#include "hw/scsi/scsi.h"
#include "sysemu/dma.h"
#include "qemu/log.h"
-
-//#define DEBUG_LSI
-//#define DEBUG_LSI_REG
-
-#ifdef DEBUG_LSI
-#define DPRINTF(fmt, ...) \
-do { printf("lsi_scsi: " fmt , ## __VA_ARGS__); } while (0)
-#define BADF(fmt, ...) \
-do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
-#else
-#define DPRINTF(fmt, ...) do {} while(0)
-#define BADF(fmt, ...) \
-do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__);} while (0)
-#endif
+#include "trace.h"
static const char *names[] = {
"SCNTL0", "SCNTL1", "SCNTL2", "SCNTL3", "SCID", "SXFER", "SDID", "GPREG",
PCIDevice parent_obj;
/*< public >*/
+ qemu_irq ext_irq;
MemoryRegion mmio_io;
MemoryRegion ram_io;
MemoryRegion io_io;
static void lsi_soft_reset(LSIState *s)
{
- DPRINTF("Reset\n");
+ trace_lsi_reset();
s->carry = 0;
s->msg_action = 0;
s->istat1 &= ~LSI_ISTAT1_SRUN;
}
-static void lsi_update_irq(LSIState *s)
+static void lsi_set_irq(LSIState *s, int level)
{
PCIDevice *d = PCI_DEVICE(s);
+
+ if (s->ext_irq) {
+ qemu_set_irq(s->ext_irq, level);
+ } else {
+ pci_set_irq(d, level);
+ }
+}
+
+static void lsi_update_irq(LSIState *s)
+{
int level;
static int last_level;
lsi_request *p;
level = 1;
if (level != last_level) {
- DPRINTF("Update IRQ level %d dstat %02x sist %02x%02x\n",
- level, s->dstat, s->sist1, s->sist0);
+ trace_lsi_update_irq(level, s->dstat, s->sist1, s->sist0);
last_level = level;
}
- pci_set_irq(d, level);
+ lsi_set_irq(s, level);
if (!level && lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON)) {
- DPRINTF("Handled IRQs & disconnected, looking for pending "
- "processes\n");
+ trace_lsi_update_irq_disconnected();
QTAILQ_FOREACH(p, &s->queue, next) {
if (p->pending) {
lsi_reselect(s, p);
uint32_t mask0;
uint32_t mask1;
- DPRINTF("SCSI Interrupt 0x%02x%02x prev 0x%02x%02x\n",
- stat1, stat0, s->sist1, s->sist0);
+ trace_lsi_script_scsi_interrupt(stat1, stat0, s->sist1, s->sist0);
s->sist0 |= stat0;
s->sist1 |= stat1;
/* Stop processor on fatal or unmasked interrupt. As a special hack
/* Stop SCRIPTS execution and raise a DMA interrupt. */
static void lsi_script_dma_interrupt(LSIState *s, int stat)
{
- DPRINTF("DMA Interrupt 0x%x prev 0x%x\n", stat, s->dstat);
+ trace_lsi_script_dma_interrupt(stat, s->dstat);
s->dstat |= stat;
lsi_update_irq(s);
lsi_stop_script(s);
} else {
s->dsp = (s->scntl2 & LSI_SCNTL2_WSR ? s->pmjad2 : s->pmjad1);
}
- DPRINTF("Data phase mismatch jump to %08x\n", s->dsp);
+ trace_lsi_bad_phase_jump(s->dsp);
} else {
- DPRINTF("Phase mismatch interrupt\n");
+ trace_lsi_bad_phase_interrupt();
lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0);
lsi_stop_script(s);
}
static void lsi_bad_selection(LSIState *s, uint32_t id)
{
- DPRINTF("Selected absent target %d\n", id);
+ trace_lsi_bad_selection(id);
lsi_script_scsi_interrupt(s, 0, LSI_SIST1_STO);
lsi_disconnect(s);
}
assert(s->current);
if (!s->current->dma_len) {
/* Wait until data is available. */
- DPRINTF("DMA no data available\n");
+ trace_lsi_do_dma_unavailable();
return;
}
else if (s->sbms)
addr |= ((uint64_t)s->sbms << 32);
- DPRINTF("DMA addr=0x" DMA_ADDR_FMT " len=%d\n", addr, count);
+ trace_lsi_do_dma(addr, count);
s->csbc += count;
s->dnad += count;
s->dbc -= count;
{
lsi_request *p = s->current;
- DPRINTF("Queueing tag=0x%x\n", p->tag);
+ trace_lsi_queue_command(p->tag);
assert(s->current != NULL);
assert(s->current->dma_len == 0);
QTAILQ_INSERT_TAIL(&s->queue, s->current, next);
static void lsi_add_msg_byte(LSIState *s, uint8_t data)
{
if (s->msg_len >= LSI_MAX_MSGIN_LEN) {
- BADF("MSG IN data too long\n");
+ trace_lsi_add_msg_byte_error();
} else {
- DPRINTF("MSG IN 0x%02x\n", data);
+ trace_lsi_add_msg_byte(data);
s->msg[s->msg_len++] = data;
}
}
if (!(s->dcntl & LSI_DCNTL_COM)) {
s->sfbr = 1 << (id & 0x7);
}
- DPRINTF("Reselected target %d\n", id);
+ trace_lsi_reselect(id);
s->scntl1 |= LSI_SCNTL1_CON;
lsi_set_phase(s, PHASE_MI);
s->msg_action = p->out ? 2 : 3;
lsi_request *p = req->hba_private;
if (p->pending) {
- BADF("Multiple IO pending for request %p\n", p);
+ trace_lsi_queue_req_error(p);
}
p->pending = len;
/* Reselect if waiting for it, or if reselection triggers an IRQ
lsi_reselect(s, p);
return 0;
} else {
- DPRINTF("Queueing IO tag=0x%x\n", p->tag);
+ trace_lsi_queue_req(p->tag);
p->pending = len;
return 1;
}
int out;
out = (s->sstat1 & PHASE_MASK) == PHASE_DO;
- DPRINTF("Command complete status=%d\n", (int)status);
+ trace_lsi_command_complete(status);
s->status = status;
s->command_complete = 2;
if (s->waiting && s->dbc != 0) {
out = (s->sstat1 & PHASE_MASK) == PHASE_DO;
/* host adapter (re)connected */
- DPRINTF("Data ready tag=0x%x len=%d\n", req->tag, len);
+ trace_lsi_transfer_data(req->tag, len);
s->current->dma_len = len;
s->command_complete = 1;
if (s->waiting) {
uint32_t id;
int n;
- DPRINTF("Send command len=%d\n", s->dbc);
+ trace_lsi_do_command(s->dbc);
if (s->dbc > 16)
s->dbc = 16;
pci_dma_read(PCI_DEVICE(s), s->dnad, buf, s->dbc);
static void lsi_do_status(LSIState *s)
{
uint8_t status;
- DPRINTF("Get status len=%d status=%d\n", s->dbc, s->status);
- if (s->dbc != 1)
- BADF("Bad Status move\n");
+ trace_lsi_do_status(s->dbc, s->status);
+ if (s->dbc != 1) {
+ trace_lsi_do_status_error();
+ }
s->dbc = 1;
status = s->status;
s->sfbr = status;
static void lsi_do_msgin(LSIState *s)
{
int len;
- DPRINTF("Message in len=%d/%d\n", s->dbc, s->msg_len);
+ trace_lsi_do_msgin(s->dbc, s->msg_len);
s->sfbr = s->msg[0];
len = s->msg_len;
if (len > s->dbc)
current_req = lsi_find_by_tag(s, current_tag);
}
- DPRINTF("MSG out len=%d\n", s->dbc);
+ trace_lsi_do_msgout(s->dbc);
while (s->dbc) {
msg = lsi_get_msgbyte(s);
s->sfbr = msg;
switch (msg) {
case 0x04:
- DPRINTF("MSG: Disconnect\n");
+ trace_lsi_do_msgout_disconnect();
lsi_disconnect(s);
break;
case 0x08:
- DPRINTF("MSG: No Operation\n");
+ trace_lsi_do_msgout_noop();
lsi_set_phase(s, PHASE_CMD);
break;
case 0x01:
len = lsi_get_msgbyte(s);
msg = lsi_get_msgbyte(s);
(void)len; /* avoid a warning about unused variable*/
- DPRINTF("Extended message 0x%x (len %d)\n", msg, len);
+ trace_lsi_do_msgout_extended(msg, len);
switch (msg) {
case 1:
- DPRINTF("SDTR (ignored)\n");
+ trace_lsi_do_msgout_ignored("SDTR");
lsi_skip_msgbytes(s, 2);
break;
case 3:
- DPRINTF("WDTR (ignored)\n");
+ trace_lsi_do_msgout_ignored("WDTR");
lsi_skip_msgbytes(s, 1);
break;
+ case 4:
+ trace_lsi_do_msgout_ignored("PPR");
+ lsi_skip_msgbytes(s, 5);
+ break;
default:
goto bad;
}
break;
case 0x20: /* SIMPLE queue */
s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
- DPRINTF("SIMPLE queue tag=0x%x\n", s->select_tag & 0xff);
+ trace_lsi_do_msgout_simplequeue(s->select_tag & 0xff);
break;
case 0x21: /* HEAD of queue */
- BADF("HEAD queue not implemented\n");
+ qemu_log_mask(LOG_UNIMP, "lsi_scsi: HEAD queue not implemented\n");
s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
break;
case 0x22: /* ORDERED queue */
- BADF("ORDERED queue not implemented\n");
+ qemu_log_mask(LOG_UNIMP,
+ "lsi_scsi: ORDERED queue not implemented\n");
s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
break;
case 0x0d:
/* The ABORT TAG message clears the current I/O process only. */
- DPRINTF("MSG: ABORT TAG tag=0x%x\n", current_tag);
+ trace_lsi_do_msgout_abort(current_tag);
if (current_req) {
scsi_req_cancel(current_req->req);
}
/* The ABORT message clears all I/O processes for the selecting
initiator on the specified logical unit of the target. */
if (msg == 0x06) {
- DPRINTF("MSG: ABORT tag=0x%x\n", current_tag);
+ trace_lsi_do_msgout_abort(current_tag);
}
/* The CLEAR QUEUE message clears all I/O processes for all
initiators on the specified logical unit of the target. */
if (msg == 0x0e) {
- DPRINTF("MSG: CLEAR QUEUE tag=0x%x\n", current_tag);
+ trace_lsi_do_msgout_clearqueue(current_tag);
}
/* The BUS DEVICE RESET message clears all I/O processes for all
initiators on all logical units of the target. */
if (msg == 0x0c) {
- DPRINTF("MSG: BUS DEVICE RESET tag=0x%x\n", current_tag);
+ trace_lsi_do_msgout_busdevicereset(current_tag);
}
/* clear the current I/O process */
goto bad;
}
s->current_lun = msg & 7;
- DPRINTF("Select LUN %d\n", s->current_lun);
+ trace_lsi_do_msgout_select(s->current_lun);
lsi_set_phase(s, PHASE_CMD);
break;
}
}
return;
bad:
- BADF("Unimplemented message 0x%02x\n", msg);
+ qemu_log_mask(LOG_UNIMP, "Unimplemented message 0x%02x\n", msg);
lsi_set_phase(s, PHASE_MI);
lsi_add_msg_byte(s, 7); /* MESSAGE REJECT */
s->msg_action = 0;
int n;
uint8_t buf[LSI_BUF_SIZE];
- DPRINTF("memcpy dest 0x%08x src 0x%08x count %d\n", dest, src, count);
+ trace_lsi_memcpy(dest, src, count);
while (count) {
n = (count > LSI_BUF_SIZE) ? LSI_BUF_SIZE : count;
lsi_mem_read(s, src, buf, n);
{
lsi_request *p;
- DPRINTF("Wait Reselect\n");
+ trace_lsi_wait_reselect();
QTAILQ_FOREACH(p, &s->queue, next) {
if (p->pending) {
}
addr = read_dword(s, s->dsp + 4);
addr_high = 0;
- DPRINTF("SCRIPTS dsp=%08x opcode %08x arg %08x\n", s->dsp, insn, addr);
+ trace_lsi_execute_script(s->dsp, insn, addr);
s->dsps = addr;
s->dcmd = insn >> 24;
s->dsp += 8;
switch (insn >> 30) {
case 0: /* Block move. */
if (s->sist1 & LSI_SIST1_STO) {
- DPRINTF("Delayed select timeout\n");
+ trace_lsi_execute_script_blockmove_delayed();
lsi_stop_script(s);
break;
}
addr_high = s->dbms;
break;
default:
- BADF("Illegal selector specified (0x%x > 0x15)"
- " for 64-bit DMA block move", selector);
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "lsi_scsi: Illegal selector specified (0x%x > 0x15) "
+ "for 64-bit DMA block move", selector);
break;
}
}
s->ia = s->dsp - 12;
}
if ((s->sstat1 & PHASE_MASK) != ((insn >> 24) & 7)) {
- DPRINTF("Wrong phase got %d expected %d\n",
- s->sstat1 & PHASE_MASK, (insn >> 24) & 7);
+ trace_lsi_execute_script_blockmove_badphase(s->sstat1 & PHASE_MASK,
+ (insn >> 24) & 7);
lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0);
break;
}
lsi_do_msgin(s);
break;
default:
- BADF("Unimplemented phase %d\n", s->sstat1 & PHASE_MASK);
- exit(1);
+ qemu_log_mask(LOG_UNIMP, "lsi_scsi: Unimplemented phase %d\n",
+ s->sstat1 & PHASE_MASK);
}
s->dfifo = s->dbc & 0xff;
s->ctest5 = (s->ctest5 & 0xfc) | ((s->dbc >> 8) & 3);
case 0: /* Select */
s->sdid = id;
if (s->scntl1 & LSI_SCNTL1_CON) {
- DPRINTF("Already reselected, jumping to alternative address\n");
+ trace_lsi_execute_script_io_alreadyreselected();
s->dsp = s->dnad;
break;
}
lsi_bad_selection(s, id);
break;
}
- DPRINTF("Selected target %d%s\n",
- id, insn & (1 << 3) ? " ATN" : "");
+ trace_lsi_execute_script_io_selected(id,
+ insn & (1 << 3) ? " ATN" : "");
/* ??? Linux drivers compain when this is set. Maybe
it only applies in low-level mode (unimplemented).
lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */
lsi_set_phase(s, PHASE_MO);
break;
case 1: /* Disconnect */
- DPRINTF("Wait Disconnect\n");
+ trace_lsi_execute_script_io_disconnect();
s->scntl1 &= ~LSI_SCNTL1_CON;
break;
case 2: /* Wait Reselect */
}
break;
case 3: /* Set */
- DPRINTF("Set%s%s%s%s\n",
+ trace_lsi_execute_script_io_set(
insn & (1 << 3) ? " ATN" : "",
insn & (1 << 6) ? " ACK" : "",
insn & (1 << 9) ? " TM" : "",
lsi_set_phase(s, PHASE_MO);
}
if (insn & (1 << 9)) {
- BADF("Target mode not implemented\n");
- exit(1);
+ qemu_log_mask(LOG_UNIMP,
+ "lsi_scsi: Target mode not implemented\n");
}
if (insn & (1 << 10))
s->carry = 1;
break;
case 4: /* Clear */
- DPRINTF("Clear%s%s%s%s\n",
+ trace_lsi_execute_script_io_clear(
insn & (1 << 3) ? " ATN" : "",
insn & (1 << 6) ? " ACK" : "",
insn & (1 << 9) ? " TM" : "",
uint8_t data8;
int reg;
int operator;
-#ifdef DEBUG_LSI
+
static const char *opcode_names[3] =
{"Write", "Read", "Read-Modify-Write"};
static const char *operator_names[8] =
{"MOV", "SHL", "OR", "XOR", "AND", "SHR", "ADD", "ADC"};
-#endif
reg = ((insn >> 16) & 0x7f) | (insn & 0x80);
data8 = (insn >> 8) & 0xff;
opcode = (insn >> 27) & 7;
operator = (insn >> 24) & 7;
- DPRINTF("%s reg 0x%x %s data8=0x%02x sfbr=0x%02x%s\n",
+ trace_lsi_execute_script_io_opcode(
opcode_names[opcode - 5], reg,
operator_names[operator], data8, s->sfbr,
(insn & (1 << 23)) ? " SFBR" : "");
int jmp;
if ((insn & 0x002e0000) == 0) {
- DPRINTF("NOP\n");
+ trace_lsi_execute_script_tc_nop();
break;
}
if (s->sist1 & LSI_SIST1_STO) {
- DPRINTF("Delayed select timeout\n");
+ trace_lsi_execute_script_tc_delayedselect_timeout();
lsi_stop_script(s);
break;
}
cond = jmp = (insn & (1 << 19)) != 0;
if (cond == jmp && (insn & (1 << 21))) {
- DPRINTF("Compare carry %d\n", s->carry == jmp);
+ trace_lsi_execute_script_tc_compc(s->carry == jmp);
cond = s->carry != 0;
}
if (cond == jmp && (insn & (1 << 17))) {
- DPRINTF("Compare phase %d %c= %d\n",
+ trace_lsi_execute_script_tc_compp(
(s->sstat1 & PHASE_MASK),
jmp ? '=' : '!',
((insn >> 24) & 7));
uint8_t mask;
mask = (~insn >> 8) & 0xff;
- DPRINTF("Compare data 0x%x & 0x%x %c= 0x%x\n",
+ trace_lsi_execute_script_tc_compd(
s->sfbr, mask, jmp ? '=' : '!', insn & mask);
cond = (s->sfbr & mask) == (insn & mask);
}
}
switch ((insn >> 27) & 7) {
case 0: /* Jump */
- DPRINTF("Jump to 0x%08x\n", addr);
+ trace_lsi_execute_script_tc_jump(addr);
s->adder = addr;
s->dsp = addr;
break;
case 1: /* Call */
- DPRINTF("Call 0x%08x\n", addr);
+ trace_lsi_execute_script_tc_call(addr);
s->temp = s->dsp;
s->dsp = addr;
break;
case 2: /* Return */
- DPRINTF("Return to 0x%08x\n", s->temp);
+ trace_lsi_execute_script_tc_return(s->temp);
s->dsp = s->temp;
break;
case 3: /* Interrupt */
- DPRINTF("Interrupt 0x%08x\n", s->dsps);
+ trace_lsi_execute_script_tc_interrupt(s->dsps);
if ((insn & (1 << 20)) != 0) {
s->istat0 |= LSI_ISTAT0_INTF;
lsi_update_irq(s);
}
break;
default:
- DPRINTF("Illegal transfer control\n");
+ trace_lsi_execute_script_tc_illegal();
lsi_script_dma_interrupt(s, LSI_DSTAT_IID);
break;
}
} else {
- DPRINTF("Control condition failed\n");
+ trace_lsi_execute_script_tc_cc_failed();
}
}
break;
reg = (insn >> 16) & 0xff;
if (insn & (1 << 24)) {
pci_dma_read(pci_dev, addr, data, n);
- DPRINTF("Load reg 0x%x size %d addr 0x%08x = %08x\n", reg, n,
- addr, *(int *)data);
+ trace_lsi_execute_script_mm_load(reg, n, addr, *(int *)data);
for (i = 0; i < n; i++) {
lsi_reg_writeb(s, reg + i, data[i]);
}
} else {
- DPRINTF("Store reg 0x%x size %d addr 0x%08x\n", reg, n, addr);
+ trace_lsi_execute_script_mm_store(reg, n, addr);
for (i = 0; i < n; i++) {
data[i] = lsi_reg_readb(s, reg + i);
}
assume this is the case and force an unexpected device disconnect.
This is apparently sufficient to beat the drivers into submission.
*/
- if (!(s->sien0 & LSI_SIST0_UDC))
- fprintf(stderr, "inf. loop with UDC masked\n");
+ if (!(s->sien0 & LSI_SIST0_UDC)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "lsi_scsi: inf. loop with UDC masked");
+ }
lsi_script_scsi_interrupt(s, LSI_SIST0_UDC, 0);
lsi_disconnect(s);
} else if (s->istat1 & LSI_ISTAT1_SRUN && !s->waiting) {
goto again;
}
}
- DPRINTF("SCRIPTS execution stopped\n");
+ trace_lsi_execute_script_stop();
}
static uint8_t lsi_reg_readb(LSIState *s, int offset)
#undef CASE_GET_REG24
#undef CASE_GET_REG32
-#ifdef DEBUG_LSI_REG
- DPRINTF("Read reg %s %x = %02x\n",
- offset < ARRAY_SIZE(names) ? names[offset] : "???", offset, ret);
-#endif
+ trace_lsi_reg_read(offset < ARRAY_SIZE(names) ? names[offset] : "???",
+ offset, ret);
return ret;
}
case addr + 2: s->name &= 0xff00ffff; s->name |= val << 16; break; \
case addr + 3: s->name &= 0x00ffffff; s->name |= val << 24; break;
-#ifdef DEBUG_LSI_REG
- DPRINTF("Write reg %s %x = %02x\n",
- offset < ARRAY_SIZE(names) ? names[offset] : "???", offset, val);
-#endif
+ trace_lsi_reg_write(offset < ARRAY_SIZE(names) ? names[offset] : "???",
+ offset, val);
+
switch (offset) {
case 0x00: /* SCNTL0 */
s->scntl0 = val;
if (val & LSI_SCNTL0_START) {
- BADF("Start sequence not implemented\n");
+ qemu_log_mask(LOG_UNIMP,
+ "lsi_scsi: Start sequence not implemented\n");
}
break;
case 0x01: /* SCNTL1 */
s->scntl1 = val & ~LSI_SCNTL1_SST;
if (val & LSI_SCNTL1_IARB) {
- BADF("Immediate Arbritration not implemented\n");
+ qemu_log_mask(LOG_UNIMP,
+ "lsi_scsi: Immediate Arbritration not implemented\n");
}
if (val & LSI_SCNTL1_RST) {
if (!(s->sstat0 & LSI_SSTAT0_RST)) {
break;
case 0x06: /* SDID */
if ((s->ssid & 0x80) && (val & 0xf) != (s->ssid & 0xf)) {
- BADF("Destination ID does not match SSID\n");
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "lsi_scsi: Destination ID does not match SSID\n");
}
s->sdid = val & 0xf;
break;
lsi_update_irq(s);
}
if (s->waiting == 1 && val & LSI_ISTAT0_SIGP) {
- DPRINTF("Woken by SIGP\n");
+ trace_lsi_awoken();
s->waiting = 0;
s->dsp = s->dnad;
lsi_execute_script(s);
CASE_SET_REG32(temp, 0x1c)
case 0x21: /* CTEST4 */
if (val & 7) {
- BADF("Unimplemented CTEST4-FBL 0x%x\n", val);
+ qemu_log_mask(LOG_UNIMP,
+ "lsi_scsi: Unimplemented CTEST4-FBL 0x%x\n", val);
}
s->ctest4 = val;
break;
case 0x22: /* CTEST5 */
if (val & (LSI_CTEST5_ADCK | LSI_CTEST5_BBCK)) {
- BADF("CTEST5 DMA increment not implemented\n");
+ qemu_log_mask(LOG_UNIMP,
+ "lsi_scsi: CTEST5 DMA increment not implemented\n");
}
s->ctest5 = val;
break;
break;
case 0x49: /* STIME1 */
if (val & 0xf) {
- DPRINTF("General purpose timer not implemented\n");
+ qemu_log_mask(LOG_UNIMP,
+ "lsi_scsi: General purpose timer not implemented\n");
/* ??? Raising the interrupt immediately seems to be sufficient
to keep the FreeBSD driver happy. */
lsi_script_scsi_interrupt(s, 0, LSI_SIST1_GEN);
break;
case 0x4e: /* STEST2 */
if (val & 1) {
- BADF("Low level mode not implemented\n");
+ qemu_log_mask(LOG_UNIMP,
+ "lsi_scsi: Low level mode not implemented\n");
}
s->stest2 = val;
break;
case 0x4f: /* STEST3 */
if (val & 0x41) {
- BADF("SCSI FIFO test mode not implemented\n");
+ qemu_log_mask(LOG_UNIMP,
+ "lsi_scsi: SCSI FIFO test mode not implemented\n");
}
s->stest3 = val;
break;
"lsi-io", 256);
address_space_init(&s->pci_io_as, pci_address_space_io(dev), "lsi-pci-io");
+ qdev_init_gpio_out(d, &s->ext_irq, 1);
pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io_io);
pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mmio_io);
type_init(lsi53c895a_register_types)
-void lsi53c895a_create(PCIBus *bus)
+void lsi53c8xx_handle_legacy_cmdline(DeviceState *lsi_dev)
{
- LSIState *s = LSI53C895A(pci_create_simple(bus, -1, "lsi53c895a"));
+ LSIState *s = LSI53C895A(lsi_dev);
scsi_bus_legacy_handle_cmdline(&s->bus);
}
projects / qemu.git / blobdiff