# Always point to the root of the build tree (needs GNU make).
BUILD_DIR=$(CURDIR)
+# Before including a proper config-host.mak, assume we are in the source tree
+SRC_PATH=.
+
+UNCHECKED_GOALS := %clean TAGS cscope ctags docker docker-%
+
# All following code might depend on configuration variables
ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
-include config-all-devices.mak
-include config-all-disas.mak
-include $(SRC_PATH)/rules.mak
-config-host.mak: $(SRC_PATH)/configure
+config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios
@echo $@ is out-of-date, running configure
@# TODO: The next lines include code which supports a smooth
@# transition from old configurations without config.status.
fi
else
config-host.mak:
-ifneq ($(filter-out %clean,$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
+ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
@echo "Please call configure before running make!"
@exit 1
endif
endif
-GENERATED_HEADERS = config-host.h qemu-options.def
+include $(SRC_PATH)/rules.mak
+
+GENERATED_HEADERS = qemu-version.h config-host.h qemu-options.def
GENERATED_HEADERS += qmp-commands.h qapi-types.h qapi-visit.h qapi-event.h
GENERATED_SOURCES += qmp-marshal.c qapi-types.c qapi-visit.c qapi-event.c
-
-GENERATED_HEADERS += trace/generated-events.h
-GENERATED_SOURCES += trace/generated-events.c
+GENERATED_HEADERS += qmp-introspect.h
+GENERATED_SOURCES += qmp-introspect.c
GENERATED_HEADERS += trace/generated-tracers.h
ifeq ($(findstring dtrace,$(TRACE_BACKENDS)),dtrace)
GENERATED_SOURCES += trace/generated-ust.c
endif
+GENERATED_HEADERS += module_block.h
+
# Don't try to regenerate Makefile or configure
# We don't generate any of them
Makefile: ;
configure: ;
.PHONY: all clean cscope distclean dvi html info install install-doc \
- pdf recurse-all speed test dist
+ pdf recurse-all speed test dist msi FORCE
$(call set-vpath, $(SRC_PATH))
HELPERS-$(CONFIG_LINUX) = qemu-bridge-helper$(EXESUF)
ifdef BUILD_DOCS
-DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 qmp-commands.txt
-ifdef CONFIG_LINUX
-DOCS+=kvm_stat.1
-endif
+DOCS=qemu-doc.html qemu.1 qemu-img.1 qemu-nbd.8 qemu-ga.8
ifdef CONFIG_VIRTFS
DOCS+=fsdev/virtfs-proxy-helper.1
endif
ifeq ($(SUBDIR_DEVICES_MAK),)
config-all-devices.mak:
- $(call quiet-command,echo '# no devices' > $@," GEN $@")
+ $(call quiet-command,echo '# no devices' > $@,"GEN","$@")
else
config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
$(call quiet-command, sed -n \
's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \
$(SUBDIR_DEVICES_MAK) | sort -u > $@, \
- " GEN $@")
+ "GEN","$@")
endif
-include $(SUBDIR_DEVICES_MAK_DEP)
-%/config-devices.mak: default-configs/%.mak
+%/config-devices.mak: default-configs/%.mak $(SRC_PATH)/scripts/make_device_config.sh
$(call quiet-command, \
$(call quiet-command, if test -f $@; then \
else \
- fi, " GEN $@");
+ fi,"GEN","$@");
defconfig:
rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
stub-obj-y \
util-obj-y \
qga-obj-y \
+ ivshmem-client-obj-y \
+ ivshmem-server-obj-y \
qga-vss-dll-obj-y \
block-obj-y \
block-obj-m \
+ crypto-obj-y \
+ crypto-aes-obj-y \
+ qom-obj-y \
+ io-obj-y \
common-obj-y \
common-obj-m)
ifneq ($(wildcard config-host.mak),)
-include $(SRC_PATH)/tests/Makefile
-endif
-ifeq ($(CONFIG_SMARTCARD_NSS),y)
-include $(SRC_PATH)/libcacard/Makefile
+include $(SRC_PATH)/tests/Makefile.include
endif
all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all modules
+qemu-version.h: FORCE
+ $(call quiet-command, \
+ (cd $(SRC_PATH); \
+ printf '#define QEMU_PKGVERSION '; \
+ if test -n "$(PKGVERSION)"; then \
+ printf '"$(PKGVERSION)"\n'; \
+ else \
+ if test -d .git; then \
+ printf '" ('; \
+ git describe --match 'v*' 2>/dev/null | tr -d '\n'; \
+ if ! git diff-index --quiet HEAD &>/dev/null; then \
+ printf -- '-dirty'; \
+ fi; \
+ printf ')"\n'; \
+ else \
+ printf '""\n'; \
+ fi; \
+
config-host.h: config-host.h-timestamp
config-host.h-timestamp: config-host.mak
-qemu-options.def: $(SRC_PATH)/qemu-options.hx
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@")
+qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
+ $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))
$(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
+$(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y)
+$(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
$(SOFTMMU_SUBDIR_RULES): config-all-devices.mak
subdir-%:
dtc/%:
mkdir -p $@
-$(SUBDIR_RULES): libqemuutil.a libqemustub.a $(common-obj-y)
+$(SUBDIR_RULES): libqemuutil.a libqemustub.a $(common-obj-y) $(qom-obj-y) $(crypto-aes-obj-$(CONFIG_USER_ONLY))
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
+# Only keep -O and -g cflags
romsubdir-%:
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/" CFLAGS="$(filter -O% -g%,$(CFLAGS))",)
ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
$(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc config-host.h | $(BUILD_DIR)/version.lo
- $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<," RC version.o")
+ $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"RC","version.o")
$(BUILD_DIR)/version.lo: $(SRC_PATH)/version.rc config-host.h
- $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<," RC version.lo")
+ $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"RC","version.lo")
Makefile: $(version-obj-y) $(version-lobj-y)
libqemustub.a: $(stub-obj-y)
libqemuutil.a: $(util-obj-y)
-block-modules = $(foreach o,$(block-obj-m),"$(basename $(subst /,-,$o))",) NULL
-util/module.o-cflags = -D'CONFIG_BLOCK_MODULES=$(block-modules)'
-
######################################################################
qemu-img.o: qemu-img-cmds.h
-qemu-img$(EXESUF): qemu-img.o $(block-obj-y) libqemuutil.a libqemustub.a
-qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) libqemuutil.a libqemustub.a
-qemu-io$(EXESUF): qemu-io.o $(block-obj-y) libqemuutil.a libqemustub.a
+qemu-img$(EXESUF): qemu-img.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) libqemuutil.a libqemustub.a
+qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) libqemuutil.a libqemustub.a
+qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) libqemuutil.a libqemustub.a
-qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o
+qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o libqemuutil.a libqemustub.a
-fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/virtio-9p-marshal.o libqemuutil.a libqemustub.a
+fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/9p-marshal.o fsdev/9p-iov-marshal.o libqemuutil.a libqemustub.a
fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap
-qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@")
+qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
+ $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
qemu-ga$(EXESUF): LIBS = $(LIBS_QGA)
qemu-ga$(EXESUF): QEMU_CFLAGS += -I qga/qapi-generated
$(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py \
$(gen-out-type) -o qga/qapi-generated -p "qga-" $<, \
- " GEN $@")
+ "GEN","$@")
qga/qapi-generated/qga-qapi-visit.c qga/qapi-generated/qga-qapi-visit.h :\
$(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-visit.py $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py \
$(gen-out-type) -o qga/qapi-generated -p "qga-" $<, \
- " GEN $@")
+ "GEN","$@")
qga/qapi-generated/qga-qmp-commands.h qga/qapi-generated/qga-qmp-marshal.c :\
$(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py \
$(gen-out-type) -o qga/qapi-generated -p "qga-" $<, \
- " GEN $@")
+ "GEN","$@")
qapi-modules = $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/qapi/common.json \
$(SRC_PATH)/qapi/block.json $(SRC_PATH)/qapi/block-core.json \
- $(SRC_PATH)/qapi/event.json
+ $(SRC_PATH)/qapi/event.json $(SRC_PATH)/qapi/introspect.json \
+ $(SRC_PATH)/qapi/crypto.json $(SRC_PATH)/qapi/rocker.json \
+ $(SRC_PATH)/qapi/trace.json
qapi-types.c qapi-types.h :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py \
$(gen-out-type) -o "." -b $<, \
- " GEN $@")
+ "GEN","$@")
qapi-visit.c qapi-visit.h :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-visit.py $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py \
$(gen-out-type) -o "." -b $<, \
- " GEN $@")
+ "GEN","$@")
qapi-event.c qapi-event.h :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-event.py $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-event.py \
$(gen-out-type) -o "." $<, \
- " GEN $@")
+ "GEN","$@")
qmp-commands.h qmp-marshal.c :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py \
- $(gen-out-type) -o "." -m $<, \
- " GEN $@")
+ $(gen-out-type) -o "." $<, \
+ "GEN","$@")
+qmp-introspect.h qmp-introspect.c :\
+$(qapi-modules) $(SRC_PATH)/scripts/qapi-introspect.py $(qapi-py)
+ $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-introspect.py \
+ $(gen-out-type) -o "." $<, \
+ "GEN","$@")
QGALIB_GEN=$(addprefix qga/qapi-generated/, qga-qapi-types.h qga-qapi-visit.h qga-qmp-commands.h)
$(qga-obj-y) qemu-ga.o: $(QGALIB_GEN)
qemu-ga$(EXESUF): $(qga-obj-y) libqemuutil.a libqemustub.a
$(call LINK, $^)
+ifdef QEMU_GA_MSI_ENABLED
+QEMU_GA_MSI=qemu-ga-$(ARCH).msi
+
+msi: $(QEMU_GA_MSI)
+
+$(QEMU_GA_MSI): qemu-ga.exe $(QGA_VSS_PROVIDER)
+
+$(QEMU_GA_MSI): config-host.mak
+
+$(QEMU_GA_MSI): $(SRC_PATH)/qga/installer/qemu-ga.wxs
+ $(call quiet-command,QEMU_GA_VERSION="$(QEMU_GA_VERSION)" QEMU_GA_MANUFACTURER="$(QEMU_GA_MANUFACTURER)" QEMU_GA_DISTRO="$(QEMU_GA_DISTRO)" BUILD_DIR="$(BUILD_DIR)" \
+ wixl -o $@ $(QEMU_GA_MSI_ARCH) $(QEMU_GA_MSI_WITH_VSS) $(QEMU_GA_MSI_MINGW_DLL_PATH) $<,"WIXL","$@")
+else
+msi:
+ @echo "MSI build not configured or dependency resolution failed (reconfigure with --enable-guest-agent-msi option)"
+endif
+
+ifneq ($(EXESUF),)
+.PHONY: qemu-ga
+qemu-ga: qemu-ga$(EXESUF) $(QGA_VSS_PROVIDER) $(QEMU_GA_MSI)
+endif
+
+ivshmem-client$(EXESUF): $(ivshmem-client-obj-y) libqemuutil.a libqemustub.a
+ $(call LINK, $^)
+ivshmem-server$(EXESUF): $(ivshmem-server-obj-y) libqemuutil.a libqemustub.a
+ $(call LINK, $^)
+
+module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
+ $(call quiet-command,$(PYTHON) $< $@ \
+ $(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \
+ "GEN","$@")
+
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f qemu-options.def
+ rm -f *.msi
find . \( -name '*.l[oa]' -o -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f -exec rm {} +
rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) qemu-ga TAGS cscope.* *.pod *~ */*~
rm -f fsdev/*.pod
if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
rm -f $$d/qemu-options.def; \
done
+ rm -f $(SUBDIR_DEVICES_MAK) config-all-devices.mak
VERSION ?= $(shell cat VERSION)
$(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"
distclean: clean
- rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi
+ rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi qemu-monitor-info.texi
rm -f config-all-devices.mak config-all-disas.mak config.status
rm -f po/*.mo tests/qemu-iotests/common.env
rm -f roms/seabios/config.mak roms/vgabios/config.mak
rm -f qemu-doc.vr
rm -f config.log
rm -f linux-headers/asm
- rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr
for d in $(TARGET_DIRS); do \
rm -rf $$d || exit 1 ; \
done
ifdef INSTALL_BLOBS
BLOBS=bios.bin bios-256k.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
-vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin \
-acpi-dsdt.aml q35-acpi-dsdt.aml \
+vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin vgabios-virtio.bin \
+acpi-dsdt.aml \
ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
+efi-e1000e.rom efi-vmxnet3.rom \
qemu-icon.bmp qemu_logo_no_text.svg \
bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
-multiboot.bin linuxboot.bin kvmvapic.bin \
-s390-zipl.rom \
+multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin \
s390-ccw.img \
spapr-rtas.bin slof.bin \
palcode-clipper \
install-doc: $(DOCS)
$(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)"
- $(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(qemu_docdir)"
- $(INSTALL_DATA) qmp-commands.txt "$(DESTDIR)$(qemu_docdir)"
+ $(INSTALL_DATA) qemu-doc.html "$(DESTDIR)$(qemu_docdir)"
+ $(INSTALL_DATA) $(SRC_PATH)/docs/qmp-commands.txt "$(DESTDIR)$(qemu_docdir)"
ifdef CONFIG_POSIX
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DATA) qemu.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
+ifneq (,$(findstring qemu-ga,$(TOOLS)))
+ $(INSTALL_DATA) qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
+endif
endif
ifdef CONFIG_VIRTFS
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
endif
endif
-install-confdir:
- $(INSTALL_DIR) "$(DESTDIR)$(qemu_confdir)"
-install-sysconfig: install-datadir install-confdir
- $(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf "$(DESTDIR)$(qemu_confdir)"
-
-install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig \
+install: all $(if $(BUILD_DOCS),install-doc) \
install-datadir install-localstatedir
ifneq ($(TOOLS),)
- $(call install-prog,$(TOOLS),$(DESTDIR)$(bindir))
+ $(call install-prog,$(subst qemu-ga,qemu-ga$(EXESUF),$(TOOLS)),$(DESTDIR)$(bindir))
endif
ifneq ($(CONFIG_MODULES),)
$(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
set -e; for x in $(KEYMAPS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \
done
- $(INSTALL_DATA) $(SRC_PATH)/trace-events "$(DESTDIR)$(qemu_datadir)/trace-events"
+ $(INSTALL_DATA) $(BUILD_DIR)/trace-events-all "$(DESTDIR)$(qemu_datadir)/trace-events-all"
for d in $(TARGET_DIRS); do \
$(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \
done
test speed: all
$(MAKE) -C tests/tcg $@
+.PHONY: ctags
+ctags:
+ rm -f tags
+ find "$(SRC_PATH)" -name '*.[hc]' -exec ctags --append {} +
+
.PHONY: TAGS
TAGS:
- rm -f $@
+ rm -f TAGS
find "$(SRC_PATH)" -name '*.[hc]' -exec etags --append {} +
cscope:
- rm -f ./cscope.*
- find "$(SRC_PATH)" -name "*.[chsS]" -print | sed 's,^\./,,' > ./cscope.files
- cscope -b
+ rm -f "$(SRC_PATH)"/cscope.*
+ find "$(SRC_PATH)/" -name "*.[chsS]" -print | sed 's,^\./,,' > "$(SRC_PATH)/cscope.files"
+ cscope -b -i"$(SRC_PATH)/cscope.files"
# opengl shader programs
ui/shader/%-vert.h: $(SRC_PATH)/ui/shader/%.vert $(SRC_PATH)/scripts/shaderinclude.pl
@mkdir -p $(dir $@)
$(call quiet-command,\
perl $(SRC_PATH)/scripts/shaderinclude.pl $< > $@,\
- " VERT $@")
+ "VERT","$@")
ui/shader/%-frag.h: $(SRC_PATH)/ui/shader/%.frag $(SRC_PATH)/scripts/shaderinclude.pl
@mkdir -p $(dir $@)
$(call quiet-command,\
perl $(SRC_PATH)/scripts/shaderinclude.pl $< > $@,\
- " FRAG $@")
+ "FRAG","$@")
ui/console-gl.o: $(SRC_PATH)/ui/console-gl.c \
ui/shader/texture-blit-vert.h ui/shader/texture-blit-frag.h
MAKEINFOFLAGS=--no-headers --no-split --number-sections
TEXIFLAG=$(if $(V),,--quiet)
%.dvi: %.texi
- $(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<," GEN $@")
+ $(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<,"GEN","$@")
%.html: %.texi
$(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \
- " GEN $@")
+ "GEN","$@")
%.info: %.texi
- $(call quiet-command,$(MAKEINFO) $< -o $@," GEN $@")
+ $(call quiet-command,$(MAKEINFO) $< -o $@,"GEN","$@")
%.pdf: %.texi
- $(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<," GEN $@")
+ $(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<,"GEN","$@")
-qemu-options.texi: $(SRC_PATH)/qemu-options.hx
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
+qemu-options.texi: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
+ $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
-qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
+qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
+ $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
-qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@," GEN $@")
+qemu-monitor-info.texi: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
+ $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
-qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
+qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
+ $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
-qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
+qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi qemu-monitor-info.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu.pod && \
$(POD2MAN) --section=1 --center=" " --release=" " qemu.pod > $@, \
- " GEN $@")
+ "GEN","$@")
+qemu.1: qemu-option-trace.texi
-qemu-img.1: qemu-img.texi qemu-img-cmds.texi
+qemu-img.1: qemu-img.texi qemu-option-trace.texi qemu-img-cmds.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-img.pod && \
$(POD2MAN) --section=1 --center=" " --release=" " qemu-img.pod > $@, \
- " GEN $@")
+ "GEN","$@")
fsdev/virtfs-proxy-helper.1: fsdev/virtfs-proxy-helper.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< fsdev/virtfs-proxy-helper.pod && \
$(POD2MAN) --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > $@, \
- " GEN $@")
+ "GEN","$@")
-qemu-nbd.8: qemu-nbd.texi
+qemu-nbd.8: qemu-nbd.texi qemu-option-trace.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-nbd.pod && \
$(POD2MAN) --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
- " GEN $@")
+ "GEN","$@")
-kvm_stat.1: scripts/kvm/kvm_stat.texi
+qemu-ga.8: qemu-ga.texi
$(call quiet-command, \
- perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< kvm_stat.pod && \
- $(POD2MAN) --section=1 --center=" " --release=" " kvm_stat.pod > $@, \
- " GEN $@")
+ perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-ga.pod && \
+ $(POD2MAN) --section=8 --center=" " --release=" " qemu-ga.pod > $@, \
+ "GEN","$@")
-dvi: qemu-doc.dvi qemu-tech.dvi
-html: qemu-doc.html qemu-tech.html
-info: qemu-doc.info qemu-tech.info
-pdf: qemu-doc.pdf qemu-tech.pdf
+dvi: qemu-doc.dvi
+html: qemu-doc.html
+info: qemu-doc.info
+pdf: qemu-doc.pdf
qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
- qemu-img.texi qemu-nbd.texi qemu-options.texi \
- qemu-monitor.texi qemu-img-cmds.texi
+ qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-option-trace.texi \
+ qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi \
+ qemu-monitor-info.texi
ifdef CONFIG_WIN32
$(if $(DLL_PATH),-DDLLDIR="$(DLL_PATH)") \
-DSRCDIR="$(SRC_PATH)" \
-DOUTFILE="$(INSTALLER)" \
+ -DDISPLAYVERSION="$(VERSION)" \
$(SRC_PATH)/qemu.nsi
rm -r ${INSTDIR}
ifdef SIGNCODE
# Add a dependency on the generated files, so that they are always
# rebuilt before other object files
-ifneq ($(filter-out %clean,$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
+ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
Makefile: $(GENERATED_HEADERS)
endif
# Include automatically generated dependency files
# Dependencies in Makefile.objs files come from our recursive subdir rules
-include $(wildcard *.d tests/*.d)
+
+include $(SRC_PATH)/tests/docker/Makefile.include
+
+.PHONY: help
+help:
+ @echo 'Generic targets:'
+ @echo ' all - Build all'
+ @echo ' dir/file.o - Build specified target only'
+ @echo ' install - Install QEMU, documentation and tools'
+ @echo ' ctags/TAGS - Generate tags file for editors'
+ @echo ' cscope - Generate cscope index'
+ @echo ''
+ @$(if $(TARGET_DIRS), \
+ echo 'Architecture specific targets:'; \
+ $(foreach t, $(TARGET_DIRS), \
+ printf " %-30s - Build for %s\\n" $(patsubst %,subdir-%,$(t)) $(t);) \
+ echo '')
+ @echo 'Cleaning targets:'
+ @echo ' clean - Remove most generated files but keep the config'
+ @echo ' distclean - Remove all generated files'
+ @echo ' dist - Build a distributable tarball'
+ @echo ''
+ @echo 'Test targets:'
+ @echo ' check - Run all tests (check-help for details)'
+ @echo ' docker - Help about targets running tests inside Docker containers'
+ @echo ''
+ @echo 'Documentation targets:'
+ @echo ' dvi html info pdf'
+ @echo ' - Build documentation in specified format'
+ @echo ''
+ifdef CONFIG_WIN32
+ @echo 'Windows targets:'
+ @echo ' installer - Build NSIS-based installer for qemu-ga'
+ifdef QEMU_GA_MSI_ENABLED
+ @echo ' msi - Build MSI-based installer for qemu-ga'
+endif
+ @echo ''
+endif
+ @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
projects / qemu.git / blobdiff