* device configuration.
*/
+#include <linux/vhost_types.h>
#include <linux/types.h>
-
#include <linux/ioctl.h>
-#include <linux/virtio_config.h>
-#include <linux/virtio_ring.h>
-
-struct vhost_vring_state {
- unsigned int index;
- unsigned int num;
-};
-
-struct vhost_vring_file {
- unsigned int index;
- int fd; /* Pass -1 to unbind from file. */
-
-};
-
-struct vhost_vring_addr {
- unsigned int index;
- /* Option flags. */
- unsigned int flags;
- /* Flag values: */
- /* Whether log address is valid. If set enables logging. */
-#define VHOST_VRING_F_LOG 0
-
- /* Start of array of descriptors (virtually contiguous) */
- __u64 desc_user_addr;
- /* Used structure address. Must be 32 bit aligned */
- __u64 used_user_addr;
- /* Available structure address. Must be 16 bit aligned */
- __u64 avail_user_addr;
- /* Logging support. */
- /* Log writes to used structure, at offset calculated from specified
- * address. Address must be 32 bit aligned. */
- __u64 log_guest_addr;
-};
-
-/* no alignment requirement */
-struct vhost_iotlb_msg {
- __u64 iova;
- __u64 size;
- __u64 uaddr;
-#define VHOST_ACCESS_RO 0x1
-#define VHOST_ACCESS_WO 0x2
-#define VHOST_ACCESS_RW 0x3
- __u8 perm;
-#define VHOST_IOTLB_MISS 1
-#define VHOST_IOTLB_UPDATE 2
-#define VHOST_IOTLB_INVALIDATE 3
-#define VHOST_IOTLB_ACCESS_FAIL 4
- __u8 type;
-};
-
-#define VHOST_IOTLB_MSG 0x1
-
-struct vhost_msg {
- int type;
- union {
- struct vhost_iotlb_msg iotlb;
- __u8 padding[64];
- };
-};
-
-struct vhost_memory_region {
- __u64 guest_phys_addr;
- __u64 memory_size; /* bytes */
- __u64 userspace_addr;
- __u64 flags_padding; /* No flags are currently specified. */
-};
-
-/* All region addresses and sizes must be 4K aligned. */
-#define VHOST_PAGE_SIZE 0x1000
-
-struct vhost_memory {
- __u32 nregions;
- __u32 padding;
- struct vhost_memory_region regions[0];
-};
+
+#define VHOST_FILE_UNBIND -1
/* ioctls */
#define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24, \
struct vhost_vring_state)
+/* Set or get vhost backend capability */
+
+/* Use message type V2 */
+#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
+/* IOTLB can accept batching hints */
+#define VHOST_BACKEND_F_IOTLB_BATCH 0x2
+
+#define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
+#define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
+
/* VHOST_NET specific defines */
/* Attach virtio net ring to a raw socket, or tap device.
* device. This can be used to stop the ring (e.g. for migration). */
#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
-/* Feature bits */
-/* Log all write descriptors. Can be changed while device is active. */
-#define VHOST_F_LOG_ALL 26
-/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
-#define VHOST_NET_F_VIRTIO_NET_HDR 27
-
-/* VHOST_SCSI specific definitions */
-
-/*
- * Used by QEMU userspace to ensure a consistent vhost-scsi ABI.
- *
- * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate +
- * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage
- * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target.
- * All the targets under vhost_wwpn can be seen and used by guset.
- */
-
-#define VHOST_SCSI_ABI_VERSION 1
-
-struct vhost_scsi_target {
- int abi_version;
- char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */
- unsigned short vhost_tpgt;
- unsigned short reserved;
-};
+/* VHOST_SCSI specific defines */
#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
#define VHOST_VSOCK_SET_GUEST_CID _IOW(VHOST_VIRTIO, 0x60, __u64)
#define VHOST_VSOCK_SET_RUNNING _IOW(VHOST_VIRTIO, 0x61, int)
+/* VHOST_VDPA specific defines */
+
+/* Get the device id. The device ids follow the same definition of
+ * the device id defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_DEVICE_ID _IOR(VHOST_VIRTIO, 0x70, __u32)
+/* Get and set the status. The status bits follow the same definition
+ * of the device status defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_STATUS _IOR(VHOST_VIRTIO, 0x71, __u8)
+#define VHOST_VDPA_SET_STATUS _IOW(VHOST_VIRTIO, 0x72, __u8)
+/* Get and set the device config. The device config follows the same
+ * definition of the device config defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_CONFIG _IOR(VHOST_VIRTIO, 0x73, \
+ struct vhost_vdpa_config)
+#define VHOST_VDPA_SET_CONFIG _IOW(VHOST_VIRTIO, 0x74, \
+ struct vhost_vdpa_config)
+/* Enable/disable the ring. */
+#define VHOST_VDPA_SET_VRING_ENABLE _IOW(VHOST_VIRTIO, 0x75, \
+ struct vhost_vring_state)
+/* Get the max ring size. */
+#define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16)
+
+/* Set event fd for config interrupt*/
+#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int)
+
+/* Get the valid iova range */
+#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \
+ struct vhost_vdpa_iova_range)
#endif
projects / qemu.git / blobdiff