Reorganize struct Qcow2Cache for better struct packing

[qemu.git] / hw / scsi-disk.c

diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 87f9e8677e50121e909d7121506cca8da0021f68..488eedd2cd8b4988c137ad451d1aa671a936b2a0 100644 (file)
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -72,6 +72,7 @@ struct SCSIDiskState
     /* The qemu block layer uses a fixed 512 byte sector size.
        This is the number of 512 byte blocks in a single scsi sector.  */
     int cluster_size;
+    uint32_t removable;
     uint64_t max_lba;
     QEMUBH *bh;
     char *version;
@@ -424,7 +425,8 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
             outbuf[buflen++] = 0x80; // unit serial number
             outbuf[buflen++] = 0x83; // device identification
             if (bdrv_get_type_hint(s->bs) != BDRV_TYPE_CDROM) {
-                outbuf[buflen++] = 0xb0; // block device characteristics
+                outbuf[buflen++] = 0xb0; // block limits
+                outbuf[buflen++] = 0xb2; // thin provisioning
             }
             outbuf[pages] = buflen - pages - 1; // number of pages
             break;
@@ -466,8 +468,10 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
             buflen += id_len;
             break;
         }
-        case 0xb0: /* block device characteristics */
+        case 0xb0: /* block limits */
         {
+            unsigned int unmap_sectors =
+                    s->qdev.conf.discard_granularity / s->qdev.blocksize;
             unsigned int min_io_size =
                     s->qdev.conf.min_io_size / s->qdev.blocksize;
             unsigned int opt_io_size =
@@ -492,6 +496,21 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
             outbuf[13] = (opt_io_size >> 16) & 0xff;
             outbuf[14] = (opt_io_size >> 8) & 0xff;
             outbuf[15] = opt_io_size & 0xff;
+
+            /* optimal unmap granularity */
+            outbuf[28] = (unmap_sectors >> 24) & 0xff;
+            outbuf[29] = (unmap_sectors >> 16) & 0xff;
+            outbuf[30] = (unmap_sectors >> 8) & 0xff;
+            outbuf[31] = unmap_sectors & 0xff;
+            break;
+        }
+        case 0xb2: /* thin provisioning */
+        {
+            outbuf[3] = buflen = 8;
+            outbuf[4] = 0;
+            outbuf[5] = 0x40; /* write same with unmap supported */
+            outbuf[6] = 0;
+            outbuf[7] = 0;
             break;
         }
         default:
@@ -534,6 +553,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
         memcpy(&outbuf[16], "QEMU CD-ROM     ", 16);
     } else {
         outbuf[0] = 0;
+        outbuf[1] = s->removable ? 0x80 : 0;
         memcpy(&outbuf[16], "QEMU HARDDISK   ", 16);
     }
     memcpy(&outbuf[8], "QEMU    ", 8);
@@ -959,6 +979,12 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
             outbuf[11] = 0;
             outbuf[12] = 0;
             outbuf[13] = get_physical_block_exp(&s->qdev.conf);
+
+            /* set TPE bit if the format supports discard */
+            if (s->qdev.conf.discard_granularity) {
+                outbuf[14] = 0x80;
+            }
+
             /* Protection, exponent and lowest lba field left blank. */
             buflen = req->cmd.xfer;
             break;
@@ -1122,6 +1148,31 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
         if (r->req.cmd.lba > s->max_lba) {
             goto illegal_lba;
         }
+        break;
+    case WRITE_SAME_16:
+        len = r->req.cmd.xfer / d->blocksize;
+
+        DPRINTF("WRITE SAME(16) (sector %" PRId64 ", count %d)\n",
+                r->req.cmd.lba, len);
+
+        if (r->req.cmd.lba > s->max_lba) {
+            goto illegal_lba;
+        }
+
+        /*
+         * We only support WRITE SAME with the unmap bit set for now.
+         */
+        if (!(buf[1] & 0x8)) {
+            goto fail;
+        }
+
+        rc = bdrv_discard(s->bs, r->req.cmd.lba * s->cluster_size,
+                          len * s->cluster_size);
+        if (rc < 0) {
+            /* XXX: better error code ?*/
+            goto fail;
+        }
+
         break;
     default:
         DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
@@ -1246,6 +1297,7 @@ static SCSIDeviceInfo scsi_disk_info = {
         DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),
         DEFINE_PROP_STRING("ver",  SCSIDiskState, version),
         DEFINE_PROP_STRING("serial",  SCSIDiskState, serial),
+        DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
         DEFINE_PROP_END_OF_LIST(),
     },
 };