include config.mak
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_ARCH)
-VPATH=$(SRC_PATH):$(TARGET_PATH)
-CFLAGS=-Wall -O2 -g
+VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw
+DEFINES=-I. -I$(TARGET_PATH) -I$(SRC_PATH)
+ifdef CONFIG_USER_ONLY
+VPATH+=:$(SRC_PATH)/linux-user
+DEFINES+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ARCH)
+endif
+CFLAGS=-Wall -O2 -g -fno-strict-aliasing
LDFLAGS=-g
LIBS=
-DEFINES=-I. -I$(TARGET_PATH) -I$(SRC_PATH)
HELPER_CFLAGS=$(CFLAGS)
-DYNGEN=../dyngen
+DYNGEN=../dyngen$(EXESUF)
# user emulator name
QEMU_USER=qemu-$(TARGET_ARCH)
# system emulator name
ifdef CONFIG_SOFTMMU
-QEMU_SYSTEM=qemu
+ifeq ($(TARGET_ARCH), i386)
+QEMU_SYSTEM=qemu$(EXESUF)
+else
+QEMU_SYSTEM=qemu-system-$(TARGET_ARCH)$(EXESUF)
+endif
else
QEMU_SYSTEM=qemu-fast
endif
ifdef CONFIG_USER_ONLY
PROGS=$(QEMU_USER)
else
-ifeq ($(ARCH),i386)
ifeq ($(TARGET_ARCH), i386)
+
+ifeq ($(ARCH), i386)
PROGS+=$(QEMU_SYSTEM)
+ifndef CONFIG_SOFTMMU
+CONFIG_STATIC=y
endif
+else
+# the system emulator using soft mmu is portable
+ifdef CONFIG_SOFTMMU
+PROGS+=$(QEMU_SYSTEM)
endif
+endif # ARCH != i386
+
+endif # TARGET_ARCH = i386
+
+ifeq ($(TARGET_ARCH), ppc)
+
+ifeq ($(ARCH), ppc)
+PROGS+=$(QEMU_SYSTEM)
+endif
+
+ifeq ($(ARCH), i386)
+ifdef CONFIG_SOFTMMU
+PROGS+=$(QEMU_SYSTEM)
+endif
+endif # ARCH = i386
+
+ifeq ($(ARCH), amd64)
+ifdef CONFIG_SOFTMMU
+PROGS+=$(QEMU_SYSTEM)
endif
+endif # ARCH = amd64
+
+endif # TARGET_ARCH = ppc
+endif # !CONFIG_USER_ONLY
ifdef CONFIG_STATIC
LDFLAGS+=-static
CFLAGS+=-fomit-frame-pointer
OP_CFLAGS=$(CFLAGS) -mpreferred-stack-boundary=2
ifeq ($(HAVE_GCC3_OPTIONS),yes)
-OP_CFLAGS+= -falign-functions=0
+OP_CFLAGS+= -falign-functions=0 -fno-gcse
else
OP_CFLAGS+= -malign-functions=0
endif
+
ifdef TARGET_GPROF
+USE_I386_LD=y
+endif
+ifdef CONFIG_STATIC
+USE_I386_LD=y
+endif
+ifdef USE_I386_LD
LDFLAGS+=-Wl,-T,$(SRC_PATH)/i386.ld
else
# WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
endif
endif
+ifeq ($(ARCH),amd64)
+OP_CFLAGS=$(CFLAGS) -falign-functions=0
+LDFLAGS+=-Wl,-T,$(SRC_PATH)/amd64.ld
+endif
+
ifeq ($(ARCH),ppc)
+CFLAGS+= -D__powerpc__
OP_CFLAGS=$(CFLAGS)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/ppc.ld
endif
OP_CFLAGS+=-fno-reorder-blocks -fno-optimize-sibling-calls
endif
+ifeq ($(CONFIG_DARWIN),yes)
+OP_CFLAGS+= -mdynamic-no-pic
+endif
+
#########################################################
-DEFINES+=-D_GNU_SOURCE
+DEFINES+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
LIBS+=-lm
+ifndef CONFIG_USER_ONLY
+LIBS+=-lz
+endif
+ifdef CONFIG_WIN32
+LIBS+=-lwinmm -lws2_32 -liphlpapi
+endif
# profiling code
ifdef TARGET_GPROF
main.o: CFLAGS+=-p
endif
-OBJS= elfload.o main.o syscall.o mmap.o signal.o path.o
+OBJS= elfload.o main.o syscall.o mmap.o signal.o path.o osdep.o thunk.o
ifeq ($(TARGET_ARCH), i386)
OBJS+= vm86.o
endif
+ifeq ($(TARGET_ARCH), arm)
+OBJS+=nwfpe/softfloat.o nwfpe/fpa11.o nwfpe/fpa11_cpdo.o \
+nwfpe/fpa11_cpdt.o nwfpe/fpa11_cprt.o nwfpe/fpopcode.o nwfpe/single_cpdo.o \
+ nwfpe/double_cpdo.o nwfpe/extended_cpdo.o
+endif
SRCS:= $(OBJS:.o=.c)
OBJS+= libqemu.a
# cpu emulator library
-LIBOBJS=thunk.o exec.o translate-all.o cpu-exec.o gdbstub.o \
+LIBOBJS=exec.o translate-all.o cpu-exec.o\
translate.o op.o
ifeq ($(TARGET_ARCH), i386)
LIBOBJS+=helper.o helper2.o
+ifeq ($(ARCH), i386)
+LIBOBJS+=translate-copy.o
+endif
+endif
+
+ifeq ($(TARGET_ARCH), ppc)
+LIBOBJS+= op_helper.o helper.o
endif
# NOTE: the disassembler code is only needed for debugging
LIBOBJS+=disas.o
ifeq ($(findstring i386, $(TARGET_ARCH) $(ARCH)),i386)
+USE_I386_DIS=y
+endif
+ifeq ($(findstring amd64, $(TARGET_ARCH) $(ARCH)),amd64)
+USE_I386_DIS=y
+endif
+ifdef USE_I386_DIS
LIBOBJS+=i386-dis.o
endif
ifeq ($(findstring alpha, $(TARGET_ARCH) $(ARCH)),alpha)
endif
# must use static linking to avoid leaving stuff in virtual address space
-VL_OBJS=vl.o block.o vga.o
+VL_OBJS=vl.o osdep.o block.o readline.o monitor.o pci.o console.o
+VL_OBJS+=block-cow.o block-qcow.o aes.o block-vmdk.o
+
+ifeq ($(TARGET_ARCH), i386)
+# Hardware support
+VL_OBJS+= ide.o ne2000.o pckbd.o vga.o sb16.o dma.o oss.o
+VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o
+VL_OBJS+= cirrus_vga.o
+endif
+ifeq ($(TARGET_ARCH), ppc)
+VL_OBJS+= ppc.o ide.o ne2000.o pckbd.o vga.o sb16.o dma.o oss.o
+VL_OBJS+= mc146818rtc.o serial.o i8259.o i8254.o fdc.o m48t59.o
+VL_OBJS+= ppc_prep.o ppc_chrp.o cuda.o adb.o openpic.o
+endif
+ifdef CONFIG_GDBSTUB
+VL_OBJS+=gdbstub.o
+endif
ifdef CONFIG_SDL
VL_OBJS+=sdl.o
-SDL_LIBS+=-L/usr/X11R6/lib -lX11 -lXext -lXv -ldl -lm
+endif
+ifdef CONFIG_SLIRP
+DEFINES+=-I$(SRC_PATH)/slirp
+SLIRP_OBJS=cksum.o if.o ip_icmp.o ip_input.o ip_output.o \
+slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o \
+tcp_subr.o tcp_timer.o udp.o bootp.o debug.o tftp.o
+VL_OBJS+=$(addprefix slirp/, $(SLIRP_OBJS))
+endif
+
+VL_LDFLAGS=
+# specific flags are needed for non soft mmu emulator
+ifdef CONFIG_STATIC
+VL_LDFLAGS+=-static
+endif
+ifndef CONFIG_SOFTMMU
+VL_LDFLAGS+=-Wl,-T,$(SRC_PATH)/i386-vl.ld
+endif
+ifndef CONFIG_DARWIN
+ifndef CONFIG_WIN32
+VL_LIBS=-lutil
+endif
endif
$(QEMU_SYSTEM): $(VL_OBJS) libqemu.a
- $(CC) -static -Wl,-T,$(SRC_PATH)/i386-vl.ld -o $@ $^ $(LIBS) $(SDL_LIBS)
+ $(CC) $(VL_LDFLAGS) -o $@ $^ $(LIBS) $(SDL_LIBS) $(VL_LIBS)
sdl.o: sdl.c
$(CC) $(CFLAGS) $(DEFINES) $(SDL_CFLAGS) -c -o $@ $<
op.o: op.c op_template.h
endif
+ifeq ($(TARGET_ARCH), ppc)
+op.o: op.c op_template.h op_mem.h
+op_helper.o: op_helper_mem.h
+endif
+
%.o: %.c
$(CC) $(CFLAGS) $(DEFINES) -c -o $@ $<
+%.o: %.S
+ $(CC) $(DEFINES) -c -o $@ $<
+
clean:
- rm -f *.o *.a *~ $(PROGS) gen-op.h opc.h op.h
+ rm -f *.o *.a *~ $(PROGS) gen-op.h opc.h op.h nwfpe/*.o slirp/*.o
install: all
- install -m 755 -s $(PROGS) $(prefix)/bin
+ifneq ($(PROGS),)
+ install -m 755 -s $(PROGS) "$(bindir)"
+endif
ifneq ($(wildcard .depend),)
include .depend
projects / qemu.git / blobdiff