glusterfs=""
glusterfs_discard="no"
glusterfs_zerofill="no"
+archipelago=""
virtio_blk_data_plane=""
gtk=""
gtkabi=""
vte=""
-tpm="no"
+tpm="yes"
libssh2=""
vhdx=""
quorum=""
;;
--enable-glusterfs) glusterfs="yes"
;;
+ --disable-archipelago) archipelago="no"
+ ;;
+ --enable-archipelago) archipelago="yes"
+ ;;
--disable-virtio-blk-data-plane) virtio_blk_data_plane="no"
;;
--enable-virtio-blk-data-plane) virtio_blk_data_plane="yes"
;;
--enable-vte) vte="yes"
;;
+ --disable-tpm) tpm="no"
+ ;;
--enable-tpm) tpm="yes"
;;
--disable-libssh2) libssh2="no"
--enable-coroutine-pool enable coroutine freelist (better performance)
--enable-glusterfs enable GlusterFS backend
--disable-glusterfs disable GlusterFS backend
+ --enable-archipelago enable Archipelago backend
+ --disable-archipelago disable Archipelago backend
--enable-gcov enable test coverage analysis with gcov
--gcov=GCOV use specified gcov [$gcov_tool]
+ --disable-tpm disable TPM support
--enable-tpm enable TPM support
--disable-libssh2 disable ssh block device support
--enable-libssh2 enable ssh block device support
fi
done
-if test "$stack_protector" != "no" ; then
+if test "$stack_protector" != "no"; then
gcc_flags="-fstack-protector-strong -fstack-protector-all"
+ sp_on=0
for flag in $gcc_flags; do
# We need to check both a compile and a link, since some compiler
# setups fail only on a .c->.o compile and some only at link time
compile_prog "-Werror $flag" ""; then
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
LIBTOOLFLAGS="$LIBTOOLFLAGS -Wc,$flag"
+ sp_on=1
break
fi
done
+ if test "$stack_protector" = yes; then
+ if test $sp_on = 0; then
+ error_exit "Stack protector not supported"
+ fi
+ fi
fi
# Workaround for http://gcc.gnu.org/PR55489. Happens with -fPIE/-fPIC and
echo big/little test failed
fi
+##########################################
+# L2TPV3 probe
+
+cat > $TMPC <<EOF
+#include <sys/socket.h>
+#include <linux/ip.h>
+int main(void) { return sizeof(struct mmsghdr); }
+EOF
+if compile_prog "" "" ; then
+ l2tpv3=yes
+else
+ l2tpv3=no
+fi
+
##########################################
# pkg-config probe
fi
fi
+
+##########################################
+# archipelago probe
+if test "$archipelago" != "no" ; then
+ cat > $TMPC <<EOF
+#include <stdio.h>
+#include <xseg/xseg.h>
+#include <xseg/protocol.h>
+int main(void) {
+ xseg_initialize();
+ return 0;
+}
+EOF
+ archipelago_libs=-lxseg
+ if compile_prog "" "$archipelago_libs"; then
+ archipelago="yes"
+ libs_tools="$archipelago_libs $libs_tools"
+ libs_softmmu="$archipelago_libs $libs_softmmu"
+ else
+ if test "$archipelago" = "yes" ; then
+ feature_not_found "Archipelago backend support" "Install libxseg devel"
+ fi
+ archipelago="no"
+ fi
+fi
+
+
##########################################
# glusterfs probe
if test "$glusterfs" != "no" ; then
fi
else
if test "$glusterfs" = "yes" ; then
- feature_not_found "GlusterFS backend support" "Install glusterfs-api devel"
+ feature_not_found "GlusterFS backend support" \
+ "Install glusterfs-api devel >= 3"
fi
glusterfs="no"
fi
sendfile=yes
fi
+# check for timerfd support (glibc 2.8 and newer)
+timerfd=no
+cat > $TMPC << EOF
+#include <sys/timerfd.h>
+
+int main(void)
+{
+ return(timerfd_create(CLOCK_REALTIME, 0));
+}
+EOF
+if compile_prog "" "" ; then
+ timerfd=yes
+fi
+
+# check for setns and unshare support
+setns=no
+cat > $TMPC << EOF
+#include <sched.h>
+
+int main(void)
+{
+ int ret;
+ ret = setns(0, 0);
+ ret = unshare(0);
+ return ret;
+}
+EOF
+if compile_prog "" "" ; then
+ setns=yes
+fi
+
# Check if tools are available to build documentation.
if test "$docs" != "no" ; then
if has makeinfo && has pod2man; then
# Do we need libm
cat > $TMPC << EOF
#include <math.h>
-int main(void) { return isnan(sin(0.0)); }
+int main(int argc, char **argv) { return isnan(sin((double)argc)); }
EOF
if compile_prog "" "" ; then
:
spice_server_version=$($pkg_config --modversion spice-server)
else
if test "$spice" = "yes" ; then
- feature_not_found "spice" "Install spice-server and spice-protocol devel"
+ feature_not_found "spice" \
+ "Install spice-server(>=0.12.0) and spice-protocol(>=0.12.3) devel"
fi
spice="no"
fi
smartcard_nss="yes"
else
if test "$smartcard_nss" = "yes"; then
- feature_not_found "nss"
+ feature_not_found "nss" "Install nss devel >= 3.12.8"
fi
smartcard_nss="no"
fi
libs_softmmu="$libs_softmmu $libusb_libs"
else
if test "$libusb" = "yes"; then
- feature_not_found "libusb" "Install libusb devel"
+ feature_not_found "libusb" "Install libusb devel >= 1.0.13"
fi
libusb="no"
fi
LIBS="$LIBS $libnfs_libs"
else
if test "$libnfs" = "yes" ; then
- feature_not_found "libnfs"
+ feature_not_found "libnfs" "Install libnfs devel >= 1.9.3"
fi
libnfs="no"
fi
echo "coroutine backend $coroutine"
echo "coroutine pool $coroutine_pool"
echo "GlusterFS support $glusterfs"
+echo "Archipelago support $archipelago"
echo "virtio-blk-data-plane $virtio_blk_data_plane"
echo "gcov $gcov_tool"
echo "gcov enabled $gcov"
if test "$netmap" = "yes" ; then
echo "CONFIG_NETMAP=y" >> $config_host_mak
fi
+if test "$l2tpv3" = "yes" ; then
+ echo "CONFIG_L2TPV3=y" >> $config_host_mak
+fi
if test "$cap_ng" = "yes" ; then
echo "CONFIG_LIBCAP=y" >> $config_host_mak
fi
if test "$sendfile" = "yes" ; then
echo "CONFIG_SENDFILE=y" >> $config_host_mak
fi
+if test "$timerfd" = "yes" ; then
+ echo "CONFIG_TIMERFD=y" >> $config_host_mak
+fi
+if test "$setns" = "yes" ; then
+ echo "CONFIG_SETNS=y" >> $config_host_mak
+fi
if test "$inotify" = "yes" ; then
echo "CONFIG_INOTIFY=y" >> $config_host_mak
fi
echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak
fi
+if test "$archipelago" = "yes" ; then
+ echo "CONFIG_ARCHIPELAGO=m" >> $config_host_mak
+ echo "ARCHIPELAGO_LIBS=$archipelago_libs" >> $config_host_mak
+fi
+
if test "$libssh2" = "yes" ; then
echo "CONFIG_LIBSSH2=m" >> $config_host_mak
echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/s390 $QEMU_INCLUDES"
elif test "$ARCH" = "x86_64" -o "$ARCH" = "x32" ; then
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/i386 $QEMU_INCLUDES"
+elif test "$ARCH" = "ppc64" ; then
+ QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/ppc $QEMU_INCLUDES"
else
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/\$(ARCH) $QEMU_INCLUDES"
fi
aarch64)
linux_arch=arm64
;;
+ mips64)
+ linux_arch=mips
+ ;;
*)
# For most CPUs the kernel architecture name and QEMU CPU name match.
linux_arch="$cpu"
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
;;
+ tricore)
+ ;;
moxie)
;;
or32)
echo "TARGET_ABI32=y" >> $config_target_mak
;;
s390x)
+ gdb_xml_files="s390x-core64.xml s390-acr.xml s390-fpr.xml"
;;
unicore32)
;;
*)
esac
case "$target_name" in
- aarch64|arm|i386|x86_64|ppcemb|ppc|ppc64|s390x)
+ aarch64|arm|i386|x86_64|ppcemb|ppc|ppc64|s390x|mipsel|mips)
# Make sure the target and host cpus are compatible
if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
\( "$target_name" = "$cpu" -o \
\( "$target_name" = "ppc64" -a "$cpu" = "ppc" \) -o \
\( "$target_name" = "ppc" -a "$cpu" = "ppc64" \) -o \
\( "$target_name" = "ppcemb" -a "$cpu" = "ppc64" \) -o \
+ \( "$target_name" = "mipsel" -a "$cpu" = "mips" \) -o \
\( "$target_name" = "x86_64" -a "$cpu" = "i386" \) -o \
\( "$target_name" = "i386" -a "$cpu" = "x86_64" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
echo "LD=$ld" >> $config_mak
done
-if test "$docs" = "yes" ; then
- mkdir -p QMP
+# set up qemu-iotests in this build directory
+iotests_common_env="tests/qemu-iotests/common.env"
+iotests_check="tests/qemu-iotests/check"
+
+echo "# Automatically generated by configure - do not modify" > "$iotests_common_env"
+echo >> "$iotests_common_env"
+echo "export PYTHON='$python'" >> "$iotests_common_env"
+
+if [ ! -e "$iotests_check" ]; then
+ symlink "$source_path/$iotests_check" "$iotests_check"
fi
# Save the configure command line for later reuse.
projects / qemu.git / blobdiff