error: Make error_setg() a function

[qemu.git] / tests / ide-test.c

diff --git a/tests/ide-test.c b/tests/ide-test.c
index d5cec5a1fc6a40d29ba30984c464c5ff2587a37d..4a07e3a9d0de463f4a8e22d6f679fbc65f9583b3 100644 (file)
--- a/tests/ide-test.c
+++ b/tests/ide-test.c
@@ -29,6 +29,7 @@
 #include <glib.h>
 
 #include "libqtest.h"
+#include "libqos/libqos.h"
 #include "libqos/pci-pc.h"
 #include "libqos/malloc-pc.h"
 
@@ -106,6 +107,7 @@ static QPCIBus *pcibus = NULL;
 static QGuestAllocator *guest_malloc;
 
 static char tmp_path[] = "/tmp/qtest.XXXXXX";
+static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX";
 
 static void ide_test_start(const char *cmdline_fmt, ...)
 {
@@ -117,12 +119,15 @@ static void ide_test_start(const char *cmdline_fmt, ...)
     va_end(ap);
 
     qtest_start(cmdline);
-    qtest_irq_intercept_in(global_qtest, "ioapic");
     guest_malloc = pc_alloc_init();
+
+    g_free(cmdline);
 }
 
 static void ide_test_quit(void)
 {
+    pc_alloc_uninit(guest_malloc);
+    guest_malloc = NULL;
     qtest_end();
 }
 
@@ -145,7 +150,7 @@ static QPCIDevice *get_pci_device(uint16_t *bmdma_base)
     g_assert(device_id == PCI_DEVICE_ID_INTEL_82371SB_1);
 
     /* Map bmdma BAR */
-    *bmdma_base = (uint16_t)(uintptr_t) qpci_iomap(dev, 4);
+    *bmdma_base = (uint16_t)(uintptr_t) qpci_iomap(dev, 4, NULL);
 
     qpci_device_enable(dev);
 
@@ -334,6 +339,31 @@ static void test_bmdma_short_prdt(void)
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 }
 
+static void test_bmdma_one_sector_short_prdt(void)
+{
+    uint8_t status;
+
+    /* Read 2 sectors but only give 1 sector in PRDT */
+    PrdtEntry prdt[] = {
+        {
+            .addr = 0,
+            .size = cpu_to_le32(0x200 | PRDT_EOT),
+        },
+    };
+
+    /* Normal request */
+    status = send_dma_request(CMD_READ_DMA, 0, 2,
+                              prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, 0);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+    /* Abort the request before it completes */
+    status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 2,
+                              prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, 0);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+}
+
 static void test_bmdma_long_prdt(void)
 {
     uint8_t status;
@@ -380,10 +410,10 @@ static void test_bmdma_no_busmaster(void)
 static void test_bmdma_setup(void)
 {
     ide_test_start(
-        "-vnc none "
-        "-drive file=%s,if=ide,serial=%s,cache=writeback "
+        "-drive file=%s,if=ide,serial=%s,cache=writeback,format=raw "
         "-global ide-hd.ver=%s",
         tmp_path, "testdisk", "version");
+    qtest_irq_intercept_in(global_qtest, "ioapic");
 }
 
 static void test_bmdma_teardown(void)
@@ -410,8 +440,7 @@ static void test_identify(void)
     int ret;
 
     ide_test_start(
-        "-vnc none "
-        "-drive file=%s,if=ide,serial=%s,cache=writeback "
+        "-drive file=%s,if=ide,serial=%s,cache=writeback,format=raw "
         "-global ide-hd.ver=%s",
         tmp_path, "testdisk", "version");
 
@@ -455,8 +484,7 @@ static void test_flush(void)
     uint8_t data;
 
     ide_test_start(
-        "-vnc none "
-        "-drive file=blkdebug::%s,if=ide,cache=writeback",
+        "-drive file=blkdebug::%s,if=ide,cache=writeback,format=raw",
         tmp_path);
 
     /* Delay the completion of the flush request until we explicitly do it */
@@ -492,6 +520,71 @@ static void test_flush(void)
     ide_test_quit();
 }
 
+static void test_retry_flush(const char *machine)
+{
+    uint8_t data;
+    const char *s;
+
+    prepare_blkdebug_script(debug_path, "flush_to_disk");
+
+    ide_test_start(
+        "-vnc none "
+        "-drive file=blkdebug:%s:%s,if=ide,cache=writeback,format=raw,"
+        "rerror=stop,werror=stop",
+        debug_path, tmp_path);
+
+    /* FLUSH CACHE command on device 0*/
+    outb(IDE_BASE + reg_device, 0);
+    outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE);
+
+    /* Check status while request is in flight*/
+    data = inb(IDE_BASE + reg_status);
+    assert_bit_set(data, BSY | DRDY);
+    assert_bit_clear(data, DF | ERR | DRQ);
+
+    qmp_eventwait("STOP");
+
+    /* Complete the command */
+    s = "{'execute':'cont' }";
+    qmp_discard_response(s);
+
+    /* Check registers */
+    data = inb(IDE_BASE + reg_device);
+    g_assert_cmpint(data & DEV, ==, 0);
+
+    do {
+        data = inb(IDE_BASE + reg_status);
+    } while (data & BSY);
+
+    assert_bit_set(data, DRDY);
+    assert_bit_clear(data, BSY | DF | ERR | DRQ);
+
+    ide_test_quit();
+}
+
+static void test_flush_nodev(void)
+{
+    ide_test_start("");
+
+    /* FLUSH CACHE command on device 0*/
+    outb(IDE_BASE + reg_device, 0);
+    outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE);
+
+    /* Just testing that qemu doesn't crash... */
+
+    ide_test_quit();
+}
+
+static void test_pci_retry_flush(const char *machine)
+{
+    test_retry_flush("pc");
+}
+
+static void test_isa_retry_flush(const char *machine)
+{
+    test_retry_flush("isapc");
+}
+
 int main(int argc, char **argv)
 {
     const char *arch = qtest_get_arch();
@@ -504,6 +597,11 @@ int main(int argc, char **argv)
         return 0;
     }
 
+    /* Create temporary blkdebug instructions */
+    fd = mkstemp(debug_path);
+    g_assert(fd >= 0);
+    close(fd);
+
     /* Create a temporary raw image */
     fd = mkstemp(tmp_path);
     g_assert(fd >= 0);
@@ -519,16 +617,22 @@ int main(int argc, char **argv)
     qtest_add_func("/ide/bmdma/setup", test_bmdma_setup);
     qtest_add_func("/ide/bmdma/simple_rw", test_bmdma_simple_rw);
     qtest_add_func("/ide/bmdma/short_prdt", test_bmdma_short_prdt);
+    qtest_add_func("/ide/bmdma/one_sector_short_prdt",
+                   test_bmdma_one_sector_short_prdt);
     qtest_add_func("/ide/bmdma/long_prdt", test_bmdma_long_prdt);
     qtest_add_func("/ide/bmdma/no_busmaster", test_bmdma_no_busmaster);
     qtest_add_func("/ide/bmdma/teardown", test_bmdma_teardown);
 
     qtest_add_func("/ide/flush", test_flush);
+    qtest_add_func("/ide/flush/nodev", test_flush_nodev);
+    qtest_add_func("/ide/flush/retry_pci", test_pci_retry_flush);
+    qtest_add_func("/ide/flush/retry_isa", test_isa_retry_flush);
 
     ret = g_test_run();
 
     /* Cleanup */
     unlink(tmp_path);
+    unlink(debug_path);
 
     return ret;
 }