]>
Commit | Line | Data |
---|---|---|
e6a6d5ab AZ |
1 | /* |
2 | * QEMU Bluetooth HCI USB Transport Layer v1.0 | |
3 | * | |
4 | * Copyright (C) 2007 OpenMoko, Inc. | |
5 | * Copyright (C) 2008 Andrzej Zaborowski <[email protected]> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or | |
8 | * modify it under the terms of the GNU General Public License as | |
9 | * published by the Free Software Foundation; either version 2 or | |
10 | * (at your option) version 3 of the License. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
fad6cb1a AJ |
17 | * You should have received a copy of the GNU General Public License along |
18 | * with this program; if not, write to the Free Software Foundation, Inc., | |
19 | * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | |
e6a6d5ab AZ |
20 | */ |
21 | ||
22 | #include "qemu-common.h" | |
23 | #include "usb.h" | |
24 | #include "net.h" | |
25 | #include "bt.h" | |
26 | ||
27 | struct USBBtState { | |
28 | USBDevice dev; | |
29 | struct HCIInfo *hci; | |
30 | ||
31 | int altsetting; | |
32 | int config; | |
33 | ||
34 | #define CFIFO_LEN_MASK 255 | |
35 | #define DFIFO_LEN_MASK 4095 | |
36 | struct usb_hci_in_fifo_s { | |
37 | uint8_t data[(DFIFO_LEN_MASK + 1) * 2]; | |
38 | struct { | |
39 | uint8_t *data; | |
40 | int len; | |
41 | } fifo[CFIFO_LEN_MASK + 1]; | |
42 | int dstart, dlen, dsize, start, len; | |
43 | } evt, acl, sco; | |
44 | ||
45 | struct usb_hci_out_fifo_s { | |
46 | uint8_t data[4096]; | |
47 | int len; | |
48 | } outcmd, outacl, outsco; | |
49 | }; | |
50 | ||
51 | #define USB_EVT_EP 1 | |
52 | #define USB_ACL_EP 2 | |
53 | #define USB_SCO_EP 3 | |
54 | ||
55 | static const uint8_t qemu_bt_dev_descriptor[] = { | |
56 | 0x12, /* u8 bLength; */ | |
57 | USB_DT_DEVICE, /* u8 bDescriptorType; Device */ | |
58 | 0x10, 0x01, /* u16 bcdUSB; v1.10 */ | |
59 | ||
60 | 0xe0, /* u8 bDeviceClass; Wireless */ | |
61 | 0x01, /* u8 bDeviceSubClass; Radio Frequency */ | |
62 | 0x01, /* u8 bDeviceProtocol; Bluetooth */ | |
63 | 0x40, /* u8 bMaxPacketSize0; 64 Bytes */ | |
64 | ||
65 | 0x12, 0x0a, /* u16 idVendor; */ | |
66 | 0x01, 0x00, /* u16 idProduct; Bluetooth Dongle (HCI mode) */ | |
67 | 0x58, 0x19, /* u16 bcdDevice; (some devices have 0x48, 0x02) */ | |
68 | ||
69 | 0x00, /* u8 iManufacturer; */ | |
70 | 0x00, /* u8 iProduct; */ | |
71 | 0x00, /* u8 iSerialNumber; */ | |
72 | 0x01, /* u8 bNumConfigurations; */ | |
73 | }; | |
74 | ||
75 | static const uint8_t qemu_bt_config_descriptor[] = { | |
76 | /* one configuration */ | |
77 | 0x09, /* u8 bLength; */ | |
78 | USB_DT_CONFIG, /* u8 bDescriptorType; */ | |
79 | 0xb1, 0x00, /* u16 wTotalLength; */ | |
80 | 0x02, /* u8 bNumInterfaces; (2) */ | |
81 | 0x01, /* u8 bConfigurationValue; */ | |
82 | 0x00, /* u8 iConfiguration; */ | |
83 | 0xc0, /* u8 bmAttributes; | |
84 | Bit 7: must be set, | |
85 | 6: Self-powered, | |
86 | 5: Remote wakeup, | |
87 | 4..0: resvd */ | |
88 | 0x00, /* u8 MaxPower; */ | |
89 | ||
90 | /* USB 1.1: | |
91 | * USB 2.0, single TT organization (mandatory): | |
92 | * one interface, protocol 0 | |
93 | * | |
94 | * USB 2.0, multiple TT organization (optional): | |
95 | * two interfaces, protocols 1 (like single TT) | |
96 | * and 2 (multiple TT mode) ... config is | |
97 | * sometimes settable | |
98 | * NOT IMPLEMENTED | |
99 | */ | |
100 | ||
101 | /* interface one */ | |
102 | 0x09, /* u8 if_bLength; */ | |
103 | USB_DT_INTERFACE, /* u8 if_bDescriptorType; */ | |
104 | 0x00, /* u8 if_bInterfaceNumber; */ | |
105 | 0x00, /* u8 if_bAlternateSetting; */ | |
106 | 0x03, /* u8 if_bNumEndpoints; */ | |
107 | 0xe0, /* u8 if_bInterfaceClass; Wireless */ | |
108 | 0x01, /* u8 if_bInterfaceSubClass; Radio Frequency */ | |
109 | 0x01, /* u8 if_bInterfaceProtocol; Bluetooth */ | |
110 | 0x00, /* u8 if_iInterface; */ | |
111 | ||
112 | /* endpoint one */ | |
113 | 0x07, /* u8 ep_bLength; */ | |
114 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
115 | USB_DIR_IN | USB_EVT_EP, /* u8 ep_bEndpointAddress; */ | |
116 | 0x03, /* u8 ep_bmAttributes; Interrupt */ | |
117 | 0x10, 0x00, /* u16 ep_wMaxPacketSize; */ | |
118 | 0x02, /* u8 ep_bInterval; */ | |
119 | ||
120 | /* endpoint two */ | |
121 | 0x07, /* u8 ep_bLength; */ | |
122 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
123 | USB_DIR_OUT | USB_ACL_EP, /* u8 ep_bEndpointAddress; */ | |
124 | 0x02, /* u8 ep_bmAttributes; Bulk */ | |
125 | 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ | |
126 | 0x0a, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
127 | ||
128 | /* endpoint three */ | |
129 | 0x07, /* u8 ep_bLength; */ | |
130 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
131 | USB_DIR_IN | USB_ACL_EP, /* u8 ep_bEndpointAddress; */ | |
132 | 0x02, /* u8 ep_bmAttributes; Bulk */ | |
133 | 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ | |
134 | 0x0a, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
135 | ||
136 | /* interface two setting one */ | |
137 | 0x09, /* u8 if_bLength; */ | |
138 | USB_DT_INTERFACE, /* u8 if_bDescriptorType; */ | |
139 | 0x01, /* u8 if_bInterfaceNumber; */ | |
140 | 0x00, /* u8 if_bAlternateSetting; */ | |
141 | 0x02, /* u8 if_bNumEndpoints; */ | |
142 | 0xe0, /* u8 if_bInterfaceClass; Wireless */ | |
143 | 0x01, /* u8 if_bInterfaceSubClass; Radio Frequency */ | |
144 | 0x01, /* u8 if_bInterfaceProtocol; Bluetooth */ | |
145 | 0x00, /* u8 if_iInterface; */ | |
146 | ||
147 | /* endpoint one */ | |
148 | 0x07, /* u8 ep_bLength; */ | |
149 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
150 | USB_DIR_OUT | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
151 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
152 | 0x00, 0x00, /* u16 ep_wMaxPacketSize; */ | |
153 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
154 | ||
155 | /* endpoint two */ | |
156 | 0x07, /* u8 ep_bLength; */ | |
157 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
158 | USB_DIR_IN | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
159 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
160 | 0x00, 0x00, /* u16 ep_wMaxPacketSize; */ | |
161 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
162 | ||
163 | /* interface two setting two */ | |
164 | 0x09, /* u8 if_bLength; */ | |
165 | USB_DT_INTERFACE, /* u8 if_bDescriptorType; */ | |
166 | 0x01, /* u8 if_bInterfaceNumber; */ | |
167 | 0x01, /* u8 if_bAlternateSetting; */ | |
168 | 0x02, /* u8 if_bNumEndpoints; */ | |
169 | 0xe0, /* u8 if_bInterfaceClass; Wireless */ | |
170 | 0x01, /* u8 if_bInterfaceSubClass; Radio Frequency */ | |
171 | 0x01, /* u8 if_bInterfaceProtocol; Bluetooth */ | |
172 | 0x00, /* u8 if_iInterface; */ | |
173 | ||
174 | /* endpoint one */ | |
175 | 0x07, /* u8 ep_bLength; */ | |
176 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
177 | USB_DIR_OUT | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
178 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
179 | 0x09, 0x00, /* u16 ep_wMaxPacketSize; */ | |
180 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
181 | ||
182 | /* endpoint two */ | |
183 | 0x07, /* u8 ep_bLength; */ | |
184 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
185 | USB_DIR_IN | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
186 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
187 | 0x09, 0x00, /* u16 ep_wMaxPacketSize; */ | |
188 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
189 | ||
190 | /* interface two setting three */ | |
191 | 0x09, /* u8 if_bLength; */ | |
192 | USB_DT_INTERFACE, /* u8 if_bDescriptorType; */ | |
193 | 0x01, /* u8 if_bInterfaceNumber; */ | |
194 | 0x02, /* u8 if_bAlternateSetting; */ | |
195 | 0x02, /* u8 if_bNumEndpoints; */ | |
196 | 0xe0, /* u8 if_bInterfaceClass; Wireless */ | |
197 | 0x01, /* u8 if_bInterfaceSubClass; Radio Frequency */ | |
198 | 0x01, /* u8 if_bInterfaceProtocol; Bluetooth */ | |
199 | 0x00, /* u8 if_iInterface; */ | |
200 | ||
201 | /* endpoint one */ | |
202 | 0x07, /* u8 ep_bLength; */ | |
203 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
204 | USB_DIR_OUT | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
205 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
206 | 0x11, 0x00, /* u16 ep_wMaxPacketSize; */ | |
207 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
208 | ||
209 | /* endpoint two */ | |
210 | 0x07, /* u8 ep_bLength; */ | |
211 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
212 | USB_DIR_IN | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
213 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
214 | 0x11, 0x00, /* u16 ep_wMaxPacketSize; */ | |
215 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
216 | ||
217 | /* interface two setting four */ | |
218 | 0x09, /* u8 if_bLength; */ | |
219 | USB_DT_INTERFACE, /* u8 if_bDescriptorType; */ | |
220 | 0x01, /* u8 if_bInterfaceNumber; */ | |
221 | 0x03, /* u8 if_bAlternateSetting; */ | |
222 | 0x02, /* u8 if_bNumEndpoints; */ | |
223 | 0xe0, /* u8 if_bInterfaceClass; Wireless */ | |
224 | 0x01, /* u8 if_bInterfaceSubClass; Radio Frequency */ | |
225 | 0x01, /* u8 if_bInterfaceProtocol; Bluetooth */ | |
226 | 0x00, /* u8 if_iInterface; */ | |
227 | ||
228 | /* endpoint one */ | |
229 | 0x07, /* u8 ep_bLength; */ | |
230 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
231 | USB_DIR_OUT | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
232 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
233 | 0x19, 0x00, /* u16 ep_wMaxPacketSize; */ | |
234 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
235 | ||
236 | /* endpoint two */ | |
237 | 0x07, /* u8 ep_bLength; */ | |
238 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
239 | USB_DIR_IN | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
240 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
241 | 0x19, 0x00, /* u16 ep_wMaxPacketSize; */ | |
242 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
243 | ||
244 | /* interface two setting five */ | |
245 | 0x09, /* u8 if_bLength; */ | |
246 | USB_DT_INTERFACE, /* u8 if_bDescriptorType; */ | |
247 | 0x01, /* u8 if_bInterfaceNumber; */ | |
248 | 0x04, /* u8 if_bAlternateSetting; */ | |
249 | 0x02, /* u8 if_bNumEndpoints; */ | |
250 | 0xe0, /* u8 if_bInterfaceClass; Wireless */ | |
251 | 0x01, /* u8 if_bInterfaceSubClass; Radio Frequency */ | |
252 | 0x01, /* u8 if_bInterfaceProtocol; Bluetooth */ | |
253 | 0x00, /* u8 if_iInterface; */ | |
254 | ||
255 | /* endpoint one */ | |
256 | 0x07, /* u8 ep_bLength; */ | |
257 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
258 | USB_DIR_OUT | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
259 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
260 | 0x21, 0x00, /* u16 ep_wMaxPacketSize; */ | |
261 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
262 | ||
263 | /* endpoint two */ | |
264 | 0x07, /* u8 ep_bLength; */ | |
265 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
266 | USB_DIR_IN | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
267 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
268 | 0x21, 0x00, /* u16 ep_wMaxPacketSize; */ | |
269 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
270 | ||
271 | /* interface two setting six */ | |
272 | 0x09, /* u8 if_bLength; */ | |
273 | USB_DT_INTERFACE, /* u8 if_bDescriptorType; */ | |
274 | 0x01, /* u8 if_bInterfaceNumber; */ | |
275 | 0x05, /* u8 if_bAlternateSetting; */ | |
276 | 0x02, /* u8 if_bNumEndpoints; */ | |
277 | 0xe0, /* u8 if_bInterfaceClass; Wireless */ | |
278 | 0x01, /* u8 if_bInterfaceSubClass; Radio Frequency */ | |
279 | 0x01, /* u8 if_bInterfaceProtocol; Bluetooth */ | |
280 | 0x00, /* u8 if_iInterface; */ | |
281 | ||
282 | /* endpoint one */ | |
283 | 0x07, /* u8 ep_bLength; */ | |
284 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
285 | USB_DIR_OUT | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
286 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
287 | 0x31, 0x00, /* u16 ep_wMaxPacketSize; */ | |
288 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
289 | ||
290 | /* endpoint two */ | |
291 | 0x07, /* u8 ep_bLength; */ | |
292 | USB_DT_ENDPOINT, /* u8 ep_bDescriptorType; */ | |
293 | USB_DIR_IN | USB_SCO_EP, /* u8 ep_bEndpointAddress; */ | |
294 | 0x01, /* u8 ep_bmAttributes; Isochronous */ | |
295 | 0x31, 0x00, /* u16 ep_wMaxPacketSize; */ | |
296 | 0x01, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ | |
297 | ||
298 | /* If implemented, the DFU interface descriptor goes here with no | |
299 | * endpoints or alternative settings. */ | |
300 | }; | |
301 | ||
302 | static void usb_bt_fifo_reset(struct usb_hci_in_fifo_s *fifo) | |
303 | { | |
304 | fifo->dstart = 0; | |
305 | fifo->dlen = 0; | |
306 | fifo->dsize = DFIFO_LEN_MASK + 1; | |
307 | fifo->start = 0; | |
308 | fifo->len = 0; | |
309 | } | |
310 | ||
311 | static void usb_bt_fifo_enqueue(struct usb_hci_in_fifo_s *fifo, | |
312 | const uint8_t *data, int len) | |
313 | { | |
314 | int off = fifo->dstart + fifo->dlen; | |
315 | uint8_t *buf; | |
316 | ||
317 | fifo->dlen += len; | |
318 | if (off <= DFIFO_LEN_MASK) { | |
319 | if (off + len > DFIFO_LEN_MASK + 1 && | |
320 | (fifo->dsize = off + len) > (DFIFO_LEN_MASK + 1) * 2) { | |
321 | fprintf(stderr, "%s: can't alloc %i bytes\n", __FUNCTION__, len); | |
322 | exit(-1); | |
323 | } | |
324 | buf = fifo->data + off; | |
325 | } else { | |
326 | if (fifo->dlen > fifo->dsize) { | |
327 | fprintf(stderr, "%s: can't alloc %i bytes\n", __FUNCTION__, len); | |
328 | exit(-1); | |
329 | } | |
330 | buf = fifo->data + off - fifo->dsize; | |
331 | } | |
332 | ||
333 | off = (fifo->start + fifo->len ++) & CFIFO_LEN_MASK; | |
334 | fifo->fifo[off].data = memcpy(buf, data, len); | |
335 | fifo->fifo[off].len = len; | |
336 | } | |
337 | ||
338 | static inline int usb_bt_fifo_dequeue(struct usb_hci_in_fifo_s *fifo, | |
339 | USBPacket *p) | |
340 | { | |
341 | int len; | |
342 | ||
343 | if (likely(!fifo->len)) | |
344 | return USB_RET_STALL; | |
345 | ||
346 | len = MIN(p->len, fifo->fifo[fifo->start].len); | |
347 | memcpy(p->data, fifo->fifo[fifo->start].data, len); | |
348 | if (len == p->len) { | |
349 | fifo->fifo[fifo->start].len -= len; | |
350 | fifo->fifo[fifo->start].data += len; | |
351 | } else { | |
352 | fifo->start ++; | |
353 | fifo->start &= CFIFO_LEN_MASK; | |
354 | fifo->len --; | |
355 | } | |
356 | ||
357 | fifo->dstart += len; | |
358 | fifo->dlen -= len; | |
359 | if (fifo->dstart >= fifo->dsize) { | |
360 | fifo->dstart = 0; | |
361 | fifo->dsize = DFIFO_LEN_MASK + 1; | |
362 | } | |
363 | ||
364 | return len; | |
365 | } | |
366 | ||
367 | static void inline usb_bt_fifo_out_enqueue(struct USBBtState *s, | |
368 | struct usb_hci_out_fifo_s *fifo, | |
369 | void (*send)(struct HCIInfo *, const uint8_t *, int), | |
370 | int (*complete)(const uint8_t *, int), | |
371 | const uint8_t *data, int len) | |
372 | { | |
373 | if (fifo->len) { | |
374 | memcpy(fifo->data + fifo->len, data, len); | |
375 | fifo->len += len; | |
376 | if (complete(fifo->data, fifo->len)) { | |
377 | send(s->hci, fifo->data, fifo->len); | |
378 | fifo->len = 0; | |
379 | } | |
380 | } else if (complete(data, len)) | |
381 | send(s->hci, data, len); | |
382 | else { | |
383 | memcpy(fifo->data, data, len); | |
384 | fifo->len = len; | |
385 | } | |
386 | ||
387 | /* TODO: do we need to loop? */ | |
388 | } | |
389 | ||
390 | static int usb_bt_hci_cmd_complete(const uint8_t *data, int len) | |
391 | { | |
392 | len -= HCI_COMMAND_HDR_SIZE; | |
393 | return len >= 0 && | |
394 | len >= ((struct hci_command_hdr *) data)->plen; | |
395 | } | |
396 | ||
397 | static int usb_bt_hci_acl_complete(const uint8_t *data, int len) | |
398 | { | |
399 | len -= HCI_ACL_HDR_SIZE; | |
400 | return len >= 0 && | |
401 | len >= le16_to_cpu(((struct hci_acl_hdr *) data)->dlen); | |
402 | } | |
403 | ||
404 | static int usb_bt_hci_sco_complete(const uint8_t *data, int len) | |
405 | { | |
406 | len -= HCI_SCO_HDR_SIZE; | |
407 | return len >= 0 && | |
408 | len >= ((struct hci_sco_hdr *) data)->dlen; | |
409 | } | |
410 | ||
411 | static void usb_bt_handle_reset(USBDevice *dev) | |
412 | { | |
413 | struct USBBtState *s = (struct USBBtState *) dev->opaque; | |
414 | ||
415 | usb_bt_fifo_reset(&s->evt); | |
416 | usb_bt_fifo_reset(&s->acl); | |
417 | usb_bt_fifo_reset(&s->sco); | |
418 | s->outcmd.len = 0; | |
419 | s->outacl.len = 0; | |
420 | s->outsco.len = 0; | |
421 | s->altsetting = 0; | |
422 | } | |
423 | ||
424 | static int usb_bt_handle_control(USBDevice *dev, int request, int value, | |
425 | int index, int length, uint8_t *data) | |
426 | { | |
427 | struct USBBtState *s = (struct USBBtState *) dev->opaque; | |
428 | int ret = 0; | |
429 | ||
430 | switch (request) { | |
431 | case DeviceRequest | USB_REQ_GET_STATUS: | |
432 | case InterfaceRequest | USB_REQ_GET_STATUS: | |
433 | case EndpointRequest | USB_REQ_GET_STATUS: | |
434 | data[0] = (1 << USB_DEVICE_SELF_POWERED) | | |
435 | (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP); | |
436 | data[1] = 0x00; | |
437 | ret = 2; | |
438 | break; | |
439 | case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: | |
440 | case InterfaceOutRequest | USB_REQ_CLEAR_FEATURE: | |
441 | case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: | |
442 | if (value == USB_DEVICE_REMOTE_WAKEUP) { | |
443 | dev->remote_wakeup = 0; | |
444 | } else { | |
445 | goto fail; | |
446 | } | |
447 | ret = 0; | |
448 | break; | |
449 | case DeviceOutRequest | USB_REQ_SET_FEATURE: | |
450 | case InterfaceOutRequest | USB_REQ_SET_FEATURE: | |
451 | case EndpointOutRequest | USB_REQ_SET_FEATURE: | |
452 | if (value == USB_DEVICE_REMOTE_WAKEUP) { | |
453 | dev->remote_wakeup = 1; | |
454 | } else { | |
455 | goto fail; | |
456 | } | |
457 | ret = 0; | |
458 | break; | |
459 | case DeviceOutRequest | USB_REQ_SET_ADDRESS: | |
460 | dev->addr = value; | |
461 | ret = 0; | |
462 | break; | |
463 | case DeviceRequest | USB_REQ_GET_DESCRIPTOR: | |
464 | switch (value >> 8) { | |
465 | case USB_DT_DEVICE: | |
466 | ret = sizeof(qemu_bt_dev_descriptor); | |
467 | memcpy(data, qemu_bt_dev_descriptor, ret); | |
468 | break; | |
469 | case USB_DT_CONFIG: | |
470 | ret = sizeof(qemu_bt_config_descriptor); | |
471 | memcpy(data, qemu_bt_config_descriptor, ret); | |
472 | break; | |
473 | case USB_DT_STRING: | |
474 | switch(value & 0xff) { | |
475 | case 0: | |
476 | /* language ids */ | |
477 | data[0] = 4; | |
478 | data[1] = 3; | |
479 | data[2] = 0x09; | |
480 | data[3] = 0x04; | |
481 | ret = 4; | |
482 | break; | |
483 | default: | |
484 | goto fail; | |
485 | } | |
486 | break; | |
487 | default: | |
488 | goto fail; | |
489 | } | |
490 | break; | |
491 | case DeviceRequest | USB_REQ_GET_CONFIGURATION: | |
492 | data[0] = qemu_bt_config_descriptor[0x5]; | |
493 | ret = 1; | |
494 | s->config = 0; | |
495 | break; | |
496 | case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: | |
497 | ret = 0; | |
498 | if (value != qemu_bt_config_descriptor[0x5] && value != 0) { | |
499 | printf("%s: Wrong SET_CONFIGURATION request (%i)\n", | |
500 | __FUNCTION__, value); | |
501 | goto fail; | |
502 | } | |
503 | s->config = 1; | |
504 | usb_bt_fifo_reset(&s->evt); | |
505 | usb_bt_fifo_reset(&s->acl); | |
506 | usb_bt_fifo_reset(&s->sco); | |
507 | break; | |
508 | case InterfaceRequest | USB_REQ_GET_INTERFACE: | |
509 | if (value != 0 || (index & ~1) || length != 1) | |
510 | goto fail; | |
511 | if (index == 1) | |
512 | data[0] = s->altsetting; | |
513 | else | |
514 | data[0] = 0; | |
515 | ret = 1; | |
516 | break; | |
517 | case InterfaceOutRequest | USB_REQ_SET_INTERFACE: | |
518 | if ((index & ~1) || length != 0 || | |
519 | (index == 1 && (value < 0 || value > 4)) || | |
520 | (index == 0 && value != 0)) { | |
521 | printf("%s: Wrong SET_INTERFACE request (%i, %i)\n", | |
522 | __FUNCTION__, index, value); | |
523 | goto fail; | |
524 | } | |
525 | s->altsetting = value; | |
526 | ret = 0; | |
527 | break; | |
528 | case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_DEVICE) << 8): | |
529 | if (s->config) | |
530 | usb_bt_fifo_out_enqueue(s, &s->outcmd, s->hci->cmd_send, | |
531 | usb_bt_hci_cmd_complete, data, length); | |
532 | break; | |
533 | default: | |
534 | fail: | |
535 | ret = USB_RET_STALL; | |
536 | break; | |
537 | } | |
538 | return ret; | |
539 | } | |
540 | ||
541 | static int usb_bt_handle_data(USBDevice *dev, USBPacket *p) | |
542 | { | |
543 | struct USBBtState *s = (struct USBBtState *) dev->opaque; | |
544 | int ret = 0; | |
545 | ||
546 | if (!s->config) | |
547 | goto fail; | |
548 | ||
549 | switch (p->pid) { | |
550 | case USB_TOKEN_IN: | |
551 | switch (p->devep & 0xf) { | |
552 | case USB_EVT_EP: | |
553 | ret = usb_bt_fifo_dequeue(&s->evt, p); | |
554 | break; | |
555 | ||
556 | case USB_ACL_EP: | |
557 | ret = usb_bt_fifo_dequeue(&s->acl, p); | |
558 | break; | |
559 | ||
560 | case USB_SCO_EP: | |
561 | ret = usb_bt_fifo_dequeue(&s->sco, p); | |
562 | break; | |
563 | ||
564 | default: | |
565 | goto fail; | |
566 | } | |
567 | break; | |
568 | ||
569 | case USB_TOKEN_OUT: | |
570 | switch (p->devep & 0xf) { | |
571 | case USB_ACL_EP: | |
572 | usb_bt_fifo_out_enqueue(s, &s->outacl, s->hci->acl_send, | |
573 | usb_bt_hci_acl_complete, p->data, p->len); | |
574 | break; | |
575 | ||
576 | case USB_SCO_EP: | |
577 | usb_bt_fifo_out_enqueue(s, &s->outsco, s->hci->sco_send, | |
578 | usb_bt_hci_sco_complete, p->data, p->len); | |
579 | break; | |
580 | ||
581 | default: | |
582 | goto fail; | |
583 | } | |
584 | break; | |
585 | ||
586 | default: | |
587 | fail: | |
588 | ret = USB_RET_STALL; | |
589 | break; | |
590 | } | |
591 | ||
592 | return ret; | |
593 | } | |
594 | ||
595 | static void usb_bt_out_hci_packet_event(void *opaque, | |
596 | const uint8_t *data, int len) | |
597 | { | |
598 | struct USBBtState *s = (struct USBBtState *) opaque; | |
599 | ||
600 | usb_bt_fifo_enqueue(&s->evt, data, len); | |
601 | } | |
602 | ||
603 | static void usb_bt_out_hci_packet_acl(void *opaque, | |
604 | const uint8_t *data, int len) | |
605 | { | |
606 | struct USBBtState *s = (struct USBBtState *) opaque; | |
607 | ||
608 | usb_bt_fifo_enqueue(&s->acl, data, len); | |
609 | } | |
610 | ||
611 | static void usb_bt_handle_destroy(USBDevice *dev) | |
612 | { | |
613 | struct USBBtState *s = (struct USBBtState *) dev->opaque; | |
614 | ||
615 | s->hci->opaque = 0; | |
616 | s->hci->evt_recv = 0; | |
617 | s->hci->acl_recv = 0; | |
618 | qemu_free(s); | |
619 | } | |
620 | ||
621 | USBDevice *usb_bt_init(HCIInfo *hci) | |
622 | { | |
623 | struct USBBtState *s; | |
624 | ||
2d564691 AZ |
625 | if (!hci) |
626 | return NULL; | |
e6a6d5ab AZ |
627 | s = qemu_mallocz(sizeof(struct USBBtState)); |
628 | if (!s) | |
629 | return NULL; | |
630 | s->dev.opaque = s; | |
631 | s->dev.speed = USB_SPEED_HIGH; | |
632 | s->dev.handle_packet = usb_generic_handle_packet; | |
633 | pstrcpy(s->dev.devname, sizeof(s->dev.devname), "QEMU BT dongle"); | |
634 | ||
635 | s->dev.handle_reset = usb_bt_handle_reset; | |
636 | s->dev.handle_control = usb_bt_handle_control; | |
637 | s->dev.handle_data = usb_bt_handle_data; | |
638 | s->dev.handle_destroy = usb_bt_handle_destroy; | |
639 | ||
640 | s->hci = hci; | |
641 | s->hci->opaque = s; | |
642 | s->hci->evt_recv = usb_bt_out_hci_packet_event; | |
643 | s->hci->acl_recv = usb_bt_out_hci_packet_acl; | |
644 | ||
645 | usb_bt_handle_reset(&s->dev); | |
646 | ||
647 | return &s->dev; | |
648 | } |