# -*- Mode: Python -*-
+# vim: filetype=python
#
##
# = Remote desktop
##
+{ 'include': 'common.json' }
{ 'include': 'sockets.json' }
##
-# @set_password:
+# @DisplayProtocol:
+#
+# Display protocols which support changing password options.
+#
+# Since: 7.0
+#
+##
+{ 'enum': 'DisplayProtocol',
+ 'data': [ 'vnc', 'spice' ] }
+
+##
+# @SetPasswordAction:
+#
+# An action to take on changing a password on a connection with active clients.
+#
+# @keep: maintain existing clients
+#
+# @fail: fail the command if clients are connected
+#
+# @disconnect: disconnect existing clients
#
-# Sets the password of a remote display session.
+# Since: 7.0
#
-# @protocol: `vnc' to modify the VNC server password
-# `spice' to modify the Spice server password
+##
+{ 'enum': 'SetPasswordAction',
+ 'data': [ 'keep', 'fail', 'disconnect' ] }
+
+##
+# @SetPasswordOptions:
+#
+# Options for set_password.
+#
+# @protocol: - 'vnc' to modify the VNC server password
+# - 'spice' to modify the Spice server password
#
# @password: the new password
#
-# @connected: how to handle existing clients when changing the
-# password. If nothing is specified, defaults to `keep'
-# `fail' to fail the command if clients are connected
-# `disconnect' to disconnect existing clients
-# `keep' to maintain existing clients
+# @connected: How to handle existing clients when changing the
+# password. If nothing is specified, defaults to 'keep'.
+# For VNC, only 'keep' is currently implemented.
#
-# Returns: Nothing on success
-# If Spice is not enabled, DeviceNotFound
+# Since: 7.0
+#
+##
+{ 'union': 'SetPasswordOptions',
+ 'base': { 'protocol': 'DisplayProtocol',
+ 'password': 'str',
+ '*connected': 'SetPasswordAction' },
+ 'discriminator': 'protocol',
+ 'data': { 'vnc': 'SetPasswordOptionsVnc' } }
+
+##
+# @SetPasswordOptionsVnc:
+#
+# Options for set_password specific to the VNC procotol.
#
-# Since: 0.14.0
+# @display: The id of the display where the password should be changed.
+# Defaults to the first.
+#
+# Since: 7.0
+#
+##
+{ 'struct': 'SetPasswordOptionsVnc',
+ 'data': { '*display': 'str' } }
+
+##
+# @set_password:
+#
+# Set the password of a remote display server.
+#
+# Returns: - Nothing on success
+# - If Spice is not enabled, DeviceNotFound
+#
+# Since: 0.14
#
# Example:
#
# <- { "return": {} }
#
##
-{ 'command': 'set_password',
- 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
+{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' }
##
-# @expire_password:
+# @ExpirePasswordOptions:
#
-# Expire the password of a remote display server.
+# General options for expire_password.
#
-# @protocol: the name of the remote display protocol `vnc' or `spice'
+# @protocol: - 'vnc' to modify the VNC server expiration
+# - 'spice' to modify the Spice server expiration
#
# @time: when to expire the password.
-# `now' to expire the password immediately
-# `never' to cancel password expiration
-# `+INT' where INT is the number of seconds from now (integer)
-# `INT' where INT is the absolute time in seconds
#
-# Returns: Nothing on success
-# If @protocol is `spice' and Spice is not active, DeviceNotFound
-#
-# Since: 0.14.0
+# - 'now' to expire the password immediately
+# - 'never' to cancel password expiration
+# - '+INT' where INT is the number of seconds from now (integer)
+# - 'INT' where INT is the absolute time in seconds
#
# Notes: Time is relative to the server and currently there is no way to
# coordinate server time with client time. It is not recommended to
# use the absolute time version of the @time parameter unless you're
# sure you are on the same machine as the QEMU instance.
#
+# Since: 7.0
+#
+##
+{ 'union': 'ExpirePasswordOptions',
+ 'base': { 'protocol': 'DisplayProtocol',
+ 'time': 'str' },
+ 'discriminator': 'protocol',
+ 'data': { 'vnc': 'ExpirePasswordOptionsVnc' } }
+
+##
+# @ExpirePasswordOptionsVnc:
+#
+# Options for expire_password specific to the VNC procotol.
+#
+# @display: The id of the display where the expiration should be changed.
+# Defaults to the first.
+#
+# Since: 7.0
+#
+##
+
+{ 'struct': 'ExpirePasswordOptionsVnc',
+ 'data': { '*display': 'str' } }
+
+##
+# @expire_password:
+#
+# Expire the password of a remote display server.
+#
+# Returns: - Nothing on success
+# - If @protocol is 'spice' and Spice is not active, DeviceNotFound
+#
+# Since: 0.14
+#
# Example:
#
# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
# <- { "return": {} }
#
##
-{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
+{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' }
##
# @screendump:
#
# Returns: Nothing on success
#
-# Since: 0.14.0
+# Since: 0.14
#
# Example:
#
#
##
{ 'command': 'screendump',
- 'data': {'filename': 'str', '*device': 'str', '*head': 'int'} }
+ 'data': {'filename': 'str', '*device': 'str', '*head': 'int'},
+ 'coroutine': true }
##
# == Spice
'data': { 'host': 'str',
'port': 'str',
'family': 'NetworkAddressFamily' },
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# @SpiceServerInfo:
{ 'struct': 'SpiceServerInfo',
'base': 'SpiceBasicInfo',
'data': { '*auth': 'str' },
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# @SpiceChannel:
#
# @tls: true if the channel is encrypted, false otherwise.
#
-# Since: 0.14.0
+# Since: 0.14
##
{ 'struct': 'SpiceChannel',
'base': 'SpiceBasicInfo',
'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
'tls': 'bool'},
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# @SpiceQueryMouseMode:
##
{ 'enum': 'SpiceQueryMouseMode',
'data': [ 'client', 'server', 'unknown' ],
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# @SpiceInfo:
# @tls-port: The SPICE server's TLS port number.
#
# @auth: the current authentication type used by the server
-# 'none' if no authentication is being used
-# 'spice' uses SASL or direct TLS authentication, depending on command
-# line options
+#
+# - 'none' if no authentication is being used
+# - 'spice' uses SASL or direct TLS authentication, depending on command
+# line options
#
# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
# be determined by the client or the server, or unknown if spice
#
# @channels: a list of @SpiceChannel for each active spice channel
#
-# Since: 0.14.0
+# Since: 0.14
##
{ 'struct': 'SpiceInfo',
'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int',
'*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']},
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# @query-spice:
#
# Returns: @SpiceInfo
#
-# Since: 0.14.0
+# Since: 0.14
#
# Example:
#
#
##
{ 'command': 'query-spice', 'returns': 'SpiceInfo',
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# @SPICE_CONNECTED:
#
# @client: client information
#
-# Since: 0.14.0
+# Since: 0.14
#
# Example:
#
{ 'event': 'SPICE_CONNECTED',
'data': { 'server': 'SpiceBasicInfo',
'client': 'SpiceBasicInfo' },
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# @SPICE_INITIALIZED:
#
# @client: client information
#
-# Since: 0.14.0
+# Since: 0.14
#
# Example:
#
{ 'event': 'SPICE_INITIALIZED',
'data': { 'server': 'SpiceServerInfo',
'client': 'SpiceChannel' },
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# @SPICE_DISCONNECTED:
#
# @client: client information
#
-# Since: 0.14.0
+# Since: 0.14
#
# Example:
#
{ 'event': 'SPICE_DISCONNECTED',
'data': { 'server': 'SpiceBasicInfo',
'client': 'SpiceBasicInfo' },
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# @SPICE_MIGRATE_COMPLETED:
#
##
{ 'event': 'SPICE_MIGRATE_COMPLETED',
- 'if': 'defined(CONFIG_SPICE)' }
+ 'if': 'CONFIG_SPICE' }
##
# == VNC
'service': 'str',
'family': 'NetworkAddressFamily',
'websocket': 'bool' },
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VncServerInfo:
{ 'struct': 'VncServerInfo',
'base': 'VncBasicInfo',
'data': { '*auth': 'str' },
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VncClientInfo:
# @sasl_username: If SASL authentication is in use, the SASL username
# used for authentication.
#
-# Since: 0.14.0
+# Since: 0.14
##
{ 'struct': 'VncClientInfo',
'base': 'VncBasicInfo',
'data': { '*x509_dname': 'str', '*sasl_username': 'str' },
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VncInfo:
# @host: The hostname the VNC server is bound to. This depends on
# the name resolution on the host and may be an IP address.
#
-# @family: 'ipv6' if the host is listening for IPv6 connections
-# 'ipv4' if the host is listening for IPv4 connections
-# 'unix' if the host is listening on a unix domain socket
-# 'unknown' otherwise
+# @family: - 'ipv6' if the host is listening for IPv6 connections
+# - 'ipv4' if the host is listening for IPv4 connections
+# - 'unix' if the host is listening on a unix domain socket
+# - 'unknown' otherwise
#
# @service: The service name of the server's port. This may depends
# on the host system's service database so symbolic names should not
# be relied on.
#
# @auth: the current authentication type used by the server
-# 'none' if no authentication is being used
-# 'vnc' if VNC authentication is being used
-# 'vencrypt+plain' if VEncrypt is used with plain text authentication
-# 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
-# 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
-# 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
-# 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
-# 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
-# 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
-# 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
-# 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
+#
+# - 'none' if no authentication is being used
+# - 'vnc' if VNC authentication is being used
+# - 'vencrypt+plain' if VEncrypt is used with plain text authentication
+# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
+# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
+# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
+# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
+# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
+# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
+# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
+# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
#
# @clients: a list of @VncClientInfo of all currently connected clients
#
-# Since: 0.14.0
+# Since: 0.14
##
{ 'struct': 'VncInfo',
'data': {'enabled': 'bool', '*host': 'str',
'*family': 'NetworkAddressFamily',
'*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']},
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VncPrimaryAuth:
{ 'enum': 'VncPrimaryAuth',
'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
'tls', 'vencrypt', 'sasl' ],
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VncVencryptSubAuth:
'tls-vnc', 'x509-vnc',
'tls-plain', 'x509-plain',
'tls-sasl', 'x509-sasl' ],
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VncServerInfo2:
'base': 'VncBasicInfo',
'data': { 'auth' : 'VncPrimaryAuth',
'*vencrypt' : 'VncVencryptSubAuth' },
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VncInfo2:
'auth' : 'VncPrimaryAuth',
'*vencrypt' : 'VncVencryptSubAuth',
'*display' : 'str' },
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @query-vnc:
#
# Returns: @VncInfo
#
-# Since: 0.14.0
+# Since: 0.14
#
# Example:
#
#
##
{ 'command': 'query-vnc', 'returns': 'VncInfo',
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @query-vnc-servers:
#
# Since: 2.3
##
{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'],
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @change-vnc-password:
##
{ 'command': 'change-vnc-password',
'data': { 'password': 'str' },
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VNC_CONNECTED:
# Note: This event is emitted before any authentication takes place, thus
# the authentication ID is not provided
#
-# Since: 0.13.0
+# Since: 0.13
#
# Example:
#
# <- { "event": "VNC_CONNECTED",
# "data": {
-# "server": { "auth": "sasl", "family": "ipv4",
+# "server": { "auth": "sasl", "family": "ipv4", "websocket": false,
# "service": "5901", "host": "0.0.0.0" },
# "client": { "family": "ipv4", "service": "58425",
-# "host": "127.0.0.1" } },
+# "host": "127.0.0.1", "websocket": false } },
# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
#
##
{ 'event': 'VNC_CONNECTED',
'data': { 'server': 'VncServerInfo',
'client': 'VncBasicInfo' },
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VNC_INITIALIZED:
#
# @client: client information
#
-# Since: 0.13.0
+# Since: 0.13
#
# Example:
#
# <- { "event": "VNC_INITIALIZED",
# "data": {
-# "server": { "auth": "sasl", "family": "ipv4",
+# "server": { "auth": "sasl", "family": "ipv4", "websocket": false,
# "service": "5901", "host": "0.0.0.0"},
-# "client": { "family": "ipv4", "service": "46089",
+# "client": { "family": "ipv4", "service": "46089", "websocket": false,
# "host": "127.0.0.1", "sasl_username": "luiz" } },
# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
#
{ 'event': 'VNC_INITIALIZED',
'data': { 'server': 'VncServerInfo',
'client': 'VncClientInfo' },
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# @VNC_DISCONNECTED:
#
# @client: client information
#
-# Since: 0.13.0
+# Since: 0.13
#
# Example:
#
# <- { "event": "VNC_DISCONNECTED",
# "data": {
-# "server": { "auth": "sasl", "family": "ipv4",
+# "server": { "auth": "sasl", "family": "ipv4", "websocket": false,
# "service": "5901", "host": "0.0.0.0" },
-# "client": { "family": "ipv4", "service": "58425",
+# "client": { "family": "ipv4", "service": "58425", "websocket": false,
# "host": "127.0.0.1", "sasl_username": "luiz" } },
# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
#
{ 'event': 'VNC_DISCONNECTED',
'data': { 'server': 'VncServerInfo',
'client': 'VncClientInfo' },
- 'if': 'defined(CONFIG_VNC)' }
+ 'if': 'CONFIG_VNC' }
##
# = Input
#
# @absolute: true if this device supports absolute coordinates as input
#
-# Since: 0.14.0
+# Since: 0.14
##
{ 'struct': 'MouseInfo',
'data': {'name': 'str', 'index': 'int', 'current': 'bool',
#
# Returns: a list of @MouseInfo for each device
#
-# Since: 0.14.0
+# Since: 0.14
#
# Example:
#
# @ac_forward: since 2.10
# @ac_refresh: since 2.10
# @ac_bookmarks: since 2.10
-# altgr, altgr_r: dropped in 2.10
#
# @muhenkan: since 2.12
# @katakanahiragana: since 2.12
#
+# @lang1: since 6.1
+# @lang2: since 6.1
+#
# 'sysrq' was mistakenly added to hack around the fact that
# the ps2 driver was not generating correct scancodes sequences
# when 'alt+print' was pressed. This flaw is now fixed and the
# 'sysrq' will be transparently changed to 'print', so they
# are effectively synonyms.
#
-# Since: 1.3.0
+# Since: 1.3
#
##
{ 'enum': 'QKeyCode',
'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute',
'volumeup', 'volumedown', 'mediaselect',
'mail', 'calculator', 'computer',
- 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] }
+ 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks',
+ 'lang1', 'lang2' ] }
+
+##
+# @KeyValueKind:
+#
+# Since: 1.3
+##
+{ 'enum': 'KeyValueKind',
+ 'data': [ 'number', 'qcode' ] }
+
+##
+# @IntWrapper:
+#
+# Since: 1.3
+##
+{ 'struct': 'IntWrapper',
+ 'data': { 'data': 'int' } }
+
+##
+# @QKeyCodeWrapper:
+#
+# Since: 1.3
+##
+{ 'struct': 'QKeyCodeWrapper',
+ 'data': { 'data': 'QKeyCode' } }
##
# @KeyValue:
#
# Represents a keyboard key.
#
-# Since: 1.3.0
+# Since: 1.3
##
{ 'union': 'KeyValue',
+ 'base': { 'type': 'KeyValueKind' },
+ 'discriminator': 'type',
'data': {
- 'number': 'int',
- 'qcode': 'QKeyCode' } }
+ 'number': 'IntWrapper',
+ 'qcode': 'QKeyCodeWrapper' } }
##
# @send-key:
# @hold-time: time to delay key up events, milliseconds. Defaults
# to 100
#
-# Returns: Nothing on success
-# If key is unknown or redundant, InvalidParameter
+# Returns: - Nothing on success
+# - If key is unknown or redundant, InvalidParameter
#
-# Since: 1.3.0
+# Since: 1.3
#
# Example:
#
##
{ 'enum' : 'InputButton',
'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side',
- 'extra' ] }
+ 'extra', 'wheel-left', 'wheel-right' ] }
##
# @InputAxis:
'data' : { 'axis' : 'InputAxis',
'value' : 'int' } }
+##
+# @InputEventKind:
+#
+# Since: 2.0
+##
+{ 'enum': 'InputEventKind',
+ 'data': [ 'key', 'btn', 'rel', 'abs' ] }
+
+##
+# @InputKeyEventWrapper:
+#
+# Since: 2.0
+##
+{ 'struct': 'InputKeyEventWrapper',
+ 'data': { 'data': 'InputKeyEvent' } }
+
+##
+# @InputBtnEventWrapper:
+#
+# Since: 2.0
+##
+{ 'struct': 'InputBtnEventWrapper',
+ 'data': { 'data': 'InputBtnEvent' } }
+
+##
+# @InputMoveEventWrapper:
+#
+# Since: 2.0
+##
+{ 'struct': 'InputMoveEventWrapper',
+ 'data': { 'data': 'InputMoveEvent' } }
+
##
# @InputEvent:
#
# Input event union.
#
# @type: the input type, one of:
+#
# - 'key': Input event of Keyboard
# - 'btn': Input event of pointer buttons
# - 'rel': Input event of relative pointer motion
# Since: 2.0
##
{ 'union' : 'InputEvent',
- 'data' : { 'key' : 'InputKeyEvent',
- 'btn' : 'InputBtnEvent',
- 'rel' : 'InputMoveEvent',
- 'abs' : 'InputMoveEvent' } }
+ 'base': { 'type': 'InputEventKind' },
+ 'discriminator': 'type',
+ 'data' : { 'key' : 'InputKeyEventWrapper',
+ 'btn' : 'InputBtnEventWrapper',
+ 'rel' : 'InputMoveEventWrapper',
+ 'abs' : 'InputMoveEventWrapper' } }
##
# @input-send-event:
#
# Send input event(s) to guest.
#
-# @device: display device to send event(s) to.
-# @head: head to send event(s) to, in case the
-# display device supports multiple scanouts.
-# @events: List of InputEvent union.
-#
-# Returns: Nothing on success.
-#
# The @device and @head parameters can be used to send the input event
# to specific input devices in case (a) multiple input devices of the
# same kind are added to the virtual machine and (b) you have
# are admissible, but devices with input routing config take
# precedence.
#
+# @device: display device to send event(s) to.
+# @head: head to send event(s) to, in case the
+# display device supports multiple scanouts.
+# @events: List of InputEvent union.
+#
+# Returns: Nothing on success.
+#
# Since: 2.6
#
# Note: The consoles are visible in the qom tree, under
'*head' : 'int',
'events' : [ 'InputEvent' ] } }
-##
-# @GrabToggleKeys:
-#
-# Keys to toggle input-linux between host and guest.
-#
-# Since: 4.0
-#
-##
-{ 'enum': 'GrabToggleKeys',
- 'data': [ 'ctrl-ctrl', 'alt-alt', 'shift-shift','meta-meta', 'scrolllock',
- 'ctrl-scrolllock' ] }
-
##
# @DisplayGTK:
#
{ 'struct' : 'DisplayEGLHeadless',
'data' : { '*rendernode' : 'str' } }
+##
+# @DisplayDBus:
+#
+# DBus display options.
+#
+# @addr: The D-Bus bus address (default to the session bus).
+#
+# @rendernode: Which DRM render node should be used. Default is the first
+# available node on the host.
+#
+# @p2p: Whether to use peer-to-peer connections (accepted through
+# ``add_client``).
+#
+# @audiodev: Use the specified DBus audiodev to export audio.
+#
+# Since: 7.0
+#
+##
+{ 'struct' : 'DisplayDBus',
+ 'data' : { '*rendernode' : 'str',
+ '*addr': 'str',
+ '*p2p': 'bool',
+ '*audiodev': 'str' } }
+
##
# @DisplayGLMode:
#
# Since: 3.0
#
##
- { 'enum' : 'DisplayGLMode',
- 'data' : [ 'off', 'on', 'core', 'es' ] }
+{ 'enum' : 'DisplayGLMode',
+ 'data' : [ 'off', 'on', 'core', 'es' ] }
##
# @DisplayCurses:
{ 'struct' : 'DisplayCurses',
'data' : { '*charset' : 'str' } }
+##
+# @DisplayCocoa:
+#
+# Cocoa display options.
+#
+# @left-command-key: Enable/disable forwarding of left command key to
+# guest. Allows command-tab window switching on the
+# host without sending this key to the guest when
+# "off". Defaults to "on"
+#
+# @full-grab: Capture all key presses, including system combos. This
+# requires accessibility permissions, since it performs
+# a global grab on key events. (default: off)
+# See https://support.apple.com/en-in/guide/mac-help/mh32356/mac
+#
+# @swap-opt-cmd: Swap the Option and Command keys so that their key codes match
+# their position on non-Mac keyboards and you can use Meta/Super
+# and Alt where you expect them. (default: off)
+#
+# Since: 7.0
+##
+{ 'struct': 'DisplayCocoa',
+ 'data': {
+ '*left-command-key': 'bool',
+ '*full-grab': 'bool',
+ '*swap-opt-cmd': 'bool'
+ } }
+
##
# @DisplayType:
#
# application to connect to it. The server will redirect
# the serial console and QEMU monitors. (Since 4.0)
#
+# @dbus: Start a D-Bus service for the display. (Since 7.0)
+#
# Since: 2.12
#
##
{ 'enum' : 'DisplayType',
- 'data' : [ 'default', 'none', 'gtk', 'sdl',
- 'egl-headless', 'curses', 'cocoa',
- 'spice-app'] }
+ 'data' : [
+ { 'name': 'default' },
+ { 'name': 'none' },
+ { 'name': 'gtk', 'if': 'CONFIG_GTK' },
+ { 'name': 'sdl', 'if': 'CONFIG_SDL' },
+ { 'name': 'egl-headless',
+ 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } },
+ { 'name': 'curses', 'if': 'CONFIG_CURSES' },
+ { 'name': 'cocoa', 'if': 'CONFIG_COCOA' },
+ { 'name': 'spice-app', 'if': 'CONFIG_SPICE' },
+ { 'name': 'dbus', 'if': 'CONFIG_DBUS_DISPLAY' }
+ ]
+}
##
# @DisplayOptions:
'*show-cursor' : 'bool',
'*gl' : 'DisplayGLMode' },
'discriminator' : 'type',
- 'data' : { 'gtk' : 'DisplayGTK',
- 'curses' : 'DisplayCurses',
- 'egl-headless' : 'DisplayEGLHeadless'} }
+ 'data' : {
+ 'gtk': { 'type': 'DisplayGTK', 'if': 'CONFIG_GTK' },
+ 'cocoa': { 'type': 'DisplayCocoa', 'if': 'CONFIG_COCOA' },
+ 'curses': { 'type': 'DisplayCurses', 'if': 'CONFIG_CURSES' },
+ 'egl-headless': { 'type': 'DisplayEGLHeadless',
+ 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } },
+ 'dbus': { 'type': 'DisplayDBus', 'if': 'CONFIG_DBUS_DISPLAY' }
+ }
+}
##
# @query-display-options:
##
{ 'command': 'query-display-options',
'returns': 'DisplayOptions' }
+
+##
+# @DisplayReloadType:
+#
+# Available DisplayReload types.
+#
+# @vnc: VNC display
+#
+# Since: 6.0
+#
+##
+{ 'enum': 'DisplayReloadType',
+ 'data': ['vnc'] }
+
+##
+# @DisplayReloadOptionsVNC:
+#
+# Specify the VNC reload options.
+#
+# @tls-certs: reload tls certs or not.
+#
+# Since: 6.0
+#
+##
+{ 'struct': 'DisplayReloadOptionsVNC',
+ 'data': { '*tls-certs': 'bool' } }
+
+##
+# @DisplayReloadOptions:
+#
+# Options of the display configuration reload.
+#
+# @type: Specify the display type.
+#
+# Since: 6.0
+#
+##
+{ 'union': 'DisplayReloadOptions',
+ 'base': {'type': 'DisplayReloadType'},
+ 'discriminator': 'type',
+ 'data': { 'vnc': 'DisplayReloadOptionsVNC' } }
+
+##
+# @display-reload:
+#
+# Reload display configuration.
+#
+# Returns: Nothing on success.
+#
+# Since: 6.0
+#
+# Example:
+#
+# -> { "execute": "display-reload",
+# "arguments": { "type": "vnc", "tls-certs": true } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'display-reload',
+ 'data': 'DisplayReloadOptions',
+ 'boxed' : true }
projects / qemu.git / blobdiff