.PHONY: recurse-all recurse-clean recurse-install
recurse-all: $(addsuffix /all, $(TARGET_DIRS) $(ROM_DIRS))
-recurse-fuzz: $(addsuffix /fuzz, $(TARGET_DIRS) $(ROM_DIRS))
recurse-clean: $(addsuffix /clean, $(TARGET_DIRS) $(ROM_DIRS))
recurse-install: $(addsuffix /install, $(TARGET_DIRS))
$(addsuffix /install, $(TARGET_DIRS)): all
endef
distclean: clean
- rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-monitor.texi qemu-monitor-info.texi
+ rm -f config-host.mak config-host.h* $(DOCS)
rm -f tests/tcg/config-*.mak
rm -f config-all-devices.mak config-all-disas.mak config.status
rm -f $(SUBDIR_DEVICES_MAK)
qemu_vga.ndrv \
edk2-licenses.txt \
hppa-firmware.img \
-opensbi-riscv32-virt-fw_jump.bin \
+opensbi-riscv32-sifive_u-fw_jump.bin opensbi-riscv32-virt-fw_jump.bin \
opensbi-riscv64-sifive_u-fw_jump.bin opensbi-riscv64-virt-fw_jump.bin
# Note the use of different doctree for each (manual, builder) tuple;
# this works around Sphinx not handling parallel invocation on
# a single doctree: https://github.com/sphinx-doc/sphinx/issues/2946
-build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" $(SPHINX_BUILD) $(if $(V),,-q) -W -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1-$2 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
+build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" $(SPHINX_BUILD) $(if $(V),,-q) $(SPHINX_WERROR) -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1-$2 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
# We assume all RST files in the manual's directory are used in it
-manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst) \
+manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst $(SRC_PATH)/docs/$1/*/*.rst) \
$(SRC_PATH)/docs/defs.rst.inc \
- $(SRC_PATH)/docs/$1/conf.py $(SRC_PATH)/docs/conf.py
+ $(SRC_PATH)/docs/$1/conf.py $(SRC_PATH)/docs/conf.py \
+ $(SRC_PATH)/docs/sphinx/*.py
# Macro to write out the rule and dependencies for building manpages
# Usage: $(call define-manpage-rule,manualname,manpage1 manpage2...[,extradeps])
# 'extradeps' is optional, and specifies extra files (eg .hx files) that
$(call quiet-command, sed "s|@@VERSION@@|${VERSION}|g" $< >$@, \
"GEN","$@")
-qemu-options.texi: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
-
-qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
-
-qemu-monitor-info.texi: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
-
docs/interop/qemu-qmp-qapi.texi: qapi/qapi-doc.texi
@cp -p $< $@
include $(SRC_PATH)/tests/docker/Makefile.include
include $(SRC_PATH)/tests/vm/Makefile.include
+print-help-run = printf " %-30s - %s\\n" "$1" "$2"
+print-help = $(quiet-@)$(call print-help-run,$1,$2)
+
.PHONY: help
help:
@echo 'Generic targets:'
- @echo ' all - Build all'
+ $(call print-help,all,Build all)
ifdef CONFIG_MODULES
- @echo ' modules - Build all modules'
+ $(call print-help,modules,Build all modules)
endif
- @echo ' dir/file.o - Build specified target only'
- @echo ' install - Install QEMU, documentation and tools'
- @echo ' ctags/TAGS - Generate tags file for editors'
- @echo ' cscope - Generate cscope index'
+ $(call print-help,dir/file.o,Build specified target only)
+ $(call print-help,install,Install QEMU, documentation and tools)
+ $(call print-help,ctags/TAGS,Generate tags file for editors)
+ $(call print-help,cscope,Generate cscope index)
@echo ''
@$(if $(TARGET_DIRS), \
echo 'Architecture specific targets:'; \
$(foreach t, $(TARGET_DIRS), \
- printf " %-30s - Build for %s\\n" $(t)/all $(t);) \
+ $(call print-help-run,$(t)/all,Build for $(t)); \
+ $(if $(CONFIG_FUZZ), \
+ $(if $(findstring softmmu,$(t)), \
+ $(call print-help-run,$(t)/fuzz,Build fuzzer for $(t)); \
+ ))) \
+ echo '')
+ @$(if $(TOOLS), \
+ echo 'Tools targets:'; \
+ $(foreach t, $(TOOLS), \
+ $(call print-help-run,$(t),Build $(shell basename $(t)) tool);) \
echo '')
@echo 'Cleaning targets:'
- @echo ' clean - Remove most generated files but keep the config'
+ $(call print-help,clean,Remove most generated files but keep the config)
ifdef CONFIG_GCOV
- @echo ' clean-coverage - Remove coverage files'
+ $(call print-help,clean-coverage,Remove coverage files)
endif
- @echo ' distclean - Remove all generated files'
- @echo ' dist - Build a distributable tarball'
+ $(call print-help,distclean,Remove all generated files)
+ $(call print-help,dist,Build a distributable tarball)
@echo ''
@echo 'Test targets:'
- @echo ' check - Run all tests (check-help for details)'
- @echo ' docker - Help about targets running tests inside containers'
- @echo ' vm-help - Help about targets running tests inside VM'
+ $(call print-help,check,Run all tests (check-help for details))
+ $(call print-help,docker,Help about targets running tests inside containers)
+ $(call print-help,vm-help,Help about targets running tests inside VM)
@echo ''
@echo 'Documentation targets:'
- @echo ' html info pdf txt'
- @echo ' - Build documentation in specified format'
+ $(call print-help,html info pdf txt,Build documentation in specified format)
ifdef CONFIG_GCOV
- @echo ' coverage-report - Create code coverage report'
+ $(call print-help,coverage-report,Create code coverage report)
endif
@echo ''
ifdef CONFIG_WIN32
@echo 'Windows targets:'
- @echo ' installer - Build NSIS-based installer for QEMU'
+ $(call print-help,installer,Build NSIS-based installer for QEMU)
ifdef QEMU_GA_MSI_ENABLED
- @echo ' msi - Build MSI-based installer for qemu-ga'
+ $(call print-help,msi,Build MSI-based installer for qemu-ga)
endif
@echo ''
endif
- @echo ' $(MAKE) [targets] (quiet build, default)'
- @echo ' $(MAKE) V=1 [targets] (verbose build)'
+ $(call print-help,$(MAKE) [targets],(quiet build, default))
+ $(call print-help,$(MAKE) V=1 [targets],(verbose build))
projects / qemu.git / blobdiff