#include "qemu-common.h"
#include "qemu-error.h"
-#include "block.h"
#include "scsi.h"
#include "scsi-defs.h"
+#include "sysemu.h"
+#include "blockdev.h"
#define SCSI_DMA_BUF_SIZE 131072
#define SCSI_MAX_INQUIRY_LEN 256
-#define SCSI_REQ_STATUS_RETRY 0x01
+#define SCSI_REQ_STATUS_RETRY 0x01
+#define SCSI_REQ_STATUS_RETRY_TYPE_MASK 0x06
+#define SCSI_REQ_STATUS_RETRY_READ 0x00
+#define SCSI_REQ_STATUS_RETRY_WRITE 0x02
+#define SCSI_REQ_STATUS_RETRY_FLUSH 0x04
typedef struct SCSIDiskState SCSIDiskState;
+typedef struct SCSISense {
+ uint8_t key;
+} SCSISense;
+
typedef struct SCSIDiskReq {
SCSIRequest req;
/* ??? We should probably keep track of whether the data transfer is
uint32_t status;
} SCSIDiskReq;
+typedef enum { SCSI_HD, SCSI_CD } SCSIDriveKind;
+
struct SCSIDiskState
{
SCSIDevice qdev;
/* The qemu block layer uses a fixed 512 byte sector size.
This is the number of 512 byte blocks in a single scsi sector. */
int cluster_size;
+ uint32_t removable;
uint64_t max_lba;
QEMUBH *bh;
char *version;
+ char *serial;
+ SCSISense sense;
+ SCSIDriveKind drive_kind;
};
-static SCSIDiskReq *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun)
+static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type);
+static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf);
+
+static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag,
+ uint32_t lun)
{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
SCSIRequest *req;
SCSIDiskReq *r;
- req = scsi_req_alloc(sizeof(SCSIDiskReq), d, tag, lun);
+ req = scsi_req_alloc(sizeof(SCSIDiskReq), &s->qdev, tag, lun);
r = DO_UPCAST(SCSIDiskReq, req, req);
- r->iov.iov_base = qemu_memalign(512, SCSI_DMA_BUF_SIZE);
- return r;
+ r->iov.iov_base = qemu_blockalign(s->bs, SCSI_DMA_BUF_SIZE);
+ return req;
}
-static void scsi_remove_request(SCSIDiskReq *r)
+static void scsi_free_request(SCSIRequest *req)
{
+ SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
+
qemu_vfree(r->iov.iov_base);
- scsi_req_free(&r->req);
}
-static SCSIDiskReq *scsi_find_request(SCSIDiskState *s, uint32_t tag)
+static void scsi_disk_clear_sense(SCSIDiskState *s)
+{
+ memset(&s->sense, 0, sizeof(s->sense));
+}
+
+static void scsi_disk_set_sense(SCSIDiskState *s, uint8_t key)
{
- return DO_UPCAST(SCSIDiskReq, req, scsi_req_find(&s->qdev, tag));
+ s->sense.key = key;
}
-static void scsi_req_set_status(SCSIRequest *req, int status, int sense_code)
+static void scsi_req_set_status(SCSIDiskReq *r, int status, int sense_code)
{
- req->status = status;
- scsi_dev_set_sense(req->dev, sense_code);
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+
+ r->req.status = status;
+ scsi_disk_set_sense(s, sense_code);
}
/* Helper function for command completion. */
{
DPRINTF("Command complete tag=0x%x status=%d sense=%d\n",
r->req.tag, status, sense);
- scsi_req_set_status(&r->req, status, sense);
+ scsi_req_set_status(r, status, sense);
scsi_req_complete(&r->req);
- scsi_remove_request(r);
}
/* Cancel a pending data transfer. */
-static void scsi_cancel_io(SCSIDevice *d, uint32_t tag)
+static void scsi_cancel_io(SCSIRequest *req)
{
- SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
- SCSIDiskReq *r;
- DPRINTF("Cancel tag=0x%x\n", tag);
- r = scsi_find_request(s, tag);
- if (r) {
- if (r->req.aiocb)
- bdrv_aio_cancel(r->req.aiocb);
- r->req.aiocb = NULL;
- scsi_remove_request(r);
+ SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
+
+ DPRINTF("Cancel tag=0x%x\n", req->tag);
+ if (r->req.aiocb) {
+ bdrv_aio_cancel(r->req.aiocb);
}
+ r->req.aiocb = NULL;
+ scsi_req_dequeue(&r->req);
}
static void scsi_read_complete(void * opaque, int ret)
{
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
+ int n;
+
+ r->req.aiocb = NULL;
if (ret) {
- DPRINTF("IO error\n");
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, 0);
- scsi_command_complete(r, CHECK_CONDITION, NO_SENSE);
- return;
+ if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_READ)) {
+ return;
+ }
}
- DPRINTF("Data ready tag=0x%x len=%" PRId64 "\n", r->req.tag, r->iov.iov_len);
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len);
+ DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->iov.iov_len);
+
+ n = r->iov.iov_len / 512;
+ r->sector += n;
+ r->sector_count -= n;
+ scsi_req_data(&r->req, r->iov.iov_len);
}
+
/* Read more data from scsi device into buffer. */
-static void scsi_read_data(SCSIDevice *d, uint32_t tag)
+static void scsi_read_data(SCSIRequest *req)
{
- SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
- SCSIDiskReq *r;
+ SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
uint32_t n;
- r = scsi_find_request(s, tag);
- if (!r) {
- BADF("Bad read tag 0x%x\n", tag);
- /* ??? This is the wrong error. */
- scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
- return;
- }
if (r->sector_count == (uint32_t)-1) {
- DPRINTF("Read buf_len=%" PRId64 "\n", r->iov.iov_len);
+ DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
r->sector_count = 0;
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len);
+ scsi_req_data(&r->req, r->iov.iov_len);
return;
}
DPRINTF("Read sector_count=%d\n", r->sector_count);
return;
}
+ /* No data transfer may already be in progress */
+ assert(r->req.aiocb == NULL);
+
n = r->sector_count;
if (n > SCSI_DMA_BUF_SIZE / 512)
n = SCSI_DMA_BUF_SIZE / 512;
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
r->req.aiocb = bdrv_aio_readv(s->bs, r->sector, &r->qiov, n,
scsi_read_complete, r);
- if (r->req.aiocb == NULL)
- scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
- r->sector += n;
- r->sector_count -= n;
+ if (r->req.aiocb == NULL) {
+ scsi_read_complete(r, -EIO);
+ }
}
-static int scsi_handle_write_error(SCSIDiskReq *r, int error)
+static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
{
+ int is_read = (type == SCSI_REQ_STATUS_RETRY_READ);
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
- BlockInterfaceErrorAction action = drive_get_on_error(s->bs, 0);
+ BlockErrorAction action = bdrv_get_on_error(s->bs, is_read);
if (action == BLOCK_ERR_IGNORE) {
- bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, 0);
+ bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
return 0;
}
if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
|| action == BLOCK_ERR_STOP_ANY) {
- r->status |= SCSI_REQ_STATUS_RETRY;
- bdrv_mon_event(s->bs, BDRV_ACTION_STOP, 0);
- vm_stop(0);
+
+ type &= SCSI_REQ_STATUS_RETRY_TYPE_MASK;
+ r->status |= SCSI_REQ_STATUS_RETRY | type;
+
+ bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
+ vm_stop(VMSTOP_DISKFULL);
} else {
+ if (type == SCSI_REQ_STATUS_RETRY_READ) {
+ scsi_req_data(&r->req, 0);
+ }
scsi_command_complete(r, CHECK_CONDITION,
HARDWARE_ERROR);
- bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, 0);
+ bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
}
return 1;
r->req.aiocb = NULL;
if (ret) {
- if (scsi_handle_write_error(r, -ret))
+ if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_WRITE)) {
return;
+ }
}
n = r->iov.iov_len / 512;
}
r->iov.iov_len = len;
DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, len);
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, len);
+ scsi_req_data(&r->req, len);
}
}
-static void scsi_write_request(SCSIDiskReq *r)
+static int scsi_write_data(SCSIRequest *req)
{
+ SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
uint32_t n;
+ /* No data transfer may already be in progress */
+ assert(r->req.aiocb == NULL);
+
n = r->iov.iov_len / 512;
if (n) {
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
r->req.aiocb = bdrv_aio_writev(s->bs, r->sector, &r->qiov, n,
scsi_write_complete, r);
- if (r->req.aiocb == NULL)
- scsi_command_complete(r, CHECK_CONDITION,
- HARDWARE_ERROR);
+ if (r->req.aiocb == NULL) {
+ scsi_write_complete(r, -EIO);
+ }
} else {
/* Invoke completion routine to fetch data from host. */
scsi_write_complete(r, 0);
}
-}
-
-/* Write data to a scsi device. Returns nonzero on failure.
- The transfer may complete asynchronously. */
-static int scsi_write_data(SCSIDevice *d, uint32_t tag)
-{
- SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
- SCSIDiskReq *r;
-
- DPRINTF("Write data tag=0x%x\n", tag);
- r = scsi_find_request(s, tag);
- if (!r) {
- BADF("Bad write tag 0x%x\n", tag);
- scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
- return 1;
- }
-
- if (r->req.aiocb)
- BADF("Data transfer already in progress\n");
-
- scsi_write_request(r);
return 0;
}
QTAILQ_FOREACH(req, &s->qdev.requests, next) {
r = DO_UPCAST(SCSIDiskReq, req, req);
if (r->status & SCSI_REQ_STATUS_RETRY) {
- r->status &= ~SCSI_REQ_STATUS_RETRY;
- scsi_write_request(r);
+ int status = r->status;
+ int ret;
+
+ r->status &=
+ ~(SCSI_REQ_STATUS_RETRY | SCSI_REQ_STATUS_RETRY_TYPE_MASK);
+
+ switch (status & SCSI_REQ_STATUS_RETRY_TYPE_MASK) {
+ case SCSI_REQ_STATUS_RETRY_READ:
+ scsi_read_data(&r->req);
+ break;
+ case SCSI_REQ_STATUS_RETRY_WRITE:
+ scsi_write_data(&r->req);
+ break;
+ case SCSI_REQ_STATUS_RETRY_FLUSH:
+ ret = scsi_disk_emulate_command(r, r->iov.iov_base);
+ if (ret == 0) {
+ scsi_command_complete(r, GOOD, NO_SENSE);
+ }
+ }
}
}
}
}
/* Return a pointer to the data buffer. */
-static uint8_t *scsi_get_buf(SCSIDevice *d, uint32_t tag)
+static uint8_t *scsi_get_buf(SCSIRequest *req)
{
- SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
- SCSIDiskReq *r;
+ SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
- r = scsi_find_request(s, tag);
- if (!r) {
- BADF("Bad buffer tag 0x%x\n", tag);
- return NULL;
- }
return (uint8_t *)r->iov.iov_base;
}
return -1;
}
- if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+ if (s->drive_kind == SCSI_CD) {
outbuf[buflen++] = 5;
} else {
outbuf[buflen++] = 0;
switch (page_code) {
case 0x00: /* Supported page codes, mandatory */
+ {
+ int pages;
DPRINTF("Inquiry EVPD[Supported pages] "
"buffer size %zd\n", req->cmd.xfer);
- outbuf[buflen++] = 4; // number of pages
+ pages = buflen++;
outbuf[buflen++] = 0x00; // list of supported pages (this page)
outbuf[buflen++] = 0x80; // unit serial number
outbuf[buflen++] = 0x83; // device identification
- outbuf[buflen++] = 0xb0; // block device characteristics
+ if (s->drive_kind == SCSI_HD) {
+ outbuf[buflen++] = 0xb0; // block limits
+ outbuf[buflen++] = 0xb2; // thin provisioning
+ }
+ outbuf[pages] = buflen - pages - 1; // number of pages
break;
-
+ }
case 0x80: /* Device serial number, optional */
{
- const char *serial = req->dev->conf.dinfo->serial ?
- req->dev->conf.dinfo->serial : "0";
- int l = strlen(serial);
+ int l = strlen(s->serial);
if (l > req->cmd.xfer)
l = req->cmd.xfer;
DPRINTF("Inquiry EVPD[Serial number] "
"buffer size %zd\n", req->cmd.xfer);
outbuf[buflen++] = l;
- memcpy(outbuf+buflen, serial, l);
+ memcpy(outbuf+buflen, s->serial, l);
buflen += l;
break;
}
DPRINTF("Inquiry EVPD[Device identification] "
"buffer size %zd\n", req->cmd.xfer);
- outbuf[buflen++] = 3 + id_len;
+ outbuf[buflen++] = 4 + id_len;
outbuf[buflen++] = 0x2; // ASCII
outbuf[buflen++] = 0; // not officially assigned
outbuf[buflen++] = 0; // reserved
buflen += id_len;
break;
}
- case 0xb0: /* block device characteristics */
+ case 0xb0: /* block limits */
{
+ unsigned int unmap_sectors =
+ s->qdev.conf.discard_granularity / s->qdev.blocksize;
unsigned int min_io_size =
s->qdev.conf.min_io_size / s->qdev.blocksize;
unsigned int opt_io_size =
s->qdev.conf.opt_io_size / s->qdev.blocksize;
+ if (s->drive_kind == SCSI_CD) {
+ DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
+ page_code);
+ return -1;
+ }
/* required VPD size with unmap support */
outbuf[3] = buflen = 0x3c;
outbuf[13] = (opt_io_size >> 16) & 0xff;
outbuf[14] = (opt_io_size >> 8) & 0xff;
outbuf[15] = opt_io_size & 0xff;
+
+ /* optimal unmap granularity */
+ outbuf[28] = (unmap_sectors >> 24) & 0xff;
+ outbuf[29] = (unmap_sectors >> 16) & 0xff;
+ outbuf[30] = (unmap_sectors >> 8) & 0xff;
+ outbuf[31] = unmap_sectors & 0xff;
+ break;
+ }
+ case 0xb2: /* thin provisioning */
+ {
+ outbuf[3] = buflen = 8;
+ outbuf[4] = 0;
+ outbuf[5] = 0x40; /* write same with unmap supported */
+ outbuf[6] = 0;
+ outbuf[7] = 0;
break;
}
default:
return buflen;
}
- if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+ if (s->drive_kind == SCSI_CD) {
outbuf[0] = 5;
outbuf[1] = 0x80;
memcpy(&outbuf[16], "QEMU CD-ROM ", 16);
} else {
outbuf[0] = 0;
+ outbuf[1] = s->removable ? 0x80 : 0;
memcpy(&outbuf[16], "QEMU HARDDISK ", 16);
}
memcpy(&outbuf[8], "QEMU ", 8);
memset(&outbuf[32], 0, 4);
- memcpy(&outbuf[32], s->version ? s->version : QEMU_VERSION,
- MIN(4, strlen(s->version ? s->version : QEMU_VERSION)));
+ memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
/*
* We claim conformance to SPC-3, which is required for guests
* to ask for modern features like READ CAPACITY(16) or the
return buflen;
}
-static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p)
+static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p,
+ int page_control)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
BlockDriverState *bdrv = s->bs;
int cylinders, heads, secs;
+ /*
+ * If Changeable Values are requested, a mask denoting those mode parameters
+ * that are changeable shall be returned. As we currently don't support
+ * parameter changes via MODE_SELECT all bits are returned set to zero.
+ * The buffer was already menset to zero by the caller of this function.
+ */
switch (page) {
case 4: /* Rigid disk device geometry page. */
p[0] = 4;
p[1] = 0x16;
+ if (page_control == 1) { /* Changeable Values */
+ return p[1] + 2;
+ }
/* if a geometry hint is available, use it */
bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs);
p[2] = (cylinders >> 16) & 0xff;
/* Medium rotation rate [rpm], 5400 rpm */
p[20] = (5400 >> 8) & 0xff;
p[21] = 5400 & 0xff;
- return 0x16;
+ return p[1] + 2;
case 5: /* Flexible disk device geometry page. */
p[0] = 5;
p[1] = 0x1e;
+ if (page_control == 1) { /* Changeable Values */
+ return p[1] + 2;
+ }
/* Transfer rate [kbit/s], 5Mbit/s */
p[2] = 5000 >> 8;
p[3] = 5000 & 0xff;
/* Medium rotation rate [rpm], 5400 rpm */
p[28] = (5400 >> 8) & 0xff;
p[29] = 5400 & 0xff;
- return 0x1e;
+ return p[1] + 2;
case 8: /* Caching page. */
p[0] = 8;
p[1] = 0x12;
+ if (page_control == 1) { /* Changeable Values */
+ return p[1] + 2;
+ }
if (bdrv_enable_write_cache(s->bs)) {
p[2] = 4; /* WCE */
}
- return 20;
+ return p[1] + 2;
case 0x2a: /* CD Capabilities and Mechanical Status page. */
- if (bdrv_get_type_hint(bdrv) != BDRV_TYPE_CDROM)
+ if (s->drive_kind != SCSI_CD)
return 0;
p[0] = 0x2a;
p[1] = 0x14;
+ if (page_control == 1) { /* Changeable Values */
+ return p[1] + 2;
+ }
p[2] = 3; // CD-R & CD-RW read
p[3] = 0; // Writing not supported
p[4] = 0x7f; /* Audio, composite, digital out,
p[19] = (16 * 176) & 0xff;
p[20] = (16 * 176) >> 8; // 16x write speed current
p[21] = (16 * 176) & 0xff;
- return 22;
+ return p[1] + 2;
default:
return 0;
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
uint64_t nb_sectors;
- int page, dbd, buflen;
+ int page, dbd, buflen, page_control;
uint8_t *p;
+ uint8_t dev_specific_param;
dbd = req->cmd.buf[1] & 0x8;
page = req->cmd.buf[2] & 0x3f;
- DPRINTF("Mode Sense (page %d, len %zd)\n", page, req->cmd.xfer);
+ page_control = (req->cmd.buf[2] & 0xc0) >> 6;
+ DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
+ (req->cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, req->cmd.xfer, page_control);
memset(outbuf, 0, req->cmd.xfer);
p = outbuf;
- p[1] = 0; /* Default media type. */
- p[3] = 0; /* Block descriptor length. */
if (bdrv_is_read_only(s->bs)) {
- p[2] = 0x80; /* Readonly. */
+ dev_specific_param = 0x80; /* Readonly. */
+ } else {
+ dev_specific_param = 0x00;
+ }
+
+ if (req->cmd.buf[0] == MODE_SENSE) {
+ p[1] = 0; /* Default media type. */
+ p[2] = dev_specific_param;
+ p[3] = 0; /* Block descriptor length. */
+ p += 4;
+ } else { /* MODE_SENSE_10 */
+ p[2] = 0; /* Default media type. */
+ p[3] = dev_specific_param;
+ p[6] = p[7] = 0; /* Block descriptor length. */
+ p += 8;
}
- p += 4;
bdrv_get_geometry(s->bs, &nb_sectors);
- if ((~dbd) & nb_sectors) {
- outbuf[3] = 8; /* Block descriptor length */
+ if (!dbd && nb_sectors) {
+ if (req->cmd.buf[0] == MODE_SENSE) {
+ outbuf[3] = 8; /* Block descriptor length */
+ } else { /* MODE_SENSE_10 */
+ outbuf[7] = 8; /* Block descriptor length */
+ }
nb_sectors /= s->cluster_size;
- nb_sectors--;
if (nb_sectors > 0xffffff)
- nb_sectors = 0xffffff;
+ nb_sectors = 0;
p[0] = 0; /* media density code */
p[1] = (nb_sectors >> 16) & 0xff;
p[2] = (nb_sectors >> 8) & 0xff;
p += 8;
}
+ if (page_control == 3) { /* Saved Values */
+ return -1; /* ILLEGAL_REQUEST */
+ }
+
switch (page) {
case 0x04:
case 0x05:
case 0x08:
case 0x2a:
- p += mode_sense_page(req, page, p);
+ p += mode_sense_page(req, page, p, page_control);
break;
case 0x3f:
- p += mode_sense_page(req, 0x08, p);
- p += mode_sense_page(req, 0x2a, p);
+ p += mode_sense_page(req, 0x08, p, page_control);
+ p += mode_sense_page(req, 0x2a, p, page_control);
break;
+ default:
+ return -1; /* ILLEGAL_REQUEST */
}
buflen = p - outbuf;
- outbuf[0] = buflen - 4;
+ /*
+ * The mode data length field specifies the length in bytes of the
+ * following data that is available to be transferred. The mode data
+ * length does not include itself.
+ */
+ if (req->cmd.buf[0] == MODE_SENSE) {
+ outbuf[0] = buflen - 1;
+ } else { /* MODE_SENSE_10 */
+ outbuf[0] = ((buflen - 2) >> 8) & 0xff;
+ outbuf[1] = (buflen - 2) & 0xff;
+ }
if (buflen > req->cmd.xfer)
buflen = req->cmd.xfer;
return buflen;
return toclen;
}
-static int scsi_disk_emulate_command(SCSIRequest *req, uint8_t *outbuf)
+static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
{
+ SCSIRequest *req = &r->req;
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
uint64_t nb_sectors;
int buflen = 0;
+ int ret;
switch (req->cmd.buf[0]) {
case TEST_UNIT_READY:
goto illegal_request;
memset(outbuf, 0, 4);
buflen = 4;
- if (req->dev->sense.key == NOT_READY && req->cmd.xfer >= 18) {
+ if (s->sense.key == NOT_READY && req->cmd.xfer >= 18) {
memset(outbuf, 0, 18);
buflen = 18;
outbuf[7] = 10;
}
outbuf[0] = 0xf0;
outbuf[1] = 0;
- outbuf[2] = req->dev->sense.key;
- scsi_dev_clear_sense(req->dev);
+ outbuf[2] = s->sense.key;
+ scsi_disk_clear_sense(s);
break;
case INQUIRY:
buflen = scsi_disk_emulate_inquiry(req, outbuf);
goto illegal_request;
break;
case START_STOP:
- if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM && (req->cmd.buf[4] & 2)) {
+ if (s->drive_kind == SCSI_CD && (req->cmd.buf[4] & 2)) {
/* load/eject medium */
bdrv_eject(s->bs, !(req->cmd.buf[4] & 1));
}
buflen = 8;
break;
case SYNCHRONIZE_CACHE:
- bdrv_flush(s->bs);
+ ret = bdrv_flush(s->bs);
+ if (ret < 0) {
+ if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_FLUSH)) {
+ return -1;
+ }
+ }
break;
case GET_CONFIGURATION:
memset(outbuf, 0, 8);
outbuf[11] = 0;
outbuf[12] = 0;
outbuf[13] = get_physical_block_exp(&s->qdev.conf);
+
+ /* set TPE bit if the format supports discard */
+ if (s->qdev.conf.discard_granularity) {
+ outbuf[14] = 0x80;
+ }
+
/* Protection, exponent and lowest lba field left blank. */
buflen = req->cmd.xfer;
break;
break;
case VERIFY:
break;
+ case REZERO_UNIT:
+ DPRINTF("Rezero Unit\n");
+ if (!bdrv_is_inserted(s->bs)) {
+ goto not_ready;
+ }
+ break;
default:
goto illegal_request;
}
- scsi_req_set_status(req, GOOD, NO_SENSE);
+ scsi_req_set_status(r, GOOD, NO_SENSE);
return buflen;
not_ready:
- scsi_req_set_status(req, CHECK_CONDITION, NOT_READY);
- return 0;
+ scsi_command_complete(r, CHECK_CONDITION, NOT_READY);
+ return -1;
illegal_request:
- scsi_req_set_status(req, CHECK_CONDITION, ILLEGAL_REQUEST);
- return 0;
+ scsi_command_complete(r, CHECK_CONDITION, ILLEGAL_REQUEST);
+ return -1;
}
/* Execute a scsi command. Returns the length of the data expected by the
(eg. disk reads), negative for transfers to the device (eg. disk writes),
and zero if the command does not transfer any data. */
-static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
- uint8_t *buf, int lun)
+static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
{
- SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
- uint64_t lba;
- uint32_t len;
- int cmdlen;
+ SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
+ int32_t len;
int is_write;
uint8_t command;
uint8_t *outbuf;
- SCSIDiskReq *r;
int rc;
+ scsi_req_enqueue(req);
command = buf[0];
- r = scsi_find_request(s, tag);
- if (r) {
- BADF("Tag 0x%x already in use\n", tag);
- scsi_cancel_io(d, tag);
- }
- /* ??? Tags are not unique for different luns. We only implement a
- single lun, so this should not matter. */
- r = scsi_new_request(d, tag, lun);
outbuf = (uint8_t *)r->iov.iov_base;
is_write = 0;
DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]);
- switch (command >> 5) {
- case 0:
- lba = (uint64_t) buf[3] | ((uint64_t) buf[2] << 8) |
- (((uint64_t) buf[1] & 0x1f) << 16);
- len = buf[4];
- cmdlen = 6;
- break;
- case 1:
- case 2:
- lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) |
- ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24);
- len = buf[8] | (buf[7] << 8);
- cmdlen = 10;
- break;
- case 4:
- lba = (uint64_t) buf[9] | ((uint64_t) buf[8] << 8) |
- ((uint64_t) buf[7] << 16) | ((uint64_t) buf[6] << 24) |
- ((uint64_t) buf[5] << 32) | ((uint64_t) buf[4] << 40) |
- ((uint64_t) buf[3] << 48) | ((uint64_t) buf[2] << 56);
- len = buf[13] | (buf[12] << 8) | (buf[11] << 16) | (buf[10] << 24);
- cmdlen = 16;
- break;
- case 5:
- lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) |
- ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24);
- len = buf[9] | (buf[8] << 8) | (buf[7] << 16) | (buf[6] << 24);
- cmdlen = 12;
- break;
- default:
+
+ if (scsi_req_parse(&r->req, buf) != 0) {
BADF("Unsupported command length, command %x\n", command);
goto fail;
}
#ifdef DEBUG_SCSI
{
int i;
- for (i = 1; i < cmdlen; i++) {
+ for (i = 1; i < r->req.cmd.len; i++) {
printf(" 0x%02x", buf[i]);
}
printf("\n");
}
#endif
- if (scsi_req_parse(&r->req, buf) != 0) {
- BADF("Unsupported command length, command %x\n", command);
- goto fail;
- }
- assert(r->req.cmd.len == cmdlen);
- assert(r->req.cmd.lba == lba);
-
- if (lun || buf[1] >> 5) {
+ if (req->lun || buf[1] >> 5) {
/* Only LUN 0 supported. */
- DPRINTF("Unimplemented LUN %d\n", lun ? lun : buf[1] >> 5);
+ DPRINTF("Unimplemented LUN %d\n", req->lun ? req->lun : buf[1] >> 5);
if (command != REQUEST_SENSE && command != INQUIRY)
goto fail;
}
case SERVICE_ACTION_IN:
case REPORT_LUNS:
case VERIFY:
- rc = scsi_disk_emulate_command(&r->req, outbuf);
- if (rc > 0) {
- r->iov.iov_len = rc;
- } else {
- scsi_req_complete(&r->req);
- scsi_remove_request(r);
+ case REZERO_UNIT:
+ rc = scsi_disk_emulate_command(r, outbuf);
+ if (rc < 0) {
return 0;
}
+
+ r->iov.iov_len = rc;
break;
case READ_6:
case READ_10:
case READ_12:
case READ_16:
- DPRINTF("Read (sector %" PRId64 ", count %d)\n", lba, len);
- if (lba > s->max_lba)
+ len = r->req.cmd.xfer / s->qdev.blocksize;
+ DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
+ if (r->req.cmd.lba > s->max_lba)
goto illegal_lba;
- r->sector = lba * s->cluster_size;
+ r->sector = r->req.cmd.lba * s->cluster_size;
r->sector_count = len * s->cluster_size;
break;
case WRITE_6:
case WRITE_10:
case WRITE_12:
case WRITE_16:
- DPRINTF("Write (sector %" PRId64 ", count %d)\n", lba, len);
- if (lba > s->max_lba)
+ case WRITE_VERIFY:
+ case WRITE_VERIFY_12:
+ case WRITE_VERIFY_16:
+ len = r->req.cmd.xfer / s->qdev.blocksize;
+ DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
+ (command & 0xe) == 0xe ? "And Verify " : "",
+ r->req.cmd.lba, len);
+ if (r->req.cmd.lba > s->max_lba)
goto illegal_lba;
- r->sector = lba * s->cluster_size;
+ r->sector = r->req.cmd.lba * s->cluster_size;
r->sector_count = len * s->cluster_size;
is_write = 1;
+ break;
+ case MODE_SELECT:
+ DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
+ /* We don't support mode parameter changes.
+ Allow the mode parameter header + block descriptors only. */
+ if (r->req.cmd.xfer > 12) {
+ goto fail;
+ }
+ break;
+ case MODE_SELECT_10:
+ DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
+ /* We don't support mode parameter changes.
+ Allow the mode parameter header + block descriptors only. */
+ if (r->req.cmd.xfer > 16) {
+ goto fail;
+ }
+ break;
+ case SEEK_6:
+ case SEEK_10:
+ DPRINTF("Seek(%d) (sector %" PRId64 ")\n", command == SEEK_6 ? 6 : 10,
+ r->req.cmd.lba);
+ if (r->req.cmd.lba > s->max_lba) {
+ goto illegal_lba;
+ }
+ break;
+ case WRITE_SAME_16:
+ len = r->req.cmd.xfer / s->qdev.blocksize;
+
+ DPRINTF("WRITE SAME(16) (sector %" PRId64 ", count %d)\n",
+ r->req.cmd.lba, len);
+
+ if (r->req.cmd.lba > s->max_lba) {
+ goto illegal_lba;
+ }
+
+ /*
+ * We only support WRITE SAME with the unmap bit set for now.
+ */
+ if (!(buf[1] & 0x8)) {
+ goto fail;
+ }
+
+ rc = bdrv_discard(s->bs, r->req.cmd.lba * s->cluster_size,
+ len * s->cluster_size);
+ if (rc < 0) {
+ /* XXX: better error code ?*/
+ goto fail;
+ }
+
break;
default:
- DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
+ DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
fail:
scsi_command_complete(r, CHECK_CONDITION, ILLEGAL_REQUEST);
- return 0;
+ return 0;
illegal_lba:
scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
return 0;
}
len = r->sector_count * 512 + r->iov.iov_len;
if (is_write) {
- return -len;
+ len = -len;
} else {
if (!r->sector_count)
r->sector_count = -1;
- return len;
}
+ return len;
+}
+
+static void scsi_disk_reset(DeviceState *dev)
+{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
+ uint64_t nb_sectors;
+
+ scsi_device_purge_requests(&s->qdev);
+
+ bdrv_get_geometry(s->bs, &nb_sectors);
+ nb_sectors /= s->cluster_size;
+ if (nb_sectors) {
+ nb_sectors--;
+ }
+ s->max_lba = nb_sectors;
}
static void scsi_destroy(SCSIDevice *dev)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
- SCSIDiskReq *r;
- while (!QTAILQ_EMPTY(&s->qdev.requests)) {
- r = DO_UPCAST(SCSIDiskReq, req, QTAILQ_FIRST(&s->qdev.requests));
- scsi_remove_request(r);
- }
- drive_uninit(s->qdev.conf.dinfo);
+ scsi_device_purge_requests(&s->qdev);
+ blockdev_mark_auto_del(s->qdev.conf.bs);
}
-static int scsi_disk_initfn(SCSIDevice *dev)
+static int scsi_initfn(SCSIDevice *dev, SCSIDriveKind kind)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
- uint64_t nb_sectors;
+ DriveInfo *dinfo;
- if (!s->qdev.conf.dinfo || !s->qdev.conf.dinfo->bdrv) {
+ if (!s->qdev.conf.bs) {
error_report("scsi-disk: drive property not set");
return -1;
}
- s->bs = s->qdev.conf.dinfo->bdrv;
+ s->bs = s->qdev.conf.bs;
+ s->drive_kind = kind;
+
+ if (kind == SCSI_HD && !bdrv_is_inserted(s->bs)) {
+ error_report("Device needs media, but drive is empty");
+ return -1;
+ }
+
+ if (!s->serial) {
+ /* try to fall back to value set with legacy -drive serial=... */
+ dinfo = drive_get_by_blockdev(s->bs);
+ s->serial = qemu_strdup(*dinfo->serial ? dinfo->serial : "0");
+ }
+
+ if (!s->version) {
+ s->version = qemu_strdup(QEMU_VERSION);
+ }
if (bdrv_is_sg(s->bs)) {
error_report("scsi-disk: unwanted /dev/sg*");
return -1;
}
- if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+ if (kind == SCSI_CD) {
s->qdev.blocksize = 2048;
} else {
s->qdev.blocksize = s->qdev.conf.logical_block_size;
}
s->cluster_size = s->qdev.blocksize / 512;
+ s->bs->buffer_alignment = s->qdev.blocksize;
s->qdev.type = TYPE_DISK;
- bdrv_get_geometry(s->bs, &nb_sectors);
- nb_sectors /= s->cluster_size;
- if (nb_sectors)
- nb_sectors--;
- s->max_lba = nb_sectors;
qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s);
+ bdrv_set_removable(s->bs, kind == SCSI_CD);
+ add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, ",0");
return 0;
}
-static SCSIDeviceInfo scsi_disk_info = {
- .qdev.name = "scsi-disk",
- .qdev.desc = "virtual scsi disk or cdrom",
- .qdev.size = sizeof(SCSIDiskState),
- .init = scsi_disk_initfn,
- .destroy = scsi_destroy,
- .send_command = scsi_send_command,
- .read_data = scsi_read_data,
- .write_data = scsi_write_data,
- .cancel_io = scsi_cancel_io,
- .get_buf = scsi_get_buf,
- .qdev.props = (Property[]) {
- DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),
- DEFINE_PROP_STRING("ver", SCSIDiskState, version),
- DEFINE_PROP_END_OF_LIST(),
- },
+static int scsi_hd_initfn(SCSIDevice *dev)
+{
+ return scsi_initfn(dev, SCSI_HD);
+}
+
+static int scsi_cd_initfn(SCSIDevice *dev)
+{
+ return scsi_initfn(dev, SCSI_CD);
+}
+
+static int scsi_disk_initfn(SCSIDevice *dev)
+{
+ SCSIDriveKind kind;
+ DriveInfo *dinfo;
+
+ if (!dev->conf.bs) {
+ kind = SCSI_HD; /* will die in scsi_initfn() */
+ } else {
+ dinfo = drive_get_by_blockdev(dev->conf.bs);
+ kind = dinfo->media_cd ? SCSI_CD : SCSI_HD;
+ }
+
+ return scsi_initfn(dev, kind);
+}
+
+#define DEFINE_SCSI_DISK_PROPERTIES() \
+ DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf), \
+ DEFINE_PROP_STRING("ver", SCSIDiskState, version), \
+ DEFINE_PROP_STRING("serial", SCSIDiskState, serial)
+
+static SCSIDeviceInfo scsi_disk_info[] = {
+ {
+ .qdev.name = "scsi-hd",
+ .qdev.fw_name = "disk",
+ .qdev.desc = "virtual SCSI disk",
+ .qdev.size = sizeof(SCSIDiskState),
+ .qdev.reset = scsi_disk_reset,
+ .init = scsi_hd_initfn,
+ .destroy = scsi_destroy,
+ .alloc_req = scsi_new_request,
+ .free_req = scsi_free_request,
+ .send_command = scsi_send_command,
+ .read_data = scsi_read_data,
+ .write_data = scsi_write_data,
+ .cancel_io = scsi_cancel_io,
+ .get_buf = scsi_get_buf,
+ .qdev.props = (Property[]) {
+ DEFINE_SCSI_DISK_PROPERTIES(),
+ DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+ },{
+ .qdev.name = "scsi-cd",
+ .qdev.fw_name = "disk",
+ .qdev.desc = "virtual SCSI CD-ROM",
+ .qdev.size = sizeof(SCSIDiskState),
+ .qdev.reset = scsi_disk_reset,
+ .init = scsi_cd_initfn,
+ .destroy = scsi_destroy,
+ .alloc_req = scsi_new_request,
+ .free_req = scsi_free_request,
+ .send_command = scsi_send_command,
+ .read_data = scsi_read_data,
+ .write_data = scsi_write_data,
+ .cancel_io = scsi_cancel_io,
+ .get_buf = scsi_get_buf,
+ .qdev.props = (Property[]) {
+ DEFINE_SCSI_DISK_PROPERTIES(),
+ DEFINE_PROP_END_OF_LIST(),
+ },
+ },{
+ .qdev.name = "scsi-disk", /* legacy -device scsi-disk */
+ .qdev.fw_name = "disk",
+ .qdev.desc = "virtual SCSI disk or CD-ROM (legacy)",
+ .qdev.size = sizeof(SCSIDiskState),
+ .qdev.reset = scsi_disk_reset,
+ .init = scsi_disk_initfn,
+ .destroy = scsi_destroy,
+ .alloc_req = scsi_new_request,
+ .free_req = scsi_free_request,
+ .send_command = scsi_send_command,
+ .read_data = scsi_read_data,
+ .write_data = scsi_write_data,
+ .cancel_io = scsi_cancel_io,
+ .get_buf = scsi_get_buf,
+ .qdev.props = (Property[]) {
+ DEFINE_SCSI_DISK_PROPERTIES(),
+ DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+ }
};
static void scsi_disk_register_devices(void)
{
- scsi_qdev_register(&scsi_disk_info);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(scsi_disk_info); i++) {
+ scsi_qdev_register(&scsi_disk_info[i]);
+ }
}
device_init(scsi_disk_register_devices)
projects / qemu.git / blobdiff