* disk_images_nbd:: NBD access
* disk_images_sheepdog:: Sheepdog disk images
* disk_images_iscsi:: iSCSI LUNs
+* disk_images_gluster:: GlusterFS disk images
@end menu
@node disk_images_quickstart
protocol.
@example
-qemu-system-i386 linux.img -hdb nbd:my_nbd_server.mydomain.org:1024
+qemu-system-i386 linux.img -hdb nbd://my_nbd_server.mydomain.org:1024/
@end example
If the NBD server is located on the same host, you can use an unix socket instead
of an inet socket:
@example
-qemu-system-i386 linux.img -hdb nbd:unix:/tmp/my_socket
+qemu-system-i386 linux.img -hdb nbd+unix://?socket=/tmp/my_socket
@end example
In this case, the block device must be exported using qemu-nbd:
qemu-nbd --socket=/tmp/my_socket --share=2 my_disk.qcow2
@end example
+@noindent
and then you can use it with two guests:
@example
-qemu-system-i386 linux1.img -hdb nbd:unix:/tmp/my_socket
-qemu-system-i386 linux2.img -hdb nbd:unix:/tmp/my_socket
+qemu-system-i386 linux1.img -hdb nbd+unix://?socket=/tmp/my_socket
+qemu-system-i386 linux2.img -hdb nbd+unix://?socket=/tmp/my_socket
+@end example
+
+If the nbd-server uses named exports (supported since NBD 2.9.18, or with QEMU's
+own embedded NBD server), you must specify an export name in the URI:
+@example
+qemu-system-i386 -cdrom nbd://localhost/debian-500-ppc-netinst
+qemu-system-i386 -cdrom nbd://localhost/openSUSE-11.1-ppc-netinst
@end example
-If the nbd-server uses named exports (since NBD 2.9.18), you must use the
-"exportname" option:
+The URI syntax for NBD is supported since QEMU 1.3. An alternative syntax is
+also available. Here are some example of the older syntax:
@example
-qemu-system-i386 -cdrom nbd:localhost:exportname=debian-500-ppc-netinst
-qemu-system-i386 -cdrom nbd:localhost:exportname=openSUSE-11.1-ppc-netinst
+qemu-system-i386 linux.img -hdb nbd:my_nbd_server.mydomain.org:1024
+qemu-system-i386 linux2.img -hdb nbd:unix:/tmp/my_socket
+qemu-system-i386 -cdrom nbd:localhost:10809:exportname=debian-500-ppc-netinst
@end example
@node disk_images_sheepdog
in a configuration file provided via '-readconfig' or directly on the
command line.
+If the initiator-name is not specified qemu will use a default name
+of 'iqn.2008-11.org.linux-kvm[:<name>'] where <name> is the name of the
+virtual machine.
+
+
@example
Setting a specific initiator name to use when logging in to the target
-iscsi initiator-name=iqn.qemu.test:my-initiator
-cdrom iscsi://127.0.0.1/iqn.qemu.test/2
@end example
+@node disk_images_gluster
+@subsection GlusterFS disk images
+
+GlusterFS is an user space distributed file system.
+
+You can boot from the GlusterFS disk image with the command:
+@example
+qemu-system-x86_64 -drive file=gluster[+@var{transport}]://[@var{server}[:@var{port}]]/@var{volname}/@var{image}[?socket=...]
+@end example
+
+@var{gluster} is the protocol.
+
+@var{transport} specifies the transport type used to connect to gluster
+management daemon (glusterd). Valid transport types are
+tcp, unix and rdma. If a transport type isn't specified, then tcp
+type is assumed.
+
+@var{server} specifies the server where the volume file specification for
+the given volume resides. This can be either hostname, ipv4 address
+or ipv6 address. ipv6 address needs to be within square brackets [ ].
+If transport type is unix, then @var{server} field should not be specifed.
+Instead @var{socket} field needs to be populated with the path to unix domain
+socket.
+
+@var{port} is the port number on which glusterd is listening. This is optional
+and if not specified, QEMU will send 0 which will make gluster to use the
+default port. If the transport type is unix, then @var{port} should not be
+specified.
+
+@var{volname} is the name of the gluster volume which contains the disk image.
+@var{image} is the path to the actual disk image that resides on gluster volume.
+
+You can create a GlusterFS disk image with the command:
+@example
+qemu-img create gluster://@var{server}/@var{volname}/@var{image} @var{size}
+@end example
+
+Examples
+@example
+qemu-system-x86_64 -drive file=gluster://1.2.3.4/testvol/a.img
+qemu-system-x86_64 -drive file=gluster+tcp://1.2.3.4/testvol/a.img
+qemu-system-x86_64 -drive file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img
+qemu-system-x86_64 -drive file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img
+qemu-system-x86_64 -drive file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img
+qemu-system-x86_64 -drive file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img
+qemu-system-x86_64 -drive file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket
+qemu-system-x86_64 -drive file=gluster+rdma://1.2.3.4:24007/testvol/a.img
+@end example
@node pcsys_network
@section Network emulation
to provide high security. The password can be fairly easily brute-forced by
a client making repeat connections. For this reason, a VNC server using password
authentication should be restricted to only listen on the loopback interface
-or UNIX domain sockets. Password authentication is requested with the @code{password}
-option, and then once QEMU is running the password is set with the monitor. Until
-the monitor is used to set the password all clients will be rejected.
+or UNIX domain sockets. Password authentication is not supported when operating
+in FIPS 140-2 compliance mode as it requires the use of the DES cipher. Password
+authentication is requested with the @code{password} option, and then once QEMU
+is running the password is set with the monitor. Until the monitor is used to
+set the password all clients will be rejected.
@example
qemu-system-i386 [...OPTIONS...] -vnc :1,password -monitor stdio
@item -s size
Set the x86 stack size in bytes (default=524288)
@item -cpu model
-Select CPU model (-cpu ? for list and additional feature selection)
+Select CPU model (-cpu help for list and additional feature selection)
@item -ignore-environment
Start with an empty environment. Without this option,
the initial environment is a copy of the caller's environment.
projects / qemu.git / blobdiff