Do not include hw/boards.h if it's not really necessary

[qemu.git] / hw / arm / omap1.c

diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c
index 807e5f70d1caffaf2810cb359624ef8355447347..180d3788f891682a1805715f1ea4aae7f86ab5ac 100644 (file)
--- a/hw/arm/omap1.c
+++ b/hw/arm/omap1.c
@@ -24,7 +24,6 @@
 #include "qemu-common.h"
 #include "cpu.h"
 #include "exec/address-spaces.h"
-#include "hw/boards.h"
 #include "hw/hw.h"
 #include "hw/irq.h"
 #include "hw/qdev-properties.h"
@@ -1774,7 +1773,6 @@ static uint64_t omap_clkdsp_read(void *opaque, hwaddr addr,
         return s->clkm.dsp_rstct2;
 
     case 0x18: /* DSP_SYSST */
-        cpu = CPU(s->cpu);
         return (s->clkm.clocking_scheme << 11) | s->clkm.cold_start |
                 (cpu->halted << 6);      /* Quite useless... */
     }
@@ -3887,21 +3885,21 @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *dram,
 
     omap_clkm_init(system_memory, 0xfffece00, 0xe1008000, s);
 
-    s->ih[0] = qdev_create(NULL, "omap-intc");
+    s->ih[0] = qdev_new("omap-intc");
     qdev_prop_set_uint32(s->ih[0], "size", 0x100);
     omap_intc_set_iclk(OMAP_INTC(s->ih[0]), omap_findclk(s, "arminth_ck"));
-    qdev_init_nofail(s->ih[0]);
     busdev = SYS_BUS_DEVICE(s->ih[0]);
+    sysbus_realize_and_unref(busdev, &error_fatal);
     sysbus_connect_irq(busdev, 0,
                        qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ));
     sysbus_connect_irq(busdev, 1,
                        qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ));
     sysbus_mmio_map(busdev, 0, 0xfffecb00);
-    s->ih[1] = qdev_create(NULL, "omap-intc");
+    s->ih[1] = qdev_new("omap-intc");
     qdev_prop_set_uint32(s->ih[1], "size", 0x800);
     omap_intc_set_iclk(OMAP_INTC(s->ih[1]), omap_findclk(s, "arminth_ck"));
-    qdev_init_nofail(s->ih[1]);
     busdev = SYS_BUS_DEVICE(s->ih[1]);
+    sysbus_realize_and_unref(busdev, &error_fatal);
     sysbus_connect_irq(busdev, 0,
                        qdev_get_gpio_in(s->ih[0], OMAP_INT_15XX_IH2_IRQ));
     /* The second interrupt controller's FIQ output is not wired up */
@@ -4010,10 +4008,10 @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *dram,
                                qdev_get_gpio_in(s->ih[1], OMAP_INT_MPUIO),
                                s->wakeup, omap_findclk(s, "clk32-kHz"));
 
-    s->gpio = qdev_create(NULL, "omap-gpio");
+    s->gpio = qdev_new("omap-gpio");
     qdev_prop_set_int32(s->gpio, "mpu_model", s->mpu_model);
-    qdev_prop_set_ptr(s->gpio, "clk", omap_findclk(s, "arm_gpio_ck"));
-    qdev_init_nofail(s->gpio);
+    omap_gpio_set_clk(OMAP1_GPIO(s->gpio), omap_findclk(s, "arm_gpio_ck"));
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(s->gpio), &error_fatal);
     sysbus_connect_irq(SYS_BUS_DEVICE(s->gpio), 0,
                        qdev_get_gpio_in(s->ih[0], OMAP_INT_GPIO_BANK1));
     sysbus_mmio_map(SYS_BUS_DEVICE(s->gpio), 0, 0xfffce000);
@@ -4028,11 +4026,11 @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *dram,
     s->pwt = omap_pwt_init(system_memory, 0xfffb6000,
                            omap_findclk(s, "armxor_ck"));
 
-    s->i2c[0] = qdev_create(NULL, "omap_i2c");
+    s->i2c[0] = qdev_new("omap_i2c");
     qdev_prop_set_uint8(s->i2c[0], "revision", 0x11);
     omap_i2c_set_fclk(OMAP_I2C(s->i2c[0]), omap_findclk(s, "mpuper_ck"));
-    qdev_init_nofail(s->i2c[0]);
     busdev = SYS_BUS_DEVICE(s->i2c[0]);
+    sysbus_realize_and_unref(busdev, &error_fatal);
     sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(s->ih[1], OMAP_INT_I2C));
     sysbus_connect_irq(busdev, 1, s->drq[OMAP_DMA_I2C_TX]);
     sysbus_connect_irq(busdev, 2, s->drq[OMAP_DMA_I2C_RX]);