]> Git Repo - qemu.git/blob - hw/pc.c
213ead8555eee0141ce906743a3900e6e9fb467d
[qemu.git] / hw / pc.c
1 /*
2  * QEMU PC System Emulator
3  *
4  * Copyright (c) 2003-2004 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 #include "hw.h"
25 #include "pc.h"
26 #include "fdc.h"
27 #include "pci.h"
28 #include "block.h"
29 #include "sysemu.h"
30 #include "audio/audio.h"
31 #include "net.h"
32 #include "smbus.h"
33 #include "boards.h"
34 #include "console.h"
35
36 /* output Bochs bios info messages */
37 //#define DEBUG_BIOS
38
39 #define BIOS_FILENAME "bios.bin"
40 #define VGABIOS_FILENAME "vgabios.bin"
41 #define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
42
43 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
44
45 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables.  */
46 #define ACPI_DATA_SIZE       0x10000
47
48 #define MAX_IDE_BUS 2
49
50 static fdctrl_t *floppy_controller;
51 static RTCState *rtc_state;
52 static PITState *pit;
53 static IOAPICState *ioapic;
54 static PCIDevice *i440fx_state;
55
56 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
57 {
58 }
59
60 /* MSDOS compatibility mode FPU exception support */
61 static qemu_irq ferr_irq;
62 /* XXX: add IGNNE support */
63 void cpu_set_ferr(CPUX86State *s)
64 {
65     qemu_irq_raise(ferr_irq);
66 }
67
68 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
69 {
70     qemu_irq_lower(ferr_irq);
71 }
72
73 /* TSC handling */
74 uint64_t cpu_get_tsc(CPUX86State *env)
75 {
76     /* Note: when using kqemu, it is more logical to return the host TSC
77        because kqemu does not trap the RDTSC instruction for
78        performance reasons */
79 #if USE_KQEMU
80     if (env->kqemu_enabled) {
81         return cpu_get_real_ticks();
82     } else
83 #endif
84     {
85         return cpu_get_ticks();
86     }
87 }
88
89 /* SMM support */
90 void cpu_smm_update(CPUState *env)
91 {
92     if (i440fx_state && env == first_cpu)
93         i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
94 }
95
96
97 /* IRQ handling */
98 int cpu_get_pic_interrupt(CPUState *env)
99 {
100     int intno;
101
102     intno = apic_get_interrupt(env);
103     if (intno >= 0) {
104         /* set irq request if a PIC irq is still pending */
105         /* XXX: improve that */
106         pic_update_irq(isa_pic);
107         return intno;
108     }
109     /* read the irq from the PIC */
110     if (!apic_accept_pic_intr(env))
111         return -1;
112
113     intno = pic_read_irq(isa_pic);
114     return intno;
115 }
116
117 static void pic_irq_request(void *opaque, int irq, int level)
118 {
119     CPUState *env = first_cpu;
120
121     if (env->apic_state) {
122         while (env) {
123             if (apic_accept_pic_intr(env))
124                 apic_deliver_pic_intr(env, level);
125             env = env->next_cpu;
126         }
127     } else {
128         if (level)
129             cpu_interrupt(env, CPU_INTERRUPT_HARD);
130         else
131             cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
132     }
133 }
134
135 /* PC cmos mappings */
136
137 #define REG_EQUIPMENT_BYTE          0x14
138
139 static int cmos_get_fd_drive_type(int fd0)
140 {
141     int val;
142
143     switch (fd0) {
144     case 0:
145         /* 1.44 Mb 3"5 drive */
146         val = 4;
147         break;
148     case 1:
149         /* 2.88 Mb 3"5 drive */
150         val = 5;
151         break;
152     case 2:
153         /* 1.2 Mb 5"5 drive */
154         val = 2;
155         break;
156     default:
157         val = 0;
158         break;
159     }
160     return val;
161 }
162
163 static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
164 {
165     RTCState *s = rtc_state;
166     int cylinders, heads, sectors;
167     bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
168     rtc_set_memory(s, type_ofs, 47);
169     rtc_set_memory(s, info_ofs, cylinders);
170     rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
171     rtc_set_memory(s, info_ofs + 2, heads);
172     rtc_set_memory(s, info_ofs + 3, 0xff);
173     rtc_set_memory(s, info_ofs + 4, 0xff);
174     rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
175     rtc_set_memory(s, info_ofs + 6, cylinders);
176     rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
177     rtc_set_memory(s, info_ofs + 8, sectors);
178 }
179
180 /* convert boot_device letter to something recognizable by the bios */
181 static int boot_device2nibble(char boot_device)
182 {
183     switch(boot_device) {
184     case 'a':
185     case 'b':
186         return 0x01; /* floppy boot */
187     case 'c':
188         return 0x02; /* hard drive boot */
189     case 'd':
190         return 0x03; /* CD-ROM boot */
191     case 'n':
192         return 0x04; /* Network boot */
193     }
194     return 0;
195 }
196
197 /* copy/pasted from cmos_init, should be made a general function
198  and used there as well */
199 static int pc_boot_set(void *opaque, const char *boot_device)
200 {
201 #define PC_MAX_BOOT_DEVICES 3
202     RTCState *s = (RTCState *)opaque;
203     int nbds, bds[3] = { 0, };
204     int i;
205
206     nbds = strlen(boot_device);
207     if (nbds > PC_MAX_BOOT_DEVICES) {
208         term_printf("Too many boot devices for PC\n");
209         return(1);
210     }
211     for (i = 0; i < nbds; i++) {
212         bds[i] = boot_device2nibble(boot_device[i]);
213         if (bds[i] == 0) {
214             term_printf("Invalid boot device for PC: '%c'\n",
215                     boot_device[i]);
216             return(1);
217         }
218     }
219     rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
220     rtc_set_memory(s, 0x38, (bds[2] << 4));
221     return(0);
222 }
223
224 /* hd_table must contain 4 block drivers */
225 static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
226                       const char *boot_device, BlockDriverState **hd_table)
227 {
228     RTCState *s = rtc_state;
229     int nbds, bds[3] = { 0, };
230     int val;
231     int fd0, fd1, nb;
232     int i;
233
234     /* various important CMOS locations needed by PC/Bochs bios */
235
236     /* memory size */
237     val = 640; /* base memory in K */
238     rtc_set_memory(s, 0x15, val);
239     rtc_set_memory(s, 0x16, val >> 8);
240
241     val = (ram_size / 1024) - 1024;
242     if (val > 65535)
243         val = 65535;
244     rtc_set_memory(s, 0x17, val);
245     rtc_set_memory(s, 0x18, val >> 8);
246     rtc_set_memory(s, 0x30, val);
247     rtc_set_memory(s, 0x31, val >> 8);
248
249     if (above_4g_mem_size) {
250         rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
251         rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
252         rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
253     }
254
255     if (ram_size > (16 * 1024 * 1024))
256         val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
257     else
258         val = 0;
259     if (val > 65535)
260         val = 65535;
261     rtc_set_memory(s, 0x34, val);
262     rtc_set_memory(s, 0x35, val >> 8);
263
264     /* set the number of CPU */
265     rtc_set_memory(s, 0x5f, smp_cpus - 1);
266
267     /* set boot devices, and disable floppy signature check if requested */
268 #define PC_MAX_BOOT_DEVICES 3
269     nbds = strlen(boot_device);
270     if (nbds > PC_MAX_BOOT_DEVICES) {
271         fprintf(stderr, "Too many boot devices for PC\n");
272         exit(1);
273     }
274     for (i = 0; i < nbds; i++) {
275         bds[i] = boot_device2nibble(boot_device[i]);
276         if (bds[i] == 0) {
277             fprintf(stderr, "Invalid boot device for PC: '%c'\n",
278                     boot_device[i]);
279             exit(1);
280         }
281     }
282     rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
283     rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ?  0x0 : 0x1));
284
285     /* floppy type */
286
287     fd0 = fdctrl_get_drive_type(floppy_controller, 0);
288     fd1 = fdctrl_get_drive_type(floppy_controller, 1);
289
290     val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
291     rtc_set_memory(s, 0x10, val);
292
293     val = 0;
294     nb = 0;
295     if (fd0 < 3)
296         nb++;
297     if (fd1 < 3)
298         nb++;
299     switch (nb) {
300     case 0:
301         break;
302     case 1:
303         val |= 0x01; /* 1 drive, ready for boot */
304         break;
305     case 2:
306         val |= 0x41; /* 2 drives, ready for boot */
307         break;
308     }
309     val |= 0x02; /* FPU is there */
310     val |= 0x04; /* PS/2 mouse installed */
311     rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
312
313     /* hard drives */
314
315     rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
316     if (hd_table[0])
317         cmos_init_hd(0x19, 0x1b, hd_table[0]);
318     if (hd_table[1])
319         cmos_init_hd(0x1a, 0x24, hd_table[1]);
320
321     val = 0;
322     for (i = 0; i < 4; i++) {
323         if (hd_table[i]) {
324             int cylinders, heads, sectors, translation;
325             /* NOTE: bdrv_get_geometry_hint() returns the physical
326                 geometry.  It is always such that: 1 <= sects <= 63, 1
327                 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
328                 geometry can be different if a translation is done. */
329             translation = bdrv_get_translation_hint(hd_table[i]);
330             if (translation == BIOS_ATA_TRANSLATION_AUTO) {
331                 bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
332                 if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
333                     /* No translation. */
334                     translation = 0;
335                 } else {
336                     /* LBA translation. */
337                     translation = 1;
338                 }
339             } else {
340                 translation--;
341             }
342             val |= translation << (i * 2);
343         }
344     }
345     rtc_set_memory(s, 0x39, val);
346 }
347
348 void ioport_set_a20(int enable)
349 {
350     /* XXX: send to all CPUs ? */
351     cpu_x86_set_a20(first_cpu, enable);
352 }
353
354 int ioport_get_a20(void)
355 {
356     return ((first_cpu->a20_mask >> 20) & 1);
357 }
358
359 static void ioport92_write(void *opaque, uint32_t addr, uint32_t val)
360 {
361     ioport_set_a20((val >> 1) & 1);
362     /* XXX: bit 0 is fast reset */
363 }
364
365 static uint32_t ioport92_read(void *opaque, uint32_t addr)
366 {
367     return ioport_get_a20() << 1;
368 }
369
370 /***********************************************************/
371 /* Bochs BIOS debug ports */
372
373 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
374 {
375     static const char shutdown_str[8] = "Shutdown";
376     static int shutdown_index = 0;
377
378     switch(addr) {
379         /* Bochs BIOS messages */
380     case 0x400:
381     case 0x401:
382         fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
383         exit(1);
384     case 0x402:
385     case 0x403:
386 #ifdef DEBUG_BIOS
387         fprintf(stderr, "%c", val);
388 #endif
389         break;
390     case 0x8900:
391         /* same as Bochs power off */
392         if (val == shutdown_str[shutdown_index]) {
393             shutdown_index++;
394             if (shutdown_index == 8) {
395                 shutdown_index = 0;
396                 qemu_system_shutdown_request();
397             }
398         } else {
399             shutdown_index = 0;
400         }
401         break;
402
403         /* LGPL'ed VGA BIOS messages */
404     case 0x501:
405     case 0x502:
406         fprintf(stderr, "VGA BIOS panic, line %d\n", val);
407         exit(1);
408     case 0x500:
409     case 0x503:
410 #ifdef DEBUG_BIOS
411         fprintf(stderr, "%c", val);
412 #endif
413         break;
414     }
415 }
416
417 static void bochs_bios_init(void)
418 {
419     register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
420     register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
421     register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
422     register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
423     register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
424
425     register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
426     register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
427     register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
428     register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
429 }
430
431 /* Generate an initial boot sector which sets state and jump to
432    a specified vector */
433 static void generate_bootsect(uint32_t gpr[8], uint16_t segs[6], uint16_t ip)
434 {
435     uint8_t bootsect[512], *p;
436     int i;
437     int hda;
438
439     hda = drive_get_index(IF_IDE, 0, 0);
440     if (hda == -1) {
441         fprintf(stderr, "A disk image must be given for 'hda' when booting "
442                 "a Linux kernel\n(if you really don't want it, use /dev/zero)\n");
443         exit(1);
444     }
445
446     memset(bootsect, 0, sizeof(bootsect));
447
448     /* Copy the MSDOS partition table if possible */
449     bdrv_read(drives_table[hda].bdrv, 0, bootsect, 1);
450
451     /* Make sure we have a partition signature */
452     bootsect[510] = 0x55;
453     bootsect[511] = 0xaa;
454
455     /* Actual code */
456     p = bootsect;
457     *p++ = 0xfa;                /* CLI */
458     *p++ = 0xfc;                /* CLD */
459
460     for (i = 0; i < 6; i++) {
461         if (i == 1)             /* Skip CS */
462             continue;
463
464         *p++ = 0xb8;            /* MOV AX,imm16 */
465         *p++ = segs[i];
466         *p++ = segs[i] >> 8;
467         *p++ = 0x8e;            /* MOV <seg>,AX */
468         *p++ = 0xc0 + (i << 3);
469     }
470
471     for (i = 0; i < 8; i++) {
472         *p++ = 0x66;            /* 32-bit operand size */
473         *p++ = 0xb8 + i;        /* MOV <reg>,imm32 */
474         *p++ = gpr[i];
475         *p++ = gpr[i] >> 8;
476         *p++ = gpr[i] >> 16;
477         *p++ = gpr[i] >> 24;
478     }
479
480     *p++ = 0xea;                /* JMP FAR */
481     *p++ = ip;                  /* IP */
482     *p++ = ip >> 8;
483     *p++ = segs[1];             /* CS */
484     *p++ = segs[1] >> 8;
485
486     bdrv_set_boot_sector(drives_table[hda].bdrv, bootsect, sizeof(bootsect));
487 }
488
489 static long get_file_size(FILE *f)
490 {
491     long where, size;
492
493     /* XXX: on Unix systems, using fstat() probably makes more sense */
494
495     where = ftell(f);
496     fseek(f, 0, SEEK_END);
497     size = ftell(f);
498     fseek(f, where, SEEK_SET);
499
500     return size;
501 }
502
503 static void load_linux(const char *kernel_filename,
504                        const char *initrd_filename,
505                        const char *kernel_cmdline)
506 {
507     uint16_t protocol;
508     uint32_t gpr[8];
509     uint16_t seg[6];
510     uint16_t real_seg;
511     int setup_size, kernel_size, initrd_size, cmdline_size;
512     uint32_t initrd_max;
513     uint8_t header[1024];
514     target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr;
515     FILE *f, *fi;
516
517     /* Align to 16 bytes as a paranoia measure */
518     cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
519
520     /* load the kernel header */
521     f = fopen(kernel_filename, "rb");
522     if (!f || !(kernel_size = get_file_size(f)) ||
523         fread(header, 1, 1024, f) != 1024) {
524         fprintf(stderr, "qemu: could not load kernel '%s'\n",
525                 kernel_filename);
526         exit(1);
527     }
528
529     /* kernel protocol version */
530 #if 0
531     fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
532 #endif
533     if (ldl_p(header+0x202) == 0x53726448)
534         protocol = lduw_p(header+0x206);
535     else
536         protocol = 0;
537
538     if (protocol < 0x200 || !(header[0x211] & 0x01)) {
539         /* Low kernel */
540         real_addr    = 0x90000;
541         cmdline_addr = 0x9a000 - cmdline_size;
542         prot_addr    = 0x10000;
543     } else if (protocol < 0x202) {
544         /* High but ancient kernel */
545         real_addr    = 0x90000;
546         cmdline_addr = 0x9a000 - cmdline_size;
547         prot_addr    = 0x100000;
548     } else {
549         /* High and recent kernel */
550         real_addr    = 0x10000;
551         cmdline_addr = 0x20000;
552         prot_addr    = 0x100000;
553     }
554
555 #if 0
556     fprintf(stderr,
557             "qemu: real_addr     = 0x" TARGET_FMT_plx "\n"
558             "qemu: cmdline_addr  = 0x" TARGET_FMT_plx "\n"
559             "qemu: prot_addr     = 0x" TARGET_FMT_plx "\n",
560             real_addr,
561             cmdline_addr,
562             prot_addr);
563 #endif
564
565     /* highest address for loading the initrd */
566     if (protocol >= 0x203)
567         initrd_max = ldl_p(header+0x22c);
568     else
569         initrd_max = 0x37ffffff;
570
571     if (initrd_max >= ram_size-ACPI_DATA_SIZE)
572         initrd_max = ram_size-ACPI_DATA_SIZE-1;
573
574     /* kernel command line */
575     pstrcpy_targphys(cmdline_addr, 4096, kernel_cmdline);
576
577     if (protocol >= 0x202) {
578         stl_p(header+0x228, cmdline_addr);
579     } else {
580         stw_p(header+0x20, 0xA33F);
581         stw_p(header+0x22, cmdline_addr-real_addr);
582     }
583
584     /* loader type */
585     /* High nybble = B reserved for Qemu; low nybble is revision number.
586        If this code is substantially changed, you may want to consider
587        incrementing the revision. */
588     if (protocol >= 0x200)
589         header[0x210] = 0xB0;
590
591     /* heap */
592     if (protocol >= 0x201) {
593         header[0x211] |= 0x80;  /* CAN_USE_HEAP */
594         stw_p(header+0x224, cmdline_addr-real_addr-0x200);
595     }
596
597     /* load initrd */
598     if (initrd_filename) {
599         if (protocol < 0x200) {
600             fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
601             exit(1);
602         }
603
604         fi = fopen(initrd_filename, "rb");
605         if (!fi) {
606             fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
607                     initrd_filename);
608             exit(1);
609         }
610
611         initrd_size = get_file_size(fi);
612         initrd_addr = (initrd_max-initrd_size) & ~4095;
613
614         fprintf(stderr, "qemu: loading initrd (%#x bytes) at 0x" TARGET_FMT_plx
615                 "\n", initrd_size, initrd_addr);
616
617         if (!fread_targphys_ok(initrd_addr, initrd_size, fi)) {
618             fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
619                     initrd_filename);
620             exit(1);
621         }
622         fclose(fi);
623
624         stl_p(header+0x218, initrd_addr);
625         stl_p(header+0x21c, initrd_size);
626     }
627
628     /* store the finalized header and load the rest of the kernel */
629     cpu_physical_memory_write(real_addr, header, 1024);
630
631     setup_size = header[0x1f1];
632     if (setup_size == 0)
633         setup_size = 4;
634
635     setup_size = (setup_size+1)*512;
636     kernel_size -= setup_size;  /* Size of protected-mode code */
637
638     if (!fread_targphys_ok(real_addr+1024, setup_size-1024, f) ||
639         !fread_targphys_ok(prot_addr, kernel_size, f)) {
640         fprintf(stderr, "qemu: read error on kernel '%s'\n",
641                 kernel_filename);
642         exit(1);
643     }
644     fclose(f);
645
646     /* generate bootsector to set up the initial register state */
647     real_seg = real_addr >> 4;
648     seg[0] = seg[2] = seg[3] = seg[4] = seg[4] = real_seg;
649     seg[1] = real_seg+0x20;     /* CS */
650     memset(gpr, 0, sizeof gpr);
651     gpr[4] = cmdline_addr-real_addr-16; /* SP (-16 is paranoia) */
652
653     generate_bootsect(gpr, seg, 0);
654 }
655
656 static void main_cpu_reset(void *opaque)
657 {
658     CPUState *env = opaque;
659     cpu_reset(env);
660 }
661
662 static const int ide_iobase[2] = { 0x1f0, 0x170 };
663 static const int ide_iobase2[2] = { 0x3f6, 0x376 };
664 static const int ide_irq[2] = { 14, 15 };
665
666 #define NE2000_NB_MAX 6
667
668 static int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
669 static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
670
671 static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
672 static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
673
674 static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
675 static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
676
677 #ifdef HAS_AUDIO
678 static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
679 {
680     struct soundhw *c;
681     int audio_enabled = 0;
682
683     for (c = soundhw; !audio_enabled && c->name; ++c) {
684         audio_enabled = c->enabled;
685     }
686
687     if (audio_enabled) {
688         AudioState *s;
689
690         s = AUD_init ();
691         if (s) {
692             for (c = soundhw; c->name; ++c) {
693                 if (c->enabled) {
694                     if (c->isa) {
695                         c->init.init_isa (s, pic);
696                     }
697                     else {
698                         if (pci_bus) {
699                             c->init.init_pci (pci_bus, s);
700                         }
701                     }
702                 }
703             }
704         }
705     }
706 }
707 #endif
708
709 static void pc_init_ne2k_isa(NICInfo *nd, qemu_irq *pic)
710 {
711     static int nb_ne2k = 0;
712
713     if (nb_ne2k == NE2000_NB_MAX)
714         return;
715     isa_ne2000_init(ne2000_io[nb_ne2k], pic[ne2000_irq[nb_ne2k]], nd);
716     nb_ne2k++;
717 }
718
719 /* PC hardware initialisation */
720 static void pc_init1(ram_addr_t ram_size, int vga_ram_size,
721                      const char *boot_device, DisplayState *ds,
722                      const char *kernel_filename, const char *kernel_cmdline,
723                      const char *initrd_filename,
724                      int pci_enabled, const char *cpu_model)
725 {
726     char buf[1024];
727     int ret, linux_boot, i;
728     ram_addr_t ram_addr, vga_ram_addr, bios_offset, vga_bios_offset;
729     ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
730     int bios_size, isa_bios_size, vga_bios_size;
731     PCIBus *pci_bus;
732     int piix3_devfn = -1;
733     CPUState *env;
734     NICInfo *nd;
735     qemu_irq *cpu_irq;
736     qemu_irq *i8259;
737     int index;
738     BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
739     BlockDriverState *fd[MAX_FD];
740
741     if (ram_size >= 0xe0000000 ) {
742         above_4g_mem_size = ram_size - 0xe0000000;
743         below_4g_mem_size = 0xe0000000;
744     } else {
745         below_4g_mem_size = ram_size;
746     }
747
748     linux_boot = (kernel_filename != NULL);
749
750     /* init CPUs */
751     if (cpu_model == NULL) {
752 #ifdef TARGET_X86_64
753         cpu_model = "qemu64";
754 #else
755         cpu_model = "qemu32";
756 #endif
757     }
758     
759     for(i = 0; i < smp_cpus; i++) {
760         env = cpu_init(cpu_model);
761         if (!env) {
762             fprintf(stderr, "Unable to find x86 CPU definition\n");
763             exit(1);
764         }
765         if (i != 0)
766             env->halted = 1;
767         if (smp_cpus > 1) {
768             /* XXX: enable it in all cases */
769             env->cpuid_features |= CPUID_APIC;
770         }
771         qemu_register_reset(main_cpu_reset, env);
772         if (pci_enabled) {
773             apic_init(env);
774         }
775     }
776
777     vmport_init();
778
779     /* allocate RAM */
780     ram_addr = qemu_ram_alloc(ram_size);
781     cpu_register_physical_memory(0, below_4g_mem_size, ram_addr);
782
783     /* above 4giga memory allocation */
784     if (above_4g_mem_size > 0) {
785         cpu_register_physical_memory((target_phys_addr_t) 0x100000000ULL,
786                                      above_4g_mem_size,
787                                      ram_addr + below_4g_mem_size);
788     }
789
790     /* allocate VGA RAM */
791     vga_ram_addr = qemu_ram_alloc(vga_ram_size);
792
793     /* BIOS load */
794     if (bios_name == NULL)
795         bios_name = BIOS_FILENAME;
796     snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
797     bios_size = get_image_size(buf);
798     if (bios_size <= 0 ||
799         (bios_size % 65536) != 0) {
800         goto bios_error;
801     }
802     bios_offset = qemu_ram_alloc(bios_size);
803     ret = load_image(buf, phys_ram_base + bios_offset);
804     if (ret != bios_size) {
805     bios_error:
806         fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", buf);
807         exit(1);
808     }
809
810     /* VGA BIOS load */
811     if (cirrus_vga_enabled) {
812         snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_CIRRUS_FILENAME);
813     } else {
814         snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
815     }
816     vga_bios_size = get_image_size(buf);
817     if (vga_bios_size <= 0 || vga_bios_size > 65536)
818         goto vga_bios_error;
819     vga_bios_offset = qemu_ram_alloc(65536);
820
821     ret = load_image(buf, phys_ram_base + vga_bios_offset);
822     if (ret != vga_bios_size) {
823     vga_bios_error:
824         fprintf(stderr, "qemu: could not load VGA BIOS '%s'\n", buf);
825         exit(1);
826     }
827
828     /* setup basic memory access */
829     cpu_register_physical_memory(0xc0000, 0x10000,
830                                  vga_bios_offset | IO_MEM_ROM);
831
832     /* map the last 128KB of the BIOS in ISA space */
833     isa_bios_size = bios_size;
834     if (isa_bios_size > (128 * 1024))
835         isa_bios_size = 128 * 1024;
836     cpu_register_physical_memory(0xd0000, (192 * 1024) - isa_bios_size,
837                                  IO_MEM_UNASSIGNED);
838     cpu_register_physical_memory(0x100000 - isa_bios_size,
839                                  isa_bios_size,
840                                  (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
841
842     {
843         ram_addr_t option_rom_offset;
844         int size, offset;
845
846         offset = 0;
847         for (i = 0; i < nb_option_roms; i++) {
848             size = get_image_size(option_rom[i]);
849             if (size < 0) {
850                 fprintf(stderr, "Could not load option rom '%s'\n",
851                         option_rom[i]);
852                 exit(1);
853             }
854             if (size > (0x10000 - offset))
855                 goto option_rom_error;
856             option_rom_offset = qemu_ram_alloc(size);
857             ret = load_image(option_rom[i], phys_ram_base + option_rom_offset);
858             if (ret != size) {
859             option_rom_error:
860                 fprintf(stderr, "Too many option ROMS\n");
861                 exit(1);
862             }
863             size = (size + 4095) & ~4095;
864             cpu_register_physical_memory(0xd0000 + offset,
865                                          size, option_rom_offset | IO_MEM_ROM);
866             offset += size;
867         }
868     }
869
870     /* map all the bios at the top of memory */
871     cpu_register_physical_memory((uint32_t)(-bios_size),
872                                  bios_size, bios_offset | IO_MEM_ROM);
873
874     bochs_bios_init();
875
876     if (linux_boot)
877         load_linux(kernel_filename, initrd_filename, kernel_cmdline);
878
879     cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
880     i8259 = i8259_init(cpu_irq[0]);
881     ferr_irq = i8259[13];
882
883     if (pci_enabled) {
884         pci_bus = i440fx_init(&i440fx_state, i8259);
885         piix3_devfn = piix3_init(pci_bus, -1);
886     } else {
887         pci_bus = NULL;
888     }
889
890     /* init basic PC hardware */
891     register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
892
893     register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
894
895     if (cirrus_vga_enabled) {
896         if (pci_enabled) {
897             pci_cirrus_vga_init(pci_bus,
898                                 ds, phys_ram_base + vga_ram_addr,
899                                 vga_ram_addr, vga_ram_size);
900         } else {
901             isa_cirrus_vga_init(ds, phys_ram_base + vga_ram_addr,
902                                 vga_ram_addr, vga_ram_size);
903         }
904     } else if (vmsvga_enabled) {
905         if (pci_enabled)
906             pci_vmsvga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
907                             vga_ram_addr, vga_ram_size);
908         else
909             fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
910     } else {
911         if (pci_enabled) {
912             pci_vga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
913                          vga_ram_addr, vga_ram_size, 0, 0);
914         } else {
915             isa_vga_init(ds, phys_ram_base + vga_ram_addr,
916                          vga_ram_addr, vga_ram_size);
917         }
918     }
919
920     rtc_state = rtc_init(0x70, i8259[8]);
921
922     qemu_register_boot_set(pc_boot_set, rtc_state);
923
924     register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
925     register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
926
927     if (pci_enabled) {
928         ioapic = ioapic_init();
929     }
930     pit = pit_init(0x40, i8259[0]);
931     pcspk_init(pit);
932     if (pci_enabled) {
933         pic_set_alt_irq_func(isa_pic, ioapic_set_irq, ioapic);
934     }
935
936     for(i = 0; i < MAX_SERIAL_PORTS; i++) {
937         if (serial_hds[i]) {
938             serial_init(serial_io[i], i8259[serial_irq[i]], 115200,
939                         serial_hds[i]);
940         }
941     }
942
943     for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
944         if (parallel_hds[i]) {
945             parallel_init(parallel_io[i], i8259[parallel_irq[i]],
946                           parallel_hds[i]);
947         }
948     }
949
950     for(i = 0; i < nb_nics; i++) {
951         nd = &nd_table[i];
952         if (!nd->model) {
953             if (pci_enabled) {
954                 nd->model = "ne2k_pci";
955             } else {
956                 nd->model = "ne2k_isa";
957             }
958         }
959         if (strcmp(nd->model, "ne2k_isa") == 0) {
960             pc_init_ne2k_isa(nd, i8259);
961         } else if (pci_enabled) {
962             if (strcmp(nd->model, "?") == 0)
963                 fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
964             pci_nic_init(pci_bus, nd, -1);
965         } else if (strcmp(nd->model, "?") == 0) {
966             fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
967             exit(1);
968         } else {
969             fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
970             exit(1);
971         }
972     }
973
974     if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
975         fprintf(stderr, "qemu: too many IDE bus\n");
976         exit(1);
977     }
978
979     for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
980         index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
981         if (index != -1)
982             hd[i] = drives_table[index].bdrv;
983         else
984             hd[i] = NULL;
985     }
986
987     if (pci_enabled) {
988         pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1, i8259);
989     } else {
990         for(i = 0; i < MAX_IDE_BUS; i++) {
991             isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
992                          hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
993         }
994     }
995
996     i8042_init(i8259[1], i8259[12], 0x60);
997     DMA_init(0);
998 #ifdef HAS_AUDIO
999     audio_init(pci_enabled ? pci_bus : NULL, i8259);
1000 #endif
1001
1002     for(i = 0; i < MAX_FD; i++) {
1003         index = drive_get_index(IF_FLOPPY, 0, i);
1004         if (index != -1)
1005             fd[i] = drives_table[index].bdrv;
1006         else
1007             fd[i] = NULL;
1008     }
1009     floppy_controller = fdctrl_init(i8259[6], 2, 0, 0x3f0, fd);
1010
1011     cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
1012
1013     if (pci_enabled && usb_enabled) {
1014         usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
1015     }
1016
1017     if (pci_enabled && acpi_enabled) {
1018         uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
1019         i2c_bus *smbus;
1020
1021         /* TODO: Populate SPD eeprom data.  */
1022         smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100, i8259[9]);
1023         for (i = 0; i < 8; i++) {
1024             smbus_eeprom_device_init(smbus, 0x50 + i, eeprom_buf + (i * 256));
1025         }
1026     }
1027
1028     if (i440fx_state) {
1029         i440fx_init_memory_mappings(i440fx_state);
1030     }
1031
1032     if (pci_enabled) {
1033         int max_bus;
1034         int bus, unit;
1035         void *scsi;
1036
1037         max_bus = drive_get_max_bus(IF_SCSI);
1038
1039         for (bus = 0; bus <= max_bus; bus++) {
1040             scsi = lsi_scsi_init(pci_bus, -1);
1041             for (unit = 0; unit < LSI_MAX_DEVS; unit++) {
1042                 index = drive_get_index(IF_SCSI, bus, unit);
1043                 if (index == -1)
1044                     continue;
1045                 lsi_scsi_attach(scsi, drives_table[index].bdrv, unit);
1046             }
1047         }
1048     }
1049 }
1050
1051 static void pc_init_pci(ram_addr_t ram_size, int vga_ram_size,
1052                         const char *boot_device, DisplayState *ds,
1053                         const char *kernel_filename,
1054                         const char *kernel_cmdline,
1055                         const char *initrd_filename,
1056                         const char *cpu_model)
1057 {
1058     pc_init1(ram_size, vga_ram_size, boot_device, ds,
1059              kernel_filename, kernel_cmdline,
1060              initrd_filename, 1, cpu_model);
1061 }
1062
1063 static void pc_init_isa(ram_addr_t ram_size, int vga_ram_size,
1064                         const char *boot_device, DisplayState *ds,
1065                         const char *kernel_filename,
1066                         const char *kernel_cmdline,
1067                         const char *initrd_filename,
1068                         const char *cpu_model)
1069 {
1070     pc_init1(ram_size, vga_ram_size, boot_device, ds,
1071              kernel_filename, kernel_cmdline,
1072              initrd_filename, 0, cpu_model);
1073 }
1074
1075 QEMUMachine pc_machine = {
1076     .name = "pc",
1077     .desc = "Standard PC",
1078     .init = pc_init_pci,
1079     .ram_require = VGA_RAM_SIZE + PC_MAX_BIOS_SIZE,
1080 };
1081
1082 QEMUMachine isapc_machine = {
1083     .name = "isapc",
1084     .desc = "ISA-only PC",
1085     .init = pc_init_isa,
1086     .ram_require = VGA_RAM_SIZE + PC_MAX_BIOS_SIZE,
1087 };
This page took 0.076208 seconds and 2 git commands to generate.