#include "qemu-common.h"
#include "qemu-error.h"
#include "trace.h"
+#include "hw/block-common.h"
#include "blockdev.h"
#include "virtio-blk.h"
+#include "scsi-defs.h"
#ifdef __linux__
# include <scsi/sg.h>
#endif
void *rq;
QEMUBH *bh;
BlockConf *conf;
- char *serial;
+ VirtIOBlkConf *blk;
unsigned short sector_mask;
DeviceState *qdev;
} VirtIOBlock;
VirtIOBlock *s = req->dev;
if (action == BLOCK_ERR_IGNORE) {
- bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
+ bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_IGNORE, is_read);
return 0;
}
|| action == BLOCK_ERR_STOP_ANY) {
req->next = s->rq;
s->rq = req;
- bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
- vm_stop(RSTATE_IO_ERROR);
+ bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_STOP, is_read);
+ vm_stop(RUN_STATE_IO_ERROR);
+ bdrv_iostatus_set_err(s->bs, error);
} else {
virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
bdrv_acct_done(s->bs, &req->acct);
g_free(req);
- bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
+ bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_REPORT, is_read);
}
return 1;
return req;
}
-#ifdef __linux__
static void virtio_blk_handle_scsi(VirtIOBlockReq *req)
{
- struct sg_io_hdr hdr;
+#ifdef __linux__
int ret;
- int status;
int i;
+#endif
+ int status = VIRTIO_BLK_S_OK;
/*
* We require at least one output segment each for the virtio_blk_outhdr
}
/*
- * No support for bidirection commands yet.
+ * The scsi inhdr is placed in the second-to-last input segment, just
+ * before the regular inhdr.
*/
- if (req->elem.out_num > 2 && req->elem.in_num > 3) {
- virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP);
- g_free(req);
- return;
+ req->scsi = (void *)req->elem.in_sg[req->elem.in_num - 2].iov_base;
+
+ if (!req->dev->blk->scsi) {
+ status = VIRTIO_BLK_S_UNSUPP;
+ goto fail;
}
/*
- * The scsi inhdr is placed in the second-to-last input segment, just
- * before the regular inhdr.
+ * No support for bidirection commands yet.
*/
- req->scsi = (void *)req->elem.in_sg[req->elem.in_num - 2].iov_base;
+ if (req->elem.out_num > 2 && req->elem.in_num > 3) {
+ status = VIRTIO_BLK_S_UNSUPP;
+ goto fail;
+ }
+#ifdef __linux__
+ struct sg_io_hdr hdr;
memset(&hdr, 0, sizeof(struct sg_io_hdr));
hdr.interface_id = 'S';
hdr.cmd_len = req->elem.out_sg[1].iov_len;
ret = bdrv_ioctl(req->dev->bs, SG_IO, &hdr);
if (ret) {
status = VIRTIO_BLK_S_UNSUPP;
- hdr.status = ret;
- hdr.resid = hdr.dxfer_len;
- } else if (hdr.status) {
- status = VIRTIO_BLK_S_IOERR;
- } else {
- status = VIRTIO_BLK_S_OK;
+ goto fail;
}
- stl_p(&req->scsi->errors, hdr.status);
+ /*
+ * From SCSI-Generic-HOWTO: "Some lower level drivers (e.g. ide-scsi)
+ * clear the masked_status field [hence status gets cleared too, see
+ * block/scsi_ioctl.c] even when a CHECK_CONDITION or COMMAND_TERMINATED
+ * status has occurred. However they do set DRIVER_SENSE in driver_status
+ * field. Also a (sb_len_wr > 0) indicates there is a sense buffer.
+ */
+ if (hdr.status == 0 && hdr.sb_len_wr > 0) {
+ hdr.status = CHECK_CONDITION;
+ }
+
+ stl_p(&req->scsi->errors,
+ hdr.status | (hdr.msg_status << 8) |
+ (hdr.host_status << 16) | (hdr.driver_status << 24));
stl_p(&req->scsi->residual, hdr.resid);
stl_p(&req->scsi->sense_len, hdr.sb_len_wr);
stl_p(&req->scsi->data_len, hdr.dxfer_len);
virtio_blk_req_complete(req, status);
g_free(req);
-}
#else
-static void virtio_blk_handle_scsi(VirtIOBlockReq *req)
-{
- virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP);
+ abort();
+#endif
+
+fail:
+ /* Just put anything nonzero so that the ioctl fails in the guest. */
+ stl_p(&req->scsi->errors, 255);
+ virtio_blk_req_complete(req, status);
g_free(req);
}
-#endif /* __linux__ */
typedef struct MultiReqBuffer {
BlockRequest blkreq[32];
static void virtio_blk_handle_flush(VirtIOBlockReq *req, MultiReqBuffer *mrb)
{
- BlockDriverAIOCB *acb;
-
bdrv_acct_start(req->dev->bs, &req->acct, 0, BDRV_ACCT_FLUSH);
/*
* Make sure all outstanding writes are posted to the backing device.
*/
virtio_submit_multiwrite(req->dev->bs, mrb);
-
- acb = bdrv_aio_flush(req->dev->bs, virtio_blk_flush_complete, req);
- if (!acb) {
- virtio_blk_flush_complete(req, -EIO);
- }
+ bdrv_aio_flush(req->dev->bs, virtio_blk_flush_complete, req);
}
static void virtio_blk_handle_write(VirtIOBlockReq *req, MultiReqBuffer *mrb)
static void virtio_blk_handle_read(VirtIOBlockReq *req)
{
- BlockDriverAIOCB *acb;
uint64_t sector;
sector = ldq_p(&req->out->sector);
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_READ);
+ trace_virtio_blk_handle_read(req, sector, req->qiov.size / 512);
+
if (sector & req->dev->sector_mask) {
virtio_blk_rw_complete(req, -EIO);
return;
virtio_blk_rw_complete(req, -EIO);
return;
}
-
- acb = bdrv_aio_readv(req->dev->bs, sector, &req->qiov,
- req->qiov.size / BDRV_SECTOR_SIZE,
- virtio_blk_rw_complete, req);
- if (!acb) {
- virtio_blk_rw_complete(req, -EIO);
- }
+ bdrv_aio_readv(req->dev->bs, sector, &req->qiov,
+ req->qiov.size / BDRV_SECTOR_SIZE,
+ virtio_blk_rw_complete, req);
}
static void virtio_blk_handle_request(VirtIOBlockReq *req,
* terminated by '\0' only when shorter than buffer.
*/
strncpy(req->elem.in_sg[0].iov_base,
- s->serial ? s->serial : "",
+ s->blk->serial ? s->blk->serial : "",
MIN(req->elem.in_sg[0].iov_len, VIRTIO_BLK_ID_BYTES));
virtio_blk_req_complete(req, VIRTIO_BLK_S_OK);
g_free(req);
* This should cancel pending requests, but can't do nicely until there
* are per-device request lists.
*/
- qemu_aio_flush();
+ bdrv_drain_all();
}
/* coalesce internal state, copy to pci i/o region 0
VirtIOBlock *s = to_virtio_blk(vdev);
struct virtio_blk_config blkcfg;
uint64_t capacity;
- int cylinders, heads, secs;
+ int blk_size = s->conf->logical_block_size;
bdrv_get_geometry(s->bs, &capacity);
- bdrv_get_geometry_hint(s->bs, &cylinders, &heads, &secs);
memset(&blkcfg, 0, sizeof(blkcfg));
stq_raw(&blkcfg.capacity, capacity);
stl_raw(&blkcfg.seg_max, 128 - 2);
- stw_raw(&blkcfg.cylinders, cylinders);
- blkcfg.heads = heads;
- blkcfg.sectors = secs & ~s->sector_mask;
- blkcfg.blk_size = s->conf->logical_block_size;
+ stw_raw(&blkcfg.cylinders, s->conf->cyls);
+ stl_raw(&blkcfg.blk_size, blk_size);
+ stw_raw(&blkcfg.min_io_size, s->conf->min_io_size / blk_size);
+ stw_raw(&blkcfg.opt_io_size, s->conf->opt_io_size / blk_size);
+ blkcfg.heads = s->conf->heads;
+ /*
+ * We must ensure that the block device capacity is a multiple of
+ * the logical block size. If that is not the case, lets use
+ * sector_mask to adopt the geometry to have a correct picture.
+ * For those devices where the capacity is ok for the given geometry
+ * we dont touch the sector value of the geometry, since some devices
+ * (like s390 dasd) need a specific value. Here the capacity is already
+ * cyls*heads*secs*blk_size and the sector value is not block size
+ * divided by 512 - instead it is the amount of blk_size blocks
+ * per track (cylinder).
+ */
+ if (bdrv_getlength(s->bs) / s->conf->heads / s->conf->secs % blk_size) {
+ blkcfg.sectors = s->conf->secs & ~s->sector_mask;
+ } else {
+ blkcfg.sectors = s->conf->secs;
+ }
blkcfg.size_max = 0;
blkcfg.physical_block_exp = get_physical_block_exp(s->conf);
blkcfg.alignment_offset = 0;
- blkcfg.min_io_size = s->conf->min_io_size / blkcfg.blk_size;
- blkcfg.opt_io_size = s->conf->opt_io_size / blkcfg.blk_size;
memcpy(config, &blkcfg, sizeof(struct virtio_blk_config));
}
features |= (1 << VIRTIO_BLK_F_GEOMETRY);
features |= (1 << VIRTIO_BLK_F_TOPOLOGY);
features |= (1 << VIRTIO_BLK_F_BLK_SIZE);
+ features |= (1 << VIRTIO_BLK_F_SCSI);
if (bdrv_enable_write_cache(s->bs))
features |= (1 << VIRTIO_BLK_F_WCACHE);
static int virtio_blk_load(QEMUFile *f, void *opaque, int version_id)
{
VirtIOBlock *s = opaque;
+ int ret;
if (version_id != 2)
return -EINVAL;
- virtio_load(&s->vdev, f);
+ ret = virtio_load(&s->vdev, f);
+ if (ret) {
+ return ret;
+ }
+
while (qemu_get_sbyte(f)) {
VirtIOBlockReq *req = virtio_blk_alloc_request(s);
qemu_get_buffer(f, (unsigned char*)&req->elem, sizeof(req->elem));
.resize_cb = virtio_blk_resize,
};
-VirtIODevice *virtio_blk_init(DeviceState *dev, BlockConf *conf,
- char **serial)
+VirtIODevice *virtio_blk_init(DeviceState *dev, VirtIOBlkConf *blk)
{
VirtIOBlock *s;
- int cylinders, heads, secs;
static int virtio_blk_id;
DriveInfo *dinfo;
- if (!conf->bs) {
- error_report("virtio-blk-pci: drive property not set");
+ if (!blk->conf.bs) {
+ error_report("drive property not set");
return NULL;
}
- if (!bdrv_is_inserted(conf->bs)) {
+ if (!bdrv_is_inserted(blk->conf.bs)) {
error_report("Device needs media, but drive is empty");
return NULL;
}
- if (!*serial) {
+ if (!blk->serial) {
/* try to fall back to value set with legacy -drive serial=... */
- dinfo = drive_get_by_blockdev(conf->bs);
+ dinfo = drive_get_by_blockdev(blk->conf.bs);
if (*dinfo->serial) {
- *serial = strdup(dinfo->serial);
+ blk->serial = strdup(dinfo->serial);
}
}
s->vdev.get_config = virtio_blk_update_config;
s->vdev.get_features = virtio_blk_get_features;
s->vdev.reset = virtio_blk_reset;
- s->bs = conf->bs;
- s->conf = conf;
- s->serial = *serial;
+ s->bs = blk->conf.bs;
+ s->conf = &blk->conf;
+ s->blk = blk;
s->rq = NULL;
s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
- bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs);
+
+ if (!blk->conf.cyls && !blk->conf.heads && !blk->conf.secs) {
+ /* try to fall back to value set with legacy -drive cyls=... */
+ dinfo = drive_get_by_blockdev(blk->conf.bs);
+ blk->conf.cyls = dinfo->cyls;
+ blk->conf.heads = dinfo->heads;
+ blk->conf.secs = dinfo->secs;
+ }
+ if (!blk->conf.cyls && !blk->conf.heads && !blk->conf.secs) {
+ hd_geometry_guess(s->bs,
+ &blk->conf.cyls, &blk->conf.heads, &blk->conf.secs,
+ NULL);
+ }
+ if (blk->conf.cyls || blk->conf.heads || blk->conf.secs) {
+ if (blk->conf.cyls < 1 || blk->conf.cyls > 65535) {
+ error_report("cyls must be between 1 and 65535");
+ return NULL;
+ }
+ if (blk->conf.heads < 1 || blk->conf.heads > 255) {
+ error_report("heads must be between 1 and 255");
+ return NULL;
+ }
+ if (blk->conf.secs < 1 || blk->conf.secs > 255) {
+ error_report("secs must be between 1 and 255");
+ return NULL;
+ }
+ }
s->vq = virtio_add_queue(&s->vdev, 128, virtio_blk_handle_output);
register_savevm(dev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
bdrv_set_dev_ops(s->bs, &virtio_block_ops, s);
- bdrv_set_buffer_alignment(s->bs, conf->logical_block_size);
+ bdrv_set_buffer_alignment(s->bs, s->conf->logical_block_size);
- add_boot_device_path(conf->bootindex, dev, "/disk@0,0");
+ bdrv_iostatus_enable(s->bs);
+ add_boot_device_path(s->conf->bootindex, dev, "/disk@0,0");
return &s->vdev;
}
{
VirtIOBlock *s = to_virtio_blk(vdev);
unregister_savevm(s->qdev, "virtio-blk", s);
+ blockdev_mark_auto_del(s->bs);
virtio_cleanup(vdev);
}
projects / qemu.git / blobdiff