" suppress-vmdesc=on|off disables self-describing migration (default=off)\n"
" nvdimm=on|off controls NVDIMM support (default=off)\n"
" enforce-config-section=on|off enforce configuration section migration (default=off)\n"
- " s390-squash-mcss=on|off (deprecated) controls support for squashing into default css (default=off)\n",
+ " s390-squash-mcss=on|off (deprecated) controls support for squashing into default css (default=off)\n"
+ " memory-encryption=@var{} memory encryption object to use (default=none)\n",
QEMU_ARCH_ALL)
STEXI
@item -machine [type=]@var{name}[,prop=@var{value}[,...]]
@option{migration.send-configuration} property to @var{off}.
NOTE: this parameter is deprecated. Please use @option{-global}
@option{migration.send-configuration}=@var{on|off} instead.
+@item memory-encryption=@var{}
+Memory encryption object to use. The default is none.
@end table
ETEXI
ETEXI
DEF("balloon", HAS_ARG, QEMU_OPTION_balloon,
- "-balloon none disable balloon device\n"
"-balloon virtio[,addr=str]\n"
- " enable virtio balloon device (default)\n", QEMU_ARCH_ALL)
+ " enable virtio balloon device (deprecated)\n", QEMU_ARCH_ALL)
STEXI
-@item -balloon none
-@findex -balloon
-Disable balloon device.
@item -balloon virtio[,addr=@var{addr}]
-Enable virtio balloon device (default), optionally with PCI address
-@var{addr}.
+@findex -balloon
+Enable virtio balloon device, optionally with PCI address @var{addr}. This
+option is deprecated, use @option{--device virtio-balloon} instead.
ETEXI
DEF("device", HAS_ARG, QEMU_OPTION_device,
@item backing
Reference to or definition of the backing file block device (default is taken
-from the image file). It is allowed to pass an empty string here in order to
-disable the default backing file.
+from the image file). It is allowed to pass @code{null} here in order to disable
+the default backing file.
@item lazy-refcounts
Whether to enable the lazy refcounts feature (on/off; default is taken from the
" VALE port (created on the fly) called 'name' ('nmname' is name of the \n"
" netmap device, defaults to '/dev/netmap')\n"
#endif
+#ifdef CONFIG_POSIX
"-netdev vhost-user,id=str,chardev=dev[,vhostforce=on|off]\n"
" configure a vhost-user network, backed by a chardev 'dev'\n"
+#endif
"-netdev hubport,id=str,hubid=n[,netdev=nd]\n"
" configure a hub port on QEMU VLAN 'n'\n", QEMU_ARCH_ALL)
+DEF("nic", HAS_ARG, QEMU_OPTION_nic,
+ "--nic [tap|bridge|"
+#ifdef CONFIG_SLIRP
+ "user|"
+#endif
+#ifdef __linux__
+ "l2tpv3|"
+#endif
+#ifdef CONFIG_VDE
+ "vde|"
+#endif
+#ifdef CONFIG_NETMAP
+ "netmap|"
+#endif
+#ifdef CONFIG_POSIX
+ "vhost-user|"
+#endif
+ "socket][,option][,...][mac=macaddr]\n"
+ " initialize an on-board / default host NIC (using MAC address\n"
+ " macaddr) and connect it to the given host network backend\n"
+ "--nic none use it alone to have zero network devices (the default is to\n"
+ " provided a 'user' network connection)\n",
+ QEMU_ARCH_ALL)
DEF("net", HAS_ARG, QEMU_OPTION_net,
"-net nic[,vlan=n][,netdev=nd][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n"
" configure or create an on-board (or machine default) NIC and\n"
" connect it either to VLAN 'n' or the netdev 'nd' (for pluggable\n"
" NICs please use '-device devtype,netdev=nd' instead)\n"
- "-net dump[,vlan=n][,file=f][,len=n]\n"
- " dump traffic on vlan 'n' to file 'f' (max n bytes per packet)\n"
- "-net none use it alone to have zero network devices. If no -net option\n"
- " is provided, the default is '-net nic -net user'\n"
"-net ["
#ifdef CONFIG_SLIRP
"user|"
-device virtio-net-pci,netdev=net0
@end example
-@item -net dump[,vlan=@var{n}][,file=@var{file}][,len=@var{len}]
-Dump network traffic on VLAN @var{n} to file @var{file} (@file{qemu-vlan0.pcap} by default).
-At most @var{len} bytes (64k by default) per packet are stored. The file format is
-libpcap, so it can be analyzed with tools such as tcpdump or Wireshark.
-Note: For devices created with '-netdev', use '-object filter-dump,...' instead.
+@item --nic [tap|bridge|user|l2tpv3|vde|netmap|vhost-user|socket][,...][,mac=macaddr]
+
+This option is a shortcut for setting both, the on-board (default) guest NIC
+hardware and the host network backend in one go. The host backend options are
+the same as with the corresponding @option{--netdev} option. The guest NIC
+hardware MAC address can be set with @option{mac=@var{macaddr}}.
-@item -net none
-Indicate that no network devices should be configured. It is used to
-override the default configuration (@option{-net nic -net user}) which
-is activated if no @option{-net} options are provided.
+@item --nic none
+Indicate that no network devices should be configured. It is used to override
+the default configuration (default NIC with @option{--net user} backend) which
+is activated if no other networking options are provided.
ETEXI
STEXI
data=$SECRET,iv=$(<iv.b64)
@end example
+@item -object sev-guest,id=@var{id},cbitpos=@var{cbitpos},reduced-phys-bits=@var{val},[sev-device=@var{string},policy=@var{policy},handle=@var{handle},dh-cert-file=@var{file},session-file=@var{file}]
+
+Create a Secure Encrypted Virtualization (SEV) guest object, which can be used
+to provide the guest memory encryption support on AMD processors.
+
+When memory encryption is enabled, one of the physical address bit (aka the
+C-bit) is utilized to mark if a memory page is protected. The @option{cbitpos}
+is used to provide the C-bit position. The C-bit position is Host family dependent
+hence user must provide this value. On EPYC, the value should be 47.
+
+When memory encryption is enabled, we loose certain bits in physical address space.
+The @option{reduced-phys-bits} is used to provide the number of bits we loose in
+physical address space. Similar to C-bit, the value is Host family dependent.
+On EPYC, the value should be 5.
+
+The @option{sev-device} provides the device file to use for communicating with
+the SEV firmware running inside AMD Secure Processor. The default device is
+'/dev/sev'. If hardware supports memory encryption then /dev/sev devices are
+created by CCP driver.
+
+The @option{policy} provides the guest policy to be enforced by the SEV firmware
+and restrict what configuration and operational commands can be performed on this
+guest by the hypervisor. The policy should be provided by the guest owner and is
+bound to the guest and cannot be changed throughout the lifetime of the guest.
+The default is 0.
+
+If guest @option{policy} allows sharing the key with another SEV guest then
+@option{handle} can be use to provide handle of the guest from which to share
+the key.
+
+The @option{dh-cert-file} and @option{session-file} provides the guest owner's
+Public Diffie-Hillman key defined in SEV spec. The PDH and session parameters
+are used for establishing a cryptographic session with the guest owner to
+negotiate keys used for attestation. The file must be encoded in base64.
+
+e.g to launch a SEV guest
+@example
+ # $QEMU \
+ ......
+ -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \
+ -machine ...,memory-encryption=sev0
+ .....
+
+@end example
@end table
ETEXI
projects / qemu.git / blobdiff