* Based on code by Fabrice Bellard
*
* Written by Paul Brook
+ * Modifications:
+ * 2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
+ * when the allocation length of CDB is smaller
+ * than 36.
+ * 2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
+ * MODE SENSE response.
*
* This code is licenced under the LGPL.
*
//#define DEBUG_SCSI
#ifdef DEBUG_SCSI
-#define DPRINTF(fmt, args...) \
-do { printf("scsi-disk: " fmt , ##args); } while (0)
+#define DPRINTF(fmt, ...) \
+do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
#else
-#define DPRINTF(fmt, args...) do {} while(0)
+#define DPRINTF(fmt, ...) do {} while(0)
#endif
-#define BADF(fmt, args...) \
-do { fprintf(stderr, "scsi-disk: " fmt , ##args); } while (0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
#include "qemu-common.h"
+#include "qemu-error.h"
#include "block.h"
-#include "scsi-disk.h"
+#include "scsi.h"
+#include "scsi-defs.h"
-#define SENSE_NO_SENSE 0
-#define SENSE_NOT_READY 2
-#define SENSE_HARDWARE_ERROR 4
-#define SENSE_ILLEGAL_REQUEST 5
+#define SCSI_DMA_BUF_SIZE 131072
+#define SCSI_MAX_INQUIRY_LEN 256
-#define STATUS_GOOD 0
-#define STATUS_CHECK_CONDITION 2
+#define SCSI_REQ_STATUS_RETRY 0x01
-#define SCSI_DMA_BUF_SIZE 131072
+typedef struct SCSIDiskState SCSIDiskState;
-typedef struct SCSIRequest {
- SCSIDeviceState *dev;
- uint32_t tag;
- /* ??? We should probably keep track of whether the data trasfer is
+typedef struct SCSIDiskReq {
+ SCSIRequest req;
+ /* ??? We should probably keep track of whether the data transfer is
a read or a write. Currently we rely on the host getting it right. */
/* Both sector and sector_count are in terms of qemu 512 byte blocks. */
- int sector;
- int sector_count;
- /* The amounnt of data in the buffer. */
- int buf_len;
- uint8_t *dma_buf;
- BlockDriverAIOCB *aiocb;
- struct SCSIRequest *next;
-} SCSIRequest;
-
-struct SCSIDeviceState
+ uint64_t sector;
+ uint32_t sector_count;
+ struct iovec iov;
+ QEMUIOVector qiov;
+ uint32_t status;
+} SCSIDiskReq;
+
+struct SCSIDiskState
{
- BlockDriverState *bdrv;
- SCSIRequest *requests;
+ SCSIDevice qdev;
+ BlockDriverState *bs;
/* The qemu block layer uses a fixed 512 byte sector size.
This is the number of 512 byte blocks in a single scsi sector. */
int cluster_size;
- int sense;
- int tcq;
- /* Completion functions may be called from either scsi_{read,write}_data
- or from the AIO completion routines. */
- scsi_completionfn completion;
- void *opaque;
+ uint64_t max_lba;
+ QEMUBH *bh;
+ char *version;
};
-/* Global pool of SCSIRequest structures. */
-static SCSIRequest *free_requests = NULL;
-
-static SCSIRequest *scsi_new_request(SCSIDeviceState *s, uint32_t tag)
+static SCSIDiskReq *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun)
{
- SCSIRequest *r;
-
- if (free_requests) {
- r = free_requests;
- free_requests = r->next;
- } else {
- r = qemu_malloc(sizeof(SCSIRequest));
- r->dma_buf = qemu_memalign(512, SCSI_DMA_BUF_SIZE);
- }
- r->dev = s;
- r->tag = tag;
- r->sector_count = 0;
- r->buf_len = 0;
- r->aiocb = NULL;
+ SCSIRequest *req;
+ SCSIDiskReq *r;
- r->next = s->requests;
- s->requests = r;
+ req = scsi_req_alloc(sizeof(SCSIDiskReq), d, tag, lun);
+ r = DO_UPCAST(SCSIDiskReq, req, req);
+ r->iov.iov_base = qemu_memalign(512, SCSI_DMA_BUF_SIZE);
return r;
}
-static void scsi_remove_request(SCSIRequest *r)
+static void scsi_remove_request(SCSIDiskReq *r)
{
- SCSIRequest *last;
- SCSIDeviceState *s = r->dev;
-
- if (s->requests == r) {
- s->requests = r->next;
- } else {
- last = s->requests;
- while (last && last->next != r)
- last = last->next;
- if (last) {
- last->next = r->next;
- } else {
- BADF("Orphaned request\n");
- }
- }
- r->next = free_requests;
- free_requests = r;
+ qemu_vfree(r->iov.iov_base);
+ scsi_req_free(&r->req);
}
-static SCSIRequest *scsi_find_request(SCSIDeviceState *s, uint32_t tag)
+static SCSIDiskReq *scsi_find_request(SCSIDiskState *s, uint32_t tag)
{
- SCSIRequest *r;
-
- r = s->requests;
- while (r && r->tag != tag)
- r = r->next;
+ return DO_UPCAST(SCSIDiskReq, req, scsi_req_find(&s->qdev, tag));
+}
- return r;
+static void scsi_req_set_status(SCSIRequest *req, int status, int sense_code)
+{
+ req->status = status;
+ scsi_dev_set_sense(req->dev, sense_code);
}
/* Helper function for command completion. */
-static void scsi_command_complete(SCSIRequest *r, int status, int sense)
+static void scsi_command_complete(SCSIDiskReq *r, int status, int sense)
{
- SCSIDeviceState *s = r->dev;
- uint32_t tag;
- DPRINTF("Command complete tag=0x%x status=%d sense=%d\n", r->tag, status, sense);
- s->sense = sense;
- tag = r->tag;
+ DPRINTF("Command complete tag=0x%x status=%d sense=%d\n",
+ r->req.tag, status, sense);
+ scsi_req_set_status(&r->req, status, sense);
+ scsi_req_complete(&r->req);
scsi_remove_request(r);
- s->completion(s->opaque, SCSI_REASON_DONE, tag, status);
}
/* Cancel a pending data transfer. */
static void scsi_cancel_io(SCSIDevice *d, uint32_t tag)
{
- SCSIDeviceState *s = d->state;
- SCSIRequest *r;
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
+ SCSIDiskReq *r;
DPRINTF("Cancel tag=0x%x\n", tag);
r = scsi_find_request(s, tag);
if (r) {
- if (r->aiocb)
- bdrv_aio_cancel(r->aiocb);
- r->aiocb = NULL;
+ if (r->req.aiocb)
+ bdrv_aio_cancel(r->req.aiocb);
+ r->req.aiocb = NULL;
scsi_remove_request(r);
}
}
static void scsi_read_complete(void * opaque, int ret)
{
- SCSIRequest *r = (SCSIRequest *)opaque;
- SCSIDeviceState *s = r->dev;
+ SCSIDiskReq *r = (SCSIDiskReq *)opaque;
if (ret) {
DPRINTF("IO error\n");
- s->completion(s->opaque, SCSI_REASON_DATA, r->tag, 0);
- scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_NO_SENSE);
+ r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, 0);
+ scsi_command_complete(r, CHECK_CONDITION, NO_SENSE);
return;
}
- DPRINTF("Data ready tag=0x%x len=%d\n", r->tag, r->buf_len);
+ DPRINTF("Data ready tag=0x%x len=%" PRId64 "\n", r->req.tag, r->iov.iov_len);
- s->completion(s->opaque, SCSI_REASON_DATA, r->tag, r->buf_len);
+ r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len);
}
/* Read more data from scsi device into buffer. */
static void scsi_read_data(SCSIDevice *d, uint32_t tag)
{
- SCSIDeviceState *s = d->state;
- SCSIRequest *r;
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
+ SCSIDiskReq *r;
uint32_t n;
r = scsi_find_request(s, tag);
if (!r) {
BADF("Bad read tag 0x%x\n", tag);
/* ??? This is the wrong error. */
- scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR);
+ scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
return;
}
if (r->sector_count == (uint32_t)-1) {
- DPRINTF("Read buf_len=%d\n", r->buf_len);
+ DPRINTF("Read buf_len=%" PRId64 "\n", r->iov.iov_len);
r->sector_count = 0;
- s->completion(s->opaque, SCSI_REASON_DATA, r->tag, r->buf_len);
+ r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len);
return;
}
DPRINTF("Read sector_count=%d\n", r->sector_count);
if (r->sector_count == 0) {
- scsi_command_complete(r, STATUS_GOOD, SENSE_NO_SENSE);
+ scsi_command_complete(r, GOOD, NO_SENSE);
return;
}
if (n > SCSI_DMA_BUF_SIZE / 512)
n = SCSI_DMA_BUF_SIZE / 512;
- r->buf_len = n * 512;
- r->aiocb = bdrv_aio_read(s->bdrv, r->sector, r->dma_buf, n,
- scsi_read_complete, r);
- if (r->aiocb == NULL)
- scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR);
+ r->iov.iov_len = n * 512;
+ qemu_iovec_init_external(&r->qiov, &r->iov, 1);
+ r->req.aiocb = bdrv_aio_readv(s->bs, r->sector, &r->qiov, n,
+ scsi_read_complete, r);
+ if (r->req.aiocb == NULL)
+ scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
r->sector += n;
r->sector_count -= n;
}
+static int scsi_handle_write_error(SCSIDiskReq *r, int error)
+{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+ BlockInterfaceErrorAction action = drive_get_on_error(s->bs, 0);
+
+ if (action == BLOCK_ERR_IGNORE) {
+ bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, 0);
+ return 0;
+ }
+
+ if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
+ || action == BLOCK_ERR_STOP_ANY) {
+ r->status |= SCSI_REQ_STATUS_RETRY;
+ bdrv_mon_event(s->bs, BDRV_ACTION_STOP, 0);
+ vm_stop(0);
+ } else {
+ scsi_command_complete(r, CHECK_CONDITION,
+ HARDWARE_ERROR);
+ bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, 0);
+ }
+
+ return 1;
+}
+
static void scsi_write_complete(void * opaque, int ret)
{
- SCSIRequest *r = (SCSIRequest *)opaque;
- SCSIDeviceState *s = r->dev;
+ SCSIDiskReq *r = (SCSIDiskReq *)opaque;
uint32_t len;
+ uint32_t n;
+
+ r->req.aiocb = NULL;
if (ret) {
- fprintf(stderr, "scsi-disc: IO write error\n");
- exit(1);
+ if (scsi_handle_write_error(r, -ret))
+ return;
}
- r->aiocb = NULL;
+ n = r->iov.iov_len / 512;
+ r->sector += n;
+ r->sector_count -= n;
if (r->sector_count == 0) {
- scsi_command_complete(r, STATUS_GOOD, SENSE_NO_SENSE);
+ scsi_command_complete(r, GOOD, NO_SENSE);
} else {
len = r->sector_count * 512;
if (len > SCSI_DMA_BUF_SIZE) {
len = SCSI_DMA_BUF_SIZE;
}
- r->buf_len = len;
- DPRINTF("Write complete tag=0x%x more=%d\n", r->tag, len);
- s->completion(s->opaque, SCSI_REASON_DATA, r->tag, len);
+ r->iov.iov_len = len;
+ DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, len);
+ r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, len);
+ }
+}
+
+static void scsi_write_request(SCSIDiskReq *r)
+{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+ uint32_t n;
+
+ n = r->iov.iov_len / 512;
+ if (n) {
+ qemu_iovec_init_external(&r->qiov, &r->iov, 1);
+ r->req.aiocb = bdrv_aio_writev(s->bs, r->sector, &r->qiov, n,
+ scsi_write_complete, r);
+ if (r->req.aiocb == NULL)
+ scsi_command_complete(r, CHECK_CONDITION,
+ HARDWARE_ERROR);
+ } else {
+ /* Invoke completion routine to fetch data from host. */
+ scsi_write_complete(r, 0);
}
}
The transfer may complete asynchronously. */
static int scsi_write_data(SCSIDevice *d, uint32_t tag)
{
- SCSIDeviceState *s = d->state;
- SCSIRequest *r;
- uint32_t n;
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
+ SCSIDiskReq *r;
DPRINTF("Write data tag=0x%x\n", tag);
r = scsi_find_request(s, tag);
if (!r) {
BADF("Bad write tag 0x%x\n", tag);
- scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR);
+ scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
return 1;
}
- if (r->aiocb)
+
+ if (r->req.aiocb)
BADF("Data transfer already in progress\n");
- n = r->buf_len / 512;
- if (n) {
- r->aiocb = bdrv_aio_write(s->bdrv, r->sector, r->dma_buf, n,
- scsi_write_complete, r);
- if (r->aiocb == NULL)
- scsi_command_complete(r, STATUS_CHECK_CONDITION,
- SENSE_HARDWARE_ERROR);
- r->sector += n;
- r->sector_count -= n;
- } else {
- /* Invoke completion routine to fetch data from host. */
- scsi_write_complete(r, 0);
- }
+
+ scsi_write_request(r);
return 0;
}
+static void scsi_dma_restart_bh(void *opaque)
+{
+ SCSIDiskState *s = opaque;
+ SCSIRequest *req;
+ SCSIDiskReq *r;
+
+ qemu_bh_delete(s->bh);
+ s->bh = NULL;
+
+ QTAILQ_FOREACH(req, &s->qdev.requests, next) {
+ r = DO_UPCAST(SCSIDiskReq, req, req);
+ if (r->status & SCSI_REQ_STATUS_RETRY) {
+ r->status &= ~SCSI_REQ_STATUS_RETRY;
+ scsi_write_request(r);
+ }
+ }
+}
+
+static void scsi_dma_restart_cb(void *opaque, int running, int reason)
+{
+ SCSIDiskState *s = opaque;
+
+ if (!running)
+ return;
+
+ if (!s->bh) {
+ s->bh = qemu_bh_new(scsi_dma_restart_bh, s);
+ qemu_bh_schedule(s->bh);
+ }
+}
+
/* Return a pointer to the data buffer. */
static uint8_t *scsi_get_buf(SCSIDevice *d, uint32_t tag)
{
- SCSIDeviceState *s = d->state;
- SCSIRequest *r;
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
+ SCSIDiskReq *r;
r = scsi_find_request(s, tag);
if (!r) {
BADF("Bad buffer tag 0x%x\n", tag);
return NULL;
}
- return r->dma_buf;
+ return (uint8_t *)r->iov.iov_base;
+}
+
+static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
+{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
+ int buflen = 0;
+
+ if (req->cmd.buf[1] & 0x2) {
+ /* Command support data - optional, not implemented */
+ BADF("optional INQUIRY command support request not implemented\n");
+ return -1;
+ }
+
+ if (req->cmd.buf[1] & 0x1) {
+ /* Vital product data */
+ uint8_t page_code = req->cmd.buf[2];
+ if (req->cmd.xfer < 4) {
+ BADF("Error: Inquiry (EVPD[%02X]) buffer size %zd is "
+ "less than 4\n", page_code, req->cmd.xfer);
+ return -1;
+ }
+
+ if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+ outbuf[buflen++] = 5;
+ } else {
+ outbuf[buflen++] = 0;
+ }
+ outbuf[buflen++] = page_code ; // this page
+ outbuf[buflen++] = 0x00;
+
+ switch (page_code) {
+ case 0x00: /* Supported page codes, mandatory */
+ DPRINTF("Inquiry EVPD[Supported pages] "
+ "buffer size %zd\n", req->cmd.xfer);
+ outbuf[buflen++] = 4; // number of pages
+ outbuf[buflen++] = 0x00; // list of supported pages (this page)
+ outbuf[buflen++] = 0x80; // unit serial number
+ outbuf[buflen++] = 0x83; // device identification
+ outbuf[buflen++] = 0xb0; // block device characteristics
+ break;
+
+ case 0x80: /* Device serial number, optional */
+ {
+ const char *serial = req->dev->conf.dinfo->serial ?
+ req->dev->conf.dinfo->serial : "0";
+ int l = strlen(serial);
+
+ if (l > req->cmd.xfer)
+ l = req->cmd.xfer;
+ if (l > 20)
+ l = 20;
+
+ DPRINTF("Inquiry EVPD[Serial number] "
+ "buffer size %zd\n", req->cmd.xfer);
+ outbuf[buflen++] = l;
+ memcpy(outbuf+buflen, serial, l);
+ buflen += l;
+ break;
+ }
+
+ case 0x83: /* Device identification page, mandatory */
+ {
+ int max_len = 255 - 8;
+ int id_len = strlen(bdrv_get_device_name(s->bs));
+
+ if (id_len > max_len)
+ id_len = max_len;
+ DPRINTF("Inquiry EVPD[Device identification] "
+ "buffer size %zd\n", req->cmd.xfer);
+
+ outbuf[buflen++] = 3 + id_len;
+ outbuf[buflen++] = 0x2; // ASCII
+ outbuf[buflen++] = 0; // not officially assigned
+ outbuf[buflen++] = 0; // reserved
+ outbuf[buflen++] = id_len; // length of data following
+
+ memcpy(outbuf+buflen, bdrv_get_device_name(s->bs), id_len);
+ buflen += id_len;
+ break;
+ }
+ case 0xb0: /* block device characteristics */
+ {
+ unsigned int min_io_size =
+ s->qdev.conf.min_io_size / s->qdev.blocksize;
+ unsigned int opt_io_size =
+ s->qdev.conf.opt_io_size / s->qdev.blocksize;
+
+ /* required VPD size with unmap support */
+ outbuf[3] = buflen = 0x3c;
+
+ memset(outbuf + 4, 0, buflen - 4);
+
+ /* optimal transfer length granularity */
+ outbuf[6] = (min_io_size >> 8) & 0xff;
+ outbuf[7] = min_io_size & 0xff;
+
+ /* optimal transfer length */
+ outbuf[12] = (opt_io_size >> 24) & 0xff;
+ outbuf[13] = (opt_io_size >> 16) & 0xff;
+ outbuf[14] = (opt_io_size >> 8) & 0xff;
+ outbuf[15] = opt_io_size & 0xff;
+ break;
+ }
+ default:
+ BADF("Error: unsupported Inquiry (EVPD[%02X]) "
+ "buffer size %zd\n", page_code, req->cmd.xfer);
+ return -1;
+ }
+ /* done with EVPD */
+ return buflen;
+ }
+
+ /* Standard INQUIRY data */
+ if (req->cmd.buf[2] != 0) {
+ BADF("Error: Inquiry (STANDARD) page or code "
+ "is non-zero [%02X]\n", req->cmd.buf[2]);
+ return -1;
+ }
+
+ /* PAGE CODE == 0 */
+ if (req->cmd.xfer < 5) {
+ BADF("Error: Inquiry (STANDARD) buffer size %zd "
+ "is less than 5\n", req->cmd.xfer);
+ return -1;
+ }
+
+ buflen = req->cmd.xfer;
+ if (buflen > SCSI_MAX_INQUIRY_LEN)
+ buflen = SCSI_MAX_INQUIRY_LEN;
+
+ memset(outbuf, 0, buflen);
+
+ if (req->lun || req->cmd.buf[1] >> 5) {
+ outbuf[0] = 0x7f; /* LUN not supported */
+ return buflen;
+ }
+
+ if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+ outbuf[0] = 5;
+ outbuf[1] = 0x80;
+ memcpy(&outbuf[16], "QEMU CD-ROM ", 16);
+ } else {
+ outbuf[0] = 0;
+ memcpy(&outbuf[16], "QEMU HARDDISK ", 16);
+ }
+ memcpy(&outbuf[8], "QEMU ", 8);
+ memset(&outbuf[32], 0, 4);
+ memcpy(&outbuf[32], s->version ? s->version : QEMU_VERSION,
+ MIN(4, strlen(s->version ? s->version : QEMU_VERSION)));
+ /*
+ * We claim conformance to SPC-3, which is required for guests
+ * to ask for modern features like READ CAPACITY(16) or the
+ * block characteristics VPD page by default. Not all of SPC-3
+ * is actually implemented, but we're good enough.
+ */
+ outbuf[2] = 5;
+ outbuf[3] = 2; /* Format 2 */
+
+ if (buflen > 36) {
+ outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
+ } else {
+ /* If the allocation length of CDB is too small,
+ the additional length is not adjusted */
+ outbuf[4] = 36 - 5;
+ }
+
+ /* Sync data transfer and TCQ. */
+ outbuf[7] = 0x10 | (req->bus->tcq ? 0x02 : 0);
+ return buflen;
+}
+
+static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p)
+{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
+ BlockDriverState *bdrv = s->bs;
+ int cylinders, heads, secs;
+
+ switch (page) {
+ case 4: /* Rigid disk device geometry page. */
+ p[0] = 4;
+ p[1] = 0x16;
+ /* if a geometry hint is available, use it */
+ bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs);
+ p[2] = (cylinders >> 16) & 0xff;
+ p[3] = (cylinders >> 8) & 0xff;
+ p[4] = cylinders & 0xff;
+ p[5] = heads & 0xff;
+ /* Write precomp start cylinder, disabled */
+ p[6] = (cylinders >> 16) & 0xff;
+ p[7] = (cylinders >> 8) & 0xff;
+ p[8] = cylinders & 0xff;
+ /* Reduced current start cylinder, disabled */
+ p[9] = (cylinders >> 16) & 0xff;
+ p[10] = (cylinders >> 8) & 0xff;
+ p[11] = cylinders & 0xff;
+ /* Device step rate [ns], 200ns */
+ p[12] = 0;
+ p[13] = 200;
+ /* Landing zone cylinder */
+ p[14] = 0xff;
+ p[15] = 0xff;
+ p[16] = 0xff;
+ /* Medium rotation rate [rpm], 5400 rpm */
+ p[20] = (5400 >> 8) & 0xff;
+ p[21] = 5400 & 0xff;
+ return 0x16;
+
+ case 5: /* Flexible disk device geometry page. */
+ p[0] = 5;
+ p[1] = 0x1e;
+ /* Transfer rate [kbit/s], 5Mbit/s */
+ p[2] = 5000 >> 8;
+ p[3] = 5000 & 0xff;
+ /* if a geometry hint is available, use it */
+ bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs);
+ p[4] = heads & 0xff;
+ p[5] = secs & 0xff;
+ p[6] = s->cluster_size * 2;
+ p[8] = (cylinders >> 8) & 0xff;
+ p[9] = cylinders & 0xff;
+ /* Write precomp start cylinder, disabled */
+ p[10] = (cylinders >> 8) & 0xff;
+ p[11] = cylinders & 0xff;
+ /* Reduced current start cylinder, disabled */
+ p[12] = (cylinders >> 8) & 0xff;
+ p[13] = cylinders & 0xff;
+ /* Device step rate [100us], 100us */
+ p[14] = 0;
+ p[15] = 1;
+ /* Device step pulse width [us], 1us */
+ p[16] = 1;
+ /* Device head settle delay [100us], 100us */
+ p[17] = 0;
+ p[18] = 1;
+ /* Motor on delay [0.1s], 0.1s */
+ p[19] = 1;
+ /* Motor off delay [0.1s], 0.1s */
+ p[20] = 1;
+ /* Medium rotation rate [rpm], 5400 rpm */
+ p[28] = (5400 >> 8) & 0xff;
+ p[29] = 5400 & 0xff;
+ return 0x1e;
+
+ case 8: /* Caching page. */
+ p[0] = 8;
+ p[1] = 0x12;
+ if (bdrv_enable_write_cache(s->bs)) {
+ p[2] = 4; /* WCE */
+ }
+ return 20;
+
+ case 0x2a: /* CD Capabilities and Mechanical Status page. */
+ if (bdrv_get_type_hint(bdrv) != BDRV_TYPE_CDROM)
+ return 0;
+ p[0] = 0x2a;
+ p[1] = 0x14;
+ p[2] = 3; // CD-R & CD-RW read
+ p[3] = 0; // Writing not supported
+ p[4] = 0x7f; /* Audio, composite, digital out,
+ mode 2 form 1&2, multi session */
+ p[5] = 0xff; /* CD DA, DA accurate, RW supported,
+ RW corrected, C2 errors, ISRC,
+ UPC, Bar code */
+ p[6] = 0x2d | (bdrv_is_locked(s->bs)? 2 : 0);
+ /* Locking supported, jumper present, eject, tray */
+ p[7] = 0; /* no volume & mute control, no
+ changer */
+ p[8] = (50 * 176) >> 8; // 50x read speed
+ p[9] = (50 * 176) & 0xff;
+ p[10] = 0 >> 8; // No volume
+ p[11] = 0 & 0xff;
+ p[12] = 2048 >> 8; // 2M buffer
+ p[13] = 2048 & 0xff;
+ p[14] = (16 * 176) >> 8; // 16x read speed current
+ p[15] = (16 * 176) & 0xff;
+ p[18] = (16 * 176) >> 8; // 16x write speed
+ p[19] = (16 * 176) & 0xff;
+ p[20] = (16 * 176) >> 8; // 16x write speed current
+ p[21] = (16 * 176) & 0xff;
+ return 22;
+
+ default:
+ return 0;
+ }
+}
+
+static int scsi_disk_emulate_mode_sense(SCSIRequest *req, uint8_t *outbuf)
+{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
+ uint64_t nb_sectors;
+ int page, dbd, buflen;
+ uint8_t *p;
+
+ dbd = req->cmd.buf[1] & 0x8;
+ page = req->cmd.buf[2] & 0x3f;
+ DPRINTF("Mode Sense (page %d, len %zd)\n", page, req->cmd.xfer);
+ memset(outbuf, 0, req->cmd.xfer);
+ p = outbuf;
+
+ p[1] = 0; /* Default media type. */
+ p[3] = 0; /* Block descriptor length. */
+ if (bdrv_is_read_only(s->bs)) {
+ p[2] = 0x80; /* Readonly. */
+ }
+ p += 4;
+
+ bdrv_get_geometry(s->bs, &nb_sectors);
+ if ((~dbd) & nb_sectors) {
+ outbuf[3] = 8; /* Block descriptor length */
+ nb_sectors /= s->cluster_size;
+ nb_sectors--;
+ if (nb_sectors > 0xffffff)
+ nb_sectors = 0xffffff;
+ p[0] = 0; /* media density code */
+ p[1] = (nb_sectors >> 16) & 0xff;
+ p[2] = (nb_sectors >> 8) & 0xff;
+ p[3] = nb_sectors & 0xff;
+ p[4] = 0; /* reserved */
+ p[5] = 0; /* bytes 5-7 are the sector size in bytes */
+ p[6] = s->cluster_size * 2;
+ p[7] = 0;
+ p += 8;
+ }
+
+ switch (page) {
+ case 0x04:
+ case 0x05:
+ case 0x08:
+ case 0x2a:
+ p += mode_sense_page(req, page, p);
+ break;
+ case 0x3f:
+ p += mode_sense_page(req, 0x08, p);
+ p += mode_sense_page(req, 0x2a, p);
+ break;
+ }
+
+ buflen = p - outbuf;
+ outbuf[0] = buflen - 4;
+ if (buflen > req->cmd.xfer)
+ buflen = req->cmd.xfer;
+ return buflen;
+}
+
+static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
+{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
+ int start_track, format, msf, toclen;
+ uint64_t nb_sectors;
+
+ msf = req->cmd.buf[1] & 2;
+ format = req->cmd.buf[2] & 0xf;
+ start_track = req->cmd.buf[6];
+ bdrv_get_geometry(s->bs, &nb_sectors);
+ DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
+ nb_sectors /= s->cluster_size;
+ switch (format) {
+ case 0:
+ toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
+ break;
+ case 1:
+ /* multi session : only a single session defined */
+ toclen = 12;
+ memset(outbuf, 0, 12);
+ outbuf[1] = 0x0a;
+ outbuf[2] = 0x01;
+ outbuf[3] = 0x01;
+ break;
+ case 2:
+ toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
+ break;
+ default:
+ return -1;
+ }
+ if (toclen > req->cmd.xfer)
+ toclen = req->cmd.xfer;
+ return toclen;
+}
+
+static int scsi_disk_emulate_command(SCSIRequest *req, uint8_t *outbuf)
+{
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
+ uint64_t nb_sectors;
+ int buflen = 0;
+
+ switch (req->cmd.buf[0]) {
+ case TEST_UNIT_READY:
+ if (!bdrv_is_inserted(s->bs))
+ goto not_ready;
+ break;
+ case REQUEST_SENSE:
+ if (req->cmd.xfer < 4)
+ goto illegal_request;
+ memset(outbuf, 0, 4);
+ buflen = 4;
+ if (req->dev->sense.key == NOT_READY && req->cmd.xfer >= 18) {
+ memset(outbuf, 0, 18);
+ buflen = 18;
+ outbuf[7] = 10;
+ /* asc 0x3a, ascq 0: Medium not present */
+ outbuf[12] = 0x3a;
+ outbuf[13] = 0;
+ }
+ outbuf[0] = 0xf0;
+ outbuf[1] = 0;
+ outbuf[2] = req->dev->sense.key;
+ scsi_dev_clear_sense(req->dev);
+ break;
+ case INQUIRY:
+ buflen = scsi_disk_emulate_inquiry(req, outbuf);
+ if (buflen < 0)
+ goto illegal_request;
+ break;
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ buflen = scsi_disk_emulate_mode_sense(req, outbuf);
+ if (buflen < 0)
+ goto illegal_request;
+ break;
+ case READ_TOC:
+ buflen = scsi_disk_emulate_read_toc(req, outbuf);
+ if (buflen < 0)
+ goto illegal_request;
+ break;
+ case RESERVE:
+ if (req->cmd.buf[1] & 1)
+ goto illegal_request;
+ break;
+ case RESERVE_10:
+ if (req->cmd.buf[1] & 3)
+ goto illegal_request;
+ break;
+ case RELEASE:
+ if (req->cmd.buf[1] & 1)
+ goto illegal_request;
+ break;
+ case RELEASE_10:
+ if (req->cmd.buf[1] & 3)
+ goto illegal_request;
+ break;
+ case START_STOP:
+ if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM && (req->cmd.buf[4] & 2)) {
+ /* load/eject medium */
+ bdrv_eject(s->bs, !(req->cmd.buf[4] & 1));
+ }
+ break;
+ case ALLOW_MEDIUM_REMOVAL:
+ bdrv_set_locked(s->bs, req->cmd.buf[4] & 1);
+ break;
+ case READ_CAPACITY:
+ /* The normal LEN field for this command is zero. */
+ memset(outbuf, 0, 8);
+ bdrv_get_geometry(s->bs, &nb_sectors);
+ if (!nb_sectors)
+ goto not_ready;
+ nb_sectors /= s->cluster_size;
+ /* Returned value is the address of the last sector. */
+ nb_sectors--;
+ /* Remember the new size for read/write sanity checking. */
+ s->max_lba = nb_sectors;
+ /* Clip to 2TB, instead of returning capacity modulo 2TB. */
+ if (nb_sectors > UINT32_MAX)
+ nb_sectors = UINT32_MAX;
+ outbuf[0] = (nb_sectors >> 24) & 0xff;
+ outbuf[1] = (nb_sectors >> 16) & 0xff;
+ outbuf[2] = (nb_sectors >> 8) & 0xff;
+ outbuf[3] = nb_sectors & 0xff;
+ outbuf[4] = 0;
+ outbuf[5] = 0;
+ outbuf[6] = s->cluster_size * 2;
+ outbuf[7] = 0;
+ buflen = 8;
+ break;
+ case SYNCHRONIZE_CACHE:
+ bdrv_flush(s->bs);
+ break;
+ case GET_CONFIGURATION:
+ memset(outbuf, 0, 8);
+ /* ??? This should probably return much more information. For now
+ just return the basic header indicating the CD-ROM profile. */
+ outbuf[7] = 8; // CD-ROM
+ buflen = 8;
+ break;
+ case SERVICE_ACTION_IN:
+ /* Service Action In subcommands. */
+ if ((req->cmd.buf[1] & 31) == 0x10) {
+ DPRINTF("SAI READ CAPACITY(16)\n");
+ memset(outbuf, 0, req->cmd.xfer);
+ bdrv_get_geometry(s->bs, &nb_sectors);
+ if (!nb_sectors)
+ goto not_ready;
+ nb_sectors /= s->cluster_size;
+ /* Returned value is the address of the last sector. */
+ nb_sectors--;
+ /* Remember the new size for read/write sanity checking. */
+ s->max_lba = nb_sectors;
+ outbuf[0] = (nb_sectors >> 56) & 0xff;
+ outbuf[1] = (nb_sectors >> 48) & 0xff;
+ outbuf[2] = (nb_sectors >> 40) & 0xff;
+ outbuf[3] = (nb_sectors >> 32) & 0xff;
+ outbuf[4] = (nb_sectors >> 24) & 0xff;
+ outbuf[5] = (nb_sectors >> 16) & 0xff;
+ outbuf[6] = (nb_sectors >> 8) & 0xff;
+ outbuf[7] = nb_sectors & 0xff;
+ outbuf[8] = 0;
+ outbuf[9] = 0;
+ outbuf[10] = s->cluster_size * 2;
+ outbuf[11] = 0;
+ outbuf[12] = 0;
+ outbuf[13] = get_physical_block_exp(&s->qdev.conf);
+ /* Protection, exponent and lowest lba field left blank. */
+ buflen = req->cmd.xfer;
+ break;
+ }
+ DPRINTF("Unsupported Service Action In\n");
+ goto illegal_request;
+ case REPORT_LUNS:
+ if (req->cmd.xfer < 16)
+ goto illegal_request;
+ memset(outbuf, 0, 16);
+ outbuf[3] = 8;
+ buflen = 16;
+ break;
+ case VERIFY:
+ break;
+ default:
+ goto illegal_request;
+ }
+ scsi_req_set_status(req, GOOD, NO_SENSE);
+ return buflen;
+
+not_ready:
+ scsi_req_set_status(req, CHECK_CONDITION, NOT_READY);
+ return 0;
+
+illegal_request:
+ scsi_req_set_status(req, CHECK_CONDITION, ILLEGAL_REQUEST);
+ return 0;
}
/* Execute a scsi command. Returns the length of the data expected by the
static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
uint8_t *buf, int lun)
{
- SCSIDeviceState *s = d->state;
- uint64_t nb_sectors;
- uint32_t lba;
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
+ uint64_t lba;
uint32_t len;
int cmdlen;
int is_write;
uint8_t command;
uint8_t *outbuf;
- SCSIRequest *r;
+ SCSIDiskReq *r;
+ int rc;
command = buf[0];
r = scsi_find_request(s, tag);
}
/* ??? Tags are not unique for different luns. We only implement a
single lun, so this should not matter. */
- r = scsi_new_request(s, tag);
- outbuf = r->dma_buf;
+ r = scsi_new_request(d, tag, lun);
+ outbuf = (uint8_t *)r->iov.iov_base;
is_write = 0;
DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]);
switch (command >> 5) {
case 0:
- lba = buf[3] | (buf[2] << 8) | ((buf[1] & 0x1f) << 16);
+ lba = (uint64_t) buf[3] | ((uint64_t) buf[2] << 8) |
+ (((uint64_t) buf[1] & 0x1f) << 16);
len = buf[4];
cmdlen = 6;
break;
case 1:
case 2:
- lba = buf[5] | (buf[4] << 8) | (buf[3] << 16) | (buf[2] << 24);
+ lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) |
+ ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24);
len = buf[8] | (buf[7] << 8);
cmdlen = 10;
break;
case 4:
- lba = buf[5] | (buf[4] << 8) | (buf[3] << 16) | (buf[2] << 24);
+ lba = (uint64_t) buf[9] | ((uint64_t) buf[8] << 8) |
+ ((uint64_t) buf[7] << 16) | ((uint64_t) buf[6] << 24) |
+ ((uint64_t) buf[5] << 32) | ((uint64_t) buf[4] << 40) |
+ ((uint64_t) buf[3] << 48) | ((uint64_t) buf[2] << 56);
len = buf[13] | (buf[12] << 8) | (buf[11] << 16) | (buf[10] << 24);
cmdlen = 16;
break;
case 5:
- lba = buf[5] | (buf[4] << 8) | (buf[3] << 16) | (buf[2] << 24);
+ lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) |
+ ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24);
len = buf[9] | (buf[8] << 8) | (buf[7] << 16) | (buf[6] << 24);
cmdlen = 12;
break;
printf("\n");
}
#endif
+
+ if (scsi_req_parse(&r->req, buf) != 0) {
+ BADF("Unsupported command length, command %x\n", command);
+ goto fail;
+ }
+ assert(r->req.cmd.len == cmdlen);
+ assert(r->req.cmd.lba == lba);
+
if (lun || buf[1] >> 5) {
/* Only LUN 0 supported. */
DPRINTF("Unimplemented LUN %d\n", lun ? lun : buf[1] >> 5);
- if (command != 0x03 && command != 0x12) /* REQUEST SENSE and INQUIRY */
+ if (command != REQUEST_SENSE && command != INQUIRY)
goto fail;
}
switch (command) {
- case 0x0:
- DPRINTF("Test Unit Ready\n");
- break;
- case 0x03:
- DPRINTF("Request Sense (len %d)\n", len);
- if (len < 4)
- goto fail;
- memset(outbuf, 0, 4);
- outbuf[0] = 0xf0;
- outbuf[1] = 0;
- outbuf[2] = s->sense;
- r->buf_len = 4;
- break;
- case 0x12:
- DPRINTF("Inquiry (len %d)\n", len);
- if (buf[1] & 0x2) {
- /* Command support data - optional, not implemented */
- BADF("optional INQUIRY command support request not implemented\n");
- goto fail;
- }
- else if (buf[1] & 0x1) {
- /* Vital product data */
- uint8_t page_code = buf[2];
- if (len < 4) {
- BADF("Error: Inquiry (EVPD[%02X]) buffer size %d is "
- "less than 4\n", page_code, len);
- goto fail;
- }
-
- switch (page_code) {
- case 0x00:
- {
- /* Supported page codes, mandatory */
- DPRINTF("Inquiry EVPD[Supported pages] "
- "buffer size %d\n", len);
-
- r->buf_len = 0;
-
- if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
- outbuf[r->buf_len++] = 5;
- } else {
- outbuf[r->buf_len++] = 0;
- }
-
- outbuf[r->buf_len++] = 0x00; // this page
- outbuf[r->buf_len++] = 0x00;
- outbuf[r->buf_len++] = 3; // number of pages
- outbuf[r->buf_len++] = 0x00; // list of supported pages (this page)
- outbuf[r->buf_len++] = 0x80; // unit serial number
- outbuf[r->buf_len++] = 0x83; // device identification
- }
- break;
- case 0x80:
- {
- /* Device serial number, optional */
- if (len < 4) {
- BADF("Error: EVPD[Serial number] Inquiry buffer "
- "size %d too small, %d needed\n", len, 4);
- goto fail;
- }
-
- DPRINTF("Inquiry EVPD[Serial number] buffer size %d\n", len);
-
- r->buf_len = 0;
-
- /* Supported page codes */
- if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
- outbuf[r->buf_len++] = 5;
- } else {
- outbuf[r->buf_len++] = 0;
- }
-
- outbuf[r->buf_len++] = 0x80; // this page
- outbuf[r->buf_len++] = 0x00;
- outbuf[r->buf_len++] = 0x01; // 1 byte data follow
-
- outbuf[r->buf_len++] = '0'; // 1 byte data follow
- }
-
- break;
- case 0x83:
- {
- /* Device identification page, mandatory */
- int max_len = 255 - 8;
- int id_len = strlen(bdrv_get_device_name(s->bdrv));
- if (id_len > max_len)
- id_len = max_len;
-
- DPRINTF("Inquiry EVPD[Device identification] "
- "buffer size %d\n", len);
- r->buf_len = 0;
- if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
- outbuf[r->buf_len++] = 5;
- } else {
- outbuf[r->buf_len++] = 0;
- }
-
- outbuf[r->buf_len++] = 0x83; // this page
- outbuf[r->buf_len++] = 0x00;
- outbuf[r->buf_len++] = 3 + id_len;
-
- outbuf[r->buf_len++] = 0x2; // ASCII
- outbuf[r->buf_len++] = 0; // not officially assigned
- outbuf[r->buf_len++] = 0; // reserved
- outbuf[r->buf_len++] = id_len; // length of data following
-
- memcpy(&outbuf[r->buf_len],
- bdrv_get_device_name(s->bdrv), id_len);
- r->buf_len += id_len;
- }
- break;
- default:
- BADF("Error: unsupported Inquiry (EVPD[%02X]) "
- "buffer size %d\n", page_code, len);
- goto fail;
- }
- /* done with EVPD */
- break;
- }
- else {
- /* Standard INQUIRY data */
- if (buf[2] != 0) {
- BADF("Error: Inquiry (STANDARD) page or code "
- "is non-zero [%02X]\n", buf[2]);
- goto fail;
- }
-
- /* PAGE CODE == 0 */
- if (len < 5) {
- BADF("Error: Inquiry (STANDARD) buffer size %d "
- "is less than 5\n", len);
- goto fail;
- }
-
- if (len < 36) {
- BADF("Error: Inquiry (STANDARD) buffer size %d "
- "is less than 36 (TODO: only 5 required)\n", len);
- }
- }
- memset(outbuf, 0, 36);
-
- if (lun || buf[1] >> 5) {
- outbuf[0] = 0x7f; /* LUN not supported */
- } else if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
- outbuf[0] = 5;
- outbuf[1] = 0x80;
- memcpy(&outbuf[16], "QEMU CD-ROM ", 16);
- } else {
- outbuf[0] = 0;
- memcpy(&outbuf[16], "QEMU HARDDISK ", 16);
- }
- memcpy(&outbuf[8], "QEMU ", 8);
- memcpy(&outbuf[32], QEMU_VERSION, 4);
- /* Identify device as SCSI-3 rev 1.
- Some later commands are also implemented. */
- outbuf[2] = 3;
- outbuf[3] = 2; /* Format 2 */
- outbuf[4] = 31;
- /* Sync data transfer and TCQ. */
- outbuf[7] = 0x10 | (s->tcq ? 0x02 : 0);
- r->buf_len = 36;
- break;
- case 0x16:
- DPRINTF("Reserve(6)\n");
- if (buf[1] & 1)
- goto fail;
- break;
- case 0x17:
- DPRINTF("Release(6)\n");
- if (buf[1] & 1)
- goto fail;
- break;
- case 0x1a:
- case 0x5a:
- {
- uint8_t *p;
- int page;
-
- page = buf[2] & 0x3f;
- DPRINTF("Mode Sense (page %d, len %d)\n", page, len);
- p = outbuf;
- memset(p, 0, 4);
- outbuf[1] = 0; /* Default media type. */
- outbuf[3] = 0; /* Block descriptor length. */
- if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
- outbuf[2] = 0x80; /* Readonly. */
- }
- p += 4;
- if (page == 4) {
- int cylinders, heads, secs;
-
- /* Rigid disk device geometry page. */
- p[0] = 4;
- p[1] = 0x16;
- /* if a geometry hint is available, use it */
- bdrv_get_geometry_hint(s->bdrv, &cylinders, &heads, &secs);
- p[2] = (cylinders >> 16) & 0xff;
- p[3] = (cylinders >> 8) & 0xff;
- p[4] = cylinders & 0xff;
- p[5] = heads & 0xff;
- /* Write precomp start cylinder, disabled */
- p[6] = (cylinders >> 16) & 0xff;
- p[7] = (cylinders >> 8) & 0xff;
- p[8] = cylinders & 0xff;
- /* Reduced current start cylinder, disabled */
- p[9] = (cylinders >> 16) & 0xff;
- p[10] = (cylinders >> 8) & 0xff;
- p[11] = cylinders & 0xff;
- /* Device step rate [ns], 200ns */
- p[12] = 0;
- p[13] = 200;
- /* Landing zone cylinder */
- p[14] = 0xff;
- p[15] = 0xff;
- p[16] = 0xff;
- /* Medium rotation rate [rpm], 5400 rpm */
- p[20] = (5400 >> 8) & 0xff;
- p[21] = 5400 & 0xff;
- p += 0x16;
- } else if (page == 5) {
- int cylinders, heads, secs;
-
- /* Flexible disk device geometry page. */
- p[0] = 5;
- p[1] = 0x1e;
- /* Transfer rate [kbit/s], 5Mbit/s */
- p[2] = 5000 >> 8;
- p[3] = 5000 & 0xff;
- /* if a geometry hint is available, use it */
- bdrv_get_geometry_hint(s->bdrv, &cylinders, &heads, &secs);
- p[4] = heads & 0xff;
- p[5] = secs & 0xff;
- p[6] = s->cluster_size * 2;
- p[8] = (cylinders >> 8) & 0xff;
- p[9] = cylinders & 0xff;
- /* Write precomp start cylinder, disabled */
- p[10] = (cylinders >> 8) & 0xff;
- p[11] = cylinders & 0xff;
- /* Reduced current start cylinder, disabled */
- p[12] = (cylinders >> 8) & 0xff;
- p[13] = cylinders & 0xff;
- /* Device step rate [100us], 100us */
- p[14] = 0;
- p[15] = 1;
- /* Device step pulse width [us], 1us */
- p[16] = 1;
- /* Device head settle delay [100us], 100us */
- p[17] = 0;
- p[18] = 1;
- /* Motor on delay [0.1s], 0.1s */
- p[19] = 1;
- /* Motor off delay [0.1s], 0.1s */
- p[20] = 1;
- /* Medium rotation rate [rpm], 5400 rpm */
- p[28] = (5400 >> 8) & 0xff;
- p[29] = 5400 & 0xff;
- p += 0x1e;
- } else if ((page == 8 || page == 0x3f)) {
- /* Caching page. */
- memset(p,0,20);
- p[0] = 8;
- p[1] = 0x12;
- p[2] = 4; /* WCE */
- p += 20;
- }
- if ((page == 0x3f || page == 0x2a)
- && (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM)) {
- /* CD Capabilities and Mechanical Status page. */
- p[0] = 0x2a;
- p[1] = 0x14;
- p[2] = 3; // CD-R & CD-RW read
- p[3] = 0; // Writing not supported
- p[4] = 0x7f; /* Audio, composite, digital out,
- mode 2 form 1&2, multi session */
- p[5] = 0xff; /* CD DA, DA accurate, RW supported,
- RW corrected, C2 errors, ISRC,
- UPC, Bar code */
- p[6] = 0x2d | (bdrv_is_locked(s->bdrv)? 2 : 0);
- /* Locking supported, jumper present, eject, tray */
- p[7] = 0; /* no volume & mute control, no
- changer */
- p[8] = (50 * 176) >> 8; // 50x read speed
- p[9] = (50 * 176) & 0xff;
- p[10] = 0 >> 8; // No volume
- p[11] = 0 & 0xff;
- p[12] = 2048 >> 8; // 2M buffer
- p[13] = 2048 & 0xff;
- p[14] = (16 * 176) >> 8; // 16x read speed current
- p[15] = (16 * 176) & 0xff;
- p[18] = (16 * 176) >> 8; // 16x write speed
- p[19] = (16 * 176) & 0xff;
- p[20] = (16 * 176) >> 8; // 16x write speed current
- p[21] = (16 * 176) & 0xff;
- p += 22;
- }
- r->buf_len = p - outbuf;
- outbuf[0] = r->buf_len - 4;
- if (r->buf_len > len)
- r->buf_len = len;
- }
- break;
- case 0x1b:
- DPRINTF("Start Stop Unit\n");
- break;
- case 0x1e:
- DPRINTF("Prevent Allow Medium Removal (prevent = %d)\n", buf[4] & 3);
- bdrv_set_locked(s->bdrv, buf[4] & 1);
- break;
- case 0x25:
- DPRINTF("Read Capacity\n");
- /* The normal LEN field for this command is zero. */
- memset(outbuf, 0, 8);
- bdrv_get_geometry(s->bdrv, &nb_sectors);
- /* Returned value is the address of the last sector. */
- if (nb_sectors) {
- nb_sectors--;
- outbuf[0] = (nb_sectors >> 24) & 0xff;
- outbuf[1] = (nb_sectors >> 16) & 0xff;
- outbuf[2] = (nb_sectors >> 8) & 0xff;
- outbuf[3] = nb_sectors & 0xff;
- outbuf[4] = 0;
- outbuf[5] = 0;
- outbuf[6] = s->cluster_size * 2;
- outbuf[7] = 0;
- r->buf_len = 8;
+ case TEST_UNIT_READY:
+ case REQUEST_SENSE:
+ case INQUIRY:
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ case RESERVE:
+ case RESERVE_10:
+ case RELEASE:
+ case RELEASE_10:
+ case START_STOP:
+ case ALLOW_MEDIUM_REMOVAL:
+ case READ_CAPACITY:
+ case SYNCHRONIZE_CACHE:
+ case READ_TOC:
+ case GET_CONFIGURATION:
+ case SERVICE_ACTION_IN:
+ case REPORT_LUNS:
+ case VERIFY:
+ rc = scsi_disk_emulate_command(&r->req, outbuf);
+ if (rc > 0) {
+ r->iov.iov_len = rc;
} else {
- scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_NOT_READY);
+ scsi_req_complete(&r->req);
+ scsi_remove_request(r);
return 0;
}
- break;
- case 0x08:
- case 0x28:
- DPRINTF("Read (sector %d, count %d)\n", lba, len);
+ break;
+ case READ_6:
+ case READ_10:
+ case READ_12:
+ case READ_16:
+ DPRINTF("Read (sector %" PRId64 ", count %d)\n", lba, len);
+ if (lba > s->max_lba)
+ goto illegal_lba;
r->sector = lba * s->cluster_size;
r->sector_count = len * s->cluster_size;
break;
- case 0x0a:
- case 0x2a:
- DPRINTF("Write (sector %d, count %d)\n", lba, len);
+ case WRITE_6:
+ case WRITE_10:
+ case WRITE_12:
+ case WRITE_16:
+ DPRINTF("Write (sector %" PRId64 ", count %d)\n", lba, len);
+ if (lba > s->max_lba)
+ goto illegal_lba;
r->sector = lba * s->cluster_size;
r->sector_count = len * s->cluster_size;
is_write = 1;
break;
- case 0x35:
- DPRINTF("Synchronise cache (sector %d, count %d)\n", lba, len);
- bdrv_flush(s->bdrv);
- break;
- case 0x43:
- {
- int start_track, format, msf, toclen;
-
- msf = buf[1] & 2;
- format = buf[2] & 0xf;
- start_track = buf[6];
- bdrv_get_geometry(s->bdrv, &nb_sectors);
- DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
- switch(format) {
- case 0:
- toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
- break;
- case 1:
- /* multi session : only a single session defined */
- toclen = 12;
- memset(outbuf, 0, 12);
- outbuf[1] = 0x0a;
- outbuf[2] = 0x01;
- outbuf[3] = 0x01;
- break;
- case 2:
- toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
- break;
- default:
- goto error_cmd;
- }
- if (toclen > 0) {
- if (len > toclen)
- len = toclen;
- r->buf_len = len;
- break;
- }
- error_cmd:
- DPRINTF("Read TOC error\n");
- goto fail;
- }
- case 0x46:
- DPRINTF("Get Configuration (rt %d, maxlen %d)\n", buf[1] & 3, len);
- memset(outbuf, 0, 8);
- /* ??? This should probably return much more information. For now
- just return the basic header indicating the CD-ROM profile. */
- outbuf[7] = 8; // CD-ROM
- r->buf_len = 8;
- break;
- case 0x56:
- DPRINTF("Reserve(10)\n");
- if (buf[1] & 3)
- goto fail;
- break;
- case 0x57:
- DPRINTF("Release(10)\n");
- if (buf[1] & 3)
- goto fail;
- break;
- case 0xa0:
- DPRINTF("Report LUNs (len %d)\n", len);
- if (len < 16)
- goto fail;
- memset(outbuf, 0, 16);
- outbuf[3] = 8;
- r->buf_len = 16;
- break;
- case 0x2f:
- DPRINTF("Verify (sector %d, count %d)\n", lba, len);
- break;
default:
DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
fail:
- scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_ILLEGAL_REQUEST);
+ scsi_command_complete(r, CHECK_CONDITION, ILLEGAL_REQUEST);
return 0;
+ illegal_lba:
+ scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
+ return 0;
}
- if (r->sector_count == 0 && r->buf_len == 0) {
- scsi_command_complete(r, STATUS_GOOD, SENSE_NO_SENSE);
+ if (r->sector_count == 0 && r->iov.iov_len == 0) {
+ scsi_command_complete(r, GOOD, NO_SENSE);
}
- len = r->sector_count * 512 + r->buf_len;
+ len = r->sector_count * 512 + r->iov.iov_len;
if (is_write) {
return -len;
} else {
}
}
-static void scsi_destroy(SCSIDevice *d)
+static void scsi_destroy(SCSIDevice *dev)
{
- qemu_free(d->state);
- qemu_free(d);
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
+ SCSIDiskReq *r;
+
+ while (!QTAILQ_EMPTY(&s->qdev.requests)) {
+ r = DO_UPCAST(SCSIDiskReq, req, QTAILQ_FIRST(&s->qdev.requests));
+ scsi_remove_request(r);
+ }
+ drive_uninit(s->qdev.conf.dinfo);
}
-SCSIDevice *scsi_disk_init(BlockDriverState *bdrv, int tcq,
- scsi_completionfn completion, void *opaque)
+static int scsi_disk_initfn(SCSIDevice *dev)
{
- SCSIDevice *d;
- SCSIDeviceState *s;
-
- s = (SCSIDeviceState *)qemu_mallocz(sizeof(SCSIDeviceState));
- s->bdrv = bdrv;
- s->tcq = tcq;
- s->completion = completion;
- s->opaque = opaque;
- if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
- s->cluster_size = 4;
+ SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
+ uint64_t nb_sectors;
+
+ if (!s->qdev.conf.dinfo || !s->qdev.conf.dinfo->bdrv) {
+ error_report("scsi-disk: drive property not set");
+ return -1;
+ }
+ s->bs = s->qdev.conf.dinfo->bdrv;
+
+ if (bdrv_is_sg(s->bs)) {
+ error_report("scsi-disk: unwanted /dev/sg*");
+ return -1;
+ }
+
+ if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+ s->qdev.blocksize = 2048;
} else {
- s->cluster_size = 1;
+ s->qdev.blocksize = s->qdev.conf.logical_block_size;
}
+ s->cluster_size = s->qdev.blocksize / 512;
+
+ s->qdev.type = TYPE_DISK;
+ bdrv_get_geometry(s->bs, &nb_sectors);
+ nb_sectors /= s->cluster_size;
+ if (nb_sectors)
+ nb_sectors--;
+ s->max_lba = nb_sectors;
+ qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s);
+ return 0;
+}
- d = (SCSIDevice *)qemu_mallocz(sizeof(SCSIDevice));
- d->state = s;
- d->destroy = scsi_destroy;
- d->send_command = scsi_send_command;
- d->read_data = scsi_read_data;
- d->write_data = scsi_write_data;
- d->cancel_io = scsi_cancel_io;
- d->get_buf = scsi_get_buf;
+static SCSIDeviceInfo scsi_disk_info = {
+ .qdev.name = "scsi-disk",
+ .qdev.desc = "virtual scsi disk or cdrom",
+ .qdev.size = sizeof(SCSIDiskState),
+ .init = scsi_disk_initfn,
+ .destroy = scsi_destroy,
+ .send_command = scsi_send_command,
+ .read_data = scsi_read_data,
+ .write_data = scsi_write_data,
+ .cancel_io = scsi_cancel_io,
+ .get_buf = scsi_get_buf,
+ .qdev.props = (Property[]) {
+ DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),
+ DEFINE_PROP_STRING("ver", SCSIDiskState, version),
+ DEFINE_PROP_END_OF_LIST(),
+ },
+};
- return d;
+static void scsi_disk_register_devices(void)
+{
+ scsi_qdev_register(&scsi_disk_info);
}
+device_init(scsi_disk_register_devices)
projects / qemu.git / blobdiff