
+
+ itv.it_interval.tv_sec = 0;
+ itv.it_interval.tv_usec = 1000;
+ itv.it_value.tv_sec = 0;
+ itv.it_value.tv_usec = 10 * 1000;
+ setitimer(ITIMER_REAL, &itv, NULL);
+ /* we probe the tick duration of the kernel to inform the user if
+ the emulated kernel requested a too high timer frequency */
+ getitimer(ITIMER_REAL, &itv);
+
+ if (itv.it_interval.tv_usec > 1000) {
+ /* try to use /dev/rtc to have a faster timer */
+ if (start_rtc_timer() < 0)
+ goto use_itimer;
+ /* disable itimer */
+ itv.it_interval.tv_sec = 0;
+ itv.it_interval.tv_usec = 0;
+ itv.it_value.tv_sec = 0;
+ itv.it_value.tv_usec = 0;
+ setitimer(ITIMER_REAL, &itv, NULL);
+
+ /* use the RTC */
+ sigaction(SIGIO, &act, NULL);
+ fcntl(rtc_fd, F_SETFL, O_ASYNC);
+ fcntl(rtc_fd, F_SETOWN, getpid());
+ } else {
+ use_itimer:
+ pit_min_timer_count = ((uint64_t)itv.it_interval.tv_usec *
+ PIT_FREQ) / 1000000;
+ }
+ }
+#endif
}
-int64_t cpu_get_real_ticks(void)
+void quit_timers(void)
{
- uint32_t l, h, h1;
- /* NOTE: we test if wrapping has occurred */
- do {
- h = get_tbu();
- l = get_tbl();
- h1 = get_tbu();
- } while (h != h1);
- return ((int64_t)h << 32) | l;
+#ifdef _WIN32
+ timeKillEvent(timerID);
+#endif
}
-#elif defined(__i386__)
+/***********************************************************/
+/* serial device */
-int64_t cpu_get_real_ticks(void)
+#ifdef _WIN32
+
+int serial_open_device(void)
{
- int64_t val;
- asm("rdtsc" : "=A" (val));
- return val;
+ return -1;
}
#else
-#error unsupported CPU
+
+int serial_open_device(void)
+{
+ char slave_name[1024];
+ int master_fd, slave_fd;
+
+ if (serial_console == NULL && nographic) {
+ /* use console for serial port */
+ return 0;
+ } else {
+ if (openpty(&master_fd, &slave_fd, slave_name, NULL, NULL) < 0) {
+ fprintf(stderr, "warning: could not create pseudo terminal for serial port\n");
+ return -1;
+ }
+ fprintf(stderr, "Serial port redirected to %s\n", slave_name);
+ return master_fd;
+ }
+}
+
#endif
-static int64_t cpu_ticks_offset;
-static int64_t cpu_ticks_last;
+/***********************************************************/
+/* Linux network device redirectors */
-int64_t cpu_get_ticks(void)
+void hex_dump(FILE *f, const uint8_t *buf, int size)
{
- return cpu_get_real_ticks() + cpu_ticks_offset;
+ int len, i, j, c;
+
+ for(i=0;i<size;i+=16) {
+ len = size - i;
+ if (len > 16)
+ len = 16;
+ fprintf(f, "%08x ", i);
+ for(j=0;j<16;j++) {
+ if (j < len)
+ fprintf(f, " %02x", buf[i+j]);
+ else
+ fprintf(f, " ");
+ }
+ fprintf(f, " ");
+ for(j=0;j<len;j++) {
+ c = buf[i+j];
+ if (c < ' ' || c > '~')
+ c = '.';
+ fprintf(f, "%c", c);
+ }
+ fprintf(f, "\n");
+ }
}
-/* enable cpu_get_ticks() */
-void cpu_enable_ticks(void)
+void qemu_send_packet(NetDriverState *nd, const uint8_t *buf, int size)
{
- cpu_ticks_offset = cpu_ticks_last - cpu_get_real_ticks();
+ nd->send_packet(nd, buf, size);
}
-/* disable cpu_get_ticks() : the clock is stopped. You must not call
- cpu_get_ticks() after that. */
-void cpu_disable_ticks(void)
+void qemu_add_read_packet(NetDriverState *nd, IOCanRWHandler *fd_can_read,
+ IOReadHandler *fd_read, void *opaque)
{
- cpu_ticks_last = cpu_get_ticks();
+ nd->add_read_packet(nd, fd_can_read, fd_read, opaque);
}
-int64_t get_clock(void)
+/* dummy network adapter */
+
+static void dummy_send_packet(NetDriverState *nd, const uint8_t *buf, int size)
{
- struct timeval tv;
- gettimeofday(&tv, NULL);
- return tv.tv_sec * 1000000LL + tv.tv_usec;
}
-void cpu_calibrate_ticks(void)
+static void dummy_add_read_packet(NetDriverState *nd,
+ IOCanRWHandler *fd_can_read,
+ IOReadHandler *fd_read, void *opaque)
{
- int64_t usec, ticks;
-
- usec = get_clock();
- ticks = cpu_get_ticks();
- usleep(50 * 1000);
- usec = get_clock() - usec;
- ticks = cpu_get_ticks() - ticks;
- ticks_per_sec = (ticks * 1000000LL + (usec >> 1)) / usec;
}
-/* compute with 96 bit intermediate result: (a*b)/c */
-static uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c)
+static int net_dummy_init(NetDriverState *nd)
{
- union {
- uint64_t ll;
- struct {
-#ifdef WORDS_BIGENDIAN
- uint32_t high, low;
-#else
- uint32_t low, high;
-#endif
- } l;
- } u, res;
- uint64_t rl, rh;
-
- u.ll = a;
- rl = (uint64_t)u.l.low * (uint64_t)b;
- rh = (uint64_t)u.l.high * (uint64_t)b;
- rh += (rl >> 32);
- res.l.high = rh / c;
- res.l.low = (((rh % c) << 32) + (rl & 0xffffffff)) / c;
- return res.ll;
+ nd->send_packet = dummy_send_packet;
+ nd->add_read_packet = dummy_add_read_packet;
+ pstrcpy(nd->ifname, sizeof(nd->ifname), "dummy");
+ return 0;
}
-static int pit_get_count(PITChannelState *s)
-{
- uint64_t d;
- int counter;
+#if defined(CONFIG_SLIRP)
- d = muldiv64(cpu_get_ticks() - s->count_load_time, PIT_FREQ, ticks_per_sec);
- switch(s->mode) {
- case 0:
- case 1:
- case 4:
- case 5:
- counter = (s->count - d) & 0xffff;
- break;
- case 3:
- /* XXX: may be incorrect for odd counts */
- counter = s->count - ((2 * d) % s->count);
- break;
- default:
- counter = s->count - (d % s->count);
- break;
- }
- return counter;
-}
+/* slirp network adapter */
-/* get pit output bit */
-static int pit_get_out(PITChannelState *s)
-{
- uint64_t d;
- int out;
+static void *slirp_fd_opaque;
+static IOCanRWHandler *slirp_fd_can_read;
+static IOReadHandler *slirp_fd_read;
+static int slirp_inited;
- d = muldiv64(cpu_get_ticks() - s->count_load_time, PIT_FREQ, ticks_per_sec);
- switch(s->mode) {
- default:
- case 0:
- out = (d >= s->count);
- break;
- case 1:
- out = (d < s->count);
- break;
- case 2:
- if ((d % s->count) == 0 && d != 0)
- out = 1;
- else
- out = 0;
- break;
- case 3:
- out = (d % s->count) < ((s->count + 1) >> 1);
- break;
- case 4:
- case 5:
- out = (d == s->count);
- break;
- }
- return out;
+int slirp_can_output(void)
+{
+ return slirp_fd_can_read(slirp_fd_opaque);
}
-/* get the number of 0 to 1 transitions we had since we call this
- function */
-/* XXX: maybe better to use ticks precision to avoid getting edges
- twice if checks are done at very small intervals */
-static int pit_get_out_edges(PITChannelState *s)
+void slirp_output(const uint8_t *pkt, int pkt_len)
{
- uint64_t d1, d2;
- int64_t ticks;
- int ret, v;
+#if 0
+ printf("output:\n");
+ hex_dump(stdout, pkt, pkt_len);
+#endif
+ slirp_fd_read(slirp_fd_opaque, pkt, pkt_len);
+}
- ticks = cpu_get_ticks();
- d1 = muldiv64(s->count_last_edge_check_time - s->count_load_time,
- PIT_FREQ, ticks_per_sec);
- d2 = muldiv64(ticks - s->count_load_time,
- PIT_FREQ, ticks_per_sec);
- s->count_last_edge_check_time = ticks;
- switch(s->mode) {
- default:
- case 0:
- if (d1 < s->count && d2 >= s->count)
- ret = 1;
- else
- ret = 0;
- break;
- case 1:
- ret = 0;
- break;
- case 2:
- d1 /= s->count;
- d2 /= s->count;
- ret = d2 - d1;
- break;
- case 3:
- v = s->count - ((s->count + 1) >> 1);
- d1 = (d1 + v) / s->count;
- d2 = (d2 + v) / s->count;
- ret = d2 - d1;
- break;
- case 4:
- case 5:
- if (d1 < s->count && d2 >= s->count)
- ret = 1;
- else
- ret = 0;
- break;
- }
- return ret;
+static void slirp_send_packet(NetDriverState *nd, const uint8_t *buf, int size)
+{
+#if 0
+ printf("input:\n");
+ hex_dump(stdout, buf, size);
+#endif
+ slirp_input(buf, size);
}
-/* val must be 0 or 1 */
-static inline void pit_set_gate(PITChannelState *s, int val)
+static void slirp_add_read_packet(NetDriverState *nd,
+ IOCanRWHandler *fd_can_read,
+ IOReadHandler *fd_read, void *opaque)
{
- switch(s->mode) {
- default:
- case 0:
- case 4:
- /* XXX: just disable/enable counting */
- break;
- case 1:
- case 5:
- if (s->gate < val) {
- /* restart counting on rising edge */
- s->count_load_time = cpu_get_ticks();
- s->count_last_edge_check_time = s->count_load_time;
- }
- break;
- case 2:
- case 3:
- if (s->gate < val) {
- /* restart counting on rising edge */
- s->count_load_time = cpu_get_ticks();
- s->count_last_edge_check_time = s->count_load_time;
- }
- /* XXX: disable/enable counting */
- break;
- }
- s->gate = val;
+ slirp_fd_opaque = opaque;
+ slirp_fd_can_read = fd_can_read;
+ slirp_fd_read = fd_read;
}
-static inline void pit_load_count(PITChannelState *s, int val)
+static int net_slirp_init(NetDriverState *nd)
{
- if (val == 0)
- val = 0x10000;
- s->count_load_time = cpu_get_ticks();
- s->count_last_edge_check_time = s->count_load_time;
- s->count = val;
- if (s == &pit_channels[0] && val <= pit_min_timer_count) {
- fprintf(stderr,
- "\nWARNING: qemu: on your system, accurate timer emulation is impossible if its frequency is more than %d Hz. If using a 2.5.xx Linux kernel, you must patch asm/param.h to change HZ from 1000 to 100.\n\n",
- PIT_FREQ / pit_min_timer_count);
+ if (!slirp_inited) {
+ slirp_inited = 1;
+ slirp_init();
}
+ nd->send_packet = slirp_send_packet;
+ nd->add_read_packet = slirp_add_read_packet;
+ pstrcpy(nd->ifname, sizeof(nd->ifname), "slirp");
+ return 0;
}
-void pit_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
+#endif /* CONFIG_SLIRP */
+
+#if !defined(_WIN32)
+#ifdef _BSD
+static int tun_open(char *ifname, int ifname_size)
{
- int channel, access;
- PITChannelState *s;
+ int fd;
+ char *dev;
+ struct stat s;
- addr &= 3;
- if (addr == 3) {
- channel = val >> 6;
- if (channel == 3)
- return;
- s = &pit_channels[channel];
- access = (val >> 4) & 3;
- switch(access) {
- case 0:
- s->latched_count = pit_get_count(s);
- s->rw_state = RW_STATE_LATCHED_WORD0;
- break;
- default:
- s->mode = (val >> 1) & 7;
- s->bcd = val & 1;
- s->rw_state = access - 1 + RW_STATE_LSB;
- break;
- }
- } else {
- s = &pit_channels[addr];
- switch(s->rw_state) {
- case RW_STATE_LSB:
- pit_load_count(s, val);
- break;
- case RW_STATE_MSB:
- pit_load_count(s, val << 8);
- break;
- case RW_STATE_WORD0:
- case RW_STATE_WORD1:
- if (s->rw_state & 1) {
- pit_load_count(s, (s->latched_count & 0xff) | (val << 8));
- } else {
- s->latched_count = val;
- }
- s->rw_state ^= 1;
- break;
- }
+ fd = open("/dev/tap", O_RDWR);
+ if (fd < 0) {
+ fprintf(stderr, "warning: could not open /dev/tap: no virtual network emulation\n");
+ return -1;
}
-}
-uint32_t pit_ioport_read(CPUState *env, uint32_t addr)
+ fstat(fd, &s);
+ dev = devname(s.st_rdev, S_IFCHR);
+ pstrcpy(ifname, ifname_size, dev);
+
+ fcntl(fd, F_SETFL, O_NONBLOCK);
+ return fd;
+}
+#else
+static int tun_open(char *ifname, int ifname_size)
{
- int ret, count;
- PITChannelState *s;
+ struct ifreq ifr;
+ int fd, ret;
- addr &= 3;
- s = &pit_channels[addr];
- switch(s->rw_state) {
- case RW_STATE_LSB:
- case RW_STATE_MSB:
- case RW_STATE_WORD0:
- case RW_STATE_WORD1:
- count = pit_get_count(s);
- if (s->rw_state & 1)
- ret = (count >> 8) & 0xff;
- else
- ret = count & 0xff;
- if (s->rw_state & 2)
- s->rw_state ^= 1;
- break;
- default:
- case RW_STATE_LATCHED_WORD0:
- case RW_STATE_LATCHED_WORD1:
- if (s->rw_state & 1)
- ret = s->latched_count >> 8;
- else
- ret = s->latched_count & 0xff;
- s->rw_state ^= 1;
- break;
+ fd = open("/dev/net/tun", O_RDWR);
+ if (fd < 0) {
+ fprintf(stderr, "warning: could not open /dev/net/tun: no virtual network emulation\n");
+ return -1;
}
- return ret;
+ memset(&ifr, 0, sizeof(ifr));
+ ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+ pstrcpy(ifr.ifr_name, IFNAMSIZ, "tun%d");
+ ret = ioctl(fd, TUNSETIFF, (void *) &ifr);
+ if (ret != 0) {
+ fprintf(stderr, "warning: could not configure /dev/net/tun: no virtual network emulation\n");
+ close(fd);
+ return -1;
+ }
+ printf("Connected to host network interface: %s\n", ifr.ifr_name);
+ pstrcpy(ifname, ifname_size, ifr.ifr_name);
+ fcntl(fd, F_SETFL, O_NONBLOCK);
+ return fd;
}
+#endif
-#if defined (TARGET_I386)
-void speaker_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
+static void tun_send_packet(NetDriverState *nd, const uint8_t *buf, int size)
{
- speaker_data_on = (val >> 1) & 1;
- pit_set_gate(&pit_channels[2], val & 1);
+ write(nd->fd, buf, size);
}
-uint32_t speaker_ioport_read(CPUState *env, uint32_t addr)
+static void tun_add_read_packet(NetDriverState *nd,
+ IOCanRWHandler *fd_can_read,
+ IOReadHandler *fd_read, void *opaque)
{
- int out;
- out = pit_get_out(&pit_channels[2]);
- dummy_refresh_clock ^= 1;
- return (speaker_data_on << 1) | pit_channels[2].gate | (out << 5) |
- (dummy_refresh_clock << 4);
+ qemu_add_fd_read_handler(nd->fd, fd_can_read, fd_read, opaque);
}
-#endif
-void pit_init(void)
+static int net_tun_init(NetDriverState *nd)
{
- PITChannelState *s;
- int i;
-
- cpu_calibrate_ticks();
-
- for(i = 0;i < 3; i++) {
- s = &pit_channels[i];
- s->mode = 3;
- s->gate = (i != 2);
- pit_load_count(s, 0);
- }
+ int pid, status;
+ char *args[3];
+ char **parg;
- register_ioport_write(0x40, 4, pit_ioport_write, 1);
- register_ioport_read(0x40, 3, pit_ioport_read, 1);
+ nd->fd = tun_open(nd->ifname, sizeof(nd->ifname));
+ if (nd->fd < 0)
+ return -1;
-#if defined (TARGET_I386)
- register_ioport_read(0x61, 1, speaker_ioport_read, 1);
- register_ioport_write(0x61, 1, speaker_ioport_write, 1);
-#endif
-}
-
-/***********************************************************/
-/* serial port emulation */
-
-#define UART_IRQ 4
-
-#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-
-#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
-#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
-#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
-#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
-
-#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
-
-#define UART_IIR_MSI 0x00 /* Modem status interrupt */
-#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
-#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
-#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
-
-/*
- * These are the definitions for the Modem Control Register
- */
-#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-#define UART_MCR_OUT2 0x08 /* Out2 complement */
-#define UART_MCR_OUT1 0x04 /* Out1 complement */
-#define UART_MCR_RTS 0x02 /* RTS complement */
-#define UART_MCR_DTR 0x01 /* DTR complement */
-
-/*
- * These are the definitions for the Modem Status Register
- */
-#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
-#define UART_MSR_RI 0x40 /* Ring Indicator */
-#define UART_MSR_DSR 0x20 /* Data Set Ready */
-#define UART_MSR_CTS 0x10 /* Clear to Send */
-#define UART_MSR_DDCD 0x08 /* Delta DCD */
-#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
-#define UART_MSR_DDSR 0x02 /* Delta DSR */
-#define UART_MSR_DCTS 0x01 /* Delta CTS */
-#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-
-#define UART_LSR_TEMT 0x40 /* Transmitter empty */
-#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
-#define UART_LSR_BI 0x10 /* Break interrupt indicator */
-#define UART_LSR_FE 0x08 /* Frame error indicator */
-#define UART_LSR_PE 0x04 /* Parity error indicator */
-#define UART_LSR_OE 0x02 /* Overrun error indicator */
-#define UART_LSR_DR 0x01 /* Receiver data ready */
-
-typedef struct SerialState {
- uint8_t divider;
- uint8_t rbr; /* receive register */
- uint8_t ier;
- uint8_t iir; /* read only */
- uint8_t lcr;
- uint8_t mcr;
- uint8_t lsr; /* read only */
- uint8_t msr;
- uint8_t scr;
- /* NOTE: this hidden state is necessary for tx irq generation as
- it can be reset while reading iir */
- int thr_ipending;
-} SerialState;
-
-SerialState serial_ports[1];
-
-void serial_update_irq(void)
-{
- SerialState *s = &serial_ports[0];
-
- if ((s->lsr & UART_LSR_DR) && (s->ier & UART_IER_RDI)) {
- s->iir = UART_IIR_RDI;
- } else if (s->thr_ipending && (s->ier & UART_IER_THRI)) {
- s->iir = UART_IIR_THRI;
- } else {
- s->iir = UART_IIR_NO_INT;
- }
- if (s->iir != UART_IIR_NO_INT) {
- pic_set_irq(UART_IRQ, 1);
- } else {
- pic_set_irq(UART_IRQ, 0);
- }
-}
-
-void serial_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
-{
- SerialState *s = &serial_ports[0];
- unsigned char ch;
- int ret;
-
- addr &= 7;
-#ifdef DEBUG_SERIAL
- printf("serial: write addr=0x%02x val=0x%02x\n", addr, val);
-#endif
- switch(addr) {
- default:
- case 0:
- if (s->lcr & UART_LCR_DLAB) {
- s->divider = (s->divider & 0xff00) | val;
- } else {
- s->thr_ipending = 0;
- s->lsr &= ~UART_LSR_THRE;
- serial_update_irq();
-
- ch = val;
- do {
- ret = write(1, &ch, 1);
- } while (ret != 1);
- s->thr_ipending = 1;
- s->lsr |= UART_LSR_THRE;
- s->lsr |= UART_LSR_TEMT;
- serial_update_irq();
+ /* try to launch network init script */
+ pid = fork();
+ if (pid >= 0) {
+ if (pid == 0) {
+ parg = args;
+ *parg++ = network_script;
+ *parg++ = nd->ifname;
+ *parg++ = NULL;
+ execv(network_script, args);
+ exit(1);
}
- break;
- case 1:
- if (s->lcr & UART_LCR_DLAB) {
- s->divider = (s->divider & 0x00ff) | (val << 8);
- } else {
- s->ier = val;
- serial_update_irq();
+ while (waitpid(pid, &status, 0) != pid);
+ if (!WIFEXITED(status) ||
+ WEXITSTATUS(status) != 0) {
+ fprintf(stderr, "%s: could not launch network script\n",
+ network_script);
}
- break;
- case 2:
- break;
- case 3:
- s->lcr = val;
- break;
- case 4:
- s->mcr = val;
- break;
- case 5:
- break;
- case 6:
- s->msr = val;
- break;
- case 7:
- s->scr = val;
- break;
}
+ nd->send_packet = tun_send_packet;
+ nd->add_read_packet = tun_add_read_packet;
+ return 0;
}
-uint32_t serial_ioport_read(CPUState *env, uint32_t addr)
+static int net_fd_init(NetDriverState *nd, int fd)
{
- SerialState *s = &serial_ports[0];
- uint32_t ret;
-
- addr &= 7;
- switch(addr) {
- default:
- case 0:
- if (s->lcr & UART_LCR_DLAB) {
- ret = s->divider & 0xff;
- } else {
- ret = s->rbr;
- s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
- serial_update_irq();
- }
- break;
- case 1:
- if (s->lcr & UART_LCR_DLAB) {
- ret = (s->divider >> 8) & 0xff;
- } else {
- ret = s->ier;
- }
- break;
- case 2:
- ret = s->iir;
- /* reset THR pending bit */
- if ((ret & 0x7) == UART_IIR_THRI)
- s->thr_ipending = 0;
- serial_update_irq();
- break;
- case 3:
- ret = s->lcr;
- break;
- case 4:
- ret = s->mcr;
- break;
- case 5:
- ret = s->lsr;
- break;
- case 6:
- if (s->mcr & UART_MCR_LOOP) {
- /* in loopback, the modem output pins are connected to the
- inputs */
- ret = (s->mcr & 0x0c) << 4;
- ret |= (s->mcr & 0x02) << 3;
- ret |= (s->mcr & 0x01) << 5;
- } else {
- ret = s->msr;
- }
- break;
- case 7:
- ret = s->scr;
- break;
- }
-#ifdef DEBUG_SERIAL
- printf("serial: read addr=0x%02x val=0x%02x\n", addr, ret);
-#endif
- return ret;
+ nd->fd = fd;
+ nd->send_packet = tun_send_packet;
+ nd->add_read_packet = tun_add_read_packet;
+ pstrcpy(nd->ifname, sizeof(nd->ifname), "tunfd");
+ return 0;
}
-#define TERM_ESCAPE 0x01 /* ctrl-a is used for escape */
-static int term_got_escape, term_command;
-static unsigned char term_cmd_buf[128];
-
-typedef struct term_cmd_t {
- const unsigned char *name;
- void (*handler)(unsigned char *params);
-} term_cmd_t;
+#endif /* !_WIN32 */
-static void do_change_cdrom (unsigned char *params);
-static void do_change_fd0 (unsigned char *params);
-static void do_change_fd1 (unsigned char *params);
+/***********************************************************/
+/* dumb display */
-static term_cmd_t term_cmds[] = {
- { "changecd", &do_change_cdrom, },
- { "changefd0", &do_change_fd0, },
- { "changefd1", &do_change_fd1, },
- { NULL, NULL, },
-};
+#ifdef _WIN32
-void term_print_help(void)
+static void term_exit(void)
{
- printf("\n"
- "C-a h print this help\n"
- "C-a x exit emulatior\n"
- "C-a d switch on/off debug log\n"
- "C-a s save disk data back to file (if -snapshot)\n"
- "C-a b send break (magic sysrq)\n"
- "C-a c send qemu internal command\n"
- "C-a C-a send C-a\n"
- );
}
-static void do_change_cdrom (unsigned char *params)
+static void term_init(void)
{
- /* Dunno how to do it... */
}
-static void do_change_fd (int fd, unsigned char *params)
-{
- unsigned char *name_start, *name_end, *ros;
- int ro;
+#else
- for (name_start = params;
- isspace(*name_start); name_start++)
- continue;
- if (*name_start == '\0')
- return;
- for (name_end = name_start;
- !isspace(*name_end) && *name_end != '\0'; name_end++)
- continue;
- for (ros = name_end + 1; isspace(*ros); ros++)
- continue;
- if (ros[0] == 'r' && ros[1] == 'o')
- ro = 1;
- else
- ro = 0;
- *name_end = '\0';
- printf("Change fd %d to %s (%s)\n", fd, name_start, params);
- fdctrl_disk_change(fd, name_start, ro);
-}
+/* init terminal so that we can grab keys */
+static struct termios oldtty;
-static void do_change_fd0 (unsigned char *params)
+static void term_exit(void)
{
- do_change_fd(0, params);
+ tcsetattr (0, TCSANOW, &oldtty);
}
-static void do_change_fd1 (unsigned char *params)
+static void term_init(void)
{
- do_change_fd(1, params);
-}
+ struct termios tty;
-static void serial_treat_command ()
-{
- unsigned char *cmd_start, *cmd_end;
- int i;
+ tcgetattr (0, &tty);
+ oldtty = tty;
- for (cmd_start = term_cmd_buf; isspace(*cmd_start); cmd_start++)
- continue;
- for (cmd_end = cmd_start;
- !isspace(*cmd_end) && *cmd_end != '\0'; cmd_end++)
- continue;
- for (i = 0; term_cmds[i].name != NULL; i++) {
- if (strlen(term_cmds[i].name) == (cmd_end - cmd_start) &&
- memcmp(term_cmds[i].name, cmd_start, cmd_end - cmd_start) == 0) {
- (*term_cmds[i].handler)(cmd_end + 1);
- return;
- }
- }
- *cmd_end = '\0';
- printf("Unknown term command: %s\n", cmd_start);
-}
+ tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP
+ |INLCR|IGNCR|ICRNL|IXON);
+ tty.c_oflag |= OPOST;
+ tty.c_lflag &= ~(ECHO|ECHONL|ICANON|IEXTEN);
+ /* if graphical mode, we allow Ctrl-C handling */
+ if (nographic)
+ tty.c_lflag &= ~ISIG;
+ tty.c_cflag &= ~(CSIZE|PARENB);
+ tty.c_cflag |= CS8;
+ tty.c_cc[VMIN] = 1;
+ tty.c_cc[VTIME] = 0;
+
+ tcsetattr (0, TCSANOW, &tty);
-extern FILE *logfile;
+ atexit(term_exit);
-/* called when a char is received */
-void serial_received_byte(SerialState *s, int ch)
-{
- if (term_command) {
- if (ch == '\n' || ch == '\r' || term_command == 127) {
- printf("\n");
- serial_treat_command();
- term_command = 0;
- } else {
- if (ch == 0x7F || ch == 0x08) {
- if (term_command > 1) {
- term_cmd_buf[--term_command - 1] = '\0';
- printf("\r "
- " ");
- printf("\r> %s", term_cmd_buf);
- }
- } else if (ch > 0x1f) {
- term_cmd_buf[term_command++ - 1] = ch;
- term_cmd_buf[term_command - 1] = '\0';
- printf("\r> %s", term_cmd_buf);
- }
- fflush(stdout);
- }
- } else if (term_got_escape) {
- term_got_escape = 0;
- switch(ch) {
- case 'h':
- term_print_help();
- break;
- case 'x':
- exit(0);
- break;
- case 's':
- {
- int i;
- for (i = 0; i < MAX_DISKS; i++) {
- if (bs_table[i])
- bdrv_commit(bs_table[i]);
- }
- }
- break;
- case 'b':
- /* send break */
- s->rbr = 0;
- s->lsr |= UART_LSR_BI | UART_LSR_DR;
- serial_update_irq();
- break;
- case 'c':
- printf("> ");
- fflush(stdout);
- term_command = 1;
- break;
- case 'd':
- cpu_set_log(CPU_LOG_ALL);
- break;
- case TERM_ESCAPE:
- goto send_char;
- }
- } else if (ch == TERM_ESCAPE) {
- term_got_escape = 1;
- } else {
- send_char:
- s->rbr = ch;
- s->lsr |= UART_LSR_DR;
- serial_update_irq();
- }
+ fcntl(0, F_SETFL, O_NONBLOCK);
}
-void serial_init(void)
-{
- SerialState *s = &serial_ports[0];
-
- s->lsr = UART_LSR_TEMT | UART_LSR_THRE;
- s->iir = UART_IIR_NO_INT;
-
-#if defined(TARGET_I386) || defined (TARGET_PPC)
- register_ioport_write(0x3f8, 8, serial_ioport_write, 1);
- register_ioport_read(0x3f8, 8, serial_ioport_read, 1);
#endif
-}
-
-/***********************************************************/
-/* ne2000 emulation */
-
-#if defined (TARGET_I386)
-#define NE2000_IOPORT 0x300
-#define NE2000_IRQ 9
-
-#define MAX_ETH_FRAME_SIZE 1514
-
-#define E8390_CMD 0x00 /* The command register (for all pages) */
-/* Page 0 register offsets. */
-#define EN0_CLDALO 0x01 /* Low byte of current local dma addr RD */
-#define EN0_STARTPG 0x01 /* Starting page of ring bfr WR */
-#define EN0_CLDAHI 0x02 /* High byte of current local dma addr RD */
-#define EN0_STOPPG 0x02 /* Ending page +1 of ring bfr WR */
-#define EN0_BOUNDARY 0x03 /* Boundary page of ring bfr RD WR */
-#define EN0_TSR 0x04 /* Transmit status reg RD */
-#define EN0_TPSR 0x04 /* Transmit starting page WR */
-#define EN0_NCR 0x05 /* Number of collision reg RD */
-#define EN0_TCNTLO 0x05 /* Low byte of tx byte count WR */
-#define EN0_FIFO 0x06 /* FIFO RD */
-#define EN0_TCNTHI 0x06 /* High byte of tx byte count WR */
-#define EN0_ISR 0x07 /* Interrupt status reg RD WR */
-#define EN0_CRDALO 0x08 /* low byte of current remote dma address RD */
-#define EN0_RSARLO 0x08 /* Remote start address reg 0 */
-#define EN0_CRDAHI 0x09 /* high byte, current remote dma address RD */
-#define EN0_RSARHI 0x09 /* Remote start address reg 1 */
-#define EN0_RCNTLO 0x0a /* Remote byte count reg WR */
-#define EN0_RCNTHI 0x0b /* Remote byte count reg WR */
-#define EN0_RSR 0x0c /* rx status reg RD */
-#define EN0_RXCR 0x0c /* RX configuration reg WR */
-#define EN0_TXCR 0x0d /* TX configuration reg WR */
-#define EN0_COUNTER0 0x0d /* Rcv alignment error counter RD */
-#define EN0_DCFG 0x0e /* Data configuration reg WR */
-#define EN0_COUNTER1 0x0e /* Rcv CRC error counter RD */
-#define EN0_IMR 0x0f /* Interrupt mask reg WR */
-#define EN0_COUNTER2 0x0f /* Rcv missed frame error counter RD */
-
-#define EN1_PHYS 0x11
-#define EN1_CURPAG 0x17
-#define EN1_MULT 0x18
-
-/* Register accessed at EN_CMD, the 8390 base addr. */
-#define E8390_STOP 0x01 /* Stop and reset the chip */
-#define E8390_START 0x02 /* Start the chip, clear reset */
-#define E8390_TRANS 0x04 /* Transmit a frame */
-#define E8390_RREAD 0x08 /* Remote read */
-#define E8390_RWRITE 0x10 /* Remote write */
-#define E8390_NODMA 0x20 /* Remote DMA */
-#define E8390_PAGE0 0x00 /* Select page chip registers */
-#define E8390_PAGE1 0x40 /* using the two high-order bits */
-#define E8390_PAGE2 0x80 /* Page 3 is invalid. */
-
-/* Bits in EN0_ISR - Interrupt status register */
-#define ENISR_RX 0x01 /* Receiver, no error */
-#define ENISR_TX 0x02 /* Transmitter, no error */
-#define ENISR_RX_ERR 0x04 /* Receiver, with error */
-#define ENISR_TX_ERR 0x08 /* Transmitter, with error */
-#define ENISR_OVER 0x10 /* Receiver overwrote the ring */
-#define ENISR_COUNTERS 0x20 /* Counters need emptying */
-#define ENISR_RDC 0x40 /* remote dma complete */
-#define ENISR_RESET 0x80 /* Reset completed */
-#define ENISR_ALL 0x3f /* Interrupts we will enable */
-
-/* Bits in received packet status byte and EN0_RSR*/
-#define ENRSR_RXOK 0x01 /* Received a good packet */
-#define ENRSR_CRC 0x02 /* CRC error */
-#define ENRSR_FAE 0x04 /* frame alignment error */
-#define ENRSR_FO 0x08 /* FIFO overrun */
-#define ENRSR_MPA 0x10 /* missed pkt */
-#define ENRSR_PHY 0x20 /* physical/multicast address */
-#define ENRSR_DIS 0x40 /* receiver disable. set in monitor mode */
-#define ENRSR_DEF 0x80 /* deferring */
-
-/* Transmitted packet status, EN0_TSR. */
-#define ENTSR_PTX 0x01 /* Packet transmitted without error */
-#define ENTSR_ND 0x02 /* The transmit wasn't deferred. */
-#define ENTSR_COL 0x04 /* The transmit collided at least once. */
-#define ENTSR_ABT 0x08 /* The transmit collided 16 times, and was deferred. */
-#define ENTSR_CRS 0x10 /* The carrier sense was lost. */
-#define ENTSR_FU 0x20 /* A "FIFO underrun" occurred during transmit. */
-#define ENTSR_CDH 0x40 /* The collision detect "heartbeat" signal was lost. */
-#define ENTSR_OWC 0x80 /* There was an out-of-window collision. */
-
-#define NE2000_MEM_SIZE 32768
-
-typedef struct NE2000State {
- uint8_t cmd;
- uint32_t start;
- uint32_t stop;
- uint8_t boundary;
- uint8_t tsr;
- uint8_t tpsr;
- uint16_t tcnt;
- uint16_t rcnt;
- uint32_t rsar;
- uint8_t isr;
- uint8_t dcfg;
- uint8_t imr;
- uint8_t phys[6]; /* mac address */
- uint8_t curpag;
- uint8_t mult[8]; /* multicast mask array */
- uint8_t mem[NE2000_MEM_SIZE];
-} NE2000State;
-
-NE2000State ne2000_state;
-int net_fd = -1;
-char network_script[1024];
-
-void ne2000_reset(void)
-{
- NE2000State *s = &ne2000_state;
- int i;
-
- s->isr = ENISR_RESET;
- s->mem[0] = 0x52;
- s->mem[1] = 0x54;
- s->mem[2] = 0x00;
- s->mem[3] = 0x12;
- s->mem[4] = 0x34;
- s->mem[5] = 0x56;
- s->mem[14] = 0x57;
- s->mem[15] = 0x57;
- /* duplicate prom data */
- for(i = 15;i >= 0; i--) {
- s->mem[2 * i] = s->mem[i];
- s->mem[2 * i + 1] = s->mem[i];
- }
+static void dumb_update(DisplayState *ds, int x, int y, int w, int h)
+{
}
-void ne2000_update_irq(NE2000State *s)
+static void dumb_resize(DisplayState *ds, int w, int h)
{
- int isr;
- isr = s->isr & s->imr;
- if (isr)
- pic_set_irq(NE2000_IRQ, 1);
- else
- pic_set_irq(NE2000_IRQ, 0);
}
-int net_init(void)
+static void dumb_refresh(DisplayState *ds)
{
- struct ifreq ifr;
- int fd, ret, pid, status;
-
- fd = open("/dev/net/tun", O_RDWR);
- if (fd < 0) {
- fprintf(stderr, "warning: could not open /dev/net/tun: no virtual network emulation\n");
- return -1;
- }
- memset(&ifr, 0, sizeof(ifr));
- ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
- pstrcpy(ifr.ifr_name, IFNAMSIZ, "tun%d");
- ret = ioctl(fd, TUNSETIFF, (void *) &ifr);
- if (ret != 0) {
- fprintf(stderr, "warning: could not configure /dev/net/tun: no virtual network emulation\n");
- close(fd);
- return -1;
- }
- printf("Connected to host network interface: %s\n", ifr.ifr_name);
- fcntl(fd, F_SETFL, O_NONBLOCK);
- net_fd = fd;
-
- /* try to launch network init script */
- pid = fork();
- if (pid >= 0) {
- if (pid == 0) {
- execl(network_script, network_script, ifr.ifr_name, NULL);
- exit(1);
- }
- while (waitpid(pid, &status, 0) != pid);
- if (!WIFEXITED(status) ||
- WEXITSTATUS(status) != 0) {
- fprintf(stderr, "%s: could not launch network script for '%s'\n",
- network_script, ifr.ifr_name);
- }
- }
- return 0;
+ vga_update_display();
}
-void net_send_packet(NE2000State *s, const uint8_t *buf, int size)
+void dumb_display_init(DisplayState *ds)
{
-#ifdef DEBUG_NE2000
- printf("NE2000: sending packet size=%d\n", size);
-#endif
- write(net_fd, buf, size);
+ ds->data = NULL;
+ ds->linesize = 0;
+ ds->depth = 0;
+ ds->dpy_update = dumb_update;
+ ds->dpy_resize = dumb_resize;
+ ds->dpy_refresh = dumb_refresh;
}
-/* return true if the NE2000 can receive more data */
-int ne2000_can_receive(NE2000State *s)
+#if !defined(CONFIG_SOFTMMU)
+/***********************************************************/
+/* cpu signal handler */
+static void host_segv_handler(int host_signum, siginfo_t *info,
+ void *puc)
{
- int avail, index, boundary;
-
- if (s->cmd & E8390_STOP)
- return 0;
- index = s->curpag << 8;
- boundary = s->boundary << 8;
- if (index < boundary)
- avail = boundary - index;
- else
- avail = (s->stop - s->start) - (index - boundary);
- if (avail < (MAX_ETH_FRAME_SIZE + 4))
- return 0;
- return 1;
+ if (cpu_signal_handler(host_signum, info, puc))
+ return;
+ term_exit();
+ abort();
}
+#endif
-void ne2000_receive(NE2000State *s, uint8_t *buf, int size)
-{
- uint8_t *p;
- int total_len, next, avail, len, index;
+/***********************************************************/
+/* I/O handling */
-#if defined(DEBUG_NE2000)
- printf("NE2000: received len=%d\n", size);
-#endif
+#define MAX_IO_HANDLERS 64
- index = s->curpag << 8;
- /* 4 bytes for header */
- total_len = size + 4;
- /* address for next packet (4 bytes for CRC) */
- next = index + ((total_len + 4 + 255) & ~0xff);
- if (next >= s->stop)
- next -= (s->stop - s->start);
- /* prepare packet header */
- p = s->mem + index;
- p[0] = ENRSR_RXOK; /* receive status */
- p[1] = next >> 8;
- p[2] = total_len;
- p[3] = total_len >> 8;
- index += 4;
-
- /* write packet data */
- while (size > 0) {
- avail = s->stop - index;
- len = size;
- if (len > avail)
- len = avail;
- memcpy(s->mem + index, buf, len);
- buf += len;
- index += len;
- if (index == s->stop)
- index = s->start;
- size -= len;
- }
- s->curpag = next >> 8;
-
- /* now we can signal we have receive something */
- s->isr |= ENISR_RX;
- ne2000_update_irq(s);
-}
+typedef struct IOHandlerRecord {
+ int fd;
+ IOCanRWHandler *fd_can_read;
+ IOReadHandler *fd_read;
+ void *opaque;
+ /* temporary data */
+ struct pollfd *ufd;
+ int max_size;
+ struct IOHandlerRecord *next;
+} IOHandlerRecord;
-void ne2000_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
+static IOHandlerRecord *first_io_handler;
+
+int qemu_add_fd_read_handler(int fd, IOCanRWHandler *fd_can_read,
+ IOReadHandler *fd_read, void *opaque)
{
- NE2000State *s = &ne2000_state;
- int offset, page;
+ IOHandlerRecord *ioh;
- addr &= 0xf;
-#ifdef DEBUG_NE2000
- printf("NE2000: write addr=0x%x val=0x%02x\n", addr, val);
-#endif
- if (addr == E8390_CMD) {
- /* control register */
- s->cmd = val;
- if (val & E8390_START) {
- /* test specific case: zero length transfert */
- if ((val & (E8390_RREAD | E8390_RWRITE)) &&
- s->rcnt == 0) {
- s->isr |= ENISR_RDC;
- ne2000_update_irq(s);
- }
- if (val & E8390_TRANS) {
- net_send_packet(s, s->mem + (s->tpsr << 8), s->tcnt);
- /* signal end of transfert */
- s->tsr = ENTSR_PTX;
- s->isr |= ENISR_TX;
- ne2000_update_irq(s);
- }
- }
- } else {
- page = s->cmd >> 6;
- offset = addr | (page << 4);
- switch(offset) {
- case EN0_STARTPG:
- s->start = val << 8;
- break;
- case EN0_STOPPG:
- s->stop = val << 8;
- break;
- case EN0_BOUNDARY:
- s->boundary = val;
- break;
- case EN0_IMR:
- s->imr = val;
- ne2000_update_irq(s);
- break;
- case EN0_TPSR:
- s->tpsr = val;
- break;
- case EN0_TCNTLO:
- s->tcnt = (s->tcnt & 0xff00) | val;
- break;
- case EN0_TCNTHI:
- s->tcnt = (s->tcnt & 0x00ff) | (val << 8);
- break;
- case EN0_RSARLO:
- s->rsar = (s->rsar & 0xff00) | val;
- break;
- case EN0_RSARHI:
- s->rsar = (s->rsar & 0x00ff) | (val << 8);
- break;
- case EN0_RCNTLO:
- s->rcnt = (s->rcnt & 0xff00) | val;
- break;
- case EN0_RCNTHI:
- s->rcnt = (s->rcnt & 0x00ff) | (val << 8);
- break;
- case EN0_DCFG:
- s->dcfg = val;
- break;
- case EN0_ISR:
- s->isr &= ~val;
- ne2000_update_irq(s);
- break;
- case EN1_PHYS ... EN1_PHYS + 5:
- s->phys[offset - EN1_PHYS] = val;
- break;
- case EN1_CURPAG:
- s->curpag = val;
- break;
- case EN1_MULT ... EN1_MULT + 7:
- s->mult[offset - EN1_MULT] = val;
- break;
- }
- }
+ ioh = qemu_mallocz(sizeof(IOHandlerRecord));
+ if (!ioh)
+ return -1;
+ ioh->fd = fd;
+ ioh->fd_can_read = fd_can_read;
+ ioh->fd_read = fd_read;
+ ioh->opaque = opaque;
+ ioh->next = first_io_handler;
+ first_io_handler = ioh;
+ return 0;
}
-uint32_t ne2000_ioport_read(CPUState *env, uint32_t addr)
+void qemu_del_fd_read_handler(int fd)
{
- NE2000State *s = &ne2000_state;
- int offset, page, ret;
+ IOHandlerRecord **pioh, *ioh;
- addr &= 0xf;
- if (addr == E8390_CMD) {
- ret = s->cmd;
- } else {
- page = s->cmd >> 6;
- offset = addr | (page << 4);
- switch(offset) {
- case EN0_TSR:
- ret = s->tsr;
- break;
- case EN0_BOUNDARY:
- ret = s->boundary;
- break;
- case EN0_ISR:
- ret = s->isr;
- break;
- case EN1_PHYS ... EN1_PHYS + 5:
- ret = s->phys[offset - EN1_PHYS];
- break;
- case EN1_CURPAG:
- ret = s->curpag;
- break;
- case EN1_MULT ... EN1_MULT + 7:
- ret = s->mult[offset - EN1_MULT];
+ pioh = &first_io_handler;
+ for(;;) {
+ ioh = *pioh;
+ if (ioh == NULL)
break;
- default:
- ret = 0x00;
+ if (ioh->fd == fd) {
+ *pioh = ioh->next;
break;
}
+ pioh = &ioh->next;
}
-#ifdef DEBUG_NE2000
- printf("NE2000: read addr=0x%x val=%02x\n", addr, ret);
-#endif
- return ret;
}
-void ne2000_asic_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
-{
- NE2000State *s = &ne2000_state;
- uint8_t *p;
-
-#ifdef DEBUG_NE2000
- printf("NE2000: asic write val=0x%04x\n", val);
-#endif
- p = s->mem + s->rsar;
- if (s->dcfg & 0x01) {
- /* 16 bit access */
- p[0] = val;
- p[1] = val >> 8;
- s->rsar += 2;
- s->rcnt -= 2;
- } else {
- /* 8 bit access */
- p[0] = val;
- s->rsar++;
- s->rcnt--;
- }
- /* wrap */
- if (s->rsar == s->stop)
- s->rsar = s->start;
- if (s->rcnt == 0) {
- /* signal end of transfert */
- s->isr |= ENISR_RDC;
- ne2000_update_irq(s);
- }
-}
+/***********************************************************/
+/* savevm/loadvm support */
-uint32_t ne2000_asic_ioport_read(CPUState *env, uint32_t addr)
+void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, int size)
{
- NE2000State *s = &ne2000_state;
- uint8_t *p;
- int ret;
-
- p = s->mem + s->rsar;
- if (s->dcfg & 0x01) {
- /* 16 bit access */
- ret = p[0] | (p[1] << 8);
- s->rsar += 2;
- s->rcnt -= 2;
- } else {
- /* 8 bit access */
- ret = p[0];
- s->rsar++;
- s->rcnt--;
- }
- /* wrap */
- if (s->rsar == s->stop)
- s->rsar = s->start;
- if (s->rcnt == 0) {
- /* signal end of transfert */
- s->isr |= ENISR_RDC;
- ne2000_update_irq(s);
- }
-#ifdef DEBUG_NE2000
- printf("NE2000: asic read val=0x%04x\n", ret);
-#endif
- return ret;
+ fwrite(buf, 1, size, f);
}
-void ne2000_reset_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
+void qemu_put_byte(QEMUFile *f, int v)
{
- /* nothing to do (end of reset pulse) */
+ fputc(v, f);
}
-uint32_t ne2000_reset_ioport_read(CPUState *env, uint32_t addr)
+void qemu_put_be16(QEMUFile *f, unsigned int v)
{
- ne2000_reset();
- return 0;
+ qemu_put_byte(f, v >> 8);
+ qemu_put_byte(f, v);
}
-void ne2000_init(void)
+void qemu_put_be32(QEMUFile *f, unsigned int v)
{
- register_ioport_write(NE2000_IOPORT, 16, ne2000_ioport_write, 1);
- register_ioport_read(NE2000_IOPORT, 16, ne2000_ioport_read, 1);
-
- register_ioport_write(NE2000_IOPORT + 0x10, 1, ne2000_asic_ioport_write, 1);
- register_ioport_read(NE2000_IOPORT + 0x10, 1, ne2000_asic_ioport_read, 1);
- register_ioport_write(NE2000_IOPORT + 0x10, 2, ne2000_asic_ioport_write, 2);
- register_ioport_read(NE2000_IOPORT + 0x10, 2, ne2000_asic_ioport_read, 2);
-
- register_ioport_write(NE2000_IOPORT + 0x1f, 1, ne2000_reset_ioport_write, 1);
- register_ioport_read(NE2000_IOPORT + 0x1f, 1, ne2000_reset_ioport_read, 1);
- ne2000_reset();
+ qemu_put_byte(f, v >> 24);
+ qemu_put_byte(f, v >> 16);
+ qemu_put_byte(f, v >> 8);
+ qemu_put_byte(f, v);
}
-#endif
-/***********************************************************/
-/* PC floppy disk controler emulation glue */
-#define PC_FDC_DMA 0x2
-#define PC_FDC_IRQ 0x6
-#define PC_FDC_BASE 0x3F0
-
-static void fdctrl_register (unsigned char **disknames, int ro,
- char boot_device)
+void qemu_put_be64(QEMUFile *f, uint64_t v)
{
- int i;
-
- fdctrl_init(PC_FDC_IRQ, PC_FDC_DMA, 0, PC_FDC_BASE, boot_device);
- for (i = 0; i < MAX_FD; i++) {
- if (disknames[i] != NULL)
- fdctrl_disk_change(i, disknames[i], ro);
- }
-}
-
-/***********************************************************/
-/* keyboard emulation */
-
-/* Keyboard Controller Commands */
-#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
-#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */
-#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */
-#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */
-#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */
-#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */
-#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */
-#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */
-#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */
-#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */
-#define KBD_CCMD_READ_INPORT 0xC0 /* read input port */
-#define KBD_CCMD_READ_OUTPORT 0xD0 /* read output port */
-#define KBD_CCMD_WRITE_OUTPORT 0xD1 /* write output port */
-#define KBD_CCMD_WRITE_OBUF 0xD2
-#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if
- initiated by the auxiliary device */
-#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */
-#define KBD_CCMD_DISABLE_A20 0xDD /* HP vectra only ? */
-#define KBD_CCMD_ENABLE_A20 0xDF /* HP vectra only ? */
-#define KBD_CCMD_RESET 0xFE
-
-/* Keyboard Commands */
-#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
-#define KBD_CMD_ECHO 0xEE
-#define KBD_CMD_GET_ID 0xF2 /* get keyboard ID */
-#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */
-#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */
-#define KBD_CMD_RESET_DISABLE 0xF5 /* reset and disable scanning */
-#define KBD_CMD_RESET_ENABLE 0xF6 /* reset and enable scanning */
-#define KBD_CMD_RESET 0xFF /* Reset */
-
-/* Keyboard Replies */
-#define KBD_REPLY_POR 0xAA /* Power on reset */
-#define KBD_REPLY_ACK 0xFA /* Command ACK */
-#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */
-
-/* Status Register Bits */
-#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
-#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
-#define KBD_STAT_SELFTEST 0x04 /* Self test successful */
-#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */
-#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */
-#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */
-#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
-#define KBD_STAT_PERR 0x80 /* Parity error */
-
-/* Controller Mode Register Bits */
-#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */
-#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */
-#define KBD_MODE_SYS 0x04 /* The system flag (?) */
-#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */
-#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */
-#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */
-#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
-#define KBD_MODE_RFU 0x80
-
-/* Mouse Commands */
-#define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */
-#define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */
-#define AUX_SET_RES 0xE8 /* Set resolution */
-#define AUX_GET_SCALE 0xE9 /* Get scaling factor */
-#define AUX_SET_STREAM 0xEA /* Set stream mode */
-#define AUX_POLL 0xEB /* Poll */
-#define AUX_RESET_WRAP 0xEC /* Reset wrap mode */
-#define AUX_SET_WRAP 0xEE /* Set wrap mode */
-#define AUX_SET_REMOTE 0xF0 /* Set remote mode */
-#define AUX_GET_TYPE 0xF2 /* Get type */
-#define AUX_SET_SAMPLE 0xF3 /* Set sample rate */
-#define AUX_ENABLE_DEV 0xF4 /* Enable aux device */
-#define AUX_DISABLE_DEV 0xF5 /* Disable aux device */
-#define AUX_SET_DEFAULT 0xF6
-#define AUX_RESET 0xFF /* Reset aux device */
-#define AUX_ACK 0xFA /* Command byte ACK. */
-
-#define MOUSE_STATUS_REMOTE 0x40
-#define MOUSE_STATUS_ENABLED 0x20
-#define MOUSE_STATUS_SCALE21 0x10
-
-#define KBD_QUEUE_SIZE 256
-
-typedef struct {
- uint8_t data[KBD_QUEUE_SIZE];
- int rptr, wptr, count;
-} KBDQueue;
-
-typedef struct KBDState {
- KBDQueue queues[2];
- uint8_t write_cmd; /* if non zero, write data to port 60 is expected */
- uint8_t status;
- uint8_t mode;
- /* keyboard state */
- int kbd_write_cmd;
- int scan_enabled;
- /* mouse state */
- int mouse_write_cmd;
- uint8_t mouse_status;
- uint8_t mouse_resolution;
- uint8_t mouse_sample_rate;
- uint8_t mouse_wrap;
- uint8_t mouse_type; /* 0 = PS2, 3 = IMPS/2, 4 = IMEX */
- uint8_t mouse_detect_state;
- int mouse_dx; /* current values, needed for 'poll' mode */
- int mouse_dy;
- int mouse_dz;
- uint8_t mouse_buttons;
-} KBDState;
-
-KBDState kbd_state;
-int reset_requested;
-
-/* update irq and KBD_STAT_[MOUSE_]OBF */
-/* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be
- incorrect, but it avoids having to simulate exact delays */
-static void kbd_update_irq(KBDState *s)
-{
- int irq12_level, irq1_level;
-
- irq1_level = 0;
- irq12_level = 0;
- s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF);
- if (s->queues[0].count != 0 ||
- s->queues[1].count != 0) {
- s->status |= KBD_STAT_OBF;
- if (s->queues[1].count != 0) {
- s->status |= KBD_STAT_MOUSE_OBF;
- if (s->mode & KBD_MODE_MOUSE_INT)
- irq12_level = 1;
- } else {
- if ((s->mode & KBD_MODE_KBD_INT) &&
- !(s->mode & KBD_MODE_DISABLE_KBD))
- irq1_level = 1;
- }
- }
- pic_set_irq(1, irq1_level);
- pic_set_irq(12, irq12_level);
+ qemu_put_be32(f, v >> 32);
+ qemu_put_be32(f, v);
}
-static void kbd_queue(KBDState *s, int b, int aux)
+int qemu_get_buffer(QEMUFile *f, uint8_t *buf, int size)
{
- KBDQueue *q = &kbd_state.queues[aux];
-
-#if defined(DEBUG_MOUSE) || defined(DEBUG_KBD)
- if (aux)
- printf("mouse event: 0x%02x\n", b);
-#ifdef DEBUG_KBD
- else
- printf("kbd event: 0x%02x\n", b);
-#endif
-#endif
- if (q->count >= KBD_QUEUE_SIZE)
- return;
- q->data[q->wptr] = b;
- if (++q->wptr == KBD_QUEUE_SIZE)
- q->wptr = 0;
- q->count++;
- kbd_update_irq(s);
+ return fread(buf, 1, size, f);
}
-void kbd_put_keycode(int keycode)
+int qemu_get_byte(QEMUFile *f)
{
- KBDState *s = &kbd_state;
- kbd_queue(s, keycode, 0);
+ int v;
+ v = fgetc(f);
+ if (v == EOF)
+ return 0;
+ else
+ return v;
}
-uint32_t kbd_read_status(CPUState *env, uint32_t addr)
+unsigned int qemu_get_be16(QEMUFile *f)
{
- KBDState *s = &kbd_state;
- int val;
- val = s->status;
-#if defined(DEBUG_KBD)
- printf("kbd: read status=0x%02x\n", val);
-#endif
- return val;
+ unsigned int v;
+ v = qemu_get_byte(f) << 8;
+ v |= qemu_get_byte(f);
+ return v;
}
-void kbd_write_command(CPUState *env, uint32_t addr, uint32_t val)
+unsigned int qemu_get_be32(QEMUFile *f)
{
- KBDState *s = &kbd_state;
-
-#ifdef DEBUG_KBD
- printf("kbd: write cmd=0x%02x\n", val);
-#endif
- switch(val) {
- case KBD_CCMD_READ_MODE:
- kbd_queue(s, s->mode, 0);
- break;
- case KBD_CCMD_WRITE_MODE:
- case KBD_CCMD_WRITE_OBUF:
- case KBD_CCMD_WRITE_AUX_OBUF:
- case KBD_CCMD_WRITE_MOUSE:
- case KBD_CCMD_WRITE_OUTPORT:
- s->write_cmd = val;
- break;
- case KBD_CCMD_MOUSE_DISABLE:
- s->mode |= KBD_MODE_DISABLE_MOUSE;
- break;
- case KBD_CCMD_MOUSE_ENABLE:
- s->mode &= ~KBD_MODE_DISABLE_MOUSE;
- break;
- case KBD_CCMD_TEST_MOUSE:
- kbd_queue(s, 0x00, 0);
- break;
- case KBD_CCMD_SELF_TEST:
- s->status |= KBD_STAT_SELFTEST;
- kbd_queue(s, 0x55, 0);
- break;
- case KBD_CCMD_KBD_TEST:
- kbd_queue(s, 0x00, 0);
- break;
- case KBD_CCMD_KBD_DISABLE:
- s->mode |= KBD_MODE_DISABLE_KBD;
- kbd_update_irq(s);
- break;
- case KBD_CCMD_KBD_ENABLE:
- s->mode &= ~KBD_MODE_DISABLE_KBD;
- kbd_update_irq(s);
- break;
- case KBD_CCMD_READ_INPORT:
- kbd_queue(s, 0x00, 0);
- break;
- case KBD_CCMD_READ_OUTPORT:
- /* XXX: check that */
-#ifdef TARGET_I386
- val = 0x01 | (a20_enabled << 1);
-#else
- val = 0x01;
-#endif
- if (s->status & KBD_STAT_OBF)
- val |= 0x10;
- if (s->status & KBD_STAT_MOUSE_OBF)
- val |= 0x20;
- kbd_queue(s, val, 0);
- break;
-#ifdef TARGET_I386
- case KBD_CCMD_ENABLE_A20:
- cpu_x86_set_a20(env, 1);
- break;
- case KBD_CCMD_DISABLE_A20:
- cpu_x86_set_a20(env, 0);
- break;
-#endif
- case KBD_CCMD_RESET:
- reset_requested = 1;
- cpu_interrupt(global_env, CPU_INTERRUPT_EXIT);
- break;
- case 0xff:
- /* ignore that - I don't know what is its use */
- break;
- default:
- fprintf(stderr, "qemu: unsupported keyboard cmd=0x%02x\n", val);
- break;
- }
+ unsigned int v;
+ v = qemu_get_byte(f) << 24;
+ v |= qemu_get_byte(f) << 16;
+ v |= qemu_get_byte(f) << 8;
+ v |= qemu_get_byte(f);
+ return v;
}
-uint32_t kbd_read_data(CPUState *env, uint32_t addr)
+uint64_t qemu_get_be64(QEMUFile *f)
{
- KBDState *s = &kbd_state;
- KBDQueue *q;
- int val, index;
-
- q = &s->queues[0]; /* first check KBD data */
- if (q->count == 0)
- q = &s->queues[1]; /* then check AUX data */
- if (q->count == 0) {
- /* NOTE: if no data left, we return the last keyboard one
- (needed for EMM386) */
- /* XXX: need a timer to do things correctly */
- q = &s->queues[0];
- index = q->rptr - 1;
- if (index < 0)
- index = KBD_QUEUE_SIZE - 1;
- val = q->data[index];
- } else {
- val = q->data[q->rptr];
- if (++q->rptr == KBD_QUEUE_SIZE)
- q->rptr = 0;
- q->count--;
- /* reading deasserts IRQ */
- if (q == &s->queues[0])
- pic_set_irq(1, 0);
- else
- pic_set_irq(12, 0);
- }
- /* reassert IRQs if data left */
- kbd_update_irq(s);
-#ifdef DEBUG_KBD
- printf("kbd: read data=0x%02x\n", val);
-#endif
- return val;
+ uint64_t v;
+ v = (uint64_t)qemu_get_be32(f) << 32;
+ v |= qemu_get_be32(f);
+ return v;
}
-static void kbd_reset_keyboard(KBDState *s)
+int64_t qemu_ftell(QEMUFile *f)
{
- s->scan_enabled = 1;
+ return ftell(f);
}
-static void kbd_write_keyboard(KBDState *s, int val)
+int64_t qemu_fseek(QEMUFile *f, int64_t pos, int whence)
{
- switch(s->kbd_write_cmd) {
- default:
- case -1:
- switch(val) {
- case 0x00:
- kbd_queue(s, KBD_REPLY_ACK, 0);
- break;
- case 0x05:
- kbd_queue(s, KBD_REPLY_RESEND, 0);
- break;
- case KBD_CMD_GET_ID:
- kbd_queue(s, KBD_REPLY_ACK, 0);
- kbd_queue(s, 0xab, 0);
- kbd_queue(s, 0x83, 0);
- break;
- case KBD_CMD_ECHO:
- kbd_queue(s, KBD_CMD_ECHO, 0);
- break;
- case KBD_CMD_ENABLE:
- s->scan_enabled = 1;
- kbd_queue(s, KBD_REPLY_ACK, 0);
- break;
- case KBD_CMD_SET_LEDS:
- case KBD_CMD_SET_RATE:
- s->kbd_write_cmd = val;
- kbd_queue(s, KBD_REPLY_ACK, 0);
- break;
- case KBD_CMD_RESET_DISABLE:
- kbd_reset_keyboard(s);
- s->scan_enabled = 0;
- kbd_queue(s, KBD_REPLY_ACK, 0);
- break;
- case KBD_CMD_RESET_ENABLE:
- kbd_reset_keyboard(s);
- s->scan_enabled = 1;
- kbd_queue(s, KBD_REPLY_ACK, 0);
- break;
- case KBD_CMD_RESET:
- kbd_reset_keyboard(s);
- kbd_queue(s, KBD_REPLY_ACK, 0);
- kbd_queue(s, KBD_REPLY_POR, 0);
- break;
- default:
- kbd_queue(s, KBD_REPLY_ACK, 0);
- break;
- }
- break;
- case KBD_CMD_SET_LEDS:
- kbd_queue(s, KBD_REPLY_ACK, 0);
- s->kbd_write_cmd = -1;
- break;
- case KBD_CMD_SET_RATE:
- kbd_queue(s, KBD_REPLY_ACK, 0);
- s->kbd_write_cmd = -1;
- break;
- }
+ if (fseek(f, pos, whence) < 0)
+ return -1;
+ return ftell(f);
}
-static void kbd_mouse_send_packet(KBDState *s)
-{
- unsigned int b;
- int dx1, dy1, dz1;
-
- dx1 = s->mouse_dx;
- dy1 = s->mouse_dy;
- dz1 = s->mouse_dz;
- /* XXX: increase range to 8 bits ? */
- if (dx1 > 127)
- dx1 = 127;
- else if (dx1 < -127)
- dx1 = -127;
- if (dy1 > 127)
- dy1 = 127;
- else if (dy1 < -127)
- dy1 = -127;
- b = 0x08 | ((dx1 < 0) << 4) | ((dy1 < 0) << 5) | (s->mouse_buttons & 0x07);
- kbd_queue(s, b, 1);
- kbd_queue(s, dx1 & 0xff, 1);
- kbd_queue(s, dy1 & 0xff, 1);
- /* extra byte for IMPS/2 or IMEX */
- switch(s->mouse_type) {
- default:
- break;
- case 3:
- if (dz1 > 127)
- dz1 = 127;
- else if (dz1 < -127)
- dz1 = -127;
- kbd_queue(s, dz1 & 0xff, 1);
- break;
- case 4:
- if (dz1 > 7)
- dz1 = 7;
- else if (dz1 < -7)
- dz1 = -7;
- b = (dz1 & 0x0f) | ((s->mouse_buttons & 0x18) << 1);
- kbd_queue(s, b, 1);
- break;
- }
+typedef struct SaveStateEntry {
+ char idstr[256];
+ int instance_id;
+ int version_id;
+ SaveStateHandler *save_state;
+ LoadStateHandler *load_state;
+ void *opaque;
+ struct SaveStateEntry *next;
+} SaveStateEntry;
- /* update deltas */
- s->mouse_dx -= dx1;
- s->mouse_dy -= dy1;
- s->mouse_dz -= dz1;
-}
+static SaveStateEntry *first_se;
-void kbd_mouse_event(int dx, int dy, int dz, int buttons_state)
+int register_savevm(const char *idstr,
+ int instance_id,
+ int version_id,
+ SaveStateHandler *save_state,
+ LoadStateHandler *load_state,
+ void *opaque)
{
- KBDState *s = &kbd_state;
+ SaveStateEntry *se, **pse;
- /* check if deltas are recorded when disabled */
- if (!(s->mouse_status & MOUSE_STATUS_ENABLED))
- return;
-
- s->mouse_dx += dx;
- s->mouse_dy -= dy;
- s->mouse_dz += dz;
- s->mouse_buttons = buttons_state;
-
- if (!(s->mouse_status & MOUSE_STATUS_REMOTE) &&
- (s->queues[1].count < (KBD_QUEUE_SIZE - 16))) {
- for(;;) {
- /* if not remote, send event. Multiple events are sent if
- too big deltas */
- kbd_mouse_send_packet(s);
- if (s->mouse_dx == 0 && s->mouse_dy == 0 && s->mouse_dz == 0)
- break;
- }
- }
+ se = qemu_malloc(sizeof(SaveStateEntry));
+ if (!se)
+ return -1;
+ pstrcpy(se->idstr, sizeof(se->idstr), idstr);
+ se->instance_id = instance_id;
+ se->version_id = version_id;
+ se->save_state = save_state;
+ se->load_state = load_state;
+ se->opaque = opaque;
+ se->next = NULL;
+
+ /* add at the end of list */
+ pse = &first_se;
+ while (*pse != NULL)
+ pse = &(*pse)->next;
+ *pse = se;
+ return 0;
}
-static void kbd_write_mouse(KBDState *s, int val)
-{
-#ifdef DEBUG_MOUSE
- printf("kbd: write mouse 0x%02x\n", val);
-#endif
- switch(s->mouse_write_cmd) {
- default:
- case -1:
- /* mouse command */
- if (s->mouse_wrap) {
- if (val == AUX_RESET_WRAP) {
- s->mouse_wrap = 0;
- kbd_queue(s, AUX_ACK, 1);
- return;
- } else if (val != AUX_RESET) {
- kbd_queue(s, val, 1);
- return;
- }
- }
- switch(val) {
- case AUX_SET_SCALE11:
- s->mouse_status &= ~MOUSE_STATUS_SCALE21;
- kbd_queue(s, AUX_ACK, 1);
- break;
- case AUX_SET_SCALE21:
- s->mouse_status |= MOUSE_STATUS_SCALE21;
- kbd_queue(s, AUX_ACK, 1);
- break;
- case AUX_SET_STREAM:
- s->mouse_status &= ~MOUSE_STATUS_REMOTE;
- kbd_queue(s, AUX_ACK, 1);
- break;
- case AUX_SET_WRAP:
- s->mouse_wrap = 1;
- kbd_queue(s, AUX_ACK, 1);
- break;
- case AUX_SET_REMOTE:
- s->mouse_status |= MOUSE_STATUS_REMOTE;
- kbd_queue(s, AUX_ACK, 1);
- break;
- case AUX_GET_TYPE:
- kbd_queue(s, AUX_ACK, 1);
- kbd_queue(s, s->mouse_type, 1);
- break;
- case AUX_SET_RES:
- case AUX_SET_SAMPLE:
- s->mouse_write_cmd = val;
- kbd_queue(s, AUX_ACK, 1);
- break;
- case AUX_GET_SCALE:
- kbd_queue(s, AUX_ACK, 1);
- kbd_queue(s, s->mouse_status, 1);
- kbd_queue(s, s->mouse_resolution, 1);
- kbd_queue(s, s->mouse_sample_rate, 1);
- break;
- case AUX_POLL:
- kbd_queue(s, AUX_ACK, 1);
- kbd_mouse_send_packet(s);
- break;
- case AUX_ENABLE_DEV:
- s->mouse_status |= MOUSE_STATUS_ENABLED;
- kbd_queue(s, AUX_ACK, 1);
- break;
- case AUX_DISABLE_DEV:
- s->mouse_status &= ~MOUSE_STATUS_ENABLED;
- kbd_queue(s, AUX_ACK, 1);
- break;
- case AUX_SET_DEFAULT:
- s->mouse_sample_rate = 100;
- s->mouse_resolution = 2;
- s->mouse_status = 0;
- kbd_queue(s, AUX_ACK, 1);
- break;
- case AUX_RESET:
- s->mouse_sample_rate = 100;
- s->mouse_resolution = 2;
- s->mouse_status = 0;
- kbd_queue(s, AUX_ACK, 1);
- kbd_queue(s, 0xaa, 1);
- kbd_queue(s, s->mouse_type, 1);
- break;
- default:
- break;
- }
- break;
- case AUX_SET_SAMPLE:
- s->mouse_sample_rate = val;
-#if 0
- /* detect IMPS/2 or IMEX */
- switch(s->mouse_detect_state) {
- default:
- case 0:
- if (val == 200)
- s->mouse_detect_state = 1;
- break;
- case 1:
- if (val == 100)
- s->mouse_detect_state = 2;
- else if (val == 200)
- s->mouse_detect_state = 3;
- else
- s->mouse_detect_state = 0;
- break;
- case 2:
- if (val == 80)
- s->mouse_type = 3; /* IMPS/2 */
- s->mouse_detect_state = 0;
- break;
- case 3:
- if (val == 80)
- s->mouse_type = 4; /* IMEX */
- s->mouse_detect_state = 0;
- break;
- }
-#endif
- kbd_queue(s, AUX_ACK, 1);
- s->mouse_write_cmd = -1;
- break;
- case AUX_SET_RES:
- s->mouse_resolution = val;
- kbd_queue(s, AUX_ACK, 1);
- s->mouse_write_cmd = -1;
- break;
- }
-}
+#define QEMU_VM_FILE_MAGIC 0x5145564d
+#define QEMU_VM_FILE_VERSION 0x00000001
-void kbd_write_data(CPUState *env, uint32_t addr, uint32_t val)
+int qemu_savevm(const char *filename)
{
- KBDState *s = &kbd_state;
+ SaveStateEntry *se;
+ QEMUFile *f;
+ int len, len_pos, cur_pos, saved_vm_running, ret;
-#ifdef DEBUG_KBD
- printf("kbd: write data=0x%02x\n", val);
-#endif
+ saved_vm_running = vm_running;
+ vm_stop(0);
- switch(s->write_cmd) {
- case 0:
- kbd_write_keyboard(s, val);
- break;
- case KBD_CCMD_WRITE_MODE:
- s->mode = val;
- kbd_update_irq(s);
- break;
- case KBD_CCMD_WRITE_OBUF:
- kbd_queue(s, val, 0);
- break;
- case KBD_CCMD_WRITE_AUX_OBUF:
- kbd_queue(s, val, 1);
- break;
- case KBD_CCMD_WRITE_OUTPORT:
-#ifdef TARGET_I386
- cpu_x86_set_a20(env, (val >> 1) & 1);
-#endif
- if (!(val & 1)) {
- reset_requested = 1;
- cpu_interrupt(global_env, CPU_INTERRUPT_EXIT);
- }
- break;
- case KBD_CCMD_WRITE_MOUSE:
- kbd_write_mouse(s, val);
- break;
- default:
- break;
+ f = fopen(filename, "wb");
+ if (!f) {
+ ret = -1;
+ goto the_end;
}
- s->write_cmd = 0;
-}
-void kbd_reset(KBDState *s)
-{
- KBDQueue *q;
- int i;
+ qemu_put_be32(f, QEMU_VM_FILE_MAGIC);
+ qemu_put_be32(f, QEMU_VM_FILE_VERSION);
+
+ for(se = first_se; se != NULL; se = se->next) {
+ /* ID string */
+ len = strlen(se->idstr);
+ qemu_put_byte(f, len);
+ qemu_put_buffer(f, se->idstr, len);
+
+ qemu_put_be32(f, se->instance_id);
+ qemu_put_be32(f, se->version_id);
+
+ /* record size: filled later */
+ len_pos = ftell(f);
+ qemu_put_be32(f, 0);
+
+ se->save_state(f, se->opaque);
- s->kbd_write_cmd = -1;
- s->mouse_write_cmd = -1;
- s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT;
- s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED;
- for(i = 0; i < 2; i++) {
- q = &s->queues[i];
- q->rptr = 0;
- q->wptr = 0;
- q->count = 0;
+ /* fill record size */
+ cur_pos = ftell(f);
+ len = ftell(f) - len_pos - 4;
+ fseek(f, len_pos, SEEK_SET);
+ qemu_put_be32(f, len);
+ fseek(f, cur_pos, SEEK_SET);
}
-}
-void kbd_init(void)
-{
- kbd_reset(&kbd_state);
-#if defined (TARGET_I386) || defined (TARGET_PPC)
- register_ioport_read(0x60, 1, kbd_read_data, 1);
- register_ioport_write(0x60, 1, kbd_write_data, 1);
- register_ioport_read(0x64, 1, kbd_read_status, 1);
- register_ioport_write(0x64, 1, kbd_write_command, 1);
-#endif
+ fclose(f);
+ ret = 0;
+ the_end:
+ if (saved_vm_running)
+ vm_start();
+ return ret;
}
-/***********************************************************/
-/* Bochs BIOS debug ports */
-#ifdef TARGET_I386
-void bochs_bios_write(CPUX86State *env, uint32_t addr, uint32_t val)
+static SaveStateEntry *find_se(const char *idstr, int instance_id)
{
- switch(addr) {
- /* Bochs BIOS messages */
- case 0x400:
- case 0x401:
- fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
- exit(1);
- case 0x402:
- case 0x403:
-#ifdef DEBUG_BIOS
- fprintf(stderr, "%c", val);
-#endif
- break;
+ SaveStateEntry *se;
- /* LGPL'ed VGA BIOS messages */
- case 0x501:
- case 0x502:
- fprintf(stderr, "VGA BIOS panic, line %d\n", val);
- exit(1);
- case 0x500:
- case 0x503:
-#ifdef DEBUG_BIOS
- fprintf(stderr, "%c", val);
-#endif
- break;
+ for(se = first_se; se != NULL; se = se->next) {
+ if (!strcmp(se->idstr, idstr) &&
+ instance_id == se->instance_id)
+ return se;
}
+ return NULL;
}
-void bochs_bios_init(void)
+int qemu_loadvm(const char *filename)
{
- register_ioport_write(0x400, 1, bochs_bios_write, 2);
- register_ioport_write(0x401, 1, bochs_bios_write, 2);
- register_ioport_write(0x402, 1, bochs_bios_write, 1);
- register_ioport_write(0x403, 1, bochs_bios_write, 1);
+ SaveStateEntry *se;
+ QEMUFile *f;
+ int len, cur_pos, ret, instance_id, record_len, version_id;
+ int saved_vm_running;
+ unsigned int v;
+ char idstr[256];
+
+ saved_vm_running = vm_running;
+ vm_stop(0);
- register_ioport_write(0x501, 1, bochs_bios_write, 2);
- register_ioport_write(0x502, 1, bochs_bios_write, 2);
- register_ioport_write(0x500, 1, bochs_bios_write, 1);
- register_ioport_write(0x503, 1, bochs_bios_write, 1);
-}
+ f = fopen(filename, "rb");
+ if (!f) {
+ ret = -1;
+ goto the_end;
+ }
+
+ v = qemu_get_be32(f);
+ if (v != QEMU_VM_FILE_MAGIC)
+ goto fail;
+ v = qemu_get_be32(f);
+ if (v != QEMU_VM_FILE_VERSION) {
+ fail:
+ fclose(f);
+ ret = -1;
+ goto the_end;
+ }
+ for(;;) {
+#if defined (DO_TB_FLUSH)
+ tb_flush(global_env);
#endif
+ len = qemu_get_byte(f);
+ if (feof(f))
+ break;
+ qemu_get_buffer(f, idstr, len);
+ idstr[len] = '\0';
+ instance_id = qemu_get_be32(f);
+ version_id = qemu_get_be32(f);
+ record_len = qemu_get_be32(f);
+#if 0
+ printf("idstr=%s instance=0x%x version=%d len=%d\n",
+ idstr, instance_id, version_id, record_len);
+#endif
+ cur_pos = ftell(f);
+ se = find_se(idstr, instance_id);
+ if (!se) {
+ fprintf(stderr, "qemu: warning: instance 0x%x of device '%s' not present in current VM\n",
+ instance_id, idstr);
+ } else {
+ ret = se->load_state(f, se->opaque, version_id);
+ if (ret < 0) {
+ fprintf(stderr, "qemu: warning: error while loading state for instance 0x%x of device '%s'\n",
+ instance_id, idstr);
+ }
+ }
+ /* always seek to exact end of record */
+ qemu_fseek(f, cur_pos + record_len, SEEK_SET);
+ }
+ fclose(f);
+ ret = 0;
+ the_end:
+ if (saved_vm_running)
+ vm_start();
+ return ret;
+}
/***********************************************************/
-/* dumb display */
+/* cpu save/restore */
-/* init terminal so that we can grab keys */
-static struct termios oldtty;
+#if defined(TARGET_I386)
-static void term_exit(void)
+static void cpu_put_seg(QEMUFile *f, SegmentCache *dt)
{
- tcsetattr (0, TCSANOW, &oldtty);
+ qemu_put_be32(f, (uint32_t)dt->base);
+ qemu_put_be32(f, dt->limit);
+ qemu_put_be32(f, dt->flags);
}
-static void term_init(void)
+static void cpu_get_seg(QEMUFile *f, SegmentCache *dt)
{
- struct termios tty;
+ dt->base = (uint8_t *)qemu_get_be32(f);
+ dt->limit = qemu_get_be32(f);
+ dt->flags = qemu_get_be32(f);
+}
- tcgetattr (0, &tty);
- oldtty = tty;
+void cpu_save(QEMUFile *f, void *opaque)
+{
+ CPUState *env = opaque;
+ uint16_t fptag, fpus, fpuc;
+ uint32_t hflags;
+ int i;
- tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP
- |INLCR|IGNCR|ICRNL|IXON);
- tty.c_oflag |= OPOST;
- tty.c_lflag &= ~(ECHO|ECHONL|ICANON|IEXTEN);
- /* if graphical mode, we allow Ctrl-C handling */
- if (nographic)
- tty.c_lflag &= ~ISIG;
- tty.c_cflag &= ~(CSIZE|PARENB);
- tty.c_cflag |= CS8;
- tty.c_cc[VMIN] = 1;
- tty.c_cc[VTIME] = 0;
+ for(i = 0; i < 8; i++)
+ qemu_put_be32s(f, &env->regs[i]);
+ qemu_put_be32s(f, &env->eip);
+ qemu_put_be32s(f, &env->eflags);
+ qemu_put_be32s(f, &env->eflags);
+ hflags = env->hflags; /* XXX: suppress most of the redundant hflags */
+ qemu_put_be32s(f, &hflags);
+
+ /* FPU */
+ fpuc = env->fpuc;
+ fpus = (env->fpus & ~0x3800) | (env->fpstt & 0x7) << 11;
+ fptag = 0;
+ for (i=7; i>=0; i--) {
+ fptag <<= 2;
+ if (env->fptags[i]) {
+ fptag |= 3;
+ }
+ }
- tcsetattr (0, TCSANOW, &tty);
-
- atexit(term_exit);
+ qemu_put_be16s(f, &fpuc);
+ qemu_put_be16s(f, &fpus);
+ qemu_put_be16s(f, &fptag);
+
+ for(i = 0; i < 8; i++) {
+ uint64_t mant;
+ uint16_t exp;
+ cpu_get_fp80(&mant, &exp, env->fpregs[i]);
+ qemu_put_be64(f, mant);
+ qemu_put_be16(f, exp);
+ }
+
+ for(i = 0; i < 6; i++)
+ cpu_put_seg(f, &env->segs[i]);
+ cpu_put_seg(f, &env->ldt);
+ cpu_put_seg(f, &env->tr);
+ cpu_put_seg(f, &env->gdt);
+ cpu_put_seg(f, &env->idt);
+
+ qemu_put_be32s(f, &env->sysenter_cs);
+ qemu_put_be32s(f, &env->sysenter_esp);
+ qemu_put_be32s(f, &env->sysenter_eip);
+
+ qemu_put_be32s(f, &env->cr[0]);
+ qemu_put_be32s(f, &env->cr[2]);
+ qemu_put_be32s(f, &env->cr[3]);
+ qemu_put_be32s(f, &env->cr[4]);
+
+ for(i = 0; i < 8; i++)
+ qemu_put_be32s(f, &env->dr[i]);
- fcntl(0, F_SETFL, O_NONBLOCK);
+ /* MMU */
+ qemu_put_be32s(f, &env->a20_mask);
}
-static void dumb_update(DisplayState *ds, int x, int y, int w, int h)
+int cpu_load(QEMUFile *f, void *opaque, int version_id)
{
-}
+ CPUState *env = opaque;
+ int i;
+ uint32_t hflags;
+ uint16_t fpus, fpuc, fptag;
+
+ if (version_id != 1)
+ return -EINVAL;
+ for(i = 0; i < 8; i++)
+ qemu_get_be32s(f, &env->regs[i]);
+ qemu_get_be32s(f, &env->eip);
+ qemu_get_be32s(f, &env->eflags);
+ qemu_get_be32s(f, &env->eflags);
+ qemu_get_be32s(f, &hflags);
+
+ qemu_get_be16s(f, &fpuc);
+ qemu_get_be16s(f, &fpus);
+ qemu_get_be16s(f, &fptag);
+
+ for(i = 0; i < 8; i++) {
+ uint64_t mant;
+ uint16_t exp;
+ mant = qemu_get_be64(f);
+ exp = qemu_get_be16(f);
+ env->fpregs[i] = cpu_set_fp80(mant, exp);
+ }
+
+ env->fpuc = fpuc;
+ env->fpstt = (fpus >> 11) & 7;
+ env->fpus = fpus & ~0x3800;
+ for(i = 0; i < 8; i++) {
+ env->fptags[i] = ((fptag & 3) == 3);
+ fptag >>= 2;
+ }
+
+ for(i = 0; i < 6; i++)
+ cpu_get_seg(f, &env->segs[i]);
+ cpu_get_seg(f, &env->ldt);
+ cpu_get_seg(f, &env->tr);
+ cpu_get_seg(f, &env->gdt);
+ cpu_get_seg(f, &env->idt);
+
+ qemu_get_be32s(f, &env->sysenter_cs);
+ qemu_get_be32s(f, &env->sysenter_esp);
+ qemu_get_be32s(f, &env->sysenter_eip);
+
+ qemu_get_be32s(f, &env->cr[0]);
+ qemu_get_be32s(f, &env->cr[2]);
+ qemu_get_be32s(f, &env->cr[3]);
+ qemu_get_be32s(f, &env->cr[4]);
+
+ for(i = 0; i < 8; i++)
+ qemu_get_be32s(f, &env->dr[i]);
-static void dumb_resize(DisplayState *ds, int w, int h)
-{
+ /* MMU */
+ qemu_get_be32s(f, &env->a20_mask);
+
+ /* XXX: compute hflags from scratch, except for CPL and IIF */
+ env->hflags = hflags;
+ tlb_flush(env, 1);
+ return 0;
}
-static void dumb_refresh(DisplayState *ds)
+#elif defined(TARGET_PPC)
+void cpu_save(QEMUFile *f, void *opaque)
{
- vga_update_display();
}
-void dumb_display_init(DisplayState *ds)
+int cpu_load(QEMUFile *f, void *opaque, int version_id)
{
- ds->data = NULL;
- ds->linesize = 0;
- ds->depth = 0;
- ds->dpy_update = dumb_update;
- ds->dpy_resize = dumb_resize;
- ds->dpy_refresh = dumb_refresh;
+ return 0;
}
+#else
+
+#warning No CPU save/restore functions
+
+#endif
-#if !defined(CONFIG_SOFTMMU)
/***********************************************************/
-/* cpu signal handler */
-static void host_segv_handler(int host_signum, siginfo_t *info,
- void *puc)
+/* ram save/restore */
+
+/* we just avoid storing empty pages */
+static void ram_put_page(QEMUFile *f, const uint8_t *buf, int len)
{
- if (cpu_signal_handler(host_signum, info, puc))
- return;
- term_exit();
- abort();
+ int i, v;
+
+ v = buf[0];
+ for(i = 1; i < len; i++) {
+ if (buf[i] != v)
+ goto normal_save;
+ }
+ qemu_put_byte(f, 1);
+ qemu_put_byte(f, v);
+ return;
+ normal_save:
+ qemu_put_byte(f, 0);
+ qemu_put_buffer(f, buf, len);
}
-#endif
-static int timer_irq_pending;
-static int timer_irq_count;
+static int ram_get_page(QEMUFile *f, uint8_t *buf, int len)
+{
+ int v;
-static int timer_ms;
-static int gui_refresh_pending, gui_refresh_count;
+ v = qemu_get_byte(f);
+ switch(v) {
+ case 0:
+ if (qemu_get_buffer(f, buf, len) != len)
+ return -EIO;
+ break;
+ case 1:
+ v = qemu_get_byte(f);
+ memset(buf, v, len);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
-static void host_alarm_handler(int host_signum, siginfo_t *info,
- void *puc)
+static void ram_save(QEMUFile *f, void *opaque)
{
- /* NOTE: since usually the OS asks a 100 Hz clock, there can be
- some drift between cpu_get_ticks() and the interrupt time. So
- we queue some interrupts to avoid missing some */
- timer_irq_count += pit_get_out_edges(&pit_channels[0]);
- if (timer_irq_count) {
- if (timer_irq_count > 2)
- timer_irq_count = 2;
- timer_irq_count--;
- timer_irq_pending = 1;
- }
- gui_refresh_count += timer_ms;
- if (gui_refresh_count >= GUI_REFRESH_INTERVAL) {
- gui_refresh_count = 0;
- gui_refresh_pending = 1;
+ int i;
+ qemu_put_be32(f, phys_ram_size);
+ for(i = 0; i < phys_ram_size; i+= TARGET_PAGE_SIZE) {
+ ram_put_page(f, phys_ram_base + i, TARGET_PAGE_SIZE);
}
+}
- /* XXX: seems dangerous to run that here. */
- DMA_run();
- SB16_run();
+static int ram_load(QEMUFile *f, void *opaque, int version_id)
+{
+ int i, ret;
- if (gui_refresh_pending || timer_irq_pending) {
- /* just exit from the cpu to have a chance to handle timers */
- cpu_interrupt(global_env, CPU_INTERRUPT_EXIT);
+ if (version_id != 1)
+ return -EINVAL;
+ if (qemu_get_be32(f) != phys_ram_size)
+ return -EINVAL;
+ for(i = 0; i < phys_ram_size; i+= TARGET_PAGE_SIZE) {
+ ret = ram_get_page(f, phys_ram_base + i, TARGET_PAGE_SIZE);
+ if (ret)
+ return ret;
}
+ return 0;
}
-#ifdef CONFIG_SOFTMMU
-void *get_mmap_addr(unsigned long size)
+/***********************************************************/
+/* main execution loop */
+
+void gui_update(void *opaque)
{
- return NULL;
+ display_state.dpy_refresh(&display_state);
+ qemu_mod_timer(gui_timer, GUI_REFRESH_INTERVAL + qemu_get_clock(rt_clock));
}
-#else
-unsigned long mmap_addr = PHYS_RAM_BASE;
-void *get_mmap_addr(unsigned long size)
+/* XXX: support several handlers */
+VMStopHandler *vm_stop_cb;
+VMStopHandler *vm_stop_opaque;
+
+int qemu_add_vm_stop_handler(VMStopHandler *cb, void *opaque)
{
- unsigned long addr;
- addr = mmap_addr;
- mmap_addr += ((size + 4095) & ~4095) + 4096;
- return (void *)addr;
+ vm_stop_cb = cb;
+ vm_stop_opaque = opaque;
+ return 0;
}
-#endif
-/* main execution loop */
+void qemu_del_vm_stop_handler(VMStopHandler *cb, void *opaque)
+{
+ vm_stop_cb = NULL;
+}
+
+void vm_start(void)
+{
+ if (!vm_running) {
+ cpu_enable_ticks();
+ vm_running = 1;
+ }
+}
-CPUState *cpu_gdbstub_get_env(void *opaque)
+void vm_stop(int reason)
{
- return global_env;
+ if (vm_running) {
+ cpu_disable_ticks();
+ vm_running = 0;
+ if (reason != 0) {
+ if (vm_stop_cb) {
+ vm_stop_cb(vm_stop_opaque, reason);
+ }
+ }
+ }
}
-int main_loop(void *opaque)
+int main_loop(void)
{
- struct pollfd ufds[3], *pf, *serial_ufd, *gdb_ufd;
-#if defined (TARGET_I386)
- struct pollfd *net_ufd;
+#ifndef _WIN32
+ struct pollfd ufds[MAX_IO_HANDLERS + 1], *pf;
+ IOHandlerRecord *ioh, *ioh_next;
+ uint8_t buf[4096];
+ int n, max_size;
#endif
- int ret, n, timeout, serial_ok;
- uint8_t ch;
+ int ret, timeout;
CPUState *env = global_env;
- if (!term_inited) {
- /* initialize terminal only there so that the user has a
- chance to stop QEMU with Ctrl-C before the gdb connection
- is launched */
- term_inited = 1;
- term_init();
- }
-
- serial_ok = 1;
- cpu_enable_ticks();
for(;;) {
-#if defined (DO_TB_FLUSH)
- tb_flush();
-#endif
- ret = cpu_exec(env);
- if (reset_requested) {
- ret = EXCP_INTERRUPT;
- break;
- }
- if (ret == EXCP_DEBUG) {
- ret = EXCP_DEBUG;
- break;
- }
- /* if hlt instruction, we wait until the next IRQ */
- if (ret == EXCP_HLT)
+ if (vm_running) {
+ ret = cpu_exec(env);
+ if (reset_requested) {
+ ret = EXCP_INTERRUPT;
+ break;
+ }
+ if (ret == EXCP_DEBUG) {
+ vm_stop(EXCP_DEBUG);
+ }
+ /* if hlt instruction, we wait until the next IRQ */
+ /* XXX: use timeout computed from timers */
+ if (ret == EXCP_HLT)
+ timeout = 10;
+ else
+ timeout = 0;
+ } else {
timeout = 10;
- else
- timeout = 0;
- /* poll any events */
- serial_ufd = NULL;
- pf = ufds;
- if (serial_ok && !(serial_ports[0].lsr & UART_LSR_DR)) {
- serial_ufd = pf;
- pf->fd = 0;
- pf->events = POLLIN;
- pf++;
- }
-#if defined (TARGET_I386)
- net_ufd = NULL;
- if (net_fd > 0 && ne2000_can_receive(&ne2000_state)) {
- net_ufd = pf;
- pf->fd = net_fd;
- pf->events = POLLIN;
- pf++;
- }
-#endif
- gdb_ufd = NULL;
- if (gdbstub_fd > 0) {
- gdb_ufd = pf;
- pf->fd = gdbstub_fd;
- pf->events = POLLIN;
- pf++;
}
- ret = poll(ufds, pf - ufds, timeout);
- if (ret > 0) {
- if (serial_ufd && (serial_ufd->revents & POLLIN)) {
- n = read(0, &ch, 1);
- if (n == 1) {
- serial_received_byte(&serial_ports[0], ch);
+#ifdef _WIN32
+ if (timeout > 0)
+ Sleep(timeout);
+#else
+
+ /* poll any events */
+ /* XXX: separate device handlers from system ones */
+ pf = ufds;
+ for(ioh = first_io_handler; ioh != NULL; ioh = ioh->next) {
+ if (!ioh->fd_can_read) {
+ max_size = 0;
+ pf->fd = ioh->fd;
+ pf->events = POLLIN;
+ ioh->ufd = pf;
+ pf++;
+ } else {
+ max_size = ioh->fd_can_read(ioh->opaque);
+ if (max_size > 0) {
+ if (max_size > sizeof(buf))
+ max_size = sizeof(buf);
+ pf->fd = ioh->fd;
+ pf->events = POLLIN;
+ ioh->ufd = pf;
+ pf++;
} else {
- /* Closed, stop polling. */
- serial_ok = 0;
+ ioh->ufd = NULL;
}
}
-#if defined (TARGET_I386)
- if (net_ufd && (net_ufd->revents & POLLIN)) {
- uint8_t buf[MAX_ETH_FRAME_SIZE];
-
- n = read(net_fd, buf, MAX_ETH_FRAME_SIZE);
- if (n > 0) {
- if (n < 60) {
- memset(buf + n, 0, 60 - n);
- n = 60;
+ ioh->max_size = max_size;
+ }
+
+ ret = poll(ufds, pf - ufds, timeout);
+ if (ret > 0) {
+ /* XXX: better handling of removal */
+ for(ioh = first_io_handler; ioh != NULL; ioh = ioh_next) {
+ ioh_next = ioh->next;
+ pf = ioh->ufd;
+ if (pf) {
+ if (pf->revents & POLLIN) {
+ if (ioh->max_size == 0) {
+ /* just a read event */
+ ioh->fd_read(ioh->opaque, NULL, 0);
+ } else {
+ n = read(ioh->fd, buf, ioh->max_size);
+ if (n >= 0) {
+ ioh->fd_read(ioh->opaque, buf, n);
+ } else if (errno != -EAGAIN) {
+ ioh->fd_read(ioh->opaque, NULL, -errno);
+ }
+ }
}
- ne2000_receive(&ne2000_state, buf, n);
- }
- }
-#endif
- if (gdb_ufd && (gdb_ufd->revents & POLLIN)) {
- uint8_t buf[1];
- /* stop emulation if requested by gdb */
- n = read(gdbstub_fd, buf, 1);
- if (n == 1) {
- ret = EXCP_INTERRUPT;
- break;
}
}
}
- /* timer IRQ */
- if (timer_irq_pending) {
-#if defined (TARGET_I386)
- pic_set_irq(0, 1);
- pic_set_irq(0, 0);
- timer_irq_pending = 0;
- /* XXX: RTC test */
- if (cmos_data[RTC_REG_B] & 0x50) {
- pic_set_irq(8, 1);
+#if defined(CONFIG_SLIRP)
+ /* XXX: merge with poll() */
+ if (slirp_inited) {
+ fd_set rfds, wfds, xfds;
+ int nfds;
+ struct timeval tv;
+
+ nfds = -1;
+ FD_ZERO(&rfds);
+ FD_ZERO(&wfds);
+ FD_ZERO(&xfds);
+ slirp_select_fill(&nfds, &rfds, &wfds, &xfds);
+ tv.tv_sec = 0;
+ tv.tv_usec = 0;
+ ret = select(nfds + 1, &rfds, &wfds, &xfds, &tv);
+ if (ret >= 0) {
+ slirp_select_poll(&rfds, &wfds, &xfds);
}
-#endif
}
+#endif
+
+#endif
- /* VGA */
- if (gui_refresh_pending) {
- display_state.dpy_refresh(&display_state);
- gui_refresh_pending = 0;
+ if (vm_running) {
+ qemu_run_timers(&active_timers[QEMU_TIMER_VIRTUAL],
+ qemu_get_clock(vm_clock));
+
+ if (audio_enabled) {
+ /* XXX: add explicit timer */
+ SB16_run();
+ }
+
+ /* run dma transfers, if any */
+ DMA_run();
}
+
+ /* real time timers */
+ qemu_run_timers(&active_timers[QEMU_TIMER_REALTIME],
+ qemu_get_clock(rt_clock));
}
cpu_disable_ticks();
return ret;
void help(void)
{
- printf("QEMU PC emulator version " QEMU_VERSION ", Copyright (c) 2003 Fabrice Bellard\n"
+ printf("QEMU PC emulator version " QEMU_VERSION ", Copyright (c) 2003-2004 Fabrice Bellard\n"
"usage: %s [options] [disk_image]\n"
"\n"
"'disk_image' is a raw hard image image for IDE hard disk 0\n"
"-fda/-fdb file use 'file' as floppy disk 0/1 image\n"
"-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n"
"-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n"
- "-cdrom file use 'file' as IDE cdrom 2 image\n"
+ "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n"
"-boot [a|b|c|d] boot on floppy (a, b), hard disk (c) or CD-ROM (d)\n"
"-snapshot write to temporary files instead of disk image files\n"
"-m megs set virtual RAM size to megs MB\n"
- "-n script set network init script [default=%s]\n"
- "-tun-fd fd this fd talks to tap/tun, use it.\n"
- "-nographic disable graphical output\n"
+ "-nographic disable graphical output and redirect serial I/Os to console\n"
+ "-enable-audio enable audio support\n"
+ "\n"
+ "Network options:\n"
+ "-nics n simulate 'n' network cards [default=1]\n"
+ "-macaddr addr set the mac address of the first interface\n"
+ "-n script set tap/tun network init script [default=%s]\n"
+ "-tun-fd fd use this fd as already opened tap/tun interface\n"
+#ifdef CONFIG_SLIRP
+ "-user-net use user mode network stack [default if no tap/tun script]\n"
+#endif
+ "-dummy-net use dummy network stack\n"
"\n"
- "Linux boot specific (does not require PC BIOS):\n"
+ "Linux boot specific:\n"
"-kernel bzImage use 'bzImage' as kernel image\n"
"-append cmdline use 'cmdline' as kernel command line\n"
"-initrd file use 'file' as initial ram disk\n"
"Debug/Expert options:\n"
"-s wait gdb connection to port %d\n"
"-p port change gdb connection port\n"
- "-d output log to %s\n"
+ "-d item1,... output log to %s (use -d ? for a list of log items)\n"
"-hdachs c,h,s force hard disk 0 geometry (usually qemu can guess it)\n"
"-L path set the directory for the BIOS and VGA BIOS\n"
+#ifdef USE_CODE_COPY
+ "-no-code-copy disable code copy acceleration\n"
+#endif
+
"\n"
"During emulation, use C-a h to get terminal commands:\n",
#ifdef CONFIG_SOFTMMU
{ "boot", 1, NULL, 0, },
{ "fda", 1, NULL, 0, },
{ "fdb", 1, NULL, 0, },
+ { "no-code-copy", 0, NULL, 0 },
+ { "nics", 1, NULL, 0 },
+ { "macaddr", 1, NULL, 0 },
+ { "user-net", 0, NULL, 0 },
+ { "dummy-net", 0, NULL, 0 },
+ { "enable-audio", 0, NULL, 0 },
{ NULL, 0, NULL, 0 },
};
-#ifdef CONFIG_SDL
-/* SDL use the pthreads and they modify sigaction. We don't
- want that. */
-#if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2)
-extern void __libc_sigaction();
-#define sigaction(sig, act, oact) __libc_sigaction(sig, act, oact)
-#else
-extern void __sigaction();
-#define sigaction(sig, act, oact) __sigaction(sig, act, oact)
+#if defined (TARGET_I386) && defined(USE_CODE_COPY)
+
+/* this stack is only used during signal handling */
+#define SIGNAL_STACK_SIZE 32768
+
+static uint8_t *signal_stack;
+
#endif
-#endif /* CONFIG_SDL */
+
+#define NET_IF_TUN 0
+#define NET_IF_USER 1
+#define NET_IF_DUMMY 2
int main(int argc, char **argv)
{
- int c, ret, initrd_size, i, use_gdbstub, gdbstub_port, long_index;
- int snapshot, linux_boot, total_ram_size;
-#if defined (TARGET_I386)
- struct linux_params *params;
+#ifdef CONFIG_GDBSTUB
+ int use_gdbstub, gdbstub_port;
#endif
- struct sigaction act;
- struct itimerval itv;
+ int c, i, long_index, has_cdrom;
+ int snapshot, linux_boot;
CPUState *env;
const char *initrd_filename;
const char *hd_filename[MAX_DISKS], *fd_filename[MAX_FD];
const char *kernel_filename, *kernel_cmdline;
DisplayState *ds = &display_state;
-
+ int cyls, heads, secs;
+ int start_emulation = 1;
+ uint8_t macaddr[6];
+ int net_if_type, nb_tun_fds, tun_fds[MAX_NICS];
+
+#if !defined(CONFIG_SOFTMMU)
/* we never want that malloc() uses mmap() */
mallopt(M_MMAP_THRESHOLD, 4096 * 1024);
+#endif
initrd_filename = NULL;
for(i = 0; i < MAX_FD; i++)
fd_filename[i] = NULL;
for(i = 0; i < MAX_DISKS; i++)
hd_filename[i] = NULL;
- phys_ram_size = 32 * 1024 * 1024;
+ ram_size = 32 * 1024 * 1024;
vga_ram_size = VGA_RAM_SIZE;
-#if defined (TARGET_I386)
pstrcpy(network_script, sizeof(network_script), DEFAULT_NETWORK_SCRIPT);
-#endif
+#ifdef CONFIG_GDBSTUB
use_gdbstub = 0;
gdbstub_port = DEFAULT_GDBSTUB_PORT;
+#endif
snapshot = 0;
nographic = 0;
kernel_filename = NULL;
kernel_cmdline = "";
+ has_cdrom = 1;
+ cyls = heads = secs = 0;
+
+ nb_tun_fds = 0;
+ net_if_type = -1;
+ nb_nics = 1;
+ /* default mac address of the first network interface */
+ macaddr[0] = 0x52;
+ macaddr[1] = 0x54;
+ macaddr[2] = 0x00;
+ macaddr[3] = 0x12;
+ macaddr[4] = 0x34;
+ macaddr[5] = 0x56;
+
+
for(;;) {
- c = getopt_long_only(argc, argv, "hm:dn:sp:L:", long_options, &long_index);
+ c = getopt_long_only(argc, argv, "hm:d:n:sp:L:S", long_options, &long_index);
if (c == -1)
break;
switch(c) {
break;
case 4:
{
- int cyls, heads, secs;
const char *p;
p = optarg;
cyls = strtol(p, (char **)&p, 0);
goto chs_fail;
p++;
secs = strtol(p, (char **)&p, 0);
- if (*p != '\0')
- goto chs_fail;
- ide_set_geometry(0, cyls, heads, secs);
- chs_fail: ;
+ if (*p != '\0') {
+ chs_fail:
+ cyls = 0;
+ }
}
break;
case 5:
case 7:
kernel_cmdline = optarg;
break;
-#if defined (TARGET_I386)
case 8:
- net_fd = atoi(optarg);
+ {
+ const char *p;
+ int fd;
+ if (nb_tun_fds < MAX_NICS) {
+ fd = strtol(optarg, (char **)&p, 0);
+ if (*p != '\0') {
+ fprintf(stderr, "qemu: invalid fd for network interface %d\n", nb_tun_fds);
+ exit(1);
+ }
+ tun_fds[nb_tun_fds++] = fd;
+ }
+ }
break;
-#endif
case 9:
hd_filename[2] = optarg;
+ has_cdrom = 0;
break;
case 10:
hd_filename[3] = optarg;
break;
case 11:
hd_filename[2] = optarg;
- ide_set_cdrom(2, 1);
+ has_cdrom = 1;
break;
case 12:
boot_device = optarg[0];
case 14:
fd_filename[1] = optarg;
break;
+ case 15:
+ code_copy_enabled = 0;
+ break;
+ case 16:
+ nb_nics = atoi(optarg);
+ if (nb_nics < 0 || nb_nics > MAX_NICS) {
+ fprintf(stderr, "qemu: invalid number of network interfaces\n");
+ exit(1);
+ }
+ break;
+ case 17:
+ {
+ const char *p;
+ int i;
+ p = optarg;
+ for(i = 0; i < 6; i++) {
+ macaddr[i] = strtol(p, (char **)&p, 16);
+ if (i == 5) {
+ if (*p != '\0')
+ goto macaddr_error;
+ } else {
+ if (*p != ':') {
+ macaddr_error:
+ fprintf(stderr, "qemu: invalid syntax for ethernet address\n");
+ exit(1);
+ }
+ p++;
+ }
+ }
+ }
+ break;
+ case 18:
+ net_if_type = NET_IF_USER;
+ break;
+ case 19:
+ net_if_type = NET_IF_DUMMY;
+ break;
+ case 20:
+ audio_enabled = 1;
+ break;
}
break;
case 'h':
help();
break;
case 'm':
- phys_ram_size = atoi(optarg) * 1024 * 1024;
- if (phys_ram_size <= 0)
+ ram_size = atoi(optarg) * 1024 * 1024;
+ if (ram_size <= 0)
help();
- if (phys_ram_size > PHYS_RAM_MAX_SIZE) {
+ if (ram_size > PHYS_RAM_MAX_SIZE) {
fprintf(stderr, "qemu: at most %d MB RAM can be simulated\n",
PHYS_RAM_MAX_SIZE / (1024 * 1024));
exit(1);
}
break;
case 'd':
- cpu_set_log(CPU_LOG_ALL);
+ {
+ int mask;
+ CPULogItem *item;
+
+ mask = cpu_str_to_log_mask(optarg);
+ if (!mask) {
+ printf("Log items (comma separated):\n");
+ for(item = cpu_log_items; item->mask != 0; item++) {
+ printf("%-10s %s\n", item->name, item->help);
+ }
+ exit(1);
+ }
+ cpu_set_log(mask);
+ }
break;
-#if defined (TARGET_I386)
case 'n':
pstrcpy(network_script, sizeof(network_script), optarg);
break;
-#endif
+#ifdef CONFIG_GDBSTUB
case 's':
use_gdbstub = 1;
break;
case 'p':
gdbstub_port = atoi(optarg);
break;
+#endif
case 'L':
bios_dir = optarg;
break;
+ case 'S':
+ start_emulation = 0;
+ break;
}
}
setvbuf(stdout, NULL, _IOLBF, 0);
#endif
- /* init network tun interface */
-#if defined (TARGET_I386)
- if (net_fd < 0)
- net_init();
+ /* init host network redirectors */
+ if (net_if_type == -1) {
+ net_if_type = NET_IF_TUN;
+#if defined(CONFIG_SLIRP)
+ if (access(network_script, R_OK) < 0) {
+ net_if_type = NET_IF_USER;
+ }
+#endif
+ }
+
+ for(i = 0; i < nb_nics; i++) {
+ NetDriverState *nd = &nd_table[i];
+ nd->index = i;
+ /* init virtual mac address */
+ nd->macaddr[0] = macaddr[0];
+ nd->macaddr[1] = macaddr[1];
+ nd->macaddr[2] = macaddr[2];
+ nd->macaddr[3] = macaddr[3];
+ nd->macaddr[4] = macaddr[4];
+ nd->macaddr[5] = macaddr[5] + i;
+ switch(net_if_type) {
+#if defined(CONFIG_SLIRP)
+ case NET_IF_USER:
+ net_slirp_init(nd);
+ break;
#endif
+#if !defined(_WIN32)
+ case NET_IF_TUN:
+ if (i < nb_tun_fds) {
+ net_fd_init(nd, tun_fds[i]);
+ } else {
+ if (net_tun_init(nd) < 0)
+ net_dummy_init(nd);
+ }
+ break;
+#endif
+ case NET_IF_DUMMY:
+ default:
+ net_dummy_init(nd);
+ break;
+ }
+ }
/* init the memory */
- total_ram_size = phys_ram_size + vga_ram_size;
+ phys_ram_size = ram_size + vga_ram_size;
#ifdef CONFIG_SOFTMMU
- phys_ram_base = malloc(total_ram_size);
+#ifdef _BSD
+ /* mallocs are always aligned on BSD. */
+ phys_ram_base = malloc(phys_ram_size);
+#else
+ phys_ram_base = memalign(TARGET_PAGE_SIZE, phys_ram_size);
+#endif
if (!phys_ram_base) {
fprintf(stderr, "Could not allocate physical memory\n");
exit(1);
phys_ram_file);
exit(1);
}
- ftruncate(phys_ram_fd, total_ram_size);
+ ftruncate(phys_ram_fd, phys_ram_size);
unlink(phys_ram_file);
- phys_ram_base = mmap(get_mmap_addr(total_ram_size),
- total_ram_size,
+ phys_ram_base = mmap(get_mmap_addr(phys_ram_size),
+ phys_ram_size,
PROT_WRITE | PROT_READ, MAP_SHARED | MAP_FIXED,
phys_ram_fd, 0);
if (phys_ram_base == MAP_FAILED) {
}
#endif
+ /* we always create the cdrom drive, even if no disk is there */
+ if (has_cdrom) {
+ bs_table[2] = bdrv_new("cdrom");
+ bdrv_set_type_hint(bs_table[2], BDRV_TYPE_CDROM);
+ }
+
/* open the virtual block devices */
for(i = 0; i < MAX_DISKS; i++) {
if (hd_filename[i]) {
- bs_table[i] = bdrv_open(hd_filename[i], snapshot);
if (!bs_table[i]) {
+ char buf[64];
+ snprintf(buf, sizeof(buf), "hd%c", i + 'a');
+ bs_table[i] = bdrv_new(buf);
+ }
+ if (bdrv_open(bs_table[i], hd_filename[i], snapshot) < 0) {
fprintf(stderr, "qemu: could not open hard disk image '%s\n",
hd_filename[i]);
exit(1);
}
+ if (i == 0 && cyls != 0)
+ bdrv_set_geometry_hint(bs_table[i], cyls, heads, secs);
}
}
- /* init CPU state */
- env = cpu_init();
- global_env = env;
- cpu_single_env = env;
-
- init_ioports();
-
- /* allocate RAM */
- cpu_register_physical_memory(0, phys_ram_size, 0);
+ /* we always create at least one floppy disk */
+ fd_table[0] = bdrv_new("fda");
+ bdrv_set_type_hint(fd_table[0], BDRV_TYPE_FLOPPY);
- if (linux_boot) {
- /* now we can load the kernel */
- ret = load_kernel(kernel_filename, phys_ram_base + KERNEL_LOAD_ADDR);
- if (ret < 0) {
- fprintf(stderr, "qemu: could not load kernel '%s'\n",
- kernel_filename);
- exit(1);
- }
-
- /* load initrd */
- initrd_size = 0;
- if (initrd_filename) {
- initrd_size = load_image(initrd_filename, phys_ram_base + INITRD_LOAD_ADDR);
- if (initrd_size < 0) {
- fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
- initrd_filename);
- exit(1);
+ for(i = 0; i < MAX_FD; i++) {
+ if (fd_filename[i]) {
+ if (!fd_table[i]) {
+ char buf[64];
+ snprintf(buf, sizeof(buf), "fd%c", i + 'a');
+ fd_table[i] = bdrv_new(buf);
+ bdrv_set_type_hint(fd_table[i], BDRV_TYPE_FLOPPY);
+ }
+ if (fd_filename[i] != '\0') {
+ if (bdrv_open(fd_table[i], fd_filename[i], snapshot) < 0) {
+ fprintf(stderr, "qemu: could not open floppy disk image '%s'\n",
+ fd_filename[i]);
+ exit(1);
+ }
}
}
-
- /* init kernel params */
-#ifdef TARGET_I386
- params = (void *)(phys_ram_base + KERNEL_PARAMS_ADDR);
- memset(params, 0, sizeof(struct linux_params));
- params->mount_root_rdonly = 0;
- stw_raw(¶ms->cl_magic, 0xA33F);
- stw_raw(¶ms->cl_offset, params->commandline - (uint8_t *)params);
- stl_raw(¶ms->alt_mem_k, (phys_ram_size / 1024) - 1024);
- pstrcat(params->commandline, sizeof(params->commandline), kernel_cmdline);
- params->loader_type = 0x01;
- if (initrd_size > 0) {
- stl_raw(¶ms->initrd_start, INITRD_LOAD_ADDR);
- stl_raw(¶ms->initrd_size, initrd_size);
- }
- params->orig_video_lines = 25;
- params->orig_video_cols = 80;
-
- /* setup basic memory access */
- env->cr[0] = 0x00000033;
- env->hflags |= HF_PE_MASK;
- cpu_x86_init_mmu(env);
-
- memset(params->idt_table, 0, sizeof(params->idt_table));
-
- stq_raw(¶ms->gdt_table[2], 0x00cf9a000000ffffLL); /* KERNEL_CS */
- stq_raw(¶ms->gdt_table[3], 0x00cf92000000ffffLL); /* KERNEL_DS */
- /* for newer kernels (2.6.0) CS/DS are at different addresses */
- stq_raw(¶ms->gdt_table[12], 0x00cf9a000000ffffLL); /* KERNEL_CS */
- stq_raw(¶ms->gdt_table[13], 0x00cf92000000ffffLL); /* KERNEL_DS */
-
- env->idt.base = (void *)((uint8_t *)params->idt_table - phys_ram_base);
- env->idt.limit = sizeof(params->idt_table) - 1;
- env->gdt.base = (void *)((uint8_t *)params->gdt_table - phys_ram_base);
- env->gdt.limit = sizeof(params->gdt_table) - 1;
-
- cpu_x86_load_seg_cache(env, R_CS, KERNEL_CS, NULL, 0xffffffff, 0x00cf9a00);
- cpu_x86_load_seg_cache(env, R_DS, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200);
- cpu_x86_load_seg_cache(env, R_ES, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200);
- cpu_x86_load_seg_cache(env, R_SS, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200);
- cpu_x86_load_seg_cache(env, R_FS, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200);
- cpu_x86_load_seg_cache(env, R_GS, KERNEL_DS, NULL, 0xffffffff, 0x00cf9200);
-
- env->eip = KERNEL_LOAD_ADDR;
- env->regs[R_ESI] = KERNEL_PARAMS_ADDR;
- env->eflags = 0x2;
-#elif defined (TARGET_PPC)
- cpu_x86_init_mmu(env);
- PPC_init_hw(env, phys_ram_size, KERNEL_LOAD_ADDR, ret,
- KERNEL_STACK_ADDR, boot_device);
-#endif
- } else {
- char buf[1024];
+ }
- /* RAW PC boot */
-#if defined(TARGET_I386)
- /* BIOS load */
- snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME);
- ret = load_image(buf, phys_ram_base + 0x000f0000);
- if (ret != 0x10000) {
- fprintf(stderr, "qemu: could not load PC bios '%s'\n", buf);
- exit(1);
- }
+ /* init CPU state */
+ env = cpu_init();
+ global_env = env;
+ cpu_single_env = env;
- /* VGA BIOS load */
- snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
- ret = load_image(buf, phys_ram_base + 0x000c0000);
+ register_savevm("timer", 0, 1, timer_save, timer_load, env);
+ register_savevm("cpu", 0, 1, cpu_save, cpu_load, env);
+ register_savevm("ram", 0, 1, ram_save, ram_load, NULL);
- /* setup basic memory access */
- env->cr[0] = 0x60000010;
- cpu_x86_init_mmu(env);
-
- cpu_register_physical_memory(0xc0000, 0x10000, 0xc0000 | IO_MEM_ROM);
- cpu_register_physical_memory(0xf0000, 0x10000, 0xf0000 | IO_MEM_ROM);
-
- env->idt.limit = 0xffff;
- env->gdt.limit = 0xffff;
- env->ldt.limit = 0xffff;
- env->ldt.flags = DESC_P_MASK;
- env->tr.limit = 0xffff;
- env->tr.flags = DESC_P_MASK;
-
- /* not correct (CS base=0xffff0000) */
- cpu_x86_load_seg_cache(env, R_CS, 0xf000, (uint8_t *)0x000f0000, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_DS, 0, NULL, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_ES, 0, NULL, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_SS, 0, NULL, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_FS, 0, NULL, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_GS, 0, NULL, 0xffff, 0);
-
- env->eip = 0xfff0;
- env->regs[R_EDX] = 0x600; /* indicate P6 processor */
-
- env->eflags = 0x2;
-
- bochs_bios_init();
-#elif defined(TARGET_PPC)
- cpu_x86_init_mmu(env);
- /* allocate ROM */
- // snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME);
- snprintf(buf, sizeof(buf), "%s", BIOS_FILENAME);
- printf("load BIOS at %p\n", phys_ram_base + 0x000f0000);
- ret = load_image(buf, phys_ram_base + 0x000f0000);
- if (ret != 0x10000) {
- fprintf(stderr, "qemu: could not load PPC bios '%s' (%d)\n%m\n",
- buf, ret);
- exit(1);
- }
-#endif
- }
+ init_ioports();
+ cpu_calibrate_ticks();
/* terminal init */
if (nographic) {
dumb_display_init(ds);
#endif
}
- /* init basic PC hardware */
- register_ioport_write(0x80, 1, ioport80_write, 1);
- vga_initialize(ds, phys_ram_base + phys_ram_size, phys_ram_size,
- vga_ram_size);
-#if defined (TARGET_I386)
- cmos_init();
+ /* setup cpu signal handlers for MMU / self modifying code handling */
+#if !defined(CONFIG_SOFTMMU)
+
+#if defined (TARGET_I386) && defined(USE_CODE_COPY)
+ {
+ stack_t stk;
+ signal_stack = memalign(16, SIGNAL_STACK_SIZE);
+ stk.ss_sp = signal_stack;
+ stk.ss_size = SIGNAL_STACK_SIZE;
+ stk.ss_flags = 0;
+
+ if (sigaltstack(&stk, NULL) < 0) {
+ perror("sigaltstack");
+ exit(1);
+ }
+ }
+#endif
+ {
+ struct sigaction act;
+
+ sigfillset(&act.sa_mask);
+ act.sa_flags = SA_SIGINFO;
+#if defined (TARGET_I386) && defined(USE_CODE_COPY)
+ act.sa_flags |= SA_ONSTACK;
#endif
- pic_init();
- pit_init();
- serial_init();
-#if defined (TARGET_I386)
- ne2000_init();
+ act.sa_sigaction = host_segv_handler;
+ sigaction(SIGSEGV, &act, NULL);
+ sigaction(SIGBUS, &act, NULL);
+#if defined (TARGET_I386) && defined(USE_CODE_COPY)
+ sigaction(SIGFPE, &act, NULL);
#endif
- ide_init();
- kbd_init();
- AUD_init();
- DMA_init();
-#if defined (TARGET_I386)
- SB16_init();
+ }
#endif
-#if defined (TARGET_PPC)
- PPC_end_init();
+
+#ifndef _WIN32
+ {
+ struct sigaction act;
+ sigfillset(&act.sa_mask);
+ act.sa_flags = 0;
+ act.sa_handler = SIG_IGN;
+ sigaction(SIGPIPE, &act, NULL);
+ }
#endif
- fdctrl_register((unsigned char **)fd_filename, snapshot, boot_device);
- /* setup cpu signal handlers for MMU / self modifying code handling */
- sigfillset(&act.sa_mask);
- act.sa_flags = SA_SIGINFO;
-#if !defined(CONFIG_SOFTMMU)
- act.sa_sigaction = host_segv_handler;
- sigaction(SIGSEGV, &act, NULL);
- sigaction(SIGBUS, &act, NULL);
+ init_timers();
+
+#if defined(TARGET_I386)
+ pc_init(ram_size, vga_ram_size, boot_device,
+ ds, fd_filename, snapshot,
+ kernel_filename, kernel_cmdline, initrd_filename);
+#elif defined(TARGET_PPC)
+ ppc_init(ram_size, vga_ram_size, boot_device,
+ ds, fd_filename, snapshot,
+ kernel_filename, kernel_cmdline, initrd_filename);
#endif
- act.sa_sigaction = host_alarm_handler;
- sigaction(SIGALRM, &act, NULL);
-
- itv.it_interval.tv_sec = 0;
- itv.it_interval.tv_usec = 1000;
- itv.it_value.tv_sec = 0;
- itv.it_value.tv_usec = 10 * 1000;
- setitimer(ITIMER_REAL, &itv, NULL);
- /* we probe the tick duration of the kernel to inform the user if
- the emulated kernel requested a too high timer frequency */
- getitimer(ITIMER_REAL, &itv);
- timer_ms = itv.it_interval.tv_usec / 1000;
- pit_min_timer_count = ((uint64_t)itv.it_interval.tv_usec * PIT_FREQ) /
- 1000000;
+ /* launched after the device init so that it can display or not a
+ banner */
+ monitor_init();
+
+ gui_timer = qemu_new_timer(rt_clock, gui_update, NULL);
+ qemu_mod_timer(gui_timer, qemu_get_clock(rt_clock));
+#ifdef CONFIG_GDBSTUB
if (use_gdbstub) {
- cpu_gdbstub(NULL, main_loop, gdbstub_port);
- } else {
- main_loop(NULL);
+ if (gdbserver_start(gdbstub_port) < 0) {
+ fprintf(stderr, "Could not open gdbserver socket on port %d\n",
+ gdbstub_port);
+ exit(1);
+ } else {
+ printf("Waiting gdb connection on port %d\n", gdbstub_port);
+ }
+ } else
+#endif
+ if (start_emulation)
+ {
+ vm_start();
}
+ term_init();
+ main_loop();
+ quit_timers();
return 0;
}
projects / qemu.git / blobdiff