do_cc $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $local_ldflags
}
-do_libtool() {
- local mode=$1
- shift
- # Run the compiler, capturing its output to the log.
- echo $libtool $mode --tag=CC $cc "$@" >> config.log
- $libtool $mode --tag=CC $cc "$@" >> config.log 2>&1 || return $?
- # Test passed. If this is an --enable-werror build, rerun
- # the test with -Werror and bail out if it fails. This
- # makes warning-generating-errors in configure test code
- # obvious to developers.
- if test "$werror" != "yes"; then
- return 0
- fi
- # Don't bother rerunning the compile if we were already using -Werror
- case "$*" in
- *-Werror*)
- return 0
- ;;
- esac
- echo $libtool $mode --tag=CC $cc -Werror "$@" >> config.log
- $libtool $mode --tag=CC $cc -Werror "$@" >> config.log 2>&1 && return $?
- error_exit "configure test passed without -Werror but failed with -Werror." \
- "This is probably a bug in the configure script. The failing command" \
- "will be at the bottom of config.log." \
- "You can run configure with --disable-werror to bypass this check."
-}
-
-libtool_prog() {
- do_libtool --mode=compile $QEMU_CFLAGS -c -fPIE -DPIE -o $TMPO $TMPC || return $?
- do_libtool --mode=link $LDFLAGS -o $TMPA $TMPL -rpath /usr/local/lib
-}
-
# symbolically link $1 to $2. Portable version of "ln -sf".
symlink() {
rm -rf "$2"
netmap="no"
pixman=""
sdl=""
-sdlabi="1.2"
+sdlabi=""
virtfs=""
vnc="yes"
sparse="no"
vnc_png=""
xen=""
xen_ctrl_version=""
+xen_pv_domain_build="no"
xen_pci_passthrough=""
linux_aio=""
cap_ng=""
pie=""
zero_malloc=""
qom_cast_debug="yes"
-trace_backends="nop"
+trace_backends="log"
trace_file="trace"
spice=""
rbd=""
libusb=""
usb_redir=""
opengl=""
+opengl_dmabuf="no"
+avx2_opt="no"
zlib="yes"
lzo=""
snappy=""
coroutine_pool=""
seccomp=""
glusterfs=""
+glusterfs_xlator_opt="no"
glusterfs_discard="no"
glusterfs_zerofill="no"
archipelago="no"
gtk_gl="no"
gnutls=""
gnutls_hash=""
+gnutls_rnd=""
nettle=""
+nettle_kdf="no"
gcrypt=""
+gcrypt_kdf="no"
vte=""
virglrenderer=""
tpm="yes"
cpp="${CPP-$cc -E}"
objcopy="${OBJCOPY-${cross_prefix}objcopy}"
ld="${LD-${cross_prefix}ld}"
-libtool="${LIBTOOL-${cross_prefix}libtool}"
nm="${NM-${cross_prefix}nm}"
strip="${STRIP-${cross_prefix}strip}"
windres="${WINDRES-${cross_prefix}windres}"
;;
--enable-xen-pci-passthrough) xen_pci_passthrough="yes"
;;
+ --disable-xen-pv-domain-build) xen_pv_domain_build="no"
+ ;;
+ --enable-xen-pv-domain-build) xen_pv_domain_build="yes"
+ ;;
--disable-brlapi) brlapi="no"
;;
--enable-brlapi) brlapi="yes"
if do_cc $QEMU_CFLAGS -Werror $flag -c -o $TMPO $TMPC &&
compile_prog "-Werror $flag" ""; then
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
- LIBTOOLFLAGS="$LIBTOOLFLAGS -Wc,$flag"
sp_on=1
break
fi
fi
fi
-# check for broken gcc and libtool in RHEL5
-if test -n "$libtool" -a "$pie" != "no" ; then
- cat > $TMPC <<EOF
-
-void *f(unsigned char *buf, int len);
-void *g(unsigned char *buf, int len);
-
-void *
-f(unsigned char *buf, int len)
-{
- return (void*)0L;
-}
-
-void *
-g(unsigned char *buf, int len)
-{
- return f(buf, len);
-}
-
-EOF
- if ! libtool_prog; then
- echo "Disabling libtool due to broken toolchain support"
- libtool=
- fi
-fi
-
##########################################
# __sync_fetch_and_and requires at least -march=i486. Many toolchains
# use i686 as default anyway, but for those that don't, an explicit
fi
##########################################
+# avx2 optimization requirement check
+
+cat > $TMPC << EOF
+static void bar(void) {}
+static void *bar_ifunc(void) {return (void*) bar;}
+static void foo(void) __attribute__((ifunc("bar_ifunc")));
+int main(void) { foo(); return 0; }
+EOF
+if compile_prog "-mavx2" "" ; then
+ if readelf --syms $TMPE |grep "IFUNC.*foo" >/dev/null 2>&1; then
+ avx2_opt="yes"
+ fi
+fi
+
+#########################################
# zlib check
if test "$zlib" != "no" ; then
i386|x86_64)
libseccomp_minver="2.1.0"
;;
+ mips)
+ libseccomp_minver="2.2.0"
+ ;;
arm|aarch64)
libseccomp_minver="2.2.3"
;;
if test "$xen" != "no" ; then
xen_libs="-lxenstore -lxenctrl -lxenguest"
+ xen_stable_libs="-lxenforeignmemory -lxengnttab -lxenevtchn"
# First we test whether Xen headers and libraries are available.
# If no, we are done and there is no Xen support.
# Xen unstable
elif
cat > $TMPC <<EOF &&
+/*
+ * If we have stable libs the we don't want the libxc compat
+ * layers, regardless of what CFLAGS we may have been given.
+ */
+#undef XC_WANT_COMPAT_EVTCHN_API
+#undef XC_WANT_COMPAT_GNTTAB_API
+#undef XC_WANT_COMPAT_MAP_FOREIGN_API
+#include <xenctrl.h>
+#include <xenstore.h>
+#include <xenevtchn.h>
+#include <xengnttab.h>
+#include <xenforeignmemory.h>
+#include <stdint.h>
+#include <xen/hvm/hvm_info_table.h>
+#if !defined(HVM_MAX_VCPUS)
+# error HVM_MAX_VCPUS not defined
+#endif
+int main(void) {
+ xc_interface *xc = NULL;
+ xenforeignmemory_handle *xfmem;
+ xenevtchn_handle *xe;
+ xengnttab_handle *xg;
+ xen_domain_handle_t handle;
+
+ xs_daemon_open();
+
+ xc = xc_interface_open(0, 0, 0);
+ xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
+ xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
+ xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
+ xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
+ xc_domain_create(xc, 0, handle, 0, NULL, NULL);
+
+ xfmem = xenforeignmemory_open(0, 0);
+ xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
+
+ xe = xenevtchn_open(0, 0);
+ xenevtchn_fd(xe);
+
+ xg = xengnttab_open(0, 0);
+ xengnttab_map_grant_ref(xg, 0, 0, 0);
+
+ return 0;
+}
+EOF
+ compile_prog "" "$xen_libs $xen_stable_libs"
+ then
+ xen_ctrl_version=471
+ xen=yes
+ elif
+ cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <stdint.h>
int main(void) {
xen_ctrl_version=420
xen=yes
- elif
- cat > $TMPC <<EOF &&
-#include <xenctrl.h>
-#include <xs.h>
-#include <stdint.h>
-#include <xen/hvm/hvm_info_table.h>
-#if !defined(HVM_MAX_VCPUS)
-# error HVM_MAX_VCPUS not defined
-#endif
-int main(void) {
- xs_daemon_open();
- xc_interface_open(0, 0, 0);
- xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
- xc_gnttab_open(NULL, 0);
- xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
- return 0;
-}
-EOF
- compile_prog "" "$xen_libs"
- then
- xen_ctrl_version=410
- xen=yes
-
- # Xen 4.0.0
- elif
- cat > $TMPC <<EOF &&
-#include <xenctrl.h>
-#include <xs.h>
-#include <stdint.h>
-#include <xen/hvm/hvm_info_table.h>
-#if !defined(HVM_MAX_VCPUS)
-# error HVM_MAX_VCPUS not defined
-#endif
-int main(void) {
- struct xen_add_to_physmap xatp = {
- .domid = 0, .space = XENMAPSPACE_gmfn, .idx = 0, .gpfn = 0,
- };
- xs_daemon_open();
- xc_interface_open();
- xc_gnttab_open();
- xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
- xc_memory_op(0, XENMEM_add_to_physmap, &xatp);
- return 0;
-}
-EOF
- compile_prog "" "$xen_libs"
- then
- xen_ctrl_version=400
- xen=yes
-
- # Xen 3.4.0
- elif
- cat > $TMPC <<EOF &&
-#include <xenctrl.h>
-#include <xs.h>
-int main(void) {
- struct xen_add_to_physmap xatp = {
- .domid = 0, .space = XENMAPSPACE_gmfn, .idx = 0, .gpfn = 0,
- };
- xs_daemon_open();
- xc_interface_open();
- xc_gnttab_open();
- xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
- xc_memory_op(0, XENMEM_add_to_physmap, &xatp);
- return 0;
-}
-EOF
- compile_prog "" "$xen_libs"
- then
- xen_ctrl_version=340
- xen=yes
-
- # Xen 3.3.0
- elif
- cat > $TMPC <<EOF &&
-#include <xenctrl.h>
-#include <xs.h>
-int main(void) {
- xs_daemon_open();
- xc_interface_open();
- xc_gnttab_open();
- xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
- return 0;
-}
-EOF
- compile_prog "" "$xen_libs"
- then
- xen_ctrl_version=330
- xen=yes
-
- # Xen version unsupported
else
if test "$xen" = "yes" ; then
- feature_not_found "xen (unsupported version)" "Install supported xen (e.g. 4.0, 3.4, 3.3)"
+ feature_not_found "xen (unsupported version)" \
+ "Install a supported xen (xen 4.2 or newer)"
fi
xen=no
fi
if test "$xen" = yes; then
+ if test $xen_ctrl_version -ge 471 ; then
+ libs_softmmu="$xen_stable_libs $libs_softmmu"
+ fi
libs_softmmu="$xen_libs $libs_softmmu"
fi
fi
if test "$xen_pci_passthrough" != "no"; then
- if test "$xen" = "yes" && test "$linux" = "yes" &&
- test "$xen_ctrl_version" -ge 340; then
+ if test "$xen" = "yes" && test "$linux" = "yes"; then
xen_pci_passthrough=yes
else
if test "$xen_pci_passthrough" = "yes"; then
- if test "$xen_ctrl_version" -lt 340; then
- error_exit "User requested feature Xen PCI Passthrough" \
- "This feature does not work with Xen 3.3"
- fi
error_exit "User requested feature Xen PCI Passthrough" \
" but this feature requires /sys from Linux"
fi
fi
fi
-##########################################
-# libtool probe
-
-if ! has $libtool; then
- libtool=
-fi
-
-# MacOSX ships with a libtool which isn't the GNU one; weed this
-# out by checking whether libtool supports the --version switch
-if test -n "$libtool"; then
- if ! "$libtool" --version >/dev/null 2>&1; then
- libtool=
- fi
+if test "$xen_pv_domain_build" = "yes" &&
+ test "$xen" != "yes"; then
+ error_exit "User requested Xen PV domain builder support" \
+ "which requires Xen support."
fi
##########################################
if $pkg_config --exists "$gtkpackage >= $gtkversion"; then
gtk_cflags=`$pkg_config --cflags $gtkpackage`
gtk_libs=`$pkg_config --libs $gtkpackage`
+ gtk_version=`$pkg_config --modversion $gtkpackage`
if $pkg_config --exists "$gtkx11package >= $gtkversion"; then
gtk_cflags="$gtk_cflags $x11_cflags"
gtk_libs="$gtk_libs $x11_libs"
gnutls_hash="no"
fi
+ # gnutls_rnd requires >= 2.11.0
+ if $pkg_config --exists "gnutls >= 2.11.0"; then
+ gnutls_rnd="yes"
+ else
+ gnutls_rnd="no"
+ fi
+
if $pkg_config --exists 'gnutls >= 3.0'; then
gnutls_gcrypt=no
gnutls_nettle=yes
else
gnutls="no"
gnutls_hash="no"
+ gnutls_rnd="no"
fi
else
gnutls_hash="no"
+ gnutls_rnd="no"
fi
if test -z "$nettle"; then
nettle="no"
fi
+
+ cat > $TMPC << EOF
+#include <gcrypt.h>
+int main(void) {
+ gcry_kdf_derive(NULL, 0, GCRY_KDF_PBKDF2,
+ GCRY_MD_SHA256,
+ NULL, 0, 0, 0, NULL);
+ return 0;
+}
+EOF
+ if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
+ gcrypt_kdf=yes
+ fi
else
if test "$gcrypt" = "yes"; then
feature_not_found "gcrypt" "Install gcrypt devel"
libs_tools="$nettle_libs $libs_tools"
QEMU_CFLAGS="$QEMU_CFLAGS $nettle_cflags"
nettle="yes"
+
+ cat > $TMPC << EOF
+#include <nettle/pbkdf2.h>
+int main(void) {
+ pbkdf2_hmac_sha256(8, NULL, 1000, 8, NULL, 8, NULL);
+ return 0;
+}
+EOF
+ if compile_prog "$nettle_cflags" "$nettle_libs" ; then
+ nettle_kdf=yes
+ fi
else
if test "$nettle" = "yes"; then
feature_not_found "nettle" "Install nettle devel"
if test "$vte" != "no"; then
if test "$gtkabi" = "3.0"; then
- vtepackage="vte-2.90"
- vteversion="0.32.0"
+ vteminversion="0.32.0"
+ if $pkg_config --exists "vte-2.91"; then
+ vtepackage="vte-2.91"
+ else
+ vtepackage="vte-2.90"
+ fi
else
vtepackage="vte"
- vteversion="0.24.0"
+ vteminversion="0.24.0"
fi
- if $pkg_config --exists "$vtepackage >= $vteversion"; then
+ if $pkg_config --exists "$vtepackage >= $vteminversion"; then
vte_cflags=`$pkg_config --cflags $vtepackage`
vte_libs=`$pkg_config --libs $vtepackage`
+ vteversion=`$pkg_config --modversion $vtepackage`
libs_softmmu="$vte_libs $libs_softmmu"
vte="yes"
elif test "$vte" = "yes"; then
if test "$gtkabi" = "3.0"; then
- feature_not_found "vte" "Install libvte-2.90 devel"
+ feature_not_found "vte" "Install libvte-2.90/2.91 devel"
else
feature_not_found "vte" "Install libvte devel"
fi
# Look for sdl configuration program (pkg-config or sdl-config). Try
# sdl-config even without cross prefix, and favour pkg-config over sdl-config.
+if test "$sdlabi" = ""; then
+ if $pkg_config --exists "sdl"; then
+ sdlabi=1.2
+ elif $pkg_config --exists "sdl2"; then
+ sdlabi=2.0
+ else
+ sdlabi=1.2
+ fi
+fi
+
if test $sdlabi = "2.0"; then
sdl_config=$sdl2_config
sdlname=sdl2
sdlconfigname=sdl2_config
-else
+elif test $sdlabi = "1.2"; then
sdlname=sdl
sdlconfigname=sdl_config
+else
+ error_exit "Unknown sdlabi $sdlabi, must be 1.2 or 2.0"
fi
if test "`basename $sdl_config`" != $sdlconfigname && ! has ${sdl_config}; then
if $pkg_config $sdlname --exists; then
sdlconfig="$pkg_config $sdlname"
- _sdlversion=`$sdlconfig --modversion 2>/dev/null | sed 's/[^0-9]//g'`
+ sdlversion=`$sdlconfig --modversion 2>/dev/null`
elif has ${sdl_config}; then
sdlconfig="$sdl_config"
- _sdlversion=`$sdlconfig --version | sed 's/[^0-9]//g'`
+ sdlversion=`$sdlconfig --version`
else
if test "$sdl" = "yes" ; then
feature_not_found "sdl" "Install SDL devel"
sdl_libs=`$sdlconfig --libs 2> /dev/null`
fi
if compile_prog "$sdl_cflags" "$sdl_libs" ; then
- if test "$_sdlversion" -lt 121 ; then
+ if test `echo $sdlversion | sed 's/[^0-9]//g'` -lt 121 ; then
sdl_too_old=yes
else
sdl=yes
# curses probe
if test "$curses" != "no" ; then
if test "$mingw32" = "yes" ; then
- curses_list="-lpdcurses"
+ curses_list="$($pkg_config --libs ncurses 2>/dev/null):-lpdcurses"
else
curses_list="$($pkg_config --libs ncurses 2>/dev/null):-lncurses:-lcurses"
fi
fi
done
+# Sanity check that the current size_t matches the
+# size that glib thinks it should be. This catches
+# problems on multi-arch where people try to build
+# 32-bit QEMU while pointing at 64-bit glib headers
+cat > $TMPC <<EOF
+#include <glib.h>
+#include <unistd.h>
+
+#define QEMU_BUILD_BUG_ON(x) \
+ typedef char qemu_build_bug_on[(x)?-1:1] __attribute__((unused));
+
+int main(void) {
+ QEMU_BUILD_BUG_ON(sizeof(size_t) != GLIB_SIZEOF_SIZE_T);
+ return 0;
+}
+EOF
+
+if ! compile_prog "$CFLAGS" "$LIBS" ; then
+ error_exit "sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T."\
+ "You probably need to set PKG_CONFIG_LIBDIR"\
+ "to point to the right pkg-config files for your"\
+ "build target"
+fi
+
# g_test_trap_subprocess added in 2.38. Used by some tests.
glib_subprocess=yes
if ! $pkg_config --atleast-version=2.38 glib-2.0; then
# opengl probe (for sdl2, gtk, milkymist-tmu2)
if test "$opengl" != "no" ; then
- opengl_pkgs="epoxy"
+ opengl_pkgs="epoxy libdrm gbm"
if $pkg_config $opengl_pkgs x11; then
opengl_cflags="$($pkg_config --cflags $opengl_pkgs) $x11_cflags"
opengl_libs="$($pkg_config --libs $opengl_pkgs) $x11_libs"
fi
fi
+if test "$opengl" = "yes"; then
+ cat > $TMPC << EOF
+#include <epoxy/egl.h>
+#ifndef EGL_MESA_image_dma_buf_export
+# error mesa/epoxy lacks support for dmabufs (mesa 10.6+)
+#endif
+int main(void) { return 0; }
+EOF
+ if compile_prog "" "" ; then
+ opengl_dmabuf=yes
+ fi
+fi
##########################################
# archipelago probe
glusterfs="yes"
glusterfs_cflags=`$pkg_config --cflags glusterfs-api`
glusterfs_libs=`$pkg_config --libs glusterfs-api`
+ if $pkg_config --atleast-version=4 glusterfs-api; then
+ glusterfs_xlator_opt="yes"
+ fi
if $pkg_config --atleast-version=5 glusterfs-api; then
glusterfs_discard="yes"
fi
fi
fi
+##########################################
+# check if struct fsxattr is available via linux/fs.h
+
+have_fsxattr=no
+cat > $TMPC << EOF
+#include <linux/fs.h>
+struct fsxattr foo;
+int main(void) {
+ return 0;
+}
+EOF
+if compile_prog "" "" ; then
+ have_fsxattr=yes
+fi
+
##########################################
# End of CC checks
# After here, no more $cc or $ld runs
tools="$tools fsdev/virtfs-proxy-helper\$(EXESUF)"
else
if test "$virtfs" = yes; then
- error_exit "VirtFS is supported only on Linux and requires libcap-devel and libattr-devel"
+ error_exit "VirtFS is supported only on Linux and requires libcap devel and libattr devel"
fi
virtfs=no
fi
fi
fi
+echo_version() {
+ if test "$1" = "yes" ; then
+ echo "($2)"
+ fi
+}
+
# prepend pixman and ftd flags after all config tests are done
QEMU_CFLAGS="$pixman_cflags $fdt_cflags $QEMU_CFLAGS"
libs_softmmu="$pixman_libs $libs_softmmu"
echo "Cocoa support $cocoa"
fi
echo "pixman $pixman"
-echo "SDL support $sdl"
-echo "GTK support $gtk"
+echo "SDL support $sdl `echo_version $sdl $sdlversion`"
+echo "GTK support $gtk `echo_version $gtk $gtk_version`"
echo "GTK GL support $gtk_gl"
+echo "VTE support $vte `echo_version $vte $vteversion`"
echo "GNUTLS support $gnutls"
echo "GNUTLS hash $gnutls_hash"
+echo "GNUTLS rnd $gnutls_rnd"
echo "libgcrypt $gcrypt"
-if test "$nettle" = "yes"; then
- echo "nettle $nettle ($nettle_version)"
-else
- echo "nettle $nettle"
-fi
+echo "libgcrypt kdf $gcrypt_kdf"
+echo "nettle $nettle `echo_version $nettle $nettle_version`"
+echo "nettle kdf $nettle_kdf"
echo "libtasn1 $tasn1"
-echo "VTE support $vte"
echo "curses support $curses"
echo "virgl support $virglrenderer"
echo "curl support $curl"
echo "xen support $xen"
if test "$xen" = "yes" ; then
echo "xen ctrl version $xen_ctrl_version"
+ echo "pv dom build $xen_pv_domain_build"
fi
echo "brlapi support $brlapi"
echo "bluez support $bluez"
echo "vhost-net support $vhost_net"
echo "vhost-scsi support $vhost_scsi"
echo "Trace backends $trace_backends"
-if test "$trace_backend" = "simple"; then
+if have_backend "simple"; then
echo "Trace output file $trace_file-<pid>"
fi
-if test "$spice" = "yes"; then
-echo "spice support $spice ($spice_protocol_version/$spice_server_version)"
-else
-echo "spice support $spice"
-fi
+echo "spice support $spice `echo_version $spice $spice_protocol_version/$spice_server_version`"
echo "rbd support $rbd"
echo "xfsctl support $xfs"
echo "smartcard support $smartcard"
echo "libusb $libusb"
echo "usb net redir $usb_redir"
echo "OpenGL support $opengl"
+echo "OpenGL dmabufs $opengl_dmabuf"
echo "libiscsi support $libiscsi"
echo "libnfs support $libnfs"
echo "build guest agent $guest_agent"
echo "NUMA host support $numa"
echo "tcmalloc support $tcmalloc"
echo "jemalloc support $jemalloc"
+echo "avx2 optimization $avx2_opt"
if test "$sdl_too_old" = "yes"; then
echo "-> Your SDL version is too old - please upgrade to have SDL support"
echo "CONFIG_GTK=y" >> $config_host_mak
echo "CONFIG_GTKABI=$gtkabi" >> $config_host_mak
echo "GTK_CFLAGS=$gtk_cflags" >> $config_host_mak
+ echo "GTK_LIBS=$gtk_libs" >> $config_host_mak
if test "$gtk_gl" = "yes" ; then
echo "CONFIG_GTK_GL=y" >> $config_host_mak
fi
if test "$gnutls_hash" = "yes" ; then
echo "CONFIG_GNUTLS_HASH=y" >> $config_host_mak
fi
+if test "$gnutls_rnd" = "yes" ; then
+ echo "CONFIG_GNUTLS_RND=y" >> $config_host_mak
+fi
if test "$gcrypt" = "yes" ; then
echo "CONFIG_GCRYPT=y" >> $config_host_mak
+ if test "$gcrypt_kdf" = "yes" ; then
+ echo "CONFIG_GCRYPT_KDF=y" >> $config_host_mak
+ fi
fi
if test "$nettle" = "yes" ; then
echo "CONFIG_NETTLE=y" >> $config_host_mak
echo "CONFIG_NETTLE_VERSION_MAJOR=${nettle_version%%.*}" >> $config_host_mak
+ if test "$nettle_kdf" = "yes" ; then
+ echo "CONFIG_NETTLE_KDF=y" >> $config_host_mak
+ fi
fi
if test "$tasn1" = "yes" ; then
echo "CONFIG_TASN1=y" >> $config_host_mak
if test "$have_ifaddrs_h" = "yes" ; then
echo "HAVE_IFADDRS_H=y" >> $config_host_mak
fi
+
+# Work around a system header bug with some kernel/XFS header
+# versions where they both try to define 'struct fsxattr':
+# xfs headers will not try to redefine structs from linux headers
+# if this macro is set.
+if test "$have_fsxattr" = "yes" ; then
+ echo "HAVE_FSXATTR=y" >> $config_host_mak
+fi
if test "$vte" = "yes" ; then
echo "CONFIG_VTE=y" >> $config_host_mak
echo "VTE_CFLAGS=$vte_cflags" >> $config_host_mak
if test "$xen" = "yes" ; then
echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
+ if test "$xen_pv_domain_build" = "yes" ; then
+ echo "CONFIG_XEN_PV_DOMAIN_BUILD=y" >> $config_host_mak
+ fi
fi
if test "$linux_aio" = "yes" ; then
echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
echo "CONFIG_OPENGL=y" >> $config_host_mak
echo "OPENGL_CFLAGS=$opengl_cflags" >> $config_host_mak
echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
+ if test "$opengl_dmabuf" = "yes" ; then
+ echo "CONFIG_OPENGL_DMABUF=y" >> $config_host_mak
+ fi
+fi
+
+if test "$avx2_opt" = "yes" ; then
+ echo "CONFIG_AVX2_OPT=y" >> $config_host_mak
fi
if test "$lzo" = "yes" ; then
echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak
fi
+if test "$glusterfs_xlator_opt" = "yes" ; then
+ echo "CONFIG_GLUSTERFS_XLATOR_OPT=y" >> $config_host_mak
+fi
+
if test "$glusterfs_discard" = "yes" ; then
echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak
fi
# Set the appropriate trace file.
trace_file="\"$trace_file-\" FMT_pid"
fi
-if have_backend "stderr"; then
- echo "CONFIG_TRACE_STDERR=y" >> $config_host_mak
+if have_backend "log"; then
+ echo "CONFIG_TRACE_LOG=y" >> $config_host_mak
fi
if have_backend "ust"; then
echo "CONFIG_TRACE_UST=y" >> $config_host_mak
echo "INSTALL=$install" >> $config_host_mak
echo "INSTALL_DIR=$install -d -m 0755" >> $config_host_mak
echo "INSTALL_DATA=$install -c -m 0644" >> $config_host_mak
-if test -n "$libtool"; then
- echo "INSTALL_PROG=\$(LIBTOOL) --mode=install $install -c -m 0755" >> $config_host_mak
- echo "INSTALL_LIB=\$(LIBTOOL) --mode=install $install -c -m 0644" >> $config_host_mak
-else
- echo "INSTALL_PROG=$install -c -m 0755" >> $config_host_mak
- echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak
-fi
+echo "INSTALL_PROG=$install -c -m 0755" >> $config_host_mak
+echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak
echo "PYTHON=$python" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
if $iasl -h > /dev/null 2>&1; then
echo "LD=$ld" >> $config_host_mak
echo "NM=$nm" >> $config_host_mak
echo "WINDRES=$windres" >> $config_host_mak
-echo "LIBTOOL=$libtool" >> $config_host_mak
echo "CFLAGS=$CFLAGS" >> $config_host_mak
echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
fi
echo "LDFLAGS=$LDFLAGS" >> $config_host_mak
echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak
-echo "LIBTOOLFLAGS=$LIBTOOLFLAGS" >> $config_host_mak
echo "LIBS+=$LIBS" >> $config_host_mak
echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
echo "EXESUF=$EXESUF" >> $config_host_mak
ppc64)
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
- gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
+ gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
;;
ppc64le)
TARGET_ARCH=ppc64
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
- gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
+ gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
;;
ppc64abi32)
TARGET_ARCH=ppc64
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
echo "TARGET_ABI32=y" >> $config_target_mak
- gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
+ gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
;;
sh4|sh4eb)
TARGET_ARCH=sh4
EOD
printf "exec" >>config.status
printf " '%s'" "$0" "$@" >>config.status
-echo >>config.status
+echo ' "$@"' >>config.status
chmod +x config.status
rm -r "$TMPDIR1"
projects / qemu.git / blobdiff