*/
#include "qemu/osdep.h"
+#include "qemu/error-report.h"
#include "qapi/error.h"
#include "hw/hw.h"
#include "sysemu/block-backend.h"
#include "qemu/bitops.h"
#include "hw/sd/sdhci.h"
#include "sdhci-internal.h"
-#include "qapi/error.h"
#include "qemu/log.h"
+#include "qemu/cutils.h"
#include "trace.h"
#define TYPE_SDHCI_BUS "sdhci-bus"
#define SDHCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SDHCI_BUS)
+#define MASKED_WRITE(reg, mask, val) (reg = (reg & (mask)) | (val))
+
/* Default SD/MMC host controller features information, which will be
* presented in CAPABILITIES register of generic SD host controller at reset.
- * If not stated otherwise:
- * 0 - not supported, 1 - supported, other - prohibited.
+ *
+ * support:
+ * - 3.3v and 1.8v voltages
+ * - SDMA/ADMA1/ADMA2
+ * - high-speed
+ * max host controller R/W buffers size: 512B
+ * max clock frequency for SDclock: 52 MHz
+ * timeout clock frequency: 52 MHz
+ *
+ * does not support:
+ * - 3.0v voltage
+ * - 64-bit system bus
+ * - suspend/resume
*/
-#define SDHC_CAPAB_64BITBUS 0ul /* 64-bit System Bus Support */
-#define SDHC_CAPAB_18V 1ul /* Voltage support 1.8v */
-#define SDHC_CAPAB_30V 0ul /* Voltage support 3.0v */
-#define SDHC_CAPAB_33V 1ul /* Voltage support 3.3v */
-#define SDHC_CAPAB_SUSPRESUME 0ul /* Suspend/resume support */
-#define SDHC_CAPAB_SDMA 1ul /* SDMA support */
-#define SDHC_CAPAB_HIGHSPEED 1ul /* High speed support */
-#define SDHC_CAPAB_ADMA1 1ul /* ADMA1 support */
-#define SDHC_CAPAB_ADMA2 1ul /* ADMA2 support */
-/* Maximum host controller R/W buffers size
- * Possible values: 512, 1024, 2048 bytes */
-#define SDHC_CAPAB_MAXBLOCKLENGTH 512ul
-/* Maximum clock frequency for SDclock in MHz
- * value in range 10-63 MHz, 0 - not defined */
-#define SDHC_CAPAB_BASECLKFREQ 52ul
-#define SDHC_CAPAB_TOUNIT 1ul /* Timeout clock unit 0 - kHz, 1 - MHz */
-/* Timeout clock frequency 1-63, 0 - not defined */
-#define SDHC_CAPAB_TOCLKFREQ 52ul
-
-/* Now check all parameters and calculate CAPABILITIES REGISTER value */
-#if SDHC_CAPAB_64BITBUS > 1 || SDHC_CAPAB_18V > 1 || SDHC_CAPAB_30V > 1 || \
- SDHC_CAPAB_33V > 1 || SDHC_CAPAB_SUSPRESUME > 1 || SDHC_CAPAB_SDMA > 1 || \
- SDHC_CAPAB_HIGHSPEED > 1 || SDHC_CAPAB_ADMA2 > 1 || SDHC_CAPAB_ADMA1 > 1 ||\
- SDHC_CAPAB_TOUNIT > 1
-#error Capabilities features can have value 0 or 1 only!
-#endif
-
-#if SDHC_CAPAB_MAXBLOCKLENGTH == 512
-#define MAX_BLOCK_LENGTH 0ul
-#elif SDHC_CAPAB_MAXBLOCKLENGTH == 1024
-#define MAX_BLOCK_LENGTH 1ul
-#elif SDHC_CAPAB_MAXBLOCKLENGTH == 2048
-#define MAX_BLOCK_LENGTH 2ul
-#else
-#error Max host controller block size can have value 512, 1024 or 2048 only!
-#endif
-
-#if (SDHC_CAPAB_BASECLKFREQ > 0 && SDHC_CAPAB_BASECLKFREQ < 10) || \
- SDHC_CAPAB_BASECLKFREQ > 63
-#error SDclock frequency can have value in range 0, 10-63 only!
-#endif
-
-#if SDHC_CAPAB_TOCLKFREQ > 63
-#error Timeout clock frequency can have value in range 0-63 only!
-#endif
-
-#define SDHC_CAPAB_REG_DEFAULT \
- ((SDHC_CAPAB_64BITBUS << 28) | (SDHC_CAPAB_18V << 26) | \
- (SDHC_CAPAB_30V << 25) | (SDHC_CAPAB_33V << 24) | \
- (SDHC_CAPAB_SUSPRESUME << 23) | (SDHC_CAPAB_SDMA << 22) | \
- (SDHC_CAPAB_HIGHSPEED << 21) | (SDHC_CAPAB_ADMA1 << 20) | \
- (SDHC_CAPAB_ADMA2 << 19) | (MAX_BLOCK_LENGTH << 16) | \
- (SDHC_CAPAB_BASECLKFREQ << 8) | (SDHC_CAPAB_TOUNIT << 7) | \
- (SDHC_CAPAB_TOCLKFREQ))
+#define SDHC_CAPAB_REG_DEFAULT 0x057834b4
-#define MASKED_WRITE(reg, mask, val) (reg = (reg & (mask)) | (val))
+static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
+{
+ return 1 << (9 + FIELD_EX32(s->capareg, SDHC_CAPAB, MAXBLOCKLENGTH));
+}
+
+/* return true on error */
+static bool sdhci_check_capab_freq_range(SDHCIState *s, const char *desc,
+ uint8_t freq, Error **errp)
+{
+ if (s->sd_spec_version >= 3) {
+ return false;
+ }
+ switch (freq) {
+ case 0:
+ case 10 ... 63:
+ break;
+ default:
+ error_setg(errp, "SD %s clock frequency can have value"
+ "in range 0-63 only", desc);
+ return true;
+ }
+ return false;
+}
+
+static void sdhci_check_capareg(SDHCIState *s, Error **errp)
+{
+ uint64_t msk = s->capareg;
+ uint32_t val;
+ bool y;
+
+ switch (s->sd_spec_version) {
+ case 4:
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS64BIT_V4);
+ trace_sdhci_capareg("64-bit system bus (v4)", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, BUS64BIT_V4, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, UHS_II);
+ trace_sdhci_capareg("UHS-II", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, UHS_II, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA3);
+ trace_sdhci_capareg("ADMA3", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA3, 0);
+
+ /* fallthrough */
+ case 3:
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, ASYNC_INT);
+ trace_sdhci_capareg("async interrupt", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, ASYNC_INT, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, SLOT_TYPE);
+ if (val) {
+ error_setg(errp, "slot-type not supported");
+ return;
+ }
+ trace_sdhci_capareg("slot type", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, SLOT_TYPE, 0);
+
+ if (val != 2) {
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, EMBEDDED_8BIT);
+ trace_sdhci_capareg("8-bit bus", val);
+ }
+ msk = FIELD_DP64(msk, SDHC_CAPAB, EMBEDDED_8BIT, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS_SPEED);
+ trace_sdhci_capareg("bus speed mask", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, BUS_SPEED, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, DRIVER_STRENGTH);
+ trace_sdhci_capareg("driver strength mask", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, DRIVER_STRENGTH, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, TIMER_RETUNING);
+ trace_sdhci_capareg("timer re-tuning", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, TIMER_RETUNING, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, SDR50_TUNING);
+ trace_sdhci_capareg("use SDR50 tuning", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, SDR50_TUNING, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, RETUNING_MODE);
+ trace_sdhci_capareg("re-tuning mode", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, RETUNING_MODE, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, CLOCK_MULT);
+ trace_sdhci_capareg("clock multiplier", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, CLOCK_MULT, 0);
+
+ /* fallthrough */
+ case 2: /* default version */
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA2);
+ trace_sdhci_capareg("ADMA2", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA2, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA1);
+ trace_sdhci_capareg("ADMA1", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA1, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS64BIT);
+ trace_sdhci_capareg("64-bit system bus (v3)", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, BUS64BIT, 0);
+
+ /* fallthrough */
+ case 1:
+ y = FIELD_EX64(s->capareg, SDHC_CAPAB, TOUNIT);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, TOUNIT, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, TOCLKFREQ);
+ trace_sdhci_capareg(y ? "timeout (MHz)" : "Timeout (KHz)", val);
+ if (sdhci_check_capab_freq_range(s, "timeout", val, errp)) {
+ return;
+ }
+ msk = FIELD_DP64(msk, SDHC_CAPAB, TOCLKFREQ, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, BASECLKFREQ);
+ trace_sdhci_capareg(y ? "base (MHz)" : "Base (KHz)", val);
+ if (sdhci_check_capab_freq_range(s, "base", val, errp)) {
+ return;
+ }
+ msk = FIELD_DP64(msk, SDHC_CAPAB, BASECLKFREQ, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, MAXBLOCKLENGTH);
+ if (val >= 3) {
+ error_setg(errp, "block size can be 512, 1024 or 2048 only");
+ return;
+ }
+ trace_sdhci_capareg("max block length", sdhci_get_fifolen(s));
+ msk = FIELD_DP64(msk, SDHC_CAPAB, MAXBLOCKLENGTH, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, HIGHSPEED);
+ trace_sdhci_capareg("high speed", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, HIGHSPEED, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, SDMA);
+ trace_sdhci_capareg("SDMA", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, SDMA, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, SUSPRESUME);
+ trace_sdhci_capareg("suspend/resume", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, SUSPRESUME, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, V33);
+ trace_sdhci_capareg("3.3v", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, V33, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, V30);
+ trace_sdhci_capareg("3.0v", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, V30, 0);
+
+ val = FIELD_EX64(s->capareg, SDHC_CAPAB, V18);
+ trace_sdhci_capareg("1.8v", val);
+ msk = FIELD_DP64(msk, SDHC_CAPAB, V18, 0);
+ break;
+
+ default:
+ error_setg(errp, "Unsupported spec version: %u", s->sd_spec_version);
+ }
+ if (msk) {
+ qemu_log_mask(LOG_UNIMP,
+ "SDHCI: unknown CAPAB mask: 0x%016" PRIx64 "\n", msk);
+ }
+}
static uint8_t sdhci_slotint(SDHCIState *s)
{
timer_del(s->insert_timer);
timer_del(s->transfer_timer);
- /* Set all registers to 0. Capabilities registers are not cleared
+
+ /* Set all registers to 0. Capabilities/Version registers are not cleared
* and assumed to always preserve their value, given to them during
* initialization */
memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
}
}
- if ((s->norintstsen & SDHC_NISEN_TRSCMP) &&
+ if (!(s->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) &&
+ (s->norintstsen & SDHC_NISEN_TRSCMP) &&
(s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) {
s->norintsts |= SDHC_NIS_TRSCMP;
}
/*
* Programmed i/o data transfer
*/
+#define BLOCK_SIZE_MASK (4 * K_BYTE - 1)
/* Fill host controller's read buffer with BLKSIZE bytes of data from card */
static void sdhci_read_block_from_card(SDHCIState *s)
{
int index = 0;
+ uint8_t data;
+ const uint16_t blk_size = s->blksize & BLOCK_SIZE_MASK;
if ((s->trnmod & SDHC_TRNS_MULTI) &&
(s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) {
return;
}
- for (index = 0; index < (s->blksize & 0x0fff); index++) {
- s->fifo_buffer[index] = sdbus_read_data(&s->sdbus);
+ for (index = 0; index < blk_size; index++) {
+ data = sdbus_read_data(&s->sdbus);
+ if (!FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) {
+ /* Device is not in tuning */
+ s->fifo_buffer[index] = data;
+ }
+ }
+
+ if (FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) {
+ /* Device is in tuning */
+ s->hostctl2 &= ~R_SDHC_HOSTCTL2_EXECUTE_TUNING_MASK;
+ s->hostctl2 |= R_SDHC_HOSTCTL2_SAMPLING_CLKSEL_MASK;
+ s->prnsts &= ~(SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ |
+ SDHC_DATA_INHIBIT);
+ goto read_done;
}
/* New data now available for READ through Buffer Port Register */
}
}
+read_done:
sdhci_update_irq(s);
}
value |= s->fifo_buffer[s->data_count] << i * 8;
s->data_count++;
/* check if we've read all valid data (blksize bytes) from buffer */
- if ((s->data_count) >= (s->blksize & 0x0fff)) {
+ if ((s->data_count) >= (s->blksize & BLOCK_SIZE_MASK)) {
trace_sdhci_read_dataport(s->data_count);
s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */
s->data_count = 0; /* next buff read must start at position [0] */
}
}
- for (index = 0; index < (s->blksize & 0x0fff); index++) {
+ for (index = 0; index < (s->blksize & BLOCK_SIZE_MASK); index++) {
sdbus_write_data(&s->sdbus, s->fifo_buffer[index]);
}
s->fifo_buffer[s->data_count] = value & 0xFF;
s->data_count++;
value >>= 8;
- if (s->data_count >= (s->blksize & 0x0fff)) {
+ if (s->data_count >= (s->blksize & BLOCK_SIZE_MASK)) {
trace_sdhci_write_dataport(s->data_count);
s->data_count = 0;
s->prnsts &= ~SDHC_SPACE_AVAILABLE;
{
bool page_aligned = false;
unsigned int n, begin;
- const uint16_t block_size = s->blksize & 0x0fff;
- uint32_t boundary_chk = 1 << (((s->blksize & 0xf000) >> 12) + 12);
+ const uint16_t block_size = s->blksize & BLOCK_SIZE_MASK;
+ uint32_t boundary_chk = 1 << (((s->blksize & ~BLOCK_SIZE_MASK) >> 12) + 12);
uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk);
if (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || !s->blkcnt) {
s->blkcnt--;
}
}
- dma_memory_write(&address_space_memory, s->sdmasysad,
+ dma_memory_write(s->dma_as, s->sdmasysad,
&s->fifo_buffer[begin], s->data_count - begin);
s->sdmasysad += s->data_count - begin;
if (s->data_count == block_size) {
s->data_count = block_size;
boundary_count -= block_size - begin;
}
- dma_memory_read(&address_space_memory, s->sdmasysad,
+ dma_memory_read(s->dma_as, s->sdmasysad,
&s->fifo_buffer[begin], s->data_count - begin);
s->sdmasysad += s->data_count - begin;
if (s->data_count == block_size) {
static void sdhci_sdma_transfer_single_block(SDHCIState *s)
{
int n;
- uint32_t datacnt = s->blksize & 0x0fff;
+ uint32_t datacnt = s->blksize & BLOCK_SIZE_MASK;
if (s->trnmod & SDHC_TRNS_READ) {
for (n = 0; n < datacnt; n++) {
s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
}
- dma_memory_write(&address_space_memory, s->sdmasysad, s->fifo_buffer,
- datacnt);
+ dma_memory_write(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt);
} else {
- dma_memory_read(&address_space_memory, s->sdmasysad, s->fifo_buffer,
- datacnt);
+ dma_memory_read(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt);
for (n = 0; n < datacnt; n++) {
sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
}
uint32_t adma1 = 0;
uint64_t adma2 = 0;
hwaddr entry_addr = (hwaddr)s->admasysaddr;
- switch (SDHC_DMA_TYPE(s->hostctl)) {
+ switch (SDHC_DMA_TYPE(s->hostctl1)) {
case SDHC_CTRL_ADMA2_32:
- dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma2,
+ dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma2,
sizeof(adma2));
adma2 = le64_to_cpu(adma2);
/* The spec does not specify endianness of descriptor table.
dscr->incr = 8;
break;
case SDHC_CTRL_ADMA1_32:
- dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma1,
+ dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma1,
sizeof(adma1));
adma1 = le32_to_cpu(adma1);
dscr->addr = (hwaddr)(adma1 & 0xFFFFF000);
}
break;
case SDHC_CTRL_ADMA2_64:
- dma_memory_read(&address_space_memory, entry_addr,
+ dma_memory_read(s->dma_as, entry_addr,
(uint8_t *)(&dscr->attr), 1);
- dma_memory_read(&address_space_memory, entry_addr + 2,
+ dma_memory_read(s->dma_as, entry_addr + 2,
(uint8_t *)(&dscr->length), 2);
dscr->length = le16_to_cpu(dscr->length);
- dma_memory_read(&address_space_memory, entry_addr + 4,
+ dma_memory_read(s->dma_as, entry_addr + 4,
(uint8_t *)(&dscr->addr), 8);
- dscr->attr = le64_to_cpu(dscr->attr);
- dscr->attr &= 0xfffffff8;
+ dscr->addr = le64_to_cpu(dscr->addr);
+ dscr->attr &= (uint8_t) ~0xC0;
dscr->incr = 12;
break;
}
static void sdhci_do_adma(SDHCIState *s)
{
unsigned int n, begin, length;
- const uint16_t block_size = s->blksize & 0x0fff;
+ const uint16_t block_size = s->blksize & BLOCK_SIZE_MASK;
ADMADescr dscr = {};
int i;
s->data_count = block_size;
length -= block_size - begin;
}
- dma_memory_write(&address_space_memory, dscr.addr,
+ dma_memory_write(s->dma_as, dscr.addr,
&s->fifo_buffer[begin],
s->data_count - begin);
dscr.addr += s->data_count - begin;
s->data_count = block_size;
length -= block_size - begin;
}
- dma_memory_read(&address_space_memory, dscr.addr,
+ dma_memory_read(s->dma_as, dscr.addr,
&s->fifo_buffer[begin],
s->data_count - begin);
dscr.addr += s->data_count - begin;
SDHCIState *s = (SDHCIState *)opaque;
if (s->trnmod & SDHC_TRNS_DMA) {
- switch (SDHC_DMA_TYPE(s->hostctl)) {
+ switch (SDHC_DMA_TYPE(s->hostctl1)) {
case SDHC_CTRL_SDMA:
if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) {
sdhci_sdma_transfer_single_block(s);
break;
case SDHC_CTRL_ADMA1_32:
- if (!(s->capareg & SDHC_CAN_DO_ADMA1)) {
+ if (!(s->capareg & R_SDHC_CAPAB_ADMA1_MASK)) {
trace_sdhci_error("ADMA1 not supported");
break;
}
sdhci_do_adma(s);
break;
case SDHC_CTRL_ADMA2_32:
- if (!(s->capareg & SDHC_CAN_DO_ADMA2)) {
+ if (!(s->capareg & R_SDHC_CAPAB_ADMA2_MASK)) {
trace_sdhci_error("ADMA2 not supported");
break;
}
sdhci_do_adma(s);
break;
case SDHC_CTRL_ADMA2_64:
- if (!(s->capareg & SDHC_CAN_DO_ADMA2) ||
- !(s->capareg & SDHC_64_BIT_BUS_SUPPORT)) {
+ if (!(s->capareg & R_SDHC_CAPAB_ADMA2_MASK) ||
+ !(s->capareg & R_SDHC_CAPAB_BUS64BIT_MASK)) {
trace_sdhci_error("64 bit ADMA not supported");
break;
}
break;
case SDHC_PRNSTS:
ret = s->prnsts;
+ ret = FIELD_DP32(ret, SDHC_PRNSTS, DAT_LVL,
+ sdbus_get_dat_lines(&s->sdbus));
+ ret = FIELD_DP32(ret, SDHC_PRNSTS, CMD_LVL,
+ sdbus_get_cmd_line(&s->sdbus));
break;
case SDHC_HOSTCTL:
- ret = s->hostctl | (s->pwrcon << 8) | (s->blkgap << 16) |
+ ret = s->hostctl1 | (s->pwrcon << 8) | (s->blkgap << 16) |
(s->wakcon << 24);
break;
case SDHC_CLKCON:
ret = s->norintsigen | (s->errintsigen << 16);
break;
case SDHC_ACMD12ERRSTS:
- ret = s->acmd12errsts;
+ ret = s->acmd12errsts | (s->hostctl2 << 16);
+ break;
+ case SDHC_CAPAB:
+ ret = (uint32_t)s->capareg;
break;
- case SDHC_CAPAREG:
- ret = s->capareg;
+ case SDHC_CAPAB + 4:
+ ret = (uint32_t)(s->capareg >> 32);
break;
case SDHC_MAXCURR:
- ret = s->maxcurr;
+ ret = (uint32_t)s->maxcurr;
+ break;
+ case SDHC_MAXCURR + 4:
+ ret = (uint32_t)(s->maxcurr >> 32);
break;
case SDHC_ADMAERR:
ret = s->admaerr;
ret = (uint32_t)(s->admasysaddr >> 32);
break;
case SDHC_SLOT_INT_STATUS:
- ret = (SD_HOST_SPECv2_VERS << 16) | sdhci_slotint(s);
+ ret = (s->version << 16) | sdhci_slotint(s);
break;
default:
qemu_log_mask(LOG_UNIMP, "SDHC rd_%ub @0x%02" HWADDR_PRIx " "
MASKED_WRITE(s->sdmasysad, mask, value);
/* Writing to last byte of sdmasysad might trigger transfer */
if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt &&
- s->blksize && SDHC_DMA_TYPE(s->hostctl) == SDHC_CTRL_SDMA) {
+ s->blksize && SDHC_DMA_TYPE(s->hostctl1) == SDHC_CTRL_SDMA) {
if (s->trnmod & SDHC_TRNS_MULTI) {
sdhci_sdma_transfer_multi_blocks(s);
} else {
case SDHC_TRNMOD:
/* DMA can be enabled only if it is supported as indicated by
* capabilities register */
- if (!(s->capareg & SDHC_CAN_DO_DMA)) {
+ if (!(s->capareg & R_SDHC_CAPAB_SDMA_MASK)) {
value &= ~SDHC_TRNS_DMA;
}
MASKED_WRITE(s->trnmod, mask, value & SDHC_TRNMOD_MASK);
if (!(mask & 0xFF0000)) {
sdhci_blkgap_write(s, value >> 16);
}
- MASKED_WRITE(s->hostctl, mask, value);
+ MASKED_WRITE(s->hostctl1, mask, value);
MASKED_WRITE(s->pwrcon, mask >> 8, value >> 8);
MASKED_WRITE(s->wakcon, mask >> 24, value >> 24);
if (!(s->prnsts & SDHC_CARD_PRESENT) || ((s->pwrcon >> 1) & 0x7) < 5 ||
}
sdhci_update_irq(s);
break;
+ case SDHC_ACMD12ERRSTS:
+ MASKED_WRITE(s->acmd12errsts, mask, value & UINT16_MAX);
+ if (s->uhs_mode >= UHS_I) {
+ MASKED_WRITE(s->hostctl2, mask >> 16, value >> 16);
+
+ if (FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, V18_ENA)) {
+ sdbus_set_voltage(&s->sdbus, SD_VOLTAGE_1_8V);
+ } else {
+ sdbus_set_voltage(&s->sdbus, SD_VOLTAGE_3_3V);
+ }
+ }
+ break;
+
+ case SDHC_CAPAB:
+ case SDHC_CAPAB + 4:
+ case SDHC_MAXCURR:
+ case SDHC_MAXCURR + 4:
+ qemu_log_mask(LOG_GUEST_ERROR, "SDHC wr_%ub @0x%02" HWADDR_PRIx
+ " <- 0x%08x read-only\n", size, offset, value >> shift);
+ break;
+
default:
qemu_log_mask(LOG_UNIMP, "SDHC wr_%ub @0x%02" HWADDR_PRIx " <- 0x%08x "
"not implemented\n", size, offset, value >> shift);
.endianness = DEVICE_LITTLE_ENDIAN,
};
-static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
+static void sdhci_init_readonly_registers(SDHCIState *s, Error **errp)
{
- switch (SDHC_CAPAB_BLOCKSIZE(s->capareg)) {
- case 0:
- return 512;
- case 1:
- return 1024;
- case 2:
- return 2048;
+ Error *local_err = NULL;
+
+ switch (s->sd_spec_version) {
+ case 2 ... 3:
+ break;
default:
- hw_error("SDHC: unsupported value for maximum block size\n");
- return 0;
+ error_setg(errp, "Only Spec v2/v3 are supported");
+ return;
+ }
+ s->version = (SDHC_HCVER_VENDOR << 8) | (s->sd_spec_version - 1);
+
+ sdhci_check_capareg(s, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
}
}
/* --- qdev common --- */
#define DEFINE_SDHCI_COMMON_PROPERTIES(_state) \
- /* Capabilities registers provide information on supported features
- * of this specific host controller implementation */ \
- DEFINE_PROP_UINT32("capareg", _state, capareg, SDHC_CAPAB_REG_DEFAULT), \
- DEFINE_PROP_UINT32("maxcurr", _state, maxcurr, 0)
+ DEFINE_PROP_UINT8("sd-spec-version", _state, sd_spec_version, 2), \
+ DEFINE_PROP_UINT8("uhs", _state, uhs_mode, UHS_NOT_SUPPORTED), \
+ \
+ /* Capabilities registers provide information on supported
+ * features of this specific host controller implementation */ \
+ DEFINE_PROP_UINT64("capareg", _state, capareg, SDHC_CAPAB_REG_DEFAULT), \
+ DEFINE_PROP_UINT64("maxcurr", _state, maxcurr, 0)
static void sdhci_initfn(SDHCIState *s)
{
s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s);
s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s);
+
+ s->io_ops = &sdhci_mmio_ops;
}
static void sdhci_uninitfn(SDHCIState *s)
static void sdhci_common_realize(SDHCIState *s, Error **errp)
{
+ Error *local_err = NULL;
+
+ sdhci_init_readonly_registers(s, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
s->buf_maxsz = sdhci_get_fifolen(s);
s->fifo_buffer = g_malloc0(s->buf_maxsz);
VMSTATE_UINT16(cmdreg, SDHCIState),
VMSTATE_UINT32_ARRAY(rspreg, SDHCIState, 4),
VMSTATE_UINT32(prnsts, SDHCIState),
- VMSTATE_UINT8(hostctl, SDHCIState),
+ VMSTATE_UINT8(hostctl1, SDHCIState),
VMSTATE_UINT8(pwrcon, SDHCIState),
VMSTATE_UINT8(blkgap, SDHCIState),
VMSTATE_UINT8(wakcon, SDHCIState),
static void sdhci_pci_realize(PCIDevice *dev, Error **errp)
{
SDHCIState *s = PCI_SDHCI(dev);
+ Error *local_err = NULL;
sdhci_initfn(s);
sdhci_common_realize(s, errp);
- if (errp && *errp) {
+ if (local_err) {
+ error_propagate(errp, local_err);
return;
}
dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */
dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
s->irq = pci_allocate_irq(dev);
- pci_register_bar(dev, 0, 0, &s->iomem);
+ s->dma_as = pci_get_address_space(dev);
+ pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->iomem);
}
static void sdhci_pci_exit(PCIDevice *dev)
DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState),
DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk,
false),
+ DEFINE_PROP_LINK("dma", SDHCIState,
+ dma_mr, TYPE_MEMORY_REGION, MemoryRegion *),
DEFINE_PROP_END_OF_LIST(),
};
static void sdhci_sysbus_finalize(Object *obj)
{
SDHCIState *s = SYSBUS_SDHCI(obj);
+
+ if (s->dma_mr) {
+ object_unparent(OBJECT(s->dma_mr));
+ }
+
sdhci_uninitfn(s);
}
{
SDHCIState *s = SYSBUS_SDHCI(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ Error *local_err = NULL;
sdhci_common_realize(s, errp);
- if (errp && *errp) {
+ if (local_err) {
+ error_propagate(errp, local_err);
return;
}
+ if (s->dma_mr) {
+ s->dma_as = &s->sysbus_dma_as;
+ address_space_init(s->dma_as, s->dma_mr, "sdhci-dma");
+ } else {
+ /* use system_memory() if property "dma" not set */
+ s->dma_as = &address_space_memory;
+ }
+
sysbus_init_irq(sbd, &s->irq);
+
+ memory_region_init_io(&s->iomem, OBJECT(s), s->io_ops, s, "sdhci",
+ SDHC_REGISTERS_MAP_SIZE);
+
sysbus_init_mmio(sbd, &s->iomem);
}
SDHCIState *s = SYSBUS_SDHCI(dev);
sdhci_common_unrealize(s, &error_abort);
+
+ if (s->dma_mr) {
+ address_space_destroy(s->dma_as);
+ }
}
static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
.class_init = sdhci_bus_class_init,
};
+static uint64_t usdhc_read(void *opaque, hwaddr offset, unsigned size)
+{
+ SDHCIState *s = SYSBUS_SDHCI(opaque);
+ uint32_t ret;
+ uint16_t hostctl1;
+
+ switch (offset) {
+ default:
+ return sdhci_read(opaque, offset, size);
+
+ case SDHC_HOSTCTL:
+ /*
+ * For a detailed explanation on the following bit
+ * manipulation code see comments in a similar part of
+ * usdhc_write()
+ */
+ hostctl1 = SDHC_DMA_TYPE(s->hostctl1) << (8 - 3);
+
+ if (s->hostctl1 & SDHC_CTRL_8BITBUS) {
+ hostctl1 |= ESDHC_CTRL_8BITBUS;
+ }
+
+ if (s->hostctl1 & SDHC_CTRL_4BITBUS) {
+ hostctl1 |= ESDHC_CTRL_4BITBUS;
+ }
+
+ ret = hostctl1;
+ ret |= (uint32_t)s->blkgap << 16;
+ ret |= (uint32_t)s->wakcon << 24;
+
+ break;
+
+ case ESDHC_DLL_CTRL:
+ case ESDHC_TUNE_CTRL_STATUS:
+ case ESDHC_UNDOCUMENTED_REG27:
+ case ESDHC_TUNING_CTRL:
+ case ESDHC_VENDOR_SPEC:
+ case ESDHC_MIX_CTRL:
+ case ESDHC_WTMK_LVL:
+ ret = 0;
+ break;
+ }
+
+ return ret;
+}
+
+static void
+usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
+{
+ SDHCIState *s = SYSBUS_SDHCI(opaque);
+ uint8_t hostctl1;
+ uint32_t value = (uint32_t)val;
+
+ switch (offset) {
+ case ESDHC_DLL_CTRL:
+ case ESDHC_TUNE_CTRL_STATUS:
+ case ESDHC_UNDOCUMENTED_REG27:
+ case ESDHC_TUNING_CTRL:
+ case ESDHC_WTMK_LVL:
+ case ESDHC_VENDOR_SPEC:
+ break;
+
+ case SDHC_HOSTCTL:
+ /*
+ * Here's What ESDHCI has at offset 0x28 (SDHC_HOSTCTL)
+ *
+ * 7 6 5 4 3 2 1 0
+ * |-----------+--------+--------+-----------+----------+---------|
+ * | Card | Card | Endian | DATA3 | Data | Led |
+ * | Detect | Detect | Mode | as Card | Transfer | Control |
+ * | Signal | Test | | Detection | Width | |
+ * | Selection | Level | | Pin | | |
+ * |-----------+--------+--------+-----------+----------+---------|
+ *
+ * and 0x29
+ *
+ * 15 10 9 8
+ * |----------+------|
+ * | Reserved | DMA |
+ * | | Sel. |
+ * | | |
+ * |----------+------|
+ *
+ * and here's what SDCHI spec expects those offsets to be:
+ *
+ * 0x28 (Host Control Register)
+ *
+ * 7 6 5 4 3 2 1 0
+ * |--------+--------+----------+------+--------+----------+---------|
+ * | Card | Card | Extended | DMA | High | Data | LED |
+ * | Detect | Detect | Data | Sel. | Speed | Transfer | Control |
+ * | Signal | Test | Transfer | | Enable | Width | |
+ * | Sel. | Level | Width | | | | |
+ * |--------+--------+----------+------+--------+----------+---------|
+ *
+ * and 0x29 (Power Control Register)
+ *
+ * |----------------------------------|
+ * | Power Control Register |
+ * | |
+ * | Description omitted, |
+ * | since it has no analog in ESDHCI |
+ * | |
+ * |----------------------------------|
+ *
+ * Since offsets 0x2A and 0x2B should be compatible between
+ * both IP specs we only need to reconcile least 16-bit of the
+ * word we've been given.
+ */
+
+ /*
+ * First, save bits 7 6 and 0 since they are identical
+ */
+ hostctl1 = value & (SDHC_CTRL_LED |
+ SDHC_CTRL_CDTEST_INS |
+ SDHC_CTRL_CDTEST_EN);
+ /*
+ * Second, split "Data Transfer Width" from bits 2 and 1 in to
+ * bits 5 and 1
+ */
+ if (value & ESDHC_CTRL_8BITBUS) {
+ hostctl1 |= SDHC_CTRL_8BITBUS;
+ }
+
+ if (value & ESDHC_CTRL_4BITBUS) {
+ hostctl1 |= ESDHC_CTRL_4BITBUS;
+ }
+
+ /*
+ * Third, move DMA select from bits 9 and 8 to bits 4 and 3
+ */
+ hostctl1 |= SDHC_DMA_TYPE(value >> (8 - 3));
+
+ /*
+ * Now place the corrected value into low 16-bit of the value
+ * we are going to give standard SDHCI write function
+ *
+ * NOTE: This transformation should be the inverse of what can
+ * be found in drivers/mmc/host/sdhci-esdhc-imx.c in Linux
+ * kernel
+ */
+ value &= ~UINT16_MAX;
+ value |= hostctl1;
+ value |= (uint16_t)s->pwrcon << 8;
+
+ sdhci_write(opaque, offset, value, size);
+ break;
+
+ case ESDHC_MIX_CTRL:
+ /*
+ * So, when SD/MMC stack in Linux tries to write to "Transfer
+ * Mode Register", ESDHC i.MX quirk code will translate it
+ * into a write to ESDHC_MIX_CTRL, so we do the opposite in
+ * order to get where we started
+ *
+ * Note that Auto CMD23 Enable bit is located in a wrong place
+ * on i.MX, but since it is not used by QEMU we do not care.
+ *
+ * We don't want to call sdhci_write(.., SDHC_TRNMOD, ...)
+ * here becuase it will result in a call to
+ * sdhci_send_command(s) which we don't want.
+ *
+ */
+ s->trnmod = value & UINT16_MAX;
+ break;
+ case SDHC_TRNMOD:
+ /*
+ * Similar to above, but this time a write to "Command
+ * Register" will be translated into a 4-byte write to
+ * "Transfer Mode register" where lower 16-bit of value would
+ * be set to zero. So what we do is fill those bits with
+ * cached value from s->trnmod and let the SDHCI
+ * infrastructure handle the rest
+ */
+ sdhci_write(opaque, offset, val | s->trnmod, size);
+ break;
+ case SDHC_BLKSIZE:
+ /*
+ * ESDHCI does not implement "Host SDMA Buffer Boundary", and
+ * Linux driver will try to zero this field out which will
+ * break the rest of SDHCI emulation.
+ *
+ * Linux defaults to maximum possible setting (512K boundary)
+ * and it seems to be the only option that i.MX IP implements,
+ * so we artificially set it to that value.
+ */
+ val |= 0x7 << 12;
+ /* FALLTHROUGH */
+ default:
+ sdhci_write(opaque, offset, val, size);
+ break;
+ }
+}
+
+
+static const MemoryRegionOps usdhc_mmio_ops = {
+ .read = usdhc_read,
+ .write = usdhc_write,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 4,
+ .unaligned = false
+ },
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void imx_usdhc_init(Object *obj)
+{
+ SDHCIState *s = SYSBUS_SDHCI(obj);
+
+ s->io_ops = &usdhc_mmio_ops;
+ s->quirks = SDHCI_QUIRK_NO_BUSY_IRQ;
+}
+
+static const TypeInfo imx_usdhc_info = {
+ .name = TYPE_IMX_USDHC,
+ .parent = TYPE_SYSBUS_SDHCI,
+ .instance_init = imx_usdhc_init,
+};
+
static void sdhci_register_types(void)
{
type_register_static(&sdhci_pci_info);
type_register_static(&sdhci_sysbus_info);
type_register_static(&sdhci_bus_info);
+ type_register_static(&imx_usdhc_info);
}
type_init(sdhci_register_types)
projects / qemu.git / blobdiff