static="no"
cross_prefix=""
audio_drv_list=""
-audio_card_list="ac97 es1370 sb16 hda"
-audio_possible_cards="ac97 es1370 sb16 cs4231a adlib gus hda"
-block_drv_whitelist=""
+block_drv_rw_whitelist=""
+block_drv_ro_whitelist=""
host_cc="cc"
libs_softmmu=""
libs_tools=""
xfs=""
vhost_net="no"
+vhost_scsi="no"
kvm="no"
gprof="no"
debug_tcg="no"
pkgversion=""
pie=""
zero_malloc=""
+qom_cast_debug="yes"
trace_backend="nop"
trace_file="trace"
spice=""
fi
elif check_define __arm__ ; then
cpu="arm"
+elif check_define __aarch64__ ; then
+ cpu="aarch64"
elif check_define __hppa__ ; then
cpu="hppa"
else
armv*b|armv*l|arm)
cpu="arm"
;;
+ aarch64)
+ cpu="aarch64"
+ ;;
hppa|parisc|parisc64)
cpu="hppa"
;;
OpenBSD)
bsd="yes"
make="${MAKE-gmake}"
- audio_drv_list="oss"
- audio_possible_drivers="oss sdl esd"
- oss_lib="-lossaudio"
+ audio_drv_list="sdl"
+ audio_possible_drivers="sdl esd"
;;
Darwin)
bsd="yes"
usb="linux"
kvm="yes"
vhost_net="yes"
+ vhost_scsi="yes"
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
audio_possible_drivers="$audio_possible_drivers fmod"
fi
- QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers $QEMU_INCLUDES"
+ QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers -I$(pwd)/linux-headers $QEMU_INCLUDES"
;;
esac
if [ "$bsd" = "yes" ] ; then
if [ "$darwin" != "yes" ] ; then
- usb="bsd"
+ if [ "$targetos" != "FreeBSD" ]; then
+ usb="bsd"
+ fi
bsd_user="yes"
fi
fi
QEMU_CFLAGS="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS"
# enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later)
QEMU_CFLAGS="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS"
- if test "$cpu" = "i386"; then
- # We need something better than i386 for __sync_val_compare_and_swap
- # and can expect that QEMU will only run on i686 or later.
- QEMU_CFLAGS="-march=i686 $QEMU_CFLAGS"
- fi
LIBS="-lwinmm -lws2_32 -liphlpapi $LIBS"
cat > $TMPC << EOF
int main(void) { return 0; }
qemu_docdir="\${prefix}"
bindir="\${prefix}"
sysconfdir="\${prefix}"
- local_statedir="\${prefix}"
+ local_statedir=
confsuffix=""
libs_qga="-lws2_32 -lwinmm -lpowrprof $libs_qga"
fi
;;
--enable-sdl) sdl="yes"
;;
+ --disable-qom-cast-debug) qom_cast_debug="no"
+ ;;
+ --enable-qom-cast-debug) qom_cast_debug="yes"
+ ;;
--disable-virtfs) virtfs="no"
;;
--enable-virtfs) virtfs="yes"
;;
--oss-lib=*) oss_lib="$optarg"
;;
- --audio-card-list=*) audio_card_list=`echo "$optarg" | sed -e 's/,/ /g'`
- ;;
--audio-drv-list=*) audio_drv_list="$optarg"
;;
- --block-drv-whitelist=*) block_drv_whitelist=`echo "$optarg" | sed -e 's/,/ /g'`
+ --block-drv-rw-whitelist=*|--block-drv-whitelist=*) block_drv_rw_whitelist=`echo "$optarg" | sed -e 's/,/ /g'`
+ ;;
+ --block-drv-ro-whitelist=*) block_drv_ro_whitelist=`echo "$optarg" | sed -e 's/,/ /g'`
;;
--enable-debug-tcg) debug_tcg="yes"
;;
;;
--enable-vhost-net) vhost_net="yes"
;;
+ --disable-vhost-scsi) vhost_scsi="no"
+ ;;
+ --enable-vhost-scsi) vhost_scsi="yes"
+ ;;
--disable-glx) glx="no"
;;
--enable-glx) glx="yes"
case "$cpu" in
sparc)
LDFLAGS="-m32 $LDFLAGS"
- QEMU_CFLAGS="-m32 -mcpu=ultrasparc $QEMU_CFLAGS"
+ CPU_CFLAGS="-m32 -mcpu=ultrasparc"
;;
sparc64)
LDFLAGS="-m64 $LDFLAGS"
- QEMU_CFLAGS="-m64 -mcpu=ultrasparc $QEMU_CFLAGS"
+ CPU_CFLAGS="-m64 -mcpu=ultrasparc"
;;
s390)
- QEMU_CFLAGS="-m31 -march=z990 $QEMU_CFLAGS"
+ CPU_CFLAGS="-m31 -march=z990"
LDFLAGS="-m31 $LDFLAGS"
;;
s390x)
- QEMU_CFLAGS="-m64 -march=z990 $QEMU_CFLAGS"
+ CPU_CFLAGS="-m64 -march=z990"
LDFLAGS="-m64 $LDFLAGS"
;;
i386)
- QEMU_CFLAGS="-m32 $QEMU_CFLAGS"
+ CPU_CFLAGS="-m32"
LDFLAGS="-m32 $LDFLAGS"
cc_i386='$(CC) -m32'
;;
x86_64)
- QEMU_CFLAGS="-m64 $QEMU_CFLAGS"
+ CPU_CFLAGS="-m64"
LDFLAGS="-m64 $LDFLAGS"
cc_i386='$(CC) -m32'
;;
# No special flags required for other host CPUs
esac
+QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS"
+EXTRA_CFLAGS="$CPU_CFLAGS $EXTRA_CFLAGS"
+
default_target_list=""
-# these targets are portable
-if [ "$softmmu" = "yes" ] ; then
- default_target_list="\
-i386-softmmu \
-x86_64-softmmu \
-alpha-softmmu \
-arm-softmmu \
-cris-softmmu \
-lm32-softmmu \
-m68k-softmmu \
-microblaze-softmmu \
-microblazeel-softmmu \
-mips-softmmu \
-mipsel-softmmu \
-mips64-softmmu \
-mips64el-softmmu \
-moxie-softmmu \
-or32-softmmu \
-ppc-softmmu \
-ppcemb-softmmu \
-ppc64-softmmu \
-sh4-softmmu \
-sh4eb-softmmu \
-sparc-softmmu \
-sparc64-softmmu \
-s390x-softmmu \
-xtensa-softmmu \
-xtensaeb-softmmu \
-unicore32-softmmu \
-"
-fi
-# the following are Linux specific
-if [ "$linux_user" = "yes" ] ; then
- default_target_list="${default_target_list}\
-i386-linux-user \
-x86_64-linux-user \
-alpha-linux-user \
-arm-linux-user \
-armeb-linux-user \
-cris-linux-user \
-m68k-linux-user \
-microblaze-linux-user \
-microblazeel-linux-user \
-mips-linux-user \
-mipsel-linux-user \
-mips64-linux-user \
-mips64el-linux-user \
-mipsn32-linux-user \
-mipsn32el-linux-user \
-or32-linux-user \
-ppc-linux-user \
-ppc64-linux-user \
-ppc64abi32-linux-user \
-sh4-linux-user \
-sh4eb-linux-user \
-sparc-linux-user \
-sparc64-linux-user \
-sparc32plus-linux-user \
-unicore32-linux-user \
-s390x-linux-user \
-"
-fi
-# the following are BSD specific
-if [ "$bsd_user" = "yes" ] ; then
- default_target_list="${default_target_list}\
-i386-bsd-user \
-x86_64-bsd-user \
-sparc-bsd-user \
-sparc64-bsd-user \
-"
+mak_wilds=""
+
+if [ "$softmmu" = "yes" ]; then
+ mak_wilds="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
+fi
+if [ "$linux_user" = "yes" ]; then
+ mak_wilds="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
+fi
+if [ "$bsd_user" = "yes" ]; then
+ mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
fi
+for config in $mak_wilds; do
+ default_target_list="${default_target_list} $(basename "$config" .mak)"
+done
+
if test x"$show_help" = x"yes" ; then
cat << EOF
echo " --bindir=PATH install binaries in PATH"
echo " --libdir=PATH install libraries in PATH"
echo " --sysconfdir=PATH install config in PATH$confsuffix"
-echo " --localstatedir=PATH install local state in PATH"
+echo " --localstatedir=PATH install local state in PATH (set at runtime on win32)"
echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]"
echo " --enable-debug-tcg enable TCG debugging"
echo " --disable-debug-tcg disable TCG debugging (default)"
echo " --enable-cocoa enable Cocoa (default on Mac OS X)"
echo " --audio-drv-list=LIST set audio drivers list:"
echo " Available drivers: $audio_possible_drivers"
-echo " --audio-card-list=LIST set list of emulated audio cards [$audio_card_list]"
-echo " Available cards: $audio_possible_cards"
-echo " --block-drv-whitelist=L set block driver whitelist"
+echo " --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L"
+echo " --block-drv-rw-whitelist=L"
+echo " set block driver read-write whitelist"
+echo " (affects only QEMU, not qemu-img)"
+echo " --block-drv-ro-whitelist=L"
+echo " set block driver read-only whitelist"
echo " (affects only QEMU, not qemu-img)"
echo " --enable-mixemu enable mixer emulation"
echo " --disable-xen disable xen backend driver support"
gcc_flags="-Wold-style-declaration -Wold-style-definition -Wtype-limits"
gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags"
gcc_flags="-Wmissing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
-gcc_flags="-fstack-protector-all -Wendif-labels $gcc_flags"
+gcc_flags="-Wendif-labels $gcc_flags"
gcc_flags="-Wno-initializer-overrides $gcc_flags"
# Note that we do not add -Werror to gcc_flags here, because that would
# enable it for all configure tests. If a configure test failed due
fi
done
+if compile_prog "-Werror -fstack-protector-all" "" ; then
+ QEMU_CFLAGS="$QEMU_CFLAGS -fstack-protector-all"
+ LIBTOOLFLAGS="$LIBTOOLFLAGS -Wc,-fstack-protector-all"
+fi
+
# Workaround for http://gcc.gnu.org/PR55489. Happens with -fPIE/-fPIC and
# large functions that use global variables. The bug is in all releases of
# GCC, but it became particularly acute in 4.6.x and 4.7.x. It is fixed in
fi
fi
-#
+##########################################
+# __sync_fetch_and_and requires at least -march=i486. Many toolchains
+# use i686 as default anyway, but for those that don't, an explicit
+# specification is necessary
+
+if test "$cpu" = "i386"; then
+ cat > $TMPC << EOF
+static int sfaa(int *ptr)
+{
+ return __sync_fetch_and_and(ptr, 0);
+}
+
+int main(void)
+{
+ int val = 42;
+ val = __sync_val_compare_and_swap(&val, 0, 1);
+ sfaa(&val);
+ return val;
+}
+EOF
+ if ! compile_prog "" "" ; then
+ QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS"
+ fi
+fi
+
+#########################################
# Solaris specific configure tool chain decisions
-#
+
if test "$solaris" = "yes" ; then
if has $install; then
:
else
target_list=`echo "$target_list" | sed -e 's/,/ /g'`
fi
+
+# Check that we recognised the target name; this allows a more
+# friendly error message than if we let it fall through.
+for target in $target_list; do
+ case " $default_target_list " in
+ *" $target "*)
+ ;;
+ *)
+ error_exit "Unknown target name '$target'"
+ ;;
+ esac
+done
+
# see if system emulation was really requested
case " $target_list " in
*"-softmmu "*) softmmu=yes
"Make sure to have the zlib libs and headers installed."
fi
fi
+libs_softmmu="$libs_softmmu -lz"
##########################################
# libseccomp check
if test "$seccomp" != "no" ; then
if $pkg_config --atleast-version=1.0.0 libseccomp --modversion >/dev/null 2>&1; then
libs_softmmu="$libs_softmmu `$pkg_config --libs libseccomp`"
+ QEMU_CFLAGS="$QEMU_CFLAGS `$pkg_config --cflags libseccomp`"
seccomp="yes"
else
if test "$seccomp" = "yes"; then
libtool=
fi
+# MacOSX ships with a libtool which isn't the GNU one; weed this
+# out by checking whether libtool supports the --version switch
+if test -n "$libtool"; then
+ if ! "$libtool" --version >/dev/null 2>&1; then
+ libtool=
+ fi
+fi
+
##########################################
# Sparse probe
if test "$sparse" != "no" ; then
##########################################
# uuid_generate() probe, used for vdi block driver
+# Note that on some systems (notably MacOSX) no extra library
+# need be linked to get the uuid functions.
if test "$uuid" != "no" ; then
uuid_libs="-luuid"
cat > $TMPC << EOF
return 0;
}
EOF
- if compile_prog "" "$uuid_libs" ; then
+ if compile_prog "" "" ; then
+ uuid="yes"
+ elif compile_prog "" "$uuid_libs" ; then
uuid="yes"
libs_softmmu="$uuid_libs $libs_softmmu"
libs_tools="$uuid_libs $libs_tools"
##########################################
# curses probe
-if test "$mingw32" = "yes" ; then
- curses_list="-lpdcurses"
-else
- curses_list="-lncurses:-lcurses:$($pkg_config --libs ncurses 2>/dev/null)"
-fi
-
if test "$curses" != "no" ; then
+ if test "$mingw32" = "yes" ; then
+ curses_list="-lpdcurses"
+ else
+ curses_list="$($pkg_config --libs ncurses 2>/dev/null):-lncurses:-lcurses"
+ fi
curses_found=no
cat > $TMPC << EOF
#include <curses.h>
##########################################
# curl probe
-
-if $pkg_config libcurl --modversion >/dev/null 2>&1; then
- curlconfig="$pkg_config libcurl"
-else
- curlconfig=curl-config
-fi
-
if test "$curl" != "no" ; then
+ if $pkg_config libcurl --modversion >/dev/null 2>&1; then
+ curlconfig="$pkg_config libcurl"
+ else
+ curlconfig=curl-config
+ fi
cat > $TMPC << EOF
#include <curl/curl.h>
int main(void) { curl_easy_init(); curl_multi_setopt(0, 0, 0); return 0; }
##########################################
# libssh2 probe
+min_libssh2_version=1.2.8
if test "$libssh2" != "no" ; then
- cat > $TMPC <<EOF
-#include <stdio.h>
-#include <libssh2.h>
-#include <libssh2_sftp.h>
-int main(void) {
- LIBSSH2_SESSION *session;
- session = libssh2_session_init ();
- (void) libssh2_sftp_init (session);
- return 0;
-}
-EOF
-
- if $pkg_config libssh2 --modversion >/dev/null 2>&1; then
+ if $pkg_config --atleast-version=$min_libssh2_version libssh2 >/dev/null 2>&1
+ then
libssh2_cflags=`$pkg_config libssh2 --cflags`
libssh2_libs=`$pkg_config libssh2 --libs`
- else
- libssh2_cflags=
- libssh2_libs="-lssh2"
- fi
-
- if compile_prog "$libssh2_cflags" "$libssh2_libs" ; then
libssh2=yes
libs_tools="$libssh2_libs $libs_tools"
libs_softmmu="$libssh2_libs $libs_softmmu"
QEMU_CFLAGS="$QEMU_CFLAGS $libssh2_cflags"
else
if test "$libssh2" = "yes" ; then
- feature_not_found "libssh2"
+ error_exit "libssh2 >= $min_libssh2_version required for --enable-libssh2"
fi
libssh2=no
fi
##########################################
# fdt probe
+# fdt support is mandatory for at least some target architectures,
+# so insist on it if we're building those system emulators.
+fdt_required=no
+for target in $target_list; do
+ case $target in
+ arm*-softmmu|ppc*-softmmu|microblaze*-softmmu)
+ fdt_required=yes
+ ;;
+ esac
+done
+
+if test "$fdt_required" = "yes"; then
+ if test "$fdt" = "no"; then
+ error_exit "fdt disabled but some requested targets require it." \
+ "You can turn off fdt only if you also disable all the system emulation" \
+ "targets which need it (by specifying a cut down --target-list)."
+ fi
+ fdt=yes
+fi
+
if test "$fdt" != "no" ; then
fdt_libs="-lfdt"
+ # explicitly check for libfdt_env.h as it is missing in some stable installs
cat > $TMPC << EOF
+#include <libfdt_env.h>
int main(void) { return 0; }
EOF
if compile_prog "" "$fdt_libs" ; then
+ # system DTC is good - use it
fdt=yes
- libs_softmmu="$libs_softmmu $fdt_libs"
- else
- if test "$fdt" = "yes" ; then
- feature_not_found "fdt"
+ elif test -d ${source_path}/dtc/libfdt ; then
+ # have submodule DTC - use it
+ fdt=yes
+ dtc_internal="yes"
+ mkdir -p dtc
+ if [ "$source_path" != `pwd` ] ; then
+ symlink "$source_path/dtc/Makefile" "dtc/Makefile"
+ symlink "$source_path/dtc/scripts" "dtc/scripts"
fi
+ fdt_cflags="-I\$(SRC_PATH)/dtc/libfdt"
+ fdt_libs="-L\$(BUILD_DIR)/dtc/libfdt $fdt_libs"
+ elif test "$fdt" = "yes" ; then
+ # have neither and want - prompt for system/submodule install
+ error_exit "DTC not present. Your options:" \
+ " (1) Preferred: Install the DTC devel package" \
+ " (2) Fetch the DTC submodule, using:" \
+ " git submodule update --init dtc"
+ else
+ # don't have and don't want
fdt_libs=
fdt=no
fi
fi
+libs_softmmu="$libs_softmmu $fdt_libs"
+
##########################################
# GLX probe, used by milkymist-tmu2
if test "$glx" != "no" ; then
fi
fi
-#
-# Check for xxxat() functions when we are building linux-user
-# emulator. This is done because older glibc versions don't
-# have syscall stubs for these implemented.
-#
-atfile=no
-cat > $TMPC << EOF
-#define _ATFILE_SOURCE
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-int
-main(void)
-{
- /* try to unlink nonexisting file */
- return (unlinkat(AT_FDCWD, "nonexistent_file", 0));
-}
-EOF
-if compile_prog "" "" ; then
- atfile=yes
-fi
-
# Check for inotify functions when we are building linux-user
# emulator. This is done because older glibc versions don't
# have syscall stubs for these implemented. In that case we
# check for libusb
if test "$libusb" != "no" ; then
- if $pkg_config libusb-1.0 >/dev/null 2>&1 ; then
+ if $pkg_config --atleast-version=1.0.13 libusb-1.0 >/dev/null 2>&1 ; then
libusb="yes"
usb="libusb"
libusb_cflags=$($pkg_config --cflags libusb-1.0 2>/dev/null)
fi
fi
-##########################################
-# __sync_fetch_and_and requires at least -march=i486. Many toolchains
-# use i686 as default anyway, but for those that don't, an explicit
-# specification is necessary
-if test "$vhost_net" = "yes" && test "$cpu" = "i386"; then
- cat > $TMPC << EOF
-static int sfaa(int *ptr)
-{
- return __sync_fetch_and_and(ptr, 0);
-}
-
-int main(void)
-{
- int val = 42;
- sfaa(&val);
- return val;
-}
-EOF
- if ! compile_prog "" "" ; then
- QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS"
- fi
-fi
-
##########################################
# check and set a backend for coroutine
pragma_disable_unused_but_set=no
cat > $TMPC << EOF
+#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-but-set-variable"
#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#pragma GCC diagnostic pop
int main(void) {
return 0;
int main (void) {
a = a + b;
b = a * b;
+ a = a * a;
return 0;
}
EOF
roms="$roms spapr-rtas"
fi
+if test "$cpu" = "s390x" ; then
+ roms="$roms s390-ccw"
+fi
+
# add pixman flags after all config tests are done
-QEMU_CFLAGS="$QEMU_CFLAGS $pixman_cflags"
+QEMU_CFLAGS="$QEMU_CFLAGS $pixman_cflags $fdt_cflags"
libs_softmmu="$libs_softmmu $pixman_libs"
echo "Install prefix $prefix"
echo "libexec directory `eval echo $libexecdir`"
echo "include directory `eval echo $includedir`"
echo "config directory `eval echo $sysconfdir`"
-echo "local state directory `eval echo $local_statedir`"
if test "$mingw32" = "no" ; then
+echo "local state directory `eval echo $local_statedir`"
echo "Manual directory `eval echo $mandir`"
echo "ELF interp prefix $interp_prefix"
+else
+echo "local state directory queried at runtime"
fi
echo "Source path $source_path"
echo "C compiler $cc"
echo "curl support $curl"
echo "mingw32 support $mingw32"
echo "Audio drivers $audio_drv_list"
-echo "Extra audio cards $audio_card_list"
-echo "Block whitelist $block_drv_whitelist"
+echo "Block whitelist (rw) $block_drv_rw_whitelist"
+echo "Block whitelist (ro) $block_drv_ro_whitelist"
echo "Mixer emulation $mixemu"
echo "VirtFS support $virtfs"
echo "VNC support $vnc"
echo "uuid support $uuid"
echo "libcap-ng support $cap_ng"
echo "vhost-net support $vhost_net"
+echo "vhost-scsi support $vhost_scsi"
echo "Trace backend $trace_backend"
echo "Trace output file $trace_file-<pid>"
echo "spice support $spice ($spice_protocol_version/$spice_server_version)"
echo "TPM support $tpm"
echo "libssh2 support $libssh2"
echo "TPM passthrough $tpm_passthrough"
+echo "QOM debugging $qom_cast_debug"
if test "$sdl_too_old" = "yes"; then
echo "-> Your SDL version is too old - please upgrade to have SDL support"
fi
config_host_mak="config-host.mak"
-config_host_ld="config-host.ld"
echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
-echo "qemu_localstatedir=$local_statedir" >> $config_host_mak
+if test "$mingw32" = "no" ; then
+ echo "qemu_localstatedir=$local_statedir" >> $config_host_mak
+fi
echo "qemu_helperdir=$libexecdir" >> $config_host_mak
echo "extra_cflags=$EXTRA_CFLAGS" >> $config_host_mak
echo "extra_ldflags=$EXTRA_LDFLAGS" >> $config_host_mak
echo "qemu_localedir=$qemu_localedir" >> $config_host_mak
+echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
echo "ARCH=$ARCH" >> $config_host_mak
+
+case "$cpu" in
+ arm|i386|x86_64|ppc)
+ # The TCG interpreter currently does not support ld/st optimization.
+ if test "$tcg_interpreter" = "no" ; then
+ echo "CONFIG_QEMU_LDST_OPTIMIZATION=y" >> $config_host_mak
+ fi
+ ;;
+esac
if test "$debug_tcg" = "yes" ; then
echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
fi
if test "$cap_ng" = "yes" ; then
echo "CONFIG_LIBCAP=y" >> $config_host_mak
fi
-for card in $audio_card_list; do
- def=CONFIG_`echo $card | LC_ALL=C tr '[a-z]' '[A-Z]'`
- echo "$def=y" >> $config_host_mak
-done
echo "CONFIG_AUDIO_DRIVERS=$audio_drv_list" >> $config_host_mak
for drv in $audio_drv_list; do
def=CONFIG_`echo $drv | LC_ALL=C tr '[a-z]' '[A-Z]'`
if test "$audio_win_int" = "yes" ; then
echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak
fi
-echo "CONFIG_BDRV_WHITELIST=$block_drv_whitelist" >> $config_host_mak
+echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
+echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
if test "$mixemu" = "yes" ; then
echo "CONFIG_MIXEMU=y" >> $config_host_mak
fi
if test "$curses" = "yes" ; then
echo "CONFIG_CURSES=y" >> $config_host_mak
fi
-if test "$atfile" = "yes" ; then
- echo "CONFIG_ATFILE=y" >> $config_host_mak
-fi
if test "$utimens" = "yes" ; then
echo "CONFIG_UTIMENSAT=y" >> $config_host_mak
fi
if test "$virtfs" = "yes" ; then
echo "CONFIG_VIRTFS=y" >> $config_host_mak
fi
+if test "$vhost_scsi" = "yes" ; then
+ echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
+fi
if test "$blobs" = "yes" ; then
echo "INSTALL_BLOBS=yes" >> $config_host_mak
fi
if test "$glx" = "yes" ; then
echo "CONFIG_GLX=y" >> $config_host_mak
+ echo "GLX_LIBS=$glx_libs" >> $config_host_mak
fi
if test "$libiscsi" = "yes" ; then
if test "$zero_malloc" = "yes" ; then
echo "CONFIG_ZERO_MALLOC=y" >> $config_host_mak
fi
+if test "$qom_cast_debug" = "yes" ; then
+ echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak
+fi
if test "$rbd" = "yes" ; then
echo "CONFIG_RBD=y" >> $config_host_mak
fi
echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak
fi
fi
+if test "$trace_backend" = "ftrace"; then
+ if test "$linux" = "yes" ; then
+ echo "CONFIG_TRACE_FTRACE=y" >> $config_host_mak
+ trace_default=no
+ else
+ feature_not_found "ftrace(trace backend)"
+ fi
+fi
echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
if test "$trace_default" = "yes"; then
echo "CONFIG_TRACE_DEFAULT=y" >> $config_host_mak
fi
+if test "$tcg_interpreter" = "yes"; then
+ QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
+elif test "$ARCH" = "sparc64" ; then
+ QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/sparc $QEMU_INCLUDES"
+elif test "$ARCH" = "s390x" ; then
+ QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/s390 $QEMU_INCLUDES"
+elif test "$ARCH" = "x86_64" ; then
+ QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/i386 $QEMU_INCLUDES"
+else
+ QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/\$(ARCH) $QEMU_INCLUDES"
+fi
+QEMU_INCLUDES="-I\$(SRC_PATH)/tcg $QEMU_INCLUDES"
+
echo "TOOLS=$tools" >> $config_host_mak
echo "ROMS=$roms" >> $config_host_mak
echo "MAKE=$make" >> $config_host_mak
echo "AUTOCONF_HOST := " >> $config_host_mak
fi
echo "LDFLAGS=$LDFLAGS" >> $config_host_mak
+echo "LIBTOOLFLAGS=$LIBTOOLFLAGS" >> $config_host_mak
echo "LIBS+=$LIBS" >> $config_host_mak
echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
echo "EXESUF=$EXESUF" >> $config_host_mak
fi
# generate list of library paths for linker script
-
-$ld --verbose -v 2> /dev/null | grep SEARCH_DIR > ${config_host_ld}
-
-if test -f ${config_host_ld}~ ; then
- if cmp -s $config_host_ld ${config_host_ld}~ ; then
- mv ${config_host_ld}~ $config_host_ld
- else
- rm ${config_host_ld}~
- fi
-fi
+$ld --verbose -v 2> /dev/null | grep SEARCH_DIR > config-host.ld
# use included Linux headers
if test "$linux" = "yes" ; then
s390x)
linux_arch=s390
;;
+ aarch64)
+ linux_arch=arm64
+ ;;
*)
# For most CPUs the kernel architecture name and QEMU CPU name match.
linux_arch="$cpu"
for target in $target_list; do
target_dir="$target"
config_target_mak=$target_dir/config-target.mak
-target_arch2=`echo $target | cut -d '-' -f 1`
+target_name=`echo $target | cut -d '-' -f 1`
target_bigendian="no"
-case "$target_arch2" in
+case "$target_name" in
armeb|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or32|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
target_bigendian=yes
;;
target_linux_user="no"
target_bsd_user="no"
case "$target" in
- ${target_arch2}-softmmu)
+ ${target_name}-softmmu)
target_softmmu="yes"
;;
- ${target_arch2}-linux-user)
+ ${target_name}-linux-user)
if test "$linux" != "yes" ; then
error_exit "Target '$target' is only available on a Linux host"
fi
target_user_only="yes"
target_linux_user="yes"
;;
- ${target_arch2}-bsd-user)
+ ${target_name}-bsd-user)
if test "$bsd" != "yes" ; then
error_exit "Target '$target' is only available on a BSD host"
fi
bflt="no"
target_nptl="no"
-interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_arch2/g"`
+interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_name/g"`
gdb_xml_files=""
-target_short_alignment=2
-target_int_alignment=4
-target_long_alignment=4
-target_llong_alignment=8
-target_libs_softmmu=
-TARGET_ARCH="$target_arch2"
+TARGET_ARCH="$target_name"
TARGET_BASE_ARCH=""
TARGET_ABI_DIR=""
-case "$target_arch2" in
+case "$target_name" in
i386)
;;
x86_64)
TARGET_BASE_ARCH=i386
- target_long_alignment=8
;;
alpha)
- target_long_alignment=8
target_nptl="yes"
;;
arm|armeb)
bflt="yes"
target_nptl="yes"
gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
- target_llong_alignment=4
;;
cris)
target_nptl="yes"
;;
lm32)
- target_libs_softmmu="$glx_libs"
;;
m68k)
bflt="yes"
gdb_xml_files="cf-core.xml cf-fp.xml"
- target_int_alignment=2
- target_long_alignment=2
- target_llong_alignment=2
;;
microblaze|microblazeel)
TARGET_ARCH=microblaze
TARGET_ARCH=mips64
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
- target_long_alignment=8
;;
moxie)
;;
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_long_alignment=8
;;
ppc64abi32)
TARGET_ARCH=ppc64
;;
sparc64)
TARGET_BASE_ARCH=sparc
- target_long_alignment=8
;;
sparc32plus)
TARGET_ARCH=sparc64
;;
s390x)
target_nptl="yes"
- target_long_alignment=8
;;
unicore32)
;;
echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]'
}
-case "$cpu" in
- i386|x86_64|ppc)
- # The TCG interpreter currently does not support ld/st optimization.
- if test "$tcg_interpreter" = "no" ; then
- echo "CONFIG_QEMU_LDST_OPTIMIZATION=y" >> $config_target_mak
- fi
- ;;
-esac
-
-echo "TARGET_SHORT_ALIGNMENT=$target_short_alignment" >> $config_target_mak
-echo "TARGET_INT_ALIGNMENT=$target_int_alignment" >> $config_target_mak
-echo "TARGET_LONG_ALIGNMENT=$target_long_alignment" >> $config_target_mak
-echo "TARGET_LLONG_ALIGNMENT=$target_llong_alignment" >> $config_target_mak
-echo "TARGET_ARCH=$TARGET_ARCH" >> $config_target_mak
target_arch_name="`upper $TARGET_ARCH`"
echo "TARGET_$target_arch_name=y" >> $config_target_mak
-echo "TARGET_ARCH2=$target_arch2" >> $config_target_mak
-echo "TARGET_TYPE=TARGET_TYPE_`upper $target_arch2`" >> $config_target_mak
+echo "TARGET_NAME=$target_name" >> $config_target_mak
echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
if [ "$TARGET_ABI_DIR" = "" ]; then
TARGET_ABI_DIR=$TARGET_ARCH
fi
echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
-case "$target_arch2" in
+case "$target_name" in
i386|x86_64)
if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
echo "CONFIG_XEN=y" >> $config_target_mak
if test "$xen_pci_passthrough" = yes; then
echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
fi
- else
- echo "CONFIG_NO_XEN=y" >> $config_target_mak
fi
;;
*)
- echo "CONFIG_NO_XEN=y" >> $config_target_mak
esac
-case "$target_arch2" in
+case "$target_name" in
arm|i386|x86_64|ppcemb|ppc|ppc64|s390x)
# Make sure the target and host cpus are compatible
if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
- \( "$target_arch2" = "$cpu" -o \
- \( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc" \) -o \
- \( "$target_arch2" = "ppc64" -a "$cpu" = "ppc" \) -o \
- \( "$target_arch2" = "ppc" -a "$cpu" = "ppc64" \) -o \
- \( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc64" \) -o \
- \( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \
- \( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then
+ \( "$target_name" = "$cpu" -o \
+ \( "$target_name" = "ppcemb" -a "$cpu" = "ppc" \) -o \
+ \( "$target_name" = "ppc64" -a "$cpu" = "ppc" \) -o \
+ \( "$target_name" = "ppc" -a "$cpu" = "ppc64" \) -o \
+ \( "$target_name" = "ppcemb" -a "$cpu" = "ppc64" \) -o \
+ \( "$target_name" = "x86_64" -a "$cpu" = "i386" \) -o \
+ \( "$target_name" = "i386" -a "$cpu" = "x86_64" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
if test "$vhost_net" = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
fi
esac
-case "$target_arch2" in
- i386|x86_64)
- echo "CONFIG_HAVE_GET_MEMORY_MAPPING=y" >> $config_target_mak
-esac
if test "$target_bigendian" = "yes" ; then
echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
fi
if test "$target_softmmu" = "yes" ; then
echo "CONFIG_SOFTMMU=y" >> $config_target_mak
- echo "LIBS+=$libs_softmmu $target_libs_softmmu" >> $config_target_mak
- case "$target_arch2" in
- i386|x86_64)
- echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak
- esac
fi
if test "$target_user_only" = "yes" ; then
echo "CONFIG_USER_ONLY=y" >> $config_target_mak
echo "CONFIG_BSD_USER=y" >> $config_target_mak
fi
-# the static way of configuring available audio cards requires this workaround
-if test "$target_user_only" != "yes" && grep -q CONFIG_PCSPK $source_path/default-configs/$target.mak; then
- echo "CONFIG_PCSPK=y" >> $config_target_mak
-fi
-
# generate QEMU_CFLAGS/LDFLAGS for targets
cflags=""
-includes=""
ldflags=""
-if test "$tcg_interpreter" = "yes"; then
- includes="-I\$(SRC_PATH)/tcg/tci $includes"
-elif test "$ARCH" = "sparc64" ; then
- includes="-I\$(SRC_PATH)/tcg/sparc $includes"
-elif test "$ARCH" = "s390x" ; then
- includes="-I\$(SRC_PATH)/tcg/s390 $includes"
-elif test "$ARCH" = "x86_64" ; then
- includes="-I\$(SRC_PATH)/tcg/i386 $includes"
-else
- includes="-I\$(SRC_PATH)/tcg/\$(ARCH) $includes"
-fi
-includes="-I\$(SRC_PATH)/tcg $includes"
-
for i in $ARCH $TARGET_BASE_ARCH ; do
case "$i" in
alpha)
;;
esac
-if test "$target_softmmu" = "yes" ; then
- case "$TARGET_BASE_ARCH" in
- arm)
- cflags="-DHAS_AUDIO $cflags"
- ;;
- lm32)
- cflags="-DHAS_AUDIO $cflags"
- ;;
- i386|mips|ppc)
- cflags="-DHAS_AUDIO -DHAS_AUDIO_CHOICE $cflags"
- ;;
- esac
-fi
-
if test "$gprof" = "yes" ; then
echo "TARGET_GPROF=yes" >> $config_target_mak
if test "$target_linux_user" = "yes" ; then
if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
case "$ARCH" in
- alpha | s390x)
+ alpha | s390x | aarch64)
# The default placement of the application is fine.
;;
*)
echo "LDFLAGS+=$ldflags" >> $config_target_mak
echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
-echo "QEMU_INCLUDES+=$includes" >> $config_target_mak
done # for target in $targets
echo "config-host.h: subdir-pixman" >> $config_host_mak
fi
+if [ "$dtc_internal" = "yes" ]; then
+ echo "config-host.h: subdir-dtc" >> $config_host_mak
+fi
+
# build tree in object directory in case the source is not in the current directory
-DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32"
-DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas"
+DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos"
+DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
DIRS="$DIRS roms/seabios roms/vgabios"
DIRS="$DIRS qapi-generated"
FILES="Makefile tests/tcg/Makefile qdict-test-data.txt"
FILES="$FILES tests/tcg/lm32/Makefile po/Makefile"
FILES="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps"
FILES="$FILES pc-bios/spapr-rtas/Makefile"
+FILES="$FILES pc-bios/s390-ccw/Makefile"
FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
FILES="$FILES pc-bios/qemu-icon.bmp"
for bios_file in \
$source_path/pc-bios/*.aml \
$source_path/pc-bios/*.rom \
$source_path/pc-bios/*.dtb \
+ $source_path/pc-bios/*.img \
$source_path/pc-bios/openbios-* \
$source_path/pc-bios/palcode-*
do
projects / qemu.git / blobdiff