#include "gdbstub.h"
#include "qemu-timer.h"
#include "qemu-char.h"
+#include "cache-utils.h"
#include "block.h"
#include "audio/audio.h"
#include "migration.h"
#include "kvm.h"
+#include "balloon.h"
#include <unistd.h>
#include <fcntl.h>
#include "exec-all.h"
-#define DEFAULT_NETWORK_SCRIPT "/etc/qemu-ifup"
-#define DEFAULT_NETWORK_DOWN_SCRIPT "/etc/qemu-ifdown"
-#ifdef __sun__
-#define SMBD_COMMAND "/usr/sfw/sbin/smbd"
-#else
-#define SMBD_COMMAND "/usr/sbin/smbd"
-#endif
-
//#define DEBUG_UNUSED_IOPORT
//#define DEBUG_IOPORT
//#define DEBUG_NET
int smp_cpus = 1;
const char *vnc_display;
int acpi_enabled = 1;
+int no_hpet = 0;
int fd_bootchk = 1;
int no_reboot = 0;
int no_shutdown = 0;
#endif
const char *qemu_name;
int alt_grab = 0;
-#ifdef TARGET_SPARC
+#if defined(TARGET_SPARC) || defined(TARGET_PPC)
unsigned int nb_prom_envs = 0;
const char *prom_envs[MAX_PROM_ENVS];
#endif
va_end(ap);
abort();
}
+
+/***************/
+/* ballooning */
+
+static QEMUBalloonEvent *qemu_balloon_event;
+void *qemu_balloon_event_opaque;
+
+void qemu_add_balloon_handler(QEMUBalloonEvent *func, void *opaque)
+{
+ qemu_balloon_event = func;
+ qemu_balloon_event_opaque = opaque;
+}
+
+void qemu_balloon(ram_addr_t target)
+{
+ if (qemu_balloon_event)
+ qemu_balloon_event(qemu_balloon_event_opaque, target);
+}
+
+ram_addr_t qemu_balloon_status(void)
+{
+ if (qemu_balloon_event)
+ return qemu_balloon_event(qemu_balloon_event_opaque, 0);
+ return 0;
+}
/***********************************************************/
/* keyboard/mouse */
{
int i;
int cur = 0;
- int count = (sizeof(alarm_timers) / sizeof(*alarm_timers)) - 1;
+ int count = ARRAY_SIZE(alarm_timers) - 1;
char *arg;
char *name;
struct qemu_alarm_timer tmp;
} while ((len == -1 && errno == EINTR) || len > 0);
#endif
- /* vm time timers */
- if (vm_running && likely(!(cur_cpu->singlestep_enabled & SSTEP_NOTIMER)))
- qemu_run_timers(&active_timers[QEMU_TIMER_VIRTUAL],
- qemu_get_clock(vm_clock));
-
- /* real time timers */
- qemu_run_timers(&active_timers[QEMU_TIMER_REALTIME],
- qemu_get_clock(rt_clock));
-
if (t->flags & ALARM_FLAG_EXPIRED) {
alarm_timer->flags &= ~ALARM_FLAG_EXPIRED;
qemu_rearm_alarm_timer(alarm_timer);
return max_bus;
}
+const char *drive_get_serial(BlockDriverState *bdrv)
+{
+ int index;
+
+ for (index = 0; index < nb_drives; index++)
+ if (drives_table[index].bdrv == bdrv)
+ return drives_table[index].serial;
+
+ return "\0";
+}
+
static void bdrv_format_print(void *opaque, const char *name)
{
fprintf(stderr, " %s", name);
char buf[128];
char file[1024];
char devname[128];
+ char serial[21];
const char *mediastr = "";
BlockInterfaceType type;
enum { MEDIA_DISK, MEDIA_CDROM } media;
static const char * const params[] = { "bus", "unit", "if", "index",
"cyls", "heads", "secs", "trans",
"media", "snapshot", "file",
- "cache", "format", NULL };
+ "cache", "format", "serial", NULL };
if (check_params(buf, sizeof(buf), params, str) < 0) {
fprintf(stderr, "qemu: unknown parameter '%s' in '%s'\n",
unit_id = -1;
translation = BIOS_ATA_TRANSLATION_AUTO;
index = -1;
- cache = 1;
+ cache = 3;
if (machine->use_scsi) {
type = IF_SCSI;
} else if (!strcmp(buf, "sd")) {
type = IF_SD;
max_devs = 0;
- } else {
+ } else if (!strcmp(buf, "virtio")) {
+ type = IF_VIRTIO;
+ max_devs = 0;
+ } else {
fprintf(stderr, "qemu: '%s' unsupported bus type '%s'\n", str, buf);
return -1;
}
else
pstrcpy(file, sizeof(file), arg->file);
+ if (!get_param_value(serial, sizeof(serial), "serial", str))
+ memset(serial, 0, sizeof(serial));
+
/* compute bus and unit according index */
if (index != -1) {
drives_table[nb_drives].type = type;
drives_table[nb_drives].bus = bus_id;
drives_table[nb_drives].unit = unit_id;
+ strncpy(drives_table[nb_drives].serial, serial, sizeof(serial));
nb_drives++;
switch(type) {
break;
case IF_PFLASH:
case IF_MTD:
+ case IF_VIRTIO:
break;
}
if (!file[0])
bdrv_flags |= BDRV_O_NOCACHE;
else if (cache == 2) /* write-back */
bdrv_flags |= BDRV_O_CACHE_WB;
+ else if (cache == 3) /* not specified */
+ bdrv_flags |= BDRV_O_CACHE_DEF;
if (bdrv_open2(bdrv, file, bdrv_flags, drv) < 0 || qemu_key_check(bdrv, file)) {
fprintf(stderr, "qemu: could not open disk image %s\n",
file);
}
#ifdef _WIN32
-void host_main_loop_wait(int *timeout)
+static void host_main_loop_wait(int *timeout)
{
int ret, ret2, i;
PollingEntry *pe;
*timeout = 0;
}
#else
-void host_main_loop_wait(int *timeout)
+static void host_main_loop_wait(int *timeout)
{
}
#endif
}
#endif
+ /* vm time timers */
+ if (vm_running && likely(!(cur_cpu->singlestep_enabled & SSTEP_NOTIMER)))
+ qemu_run_timers(&active_timers[QEMU_TIMER_VIRTUAL],
+ qemu_get_clock(vm_clock));
+
+ /* real time timers */
+ qemu_run_timers(&active_timers[QEMU_TIMER_REALTIME],
+ qemu_get_clock(rt_clock));
+
/* Check bottom-halves last in case any of the earlier events triggered
them. */
qemu_bh_poll();
ret = EXCP_INTERRUPT;
}
if (unlikely(ret == EXCP_DEBUG)) {
+ gdb_set_stop_cpu(cur_cpu);
vm_stop(EXCP_DEBUG);
}
/* If all cpus are halted then wait until the next IRQ */
"-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n"
"-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
" [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
- " [,cache=writethrough|writeback|none][,format=f]\n"
+ " [,cache=writethrough|writeback|none][,format=f][,serial=s]\n"
" use 'file' as a drive image\n"
"-mtdblock file use 'file' as on-board Flash memory image\n"
"-sd file use 'file' as SecureDigital card image\n"
"-uuid %%08x-%%04x-%%04x-%%04x-%%012x specify machine UUID\n"
"\n"
"Network options:\n"
- "-net nic[,vlan=n][,macaddr=addr][,model=type]\n"
+ "-net nic[,vlan=n][,macaddr=addr][,model=type][,name=str]\n"
" create a new Network Interface Card and connect it to VLAN 'n'\n"
#ifdef CONFIG_SLIRP
- "-net user[,vlan=n][,hostname=host]\n"
+ "-net user[,vlan=n][,name=str][,hostname=host]\n"
" connect the user mode network stack to VLAN 'n' and send\n"
" hostname 'host' to DHCP clients\n"
#endif
#ifdef _WIN32
- "-net tap[,vlan=n],ifname=name\n"
+ "-net tap[,vlan=n][,name=str],ifname=name\n"
" connect the host TAP network interface to VLAN 'n'\n"
#else
- "-net tap[,vlan=n][,fd=h][,ifname=name][,script=file][,downscript=dfile]\n"
+ "-net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile]\n"
" connect the host TAP network interface to VLAN 'n' and use the\n"
" network scripts 'file' (default=%s)\n"
" and 'dfile' (default=%s);\n"
" use '[down]script=no' to disable script execution;\n"
" use 'fd=h' to connect to an already opened TAP interface\n"
#endif
- "-net socket[,vlan=n][,fd=h][,listen=[host]:port][,connect=host:port]\n"
+ "-net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]\n"
" connect the vlan 'n' to another VLAN using a socket connection\n"
- "-net socket[,vlan=n][,fd=h][,mcast=maddr:port]\n"
+ "-net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]\n"
" connect the vlan 'n' to multicast maddr and port\n"
#ifdef CONFIG_VDE
- "-net vde[,vlan=n][,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]\n"
+ "-net vde[,vlan=n][,name=str][,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]\n"
" connect the vlan 'n' to port 'n' of a vde switch running\n"
" on host and listening for incoming connections on 'socketpath'.\n"
" Use group 'groupname' and mode 'octalmode' to change default\n"
#endif
#ifdef TARGET_I386
"-no-acpi disable ACPI\n"
+ "-no-hpet disable HPET\n"
#endif
#ifdef CONFIG_CURSES
"-curses use a curses/ncurses interface instead of SDL\n"
QEMU_OPTION_smp,
QEMU_OPTION_vnc,
QEMU_OPTION_no_acpi,
+ QEMU_OPTION_no_hpet,
QEMU_OPTION_curses,
QEMU_OPTION_no_reboot,
QEMU_OPTION_no_shutdown,
/* temporary options */
{ "usb", 0, QEMU_OPTION_usb },
{ "no-acpi", 0, QEMU_OPTION_no_acpi },
+ { "no-hpet", 0, QEMU_OPTION_no_hpet },
{ "no-reboot", 0, QEMU_OPTION_no_reboot },
{ "no-shutdown", 0, QEMU_OPTION_no_shutdown },
{ "show-cursor", 0, QEMU_OPTION_show_cursor },
{ "semihosting", 0, QEMU_OPTION_semihosting },
#endif
{ "name", HAS_ARG, QEMU_OPTION_name },
-#if defined(TARGET_SPARC)
+#if defined(TARGET_SPARC) || defined(TARGET_PPC)
{ "prom-env", HAS_ARG, QEMU_OPTION_prom_env },
#endif
#if defined(TARGET_ARM)
{ .init_isa = pcspk_audio_init }
},
#endif
+
+#ifdef CONFIG_SB16
{
"sb16",
"Creative Sound Blaster 16",
1,
{ .init_isa = SB16_init }
},
+#endif
#ifdef CONFIG_CS4231A
{
},
#endif
+#ifdef CONFIG_ES1370
{
"es1370",
"ENSONIQ AudioPCI ES1370",
},
#endif
+#endif /* HAS_AUDIO_CHOICE */
+
{ NULL, NULL, 0, 0, { NULL } }
};
#endif
-int main(int argc, char **argv)
+int main(int argc, char **argv, char **envp)
{
#ifdef CONFIG_GDBSTUB
int use_gdbstub;
int autostart;
const char *incoming = NULL;
+ qemu_cache_utils_init(envp);
+
LIST_INIT (&vm_change_state_head);
#ifndef _WIN32
{
case QEMU_OPTION_no_acpi:
acpi_enabled = 0;
break;
+ case QEMU_OPTION_no_hpet:
+ no_hpet = 1;
+ break;
case QEMU_OPTION_no_reboot:
no_reboot = 1;
break;
case QEMU_OPTION_name:
qemu_name = optarg;
break;
-#ifdef TARGET_SPARC
+#if defined(TARGET_SPARC) || defined(TARGET_PPC)
case QEMU_OPTION_prom_env:
if (nb_prom_envs >= MAX_PROM_ENVS) {
fprintf(stderr, "Too many prom variables\n");
machine->init(ram_size, vga_ram_size, boot_devices, ds,
kernel_filename, kernel_cmdline, initrd_filename, cpu_model);
+ /* Set KVM's vcpu state to qemu's initial CPUState. */
+ if (kvm_enabled()) {
+ int ret;
+
+ ret = kvm_sync_vcpus();
+ if (ret < 0) {
+ fprintf(stderr, "failed to initialize vcpus\n");
+ exit(1);
+ }
+ }
+
/* init USB devices */
if (usb_enabled) {
for(i = 0; i < usb_devices_index; i++) {
projects / qemu.git / blobdiff