]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * ARM kernel loader. | |
3 | * | |
4 | * Copyright (c) 2006-2007 CodeSourcery. | |
5 | * Written by Paul Brook | |
6 | * | |
7 | * This code is licensed under the GPL. | |
8 | */ | |
9 | ||
10 | #include "config.h" | |
11 | #include "hw.h" | |
12 | #include "arm-misc.h" | |
13 | #include "sysemu.h" | |
14 | #include "boards.h" | |
15 | #include "loader.h" | |
16 | #include "elf.h" | |
17 | #include "device_tree.h" | |
18 | ||
19 | #define KERNEL_ARGS_ADDR 0x100 | |
20 | #define KERNEL_LOAD_ADDR 0x00010000 | |
21 | #define INITRD_LOAD_ADDR 0x00d00000 | |
22 | ||
23 | /* The worlds second smallest bootloader. Set r0-r2, then jump to kernel. */ | |
24 | static uint32_t bootloader[] = { | |
25 | 0xe3a00000, /* mov r0, #0 */ | |
26 | 0xe59f1004, /* ldr r1, [pc, #4] */ | |
27 | 0xe59f2004, /* ldr r2, [pc, #4] */ | |
28 | 0xe59ff004, /* ldr pc, [pc, #4] */ | |
29 | 0, /* Board ID */ | |
30 | 0, /* Address of kernel args. Set by integratorcp_init. */ | |
31 | 0 /* Kernel entry point. Set by integratorcp_init. */ | |
32 | }; | |
33 | ||
34 | /* Handling for secondary CPU boot in a multicore system. | |
35 | * Unlike the uniprocessor/primary CPU boot, this is platform | |
36 | * dependent. The default code here is based on the secondary | |
37 | * CPU boot protocol used on realview/vexpress boards, with | |
38 | * some parameterisation to increase its flexibility. | |
39 | * QEMU platform models for which this code is not appropriate | |
40 | * should override write_secondary_boot and secondary_cpu_reset_hook | |
41 | * instead. | |
42 | * | |
43 | * This code enables the interrupt controllers for the secondary | |
44 | * CPUs and then puts all the secondary CPUs into a loop waiting | |
45 | * for an interprocessor interrupt and polling a configurable | |
46 | * location for the kernel secondary CPU entry point. | |
47 | */ | |
48 | static uint32_t smpboot[] = { | |
49 | 0xe59f201c, /* ldr r2, gic_cpu_if */ | |
50 | 0xe59f001c, /* ldr r0, startaddr */ | |
51 | 0xe3a01001, /* mov r1, #1 */ | |
52 | 0xe5821000, /* str r1, [r2] */ | |
53 | 0xe320f003, /* wfi */ | |
54 | 0xe5901000, /* ldr r1, [r0] */ | |
55 | 0xe1110001, /* tst r1, r1 */ | |
56 | 0x0afffffb, /* beq <wfi> */ | |
57 | 0xe12fff11, /* bx r1 */ | |
58 | 0, /* gic_cpu_if: base address of GIC CPU interface */ | |
59 | 0 /* bootreg: Boot register address is held here */ | |
60 | }; | |
61 | ||
62 | static void default_write_secondary(ARMCPU *cpu, | |
63 | const struct arm_boot_info *info) | |
64 | { | |
65 | int n; | |
66 | smpboot[ARRAY_SIZE(smpboot) - 1] = info->smp_bootreg_addr; | |
67 | smpboot[ARRAY_SIZE(smpboot) - 2] = info->gic_cpu_if_addr; | |
68 | for (n = 0; n < ARRAY_SIZE(smpboot); n++) { | |
69 | smpboot[n] = tswap32(smpboot[n]); | |
70 | } | |
71 | rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot), | |
72 | info->smp_loader_start); | |
73 | } | |
74 | ||
75 | static void default_reset_secondary(ARMCPU *cpu, | |
76 | const struct arm_boot_info *info) | |
77 | { | |
78 | CPUARMState *env = &cpu->env; | |
79 | ||
80 | stl_phys_notdirty(info->smp_bootreg_addr, 0); | |
81 | env->regs[15] = info->smp_loader_start; | |
82 | } | |
83 | ||
84 | #define WRITE_WORD(p, value) do { \ | |
85 | stl_phys_notdirty(p, value); \ | |
86 | p += 4; \ | |
87 | } while (0) | |
88 | ||
89 | static void set_kernel_args(const struct arm_boot_info *info) | |
90 | { | |
91 | int initrd_size = info->initrd_size; | |
92 | target_phys_addr_t base = info->loader_start; | |
93 | target_phys_addr_t p; | |
94 | ||
95 | p = base + KERNEL_ARGS_ADDR; | |
96 | /* ATAG_CORE */ | |
97 | WRITE_WORD(p, 5); | |
98 | WRITE_WORD(p, 0x54410001); | |
99 | WRITE_WORD(p, 1); | |
100 | WRITE_WORD(p, 0x1000); | |
101 | WRITE_WORD(p, 0); | |
102 | /* ATAG_MEM */ | |
103 | /* TODO: handle multiple chips on one ATAG list */ | |
104 | WRITE_WORD(p, 4); | |
105 | WRITE_WORD(p, 0x54410002); | |
106 | WRITE_WORD(p, info->ram_size); | |
107 | WRITE_WORD(p, info->loader_start); | |
108 | if (initrd_size) { | |
109 | /* ATAG_INITRD2 */ | |
110 | WRITE_WORD(p, 4); | |
111 | WRITE_WORD(p, 0x54420005); | |
112 | WRITE_WORD(p, info->loader_start + INITRD_LOAD_ADDR); | |
113 | WRITE_WORD(p, initrd_size); | |
114 | } | |
115 | if (info->kernel_cmdline && *info->kernel_cmdline) { | |
116 | /* ATAG_CMDLINE */ | |
117 | int cmdline_size; | |
118 | ||
119 | cmdline_size = strlen(info->kernel_cmdline); | |
120 | cpu_physical_memory_write(p + 8, (void *)info->kernel_cmdline, | |
121 | cmdline_size + 1); | |
122 | cmdline_size = (cmdline_size >> 2) + 1; | |
123 | WRITE_WORD(p, cmdline_size + 2); | |
124 | WRITE_WORD(p, 0x54410009); | |
125 | p += cmdline_size * 4; | |
126 | } | |
127 | if (info->atag_board) { | |
128 | /* ATAG_BOARD */ | |
129 | int atag_board_len; | |
130 | uint8_t atag_board_buf[0x1000]; | |
131 | ||
132 | atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; | |
133 | WRITE_WORD(p, (atag_board_len + 8) >> 2); | |
134 | WRITE_WORD(p, 0x414f4d50); | |
135 | cpu_physical_memory_write(p, atag_board_buf, atag_board_len); | |
136 | p += atag_board_len; | |
137 | } | |
138 | /* ATAG_END */ | |
139 | WRITE_WORD(p, 0); | |
140 | WRITE_WORD(p, 0); | |
141 | } | |
142 | ||
143 | static void set_kernel_args_old(const struct arm_boot_info *info) | |
144 | { | |
145 | target_phys_addr_t p; | |
146 | const char *s; | |
147 | int initrd_size = info->initrd_size; | |
148 | target_phys_addr_t base = info->loader_start; | |
149 | ||
150 | /* see linux/include/asm-arm/setup.h */ | |
151 | p = base + KERNEL_ARGS_ADDR; | |
152 | /* page_size */ | |
153 | WRITE_WORD(p, 4096); | |
154 | /* nr_pages */ | |
155 | WRITE_WORD(p, info->ram_size / 4096); | |
156 | /* ramdisk_size */ | |
157 | WRITE_WORD(p, 0); | |
158 | #define FLAG_READONLY 1 | |
159 | #define FLAG_RDLOAD 4 | |
160 | #define FLAG_RDPROMPT 8 | |
161 | /* flags */ | |
162 | WRITE_WORD(p, FLAG_READONLY | FLAG_RDLOAD | FLAG_RDPROMPT); | |
163 | /* rootdev */ | |
164 | WRITE_WORD(p, (31 << 8) | 0); /* /dev/mtdblock0 */ | |
165 | /* video_num_cols */ | |
166 | WRITE_WORD(p, 0); | |
167 | /* video_num_rows */ | |
168 | WRITE_WORD(p, 0); | |
169 | /* video_x */ | |
170 | WRITE_WORD(p, 0); | |
171 | /* video_y */ | |
172 | WRITE_WORD(p, 0); | |
173 | /* memc_control_reg */ | |
174 | WRITE_WORD(p, 0); | |
175 | /* unsigned char sounddefault */ | |
176 | /* unsigned char adfsdrives */ | |
177 | /* unsigned char bytes_per_char_h */ | |
178 | /* unsigned char bytes_per_char_v */ | |
179 | WRITE_WORD(p, 0); | |
180 | /* pages_in_bank[4] */ | |
181 | WRITE_WORD(p, 0); | |
182 | WRITE_WORD(p, 0); | |
183 | WRITE_WORD(p, 0); | |
184 | WRITE_WORD(p, 0); | |
185 | /* pages_in_vram */ | |
186 | WRITE_WORD(p, 0); | |
187 | /* initrd_start */ | |
188 | if (initrd_size) | |
189 | WRITE_WORD(p, info->loader_start + INITRD_LOAD_ADDR); | |
190 | else | |
191 | WRITE_WORD(p, 0); | |
192 | /* initrd_size */ | |
193 | WRITE_WORD(p, initrd_size); | |
194 | /* rd_start */ | |
195 | WRITE_WORD(p, 0); | |
196 | /* system_rev */ | |
197 | WRITE_WORD(p, 0); | |
198 | /* system_serial_low */ | |
199 | WRITE_WORD(p, 0); | |
200 | /* system_serial_high */ | |
201 | WRITE_WORD(p, 0); | |
202 | /* mem_fclk_21285 */ | |
203 | WRITE_WORD(p, 0); | |
204 | /* zero unused fields */ | |
205 | while (p < base + KERNEL_ARGS_ADDR + 256 + 1024) { | |
206 | WRITE_WORD(p, 0); | |
207 | } | |
208 | s = info->kernel_cmdline; | |
209 | if (s) { | |
210 | cpu_physical_memory_write(p, (void *)s, strlen(s) + 1); | |
211 | } else { | |
212 | WRITE_WORD(p, 0); | |
213 | } | |
214 | } | |
215 | ||
216 | static int load_dtb(target_phys_addr_t addr, const struct arm_boot_info *binfo) | |
217 | { | |
218 | #ifdef CONFIG_FDT | |
219 | uint32_t mem_reg_property[] = { cpu_to_be32(binfo->loader_start), | |
220 | cpu_to_be32(binfo->ram_size) }; | |
221 | void *fdt = NULL; | |
222 | char *filename; | |
223 | int size, rc; | |
224 | ||
225 | filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, binfo->dtb_filename); | |
226 | if (!filename) { | |
227 | fprintf(stderr, "Couldn't open dtb file %s\n", binfo->dtb_filename); | |
228 | return -1; | |
229 | } | |
230 | ||
231 | fdt = load_device_tree(filename, &size); | |
232 | if (!fdt) { | |
233 | fprintf(stderr, "Couldn't open dtb file %s\n", filename); | |
234 | g_free(filename); | |
235 | return -1; | |
236 | } | |
237 | g_free(filename); | |
238 | ||
239 | rc = qemu_devtree_setprop(fdt, "/memory", "reg", mem_reg_property, | |
240 | sizeof(mem_reg_property)); | |
241 | if (rc < 0) { | |
242 | fprintf(stderr, "couldn't set /memory/reg\n"); | |
243 | } | |
244 | ||
245 | if (binfo->kernel_cmdline && *binfo->kernel_cmdline) { | |
246 | rc = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs", | |
247 | binfo->kernel_cmdline); | |
248 | if (rc < 0) { | |
249 | fprintf(stderr, "couldn't set /chosen/bootargs\n"); | |
250 | } | |
251 | } | |
252 | ||
253 | if (binfo->initrd_size) { | |
254 | rc = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-start", | |
255 | binfo->loader_start + INITRD_LOAD_ADDR); | |
256 | if (rc < 0) { | |
257 | fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); | |
258 | } | |
259 | ||
260 | rc = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-end", | |
261 | binfo->loader_start + INITRD_LOAD_ADDR + | |
262 | binfo->initrd_size); | |
263 | if (rc < 0) { | |
264 | fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); | |
265 | } | |
266 | } | |
267 | ||
268 | cpu_physical_memory_write(addr, fdt, size); | |
269 | ||
270 | return 0; | |
271 | ||
272 | #else | |
273 | fprintf(stderr, "Device tree requested, " | |
274 | "but qemu was compiled without fdt support\n"); | |
275 | return -1; | |
276 | #endif | |
277 | } | |
278 | ||
279 | static void do_cpu_reset(void *opaque) | |
280 | { | |
281 | ARMCPU *cpu = opaque; | |
282 | CPUARMState *env = &cpu->env; | |
283 | const struct arm_boot_info *info = env->boot_info; | |
284 | ||
285 | cpu_reset(CPU(cpu)); | |
286 | if (info) { | |
287 | if (!info->is_linux) { | |
288 | /* Jump to the entry point. */ | |
289 | env->regs[15] = info->entry & 0xfffffffe; | |
290 | env->thumb = info->entry & 1; | |
291 | } else { | |
292 | if (env == first_cpu) { | |
293 | env->regs[15] = info->loader_start; | |
294 | if (!info->dtb_filename) { | |
295 | if (old_param) { | |
296 | set_kernel_args_old(info); | |
297 | } else { | |
298 | set_kernel_args(info); | |
299 | } | |
300 | } | |
301 | } else { | |
302 | info->secondary_cpu_reset_hook(cpu, info); | |
303 | } | |
304 | } | |
305 | } | |
306 | } | |
307 | ||
308 | void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) | |
309 | { | |
310 | CPUARMState *env = &cpu->env; | |
311 | int kernel_size; | |
312 | int initrd_size; | |
313 | int n; | |
314 | int is_linux = 0; | |
315 | uint64_t elf_entry; | |
316 | target_phys_addr_t entry; | |
317 | int big_endian; | |
318 | QemuOpts *machine_opts; | |
319 | ||
320 | /* Load the kernel. */ | |
321 | if (!info->kernel_filename) { | |
322 | fprintf(stderr, "Kernel image must be specified\n"); | |
323 | exit(1); | |
324 | } | |
325 | ||
326 | machine_opts = qemu_opts_find(qemu_find_opts("machine"), 0); | |
327 | if (machine_opts) { | |
328 | info->dtb_filename = qemu_opt_get(machine_opts, "dtb"); | |
329 | } else { | |
330 | info->dtb_filename = NULL; | |
331 | } | |
332 | ||
333 | if (!info->secondary_cpu_reset_hook) { | |
334 | info->secondary_cpu_reset_hook = default_reset_secondary; | |
335 | } | |
336 | if (!info->write_secondary_boot) { | |
337 | info->write_secondary_boot = default_write_secondary; | |
338 | } | |
339 | ||
340 | if (info->nb_cpus == 0) | |
341 | info->nb_cpus = 1; | |
342 | ||
343 | #ifdef TARGET_WORDS_BIGENDIAN | |
344 | big_endian = 1; | |
345 | #else | |
346 | big_endian = 0; | |
347 | #endif | |
348 | ||
349 | /* Assume that raw images are linux kernels, and ELF images are not. */ | |
350 | kernel_size = load_elf(info->kernel_filename, NULL, NULL, &elf_entry, | |
351 | NULL, NULL, big_endian, ELF_MACHINE, 1); | |
352 | entry = elf_entry; | |
353 | if (kernel_size < 0) { | |
354 | kernel_size = load_uimage(info->kernel_filename, &entry, NULL, | |
355 | &is_linux); | |
356 | } | |
357 | if (kernel_size < 0) { | |
358 | entry = info->loader_start + KERNEL_LOAD_ADDR; | |
359 | kernel_size = load_image_targphys(info->kernel_filename, entry, | |
360 | info->ram_size - KERNEL_LOAD_ADDR); | |
361 | is_linux = 1; | |
362 | } | |
363 | if (kernel_size < 0) { | |
364 | fprintf(stderr, "qemu: could not load kernel '%s'\n", | |
365 | info->kernel_filename); | |
366 | exit(1); | |
367 | } | |
368 | info->entry = entry; | |
369 | if (is_linux) { | |
370 | if (info->initrd_filename) { | |
371 | initrd_size = load_image_targphys(info->initrd_filename, | |
372 | info->loader_start | |
373 | + INITRD_LOAD_ADDR, | |
374 | info->ram_size | |
375 | - INITRD_LOAD_ADDR); | |
376 | if (initrd_size < 0) { | |
377 | fprintf(stderr, "qemu: could not load initrd '%s'\n", | |
378 | info->initrd_filename); | |
379 | exit(1); | |
380 | } | |
381 | } else { | |
382 | initrd_size = 0; | |
383 | } | |
384 | info->initrd_size = initrd_size; | |
385 | ||
386 | bootloader[4] = info->board_id; | |
387 | ||
388 | /* for device tree boot, we pass the DTB directly in r2. Otherwise | |
389 | * we point to the kernel args. | |
390 | */ | |
391 | if (info->dtb_filename) { | |
392 | /* Place the DTB after the initrd in memory */ | |
393 | target_phys_addr_t dtb_start = TARGET_PAGE_ALIGN(info->loader_start | |
394 | + INITRD_LOAD_ADDR | |
395 | + initrd_size); | |
396 | if (load_dtb(dtb_start, info)) { | |
397 | exit(1); | |
398 | } | |
399 | bootloader[5] = dtb_start; | |
400 | } else { | |
401 | bootloader[5] = info->loader_start + KERNEL_ARGS_ADDR; | |
402 | if (info->ram_size >= (1ULL << 32)) { | |
403 | fprintf(stderr, "qemu: RAM size must be less than 4GB to boot" | |
404 | " Linux kernel using ATAGS (try passing a device tree" | |
405 | " using -dtb)\n"); | |
406 | exit(1); | |
407 | } | |
408 | } | |
409 | bootloader[6] = entry; | |
410 | for (n = 0; n < sizeof(bootloader) / 4; n++) { | |
411 | bootloader[n] = tswap32(bootloader[n]); | |
412 | } | |
413 | rom_add_blob_fixed("bootloader", bootloader, sizeof(bootloader), | |
414 | info->loader_start); | |
415 | if (info->nb_cpus > 1) { | |
416 | info->write_secondary_boot(cpu, info); | |
417 | } | |
418 | } | |
419 | info->is_linux = is_linux; | |
420 | ||
421 | for (; env; env = env->next_cpu) { | |
422 | cpu = arm_env_get_cpu(env); | |
423 | env->boot_info = info; | |
424 | qemu_register_reset(do_cpu_reset, cpu); | |
425 | } | |
426 | } |