@item MusicPal (MV88W8618 ARM processor)
@item Gumstix "Connex" and "Verdex" motherboards (PXA255/270).
@item Siemens SX1 smartphone (OMAP310 processor)
-@item Syborg SVP base model (ARM Cortex-A8).
@item AXIS-Devboard88 (CRISv32 ETRAX-FS).
@item Petalogix Spartan 3aDSP1800 MMU ref design (MicroBlaze).
@item Avnet LX60/LX110/LX200 boards (Xtensa)
QEMU uses GUS emulation (GUSEMU32 @url{http://www.deinmeister.de/gusemu/})
by Tibor "TS" Schütz.
-Not that, by default, GUS shares IRQ(7) with parallel ports and so
+Note that, by default, GUS shares IRQ(7) with parallel ports and so
qemu must be told to not have parallel ports to have working GUS
@example
* disk_images_fat_images:: Virtual FAT disk images
* disk_images_nbd:: NBD access
* disk_images_sheepdog:: Sheepdog disk images
+* disk_images_iscsi:: iSCSI LUNs
@end menu
@node disk_images_quickstart
qemu sheepdog:@var{hostname}:@var{port}:@var{image}
@end example
+@node disk_images_iscsi
+@subsection iSCSI LUNs
+
+iSCSI is a popular protocol used to access SCSI devices across a computer
+network.
+
+There are two different ways iSCSI devices can be used by QEMU.
+
+The first method is to mount the iSCSI LUN on the host, and make it appear as
+any other ordinary SCSI device on the host and then to access this device as a
+/dev/sd device from QEMU. How to do this differs between host OSes.
+
+The second method involves using the iSCSI initiator that is built into
+QEMU. This provides a mechanism that works the same way regardless of which
+host OS you are running QEMU on. This section will describe this second method
+of using iSCSI together with QEMU.
+
+In QEMU, iSCSI devices are described using special iSCSI URLs
+
+@example
+URL syntax:
+iscsi://[<username>[%<password>]@@]<host>[:<port>]/<target-iqn-name>/<lun>
+@end example
+
+Username and password are optional and only used if your target is set up
+using CHAP authentication for access control.
+Alternatively the username and password can also be set via environment
+variables to have these not show up in the process list
+
+@example
+export LIBISCSI_CHAP_USERNAME=<username>
+export LIBISCSI_CHAP_PASSWORD=<password>
+iscsi://<host>/<target-iqn-name>/<lun>
+@end example
+
+Various session related parameters can be set via special options, either
+in a configuration file provided via '-readconfig' or directly on the
+command line.
+
+@example
+Setting a specific initiator name to use when logging in to the target
+-iscsi initiator-name=iqn.qemu.test:my-initiator
+@end example
+
+@example
+Controlling which type of header digest to negotiate with the target
+-iscsi header-digest=CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
+@end example
+
+These can also be set via a configuration file
+@example
+[iscsi]
+ user = "CHAP username"
+ password = "CHAP password"
+ initiator-name = "iqn.qemu.test:my-initiator"
+ # header digest is one of CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
+ header-digest = "CRC32C"
+@end example
+
+
+Setting the target name allows different options for different targets
+@example
+[iscsi "iqn.target.name"]
+ user = "CHAP username"
+ password = "CHAP password"
+ initiator-name = "iqn.qemu.test:my-initiator"
+ # header digest is one of CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
+ header-digest = "CRC32C"
+@end example
+
+
+Howto use a configuration file to set iSCSI configuration options:
+@example
+cat >iscsi.conf <<EOF
+[iscsi]
+ user = "me"
+ password = "my password"
+ initiator-name = "iqn.qemu.test:my-initiator"
+ header-digest = "CRC32C"
+EOF
+
+qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \
+ -readconfig iscsi.conf
+@end example
+
+
+Howto set up a simple iSCSI target on loopback and accessing it via QEMU:
+@example
+This example shows how to set up an iSCSI target with one CDROM and one DISK
+using the Linux STGT software target. This target is available on Red Hat based
+systems as the package 'scsi-target-utils'.
+
+tgtd --iscsi portal=127.0.0.1:3260
+tgtadm --lld iscsi --op new --mode target --tid 1 -T iqn.qemu.test
+tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 1 \
+ -b /IMAGES/disk.img --device-type=disk
+tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 2 \
+ -b /IMAGES/cd.iso --device-type=cd
+tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL
+
+qemu-system-i386 -iscsi initiator-name=iqn.qemu.test:my-initiator \
+ -boot d -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \
+ -cdrom iscsi://127.0.0.1/iqn.qemu.test/2
+@end example
+
+
+
@node pcsys_network
@section Network emulation
IDE controller
@end itemize
-The mipssim pseudo board emulation provides an environment similiar
+The mipssim pseudo board emulation provides an environment similar
to what the proprietary MIPS emulator uses for running Linux.
It supports:
Three on-chip UARTs
@end itemize
-The "Syborg" Symbian Virtual Platform base model includes the following
-elements:
-
-@itemize @minus
-@item
-ARM Cortex-A8 CPU
-@item
-Interrupt controller
-@item
-Timer
-@item
-Real Time Clock
-@item
-Keyboard
-@item
-Framebuffer
-@item
-Touchscreen
-@item
-UARTs
-@end itemize
-
A Linux 2.6 test image is available on the QEMU web site. More
information is available in the QEMU mailing-list archive.
Avnet LX60/LX110/LX200 board
@end itemize
-The sim pseudo board emulation provides an environment similiar
+The sim pseudo board emulation provides an environment similar
to one provided by the proprietary Tensilica ISS.
It supports:
projects / qemu.git / blobdiff