pc: acpi: SRAT: create only valid processor lapic entries

[qemu.git] / qemu-doc.texi

diff --git a/qemu-doc.texi b/qemu-doc.texi
index ffc3e50abbe09d9edf011d619c792224084f0c09..bc9dd13cc913d2a8d2192a157fc8a911b14598ce 100644 (file)
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -158,7 +158,8 @@ TODO (no longer available)
 * pcsys_introduction:: Introduction
 * pcsys_quickstart::   Quick Start
 * sec_invocation::     Invocation
-* pcsys_keys::         Keys
+* pcsys_keys::         Keys in the graphical frontends
+* mux_keys::           Keys in the character backend multiplexer
 * pcsys_monitor::      QEMU Monitor
 * disk_images::        Disk Images
 * pcsys_network::      Network emulation
@@ -195,6 +196,8 @@ PCI and ISA network adapters
 @item
 Serial ports
 @item
+IPMI BMC, either and internal or external one
+@item
 Creative SoundBlaster 16 sound card
 @item
 ENSONIQ AudioPCI ES1370 sound card
@@ -257,7 +260,7 @@ Linux should boot and give you a prompt.
 
 @example
 @c man begin SYNOPSIS
-usage: qemu-system-i386 [options] [@var{disk_image}]
+@command{qemu-system-i386} [@var{options}] [@var{disk_image}]
 @c man end
 @end example
 
@@ -270,7 +273,7 @@ targets do not need a disk image.
 @c man end
 
 @node pcsys_keys
-@section Keys
+@section Keys in the graphical frontends
 
 @c man begin OPTIONS
 
@@ -320,15 +323,23 @@ Toggle mouse and keyboard grab.
 In the virtual consoles, you can use @key{Ctrl-Up}, @key{Ctrl-Down},
 @key{Ctrl-PageUp} and @key{Ctrl-PageDown} to move in the back log.
 
-@kindex Ctrl-a h
-During emulation, if you are using the @option{-nographic} option, use
-@key{Ctrl-a h} to get terminal commands:
+@c man end
+
+@node mux_keys
+@section Keys in the character backend multiplexer
+
+@c man begin OPTIONS
+
+During emulation, if you are using a character backend multiplexer
+(which is the default if you are using @option{-nographic}) then
+several commands are available via an escape sequence. These
+key sequences all start with an escape character, which is @key{Ctrl-a}
+by default, but can be changed with @option{-echr}. The list below assumes
+you're using the default.
 
 @table @key
 @item Ctrl-a h
 @kindex Ctrl-a h
-@item Ctrl-a ?
-@kindex Ctrl-a ?
 Print this help
 @item Ctrl-a x
 @kindex Ctrl-a x
@@ -344,10 +355,11 @@ Toggle console timestamps
 Send break (magic sysrq in Linux)
 @item Ctrl-a c
 @kindex Ctrl-a c
-Switch between console and monitor
+Rotate between the frontends connected to the multiplexer (usually
+this switches between the monitor and the console)
 @item Ctrl-a Ctrl-a
-@kindex Ctrl-a a
-Send Ctrl-a
+@kindex Ctrl-a Ctrl-a
+Send the escape character to the frontend
 @end table
 @c man end
 
@@ -1235,9 +1247,9 @@ echo 100 100 > /proc/sys/net/ipv4/ping_group_range
 When using the built-in TFTP server, the router is also the TFTP
 server.
 
-When using the @option{-redir} option, TCP or UDP connections can be
-redirected from the host to the guest. It allows for example to
-redirect X11, telnet or SSH connections.
+When using the @option{'-netdev user,hostfwd=...'} option, TCP or UDP
+connections can be redirected from the host to the guest. It allows for
+example to redirect X11, telnet or SSH connections.
 
 @subsection Connecting VLANs between QEMU instances
 
@@ -1404,7 +1416,7 @@ no type is given, the HCI logic corresponds to @code{-bt hci,vlan=0}.
 This USB device implements the USB Transport Layer of HCI.  Example
 usage:
 @example
-qemu-system-i386 [...OPTIONS...] -usbdevice bt:hci,vlan=3 -bt device:keyboard,vlan=3
+@command{qemu-system-i386} [...@var{OPTIONS}...] @option{-usbdevice} bt:hci,vlan=3 @option{-bt} device:keyboard,vlan=3
 @end example
 @end table
 
@@ -1887,7 +1899,8 @@ correctly instructs QEMU to shutdown at the appropriate moment.
 
 @subsubsection Share a directory between Unix and Windows
 
-See @ref{sec_invocation} about the help of the option @option{-smb}.
+See @ref{sec_invocation} about the help of the option
+@option{'-netdev user,smb=...'}.
 
 @subsubsection Windows XP security problem
 
@@ -2753,7 +2766,7 @@ qemu-i386 /usr/local/qemu-i386/wine/bin/wine \
 @subsection Command line options
 
 @example
-usage: qemu-i386 [-h] [-d] [-L path] [-s size] [-cpu model] [-g port] [-B offset] [-R size] program [arguments...]
+@command{qemu-i386} [@option{-h]} [@option{-d]} [@option{-L} @var{path}] [@option{-s} @var{size}] [@option{-cpu} @var{model}] [@option{-g} @var{port}] [@option{-B} @var{offset}] [@option{-R} @var{size}] @var{program} [@var{arguments}...]
 @end example
 
 @table @option
@@ -2895,7 +2908,7 @@ qemu-sparc64 /bin/ls
 @subsection Command line options
 
 @example
-usage: qemu-sparc64 [-h] [-d] [-L path] [-s size] [-bsd type] program [arguments...]
+@command{qemu-sparc64} [@option{-h]} [@option{-d]} [@option{-L} @var{path}] [@option{-s} @var{size}] [@option{-bsd} @var{type}] @var{program} [@var{arguments}...]
 @end example
 
 @table @option
@@ -3061,7 +3074,6 @@ Additional Requirements (install in order):
 @item pkg-config: @uref{http://www.freedesktop.org/wiki/Software/pkg-config/}
 @item autoconf: @uref{http://www.gnu.org/software/autoconf/autoconf.html}
 @item automake: @uref{http://www.gnu.org/software/automake/}
-@item libtool: @uref{http://www.gnu.org/software/libtool/}
 @item pixman: @uref{http://www.pixman.org/}
 @end enumerate