2) Definitions
+TCG receives RISC-like "TCG ops" and performs some optimizations on them,
+including liveness analysis and trivial constant expression
+evaluation. TCG ops are then implemented in the host CPU back end,
+also known as the TCG "target".
+
The TCG "target" is the architecture for which we generate the
code. It is of course not the same as the "target" of QEMU which is
the emulated architecture. As TCG started as a generic C backend used
A TCG "basic block" corresponds to a list of instructions terminated
by a branch instruction.
+An operation with "undefined behavior" may result in a crash.
+
+An operation with "unspecified behavior" shall not crash. However,
+the result may be one of several possibilities so may be considered
+an "undefined result".
+
3) Intermediate representation
3.1) Introduction
* shl_i32/i64 t0, t1, t2
-t0=t1 << t2. Undefined behavior if t2 < 0 or t2 >= 32 (resp 64)
+t0=t1 << t2. Unspecified behavior if t2 < 0 or t2 >= 32 (resp 64)
* shr_i32/i64 t0, t1, t2
-t0=t1 >> t2 (unsigned). Undefined behavior if t2 < 0 or t2 >= 32 (resp 64)
+t0=t1 >> t2 (unsigned). Unspecified behavior if t2 < 0 or t2 >= 32 (resp 64)
* sar_i32/i64 t0, t1, t2
-t0=t1 >> t2 (signed). Undefined behavior if t2 < 0 or t2 >= 32 (resp 64)
+t0=t1 >> t2 (signed). Unspecified behavior if t2 < 0 or t2 >= 32 (resp 64)
* rotl_i32/i64 t0, t1, t2
-Rotation of t2 bits to the left. Undefined behavior if t2 < 0 or t2 >= 32 (resp 64)
+Rotation of t2 bits to the left.
+Unspecified behavior if t2 < 0 or t2 >= 32 (resp 64)
* rotr_i32/i64 t0, t1, t2
-Rotation of t2 bits to the right. Undefined behavior if t2 < 0 or t2 >= 32 (resp 64)
+Rotation of t2 bits to the right.
+Unspecified behavior if t2 < 0 or t2 >= 32 (resp 64)
********* Misc
LEN - the length of the bitfield
POS - the position of the first bit, counting from the LSB
-For example, pos=8, len=4 indicates a 4-bit field at bit 8.
-This operation would be equivalent to
+For example, "deposit_i32 dest, t1, t2, 8, 4" indicates a 4-bit field
+at bit 8. This operation would be equivalent to
dest = (t1 & ~0x0f00) | ((t2 << 8) & 0x0f00)
+* extract_i32/i64 dest, t1, pos, len
+* sextract_i32/i64 dest, t1, pos, len
+
+Extract a bitfield from T1, placing the result in DEST.
+The bitfield is described by POS/LEN, which are immediate values,
+as above for deposit. For extract_*, the result will be extended
+to the left with zeros; for sextract_*, the result will be extended
+to the left with copies of the bitfield sign bit at pos + len - 1.
+
+For example, "sextract_i32 dest, t1, 8, 4" indicates a 4-bit field
+at bit 8. This operation would be equivalent to
+
+ dest = (t1 << 20) >> 28
+
+(using an arithmetic right shift).
+
+* extrl_i64_i32 t0, t1
+
+For 64-bit hosts only, extract the low 32-bits of input T1 and place it
+into 32-bit output T0. Depending on the host, this may be a simple move,
+or may require additional canonicalization.
+
+* extrh_i64_i32 t0, t1
+
+For 64-bit hosts only, extract the high 32-bits of input T1 and place it
+into 32-bit output T0. Depending on the host, this may be a simple shift,
+or may require additional canonicalization.
********* Conditional moves
Similar to mulu2, except the two inputs T1 and T2 are signed.
+********* Memory Barrier support
+
+* mb <$arg>
+
+Generate a target memory barrier instruction to ensure memory ordering as being
+enforced by a corresponding guest memory barrier instruction. The ordering
+enforced by the backend may be stricter than the ordering required by the guest.
+It cannot be weaker. This opcode takes a constant argument which is required to
+generate the appropriate barrier instruction. The backend should take care to
+emit the target barrier instruction only when necessary i.e., for SMP guests and
+when MTTCG is enabled.
+
+The guest translators should generate this opcode for all guest instructions
+which have ordering side effects.
+
+Please see docs/atomics.txt for more information on memory barriers.
+
********* 64-bit guest on 32-bit host support
The following opcodes are internal to TCG. Thus they are to be implemented by
4) Backend
-tcg-target.h contains the target specific definitions. tcg-target.c
-contains the target specific code.
+tcg-target.h contains the target specific definitions. tcg-target.inc.c
+contains the target specific code; it is #included by tcg/tcg.c, rather
+than being a standalone C file.
4.1) Assumptions
few specific operations must be implemented to allow it (see add2_i32,
sub2_i32, brcond2_i32).
+On a 64 bit target, the values are transferred between 32 and 64-bit
+registers using the following ops:
+- trunc_shr_i64_i32
+- ext_i32_i64
+- extu_i32_i64
+
+They ensure that the values are correctly truncated or extended when
+moved from a 32-bit to a 64-bit register or vice-versa. Note that the
+trunc_shr_i64_i32 is an optional op. It is not necessary to implement
+it if all the following conditions are met:
+- 64-bit registers can hold 32-bit values
+- 32-bit values in a 64-bit register do not need to stay zero or
+ sign extended
+- all 32-bit TCG ops ignore the high part of 64-bit registers
+
Floating point operations are not supported in this version. A
previous incarnation of the code generator had full support of them,
but it is better to concentrate on integer operations first.
-On a 64 bit target, no assumption is made in TCG about the storage of
-the 32 bit values in 64 bit registers.
-
4.2) Constraints
GCC like constraints are used to define the constraints of every
projects / qemu.git / blobdiff