arm: make sure that number of irqs can be represented in GICD_TYPER.

[qemu.git] / qemu-doc.texi

diff --git a/qemu-doc.texi b/qemu-doc.texi
index 9c3cb62ee3765ad0402ed7ff3a94d769d9e5714a..83b2ad523708f9b4817d547f846fd4413bfeae6a 100644 (file)
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -107,7 +107,6 @@ For system emulation, the following hardware targets are supported:
 @item MusicPal (MV88W8618 ARM processor)
 @item Gumstix "Connex" and "Verdex" motherboards (PXA255/270).
 @item Siemens SX1 smartphone (OMAP310 processor)
-@item Syborg SVP base model (ARM Cortex-A8).
 @item AXIS-Devboard88 (CRISv32 ETRAX-FS).
 @item Petalogix Spartan 3aDSP1800 MMU ref design (MicroBlaze).
 @item Avnet LX60/LX110/LX200 boards (Xtensa)
@@ -731,6 +730,57 @@ export LIBISCSI_CHAP_PASSWORD=<password>
 iscsi://<host>/<target-iqn-name>/<lun>
 @end example
 
+Various session related parameters can be set via special options, either
+in a configuration file provided via '-readconfig' or directly on the
+command line.
+
+@example
+Setting a specific initiator name to use when logging in to the target
+-iscsi initiator-name=iqn.qemu.test:my-initiator
+@end example
+
+@example
+Controlling which type of header digest to negotiate with the target
+-iscsi header-digest=CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
+@end example
+
+These can also be set via a configuration file
+@example
+[iscsi]
+  user = "CHAP username"
+  password = "CHAP password"
+  initiator-name = "iqn.qemu.test:my-initiator"
+  # header digest is one of CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
+  header-digest = "CRC32C"
+@end example
+
+
+Setting the target name allows different options for different targets
+@example
+[iscsi "iqn.target.name"]
+  user = "CHAP username"
+  password = "CHAP password"
+  initiator-name = "iqn.qemu.test:my-initiator"
+  # header digest is one of CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
+  header-digest = "CRC32C"
+@end example
+
+
+Howto use a configuration file to set iSCSI configuration options:
+@example
+cat >iscsi.conf <<EOF
+[iscsi]
+  user = "me"
+  password = "my password"
+  initiator-name = "iqn.qemu.test:my-initiator"
+  header-digest = "CRC32C"
+EOF
+
+qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \
+    -readconfig iscsi.conf
+@end example
+
+
 Howto set up a simple iSCSI target on loopback and accessing it via QEMU:
 @example
 This example shows how to set up an iSCSI target with one CDROM and one DISK
@@ -745,7 +795,8 @@ tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 2 \
     -b /IMAGES/cd.iso --device-type=cd
 tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL
 
-qemu-system-i386 -boot d -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \
+qemu-system-i386 -iscsi initiator-name=iqn.qemu.test:my-initiator \
+    -boot d -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \
     -cdrom iscsi://127.0.0.1/iqn.qemu.test/2
 @end example
 
@@ -2079,28 +2130,6 @@ Secure Digital card connected to OMAP MMC/SD host
 Three on-chip UARTs
 @end itemize
 
-The "Syborg" Symbian Virtual Platform base model includes the following
-elements:
-
-@itemize @minus
-@item
-ARM Cortex-A8 CPU
-@item
-Interrupt controller
-@item
-Timer
-@item
-Real Time Clock
-@item
-Keyboard
-@item
-Framebuffer
-@item
-Touchscreen
-@item
-UARTs
-@end itemize
-
 A Linux 2.6 test image is available on the QEMU web site. More
 information is available in the QEMU mailing-list archive.