]>
Commit | Line | Data |
---|---|---|
418026ca FZ |
1 | /* |
2 | * VFIO utility | |
3 | * | |
4 | * Copyright 2016 - 2018 Red Hat, Inc. | |
5 | * | |
6 | * Authors: | |
7 | * Fam Zheng <[email protected]> | |
8 | * | |
9 | * This work is licensed under the terms of the GNU GPL, version 2 or later. | |
10 | * See the COPYING file in the top-level directory. | |
11 | */ | |
12 | ||
13 | #include "qemu/osdep.h" | |
14 | #include <sys/ioctl.h> | |
15 | #include <linux/vfio.h> | |
16 | #include "qapi/error.h" | |
17 | #include "exec/ramlist.h" | |
18 | #include "exec/cpu-common.h" | |
19 | #include "trace.h" | |
418026ca FZ |
20 | #include "qemu/error-report.h" |
21 | #include "standard-headers/linux/pci_regs.h" | |
22 | #include "qemu/event_notifier.h" | |
23 | #include "qemu/vfio-helpers.h" | |
24 | #include "trace.h" | |
25 | ||
26 | #define QEMU_VFIO_DEBUG 0 | |
27 | ||
28 | #define QEMU_VFIO_IOVA_MIN 0x10000ULL | |
29 | /* XXX: Once VFIO exposes the iova bit width in the IOMMU capability interface, | |
30 | * we can use a runtime limit; alternatively it's also possible to do platform | |
31 | * specific detection by reading sysfs entries. Until then, 39 is a safe bet. | |
32 | **/ | |
33 | #define QEMU_VFIO_IOVA_MAX (1ULL << 39) | |
34 | ||
35 | typedef struct { | |
36 | /* Page aligned addr. */ | |
37 | void *host; | |
38 | size_t size; | |
39 | uint64_t iova; | |
40 | } IOVAMapping; | |
41 | ||
42 | struct QEMUVFIOState { | |
43 | QemuMutex lock; | |
44 | ||
45 | /* These fields are protected by BQL */ | |
46 | int container; | |
47 | int group; | |
48 | int device; | |
49 | RAMBlockNotifier ram_notifier; | |
50 | struct vfio_region_info config_region_info, bar_region_info[6]; | |
51 | ||
52 | /* These fields are protected by @lock */ | |
53 | /* VFIO's IO virtual address space is managed by splitting into a few | |
54 | * sections: | |
55 | * | |
56 | * --------------- <= 0 | |
57 | * |xxxxxxxxxxxxx| | |
58 | * |-------------| <= QEMU_VFIO_IOVA_MIN | |
59 | * | | | |
60 | * | Fixed | | |
61 | * | | | |
62 | * |-------------| <= low_water_mark | |
63 | * | | | |
64 | * | Free | | |
65 | * | | | |
66 | * |-------------| <= high_water_mark | |
67 | * | | | |
68 | * | Temp | | |
69 | * | | | |
70 | * |-------------| <= QEMU_VFIO_IOVA_MAX | |
71 | * |xxxxxxxxxxxxx| | |
72 | * |xxxxxxxxxxxxx| | |
73 | * --------------- | |
74 | * | |
75 | * - Addresses lower than QEMU_VFIO_IOVA_MIN are reserved as invalid; | |
76 | * | |
77 | * - Fixed mappings of HVAs are assigned "low" IOVAs in the range of | |
78 | * [QEMU_VFIO_IOVA_MIN, low_water_mark). Once allocated they will not be | |
79 | * reclaimed - low_water_mark never shrinks; | |
80 | * | |
81 | * - IOVAs in range [low_water_mark, high_water_mark) are free; | |
82 | * | |
83 | * - IOVAs in range [high_water_mark, QEMU_VFIO_IOVA_MAX) are volatile | |
84 | * mappings. At each qemu_vfio_dma_reset_temporary() call, the whole area | |
85 | * is recycled. The caller should make sure I/O's depending on these | |
86 | * mappings are completed before calling. | |
87 | **/ | |
88 | uint64_t low_water_mark; | |
89 | uint64_t high_water_mark; | |
90 | IOVAMapping *mappings; | |
91 | int nr_mappings; | |
92 | }; | |
93 | ||
94 | /** | |
95 | * Find group file by PCI device address as specified @device, and return the | |
96 | * path. The returned string is owned by caller and should be g_free'ed later. | |
97 | */ | |
98 | static char *sysfs_find_group_file(const char *device, Error **errp) | |
99 | { | |
100 | char *sysfs_link; | |
101 | char *sysfs_group; | |
102 | char *p; | |
103 | char *path = NULL; | |
104 | ||
105 | sysfs_link = g_strdup_printf("/sys/bus/pci/devices/%s/iommu_group", device); | |
78d8c99e | 106 | sysfs_group = g_malloc0(PATH_MAX); |
418026ca FZ |
107 | if (readlink(sysfs_link, sysfs_group, PATH_MAX - 1) == -1) { |
108 | error_setg_errno(errp, errno, "Failed to find iommu group sysfs path"); | |
109 | goto out; | |
110 | } | |
111 | p = strrchr(sysfs_group, '/'); | |
112 | if (!p) { | |
113 | error_setg(errp, "Failed to find iommu group number"); | |
114 | goto out; | |
115 | } | |
116 | ||
117 | path = g_strdup_printf("/dev/vfio/%s", p + 1); | |
118 | out: | |
119 | g_free(sysfs_link); | |
120 | g_free(sysfs_group); | |
121 | return path; | |
122 | } | |
123 | ||
124 | static inline void assert_bar_index_valid(QEMUVFIOState *s, int index) | |
125 | { | |
126 | assert(index >= 0 && index < ARRAY_SIZE(s->bar_region_info)); | |
127 | } | |
128 | ||
129 | static int qemu_vfio_pci_init_bar(QEMUVFIOState *s, int index, Error **errp) | |
130 | { | |
131 | assert_bar_index_valid(s, index); | |
132 | s->bar_region_info[index] = (struct vfio_region_info) { | |
133 | .index = VFIO_PCI_BAR0_REGION_INDEX + index, | |
134 | .argsz = sizeof(struct vfio_region_info), | |
135 | }; | |
136 | if (ioctl(s->device, VFIO_DEVICE_GET_REGION_INFO, &s->bar_region_info[index])) { | |
137 | error_setg_errno(errp, errno, "Failed to get BAR region info"); | |
138 | return -errno; | |
139 | } | |
140 | ||
141 | return 0; | |
142 | } | |
143 | ||
144 | /** | |
145 | * Map a PCI bar area. | |
146 | */ | |
147 | void *qemu_vfio_pci_map_bar(QEMUVFIOState *s, int index, | |
148 | uint64_t offset, uint64_t size, | |
149 | Error **errp) | |
150 | { | |
151 | void *p; | |
152 | assert_bar_index_valid(s, index); | |
153 | p = mmap(NULL, MIN(size, s->bar_region_info[index].size - offset), | |
154 | PROT_READ | PROT_WRITE, MAP_SHARED, | |
155 | s->device, s->bar_region_info[index].offset + offset); | |
156 | if (p == MAP_FAILED) { | |
157 | error_setg_errno(errp, errno, "Failed to map BAR region"); | |
158 | p = NULL; | |
159 | } | |
160 | return p; | |
161 | } | |
162 | ||
163 | /** | |
164 | * Unmap a PCI bar area. | |
165 | */ | |
166 | void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar, | |
167 | uint64_t offset, uint64_t size) | |
168 | { | |
169 | if (bar) { | |
170 | munmap(bar, MIN(size, s->bar_region_info[index].size - offset)); | |
171 | } | |
172 | } | |
173 | ||
174 | /** | |
175 | * Initialize device IRQ with @irq_type and and register an event notifier. | |
176 | */ | |
177 | int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e, | |
178 | int irq_type, Error **errp) | |
179 | { | |
180 | int r; | |
181 | struct vfio_irq_set *irq_set; | |
182 | size_t irq_set_size; | |
183 | struct vfio_irq_info irq_info = { .argsz = sizeof(irq_info) }; | |
184 | ||
185 | irq_info.index = irq_type; | |
186 | if (ioctl(s->device, VFIO_DEVICE_GET_IRQ_INFO, &irq_info)) { | |
187 | error_setg_errno(errp, errno, "Failed to get device interrupt info"); | |
188 | return -errno; | |
189 | } | |
190 | if (!(irq_info.flags & VFIO_IRQ_INFO_EVENTFD)) { | |
191 | error_setg(errp, "Device interrupt doesn't support eventfd"); | |
192 | return -EINVAL; | |
193 | } | |
194 | ||
195 | irq_set_size = sizeof(*irq_set) + sizeof(int); | |
196 | irq_set = g_malloc0(irq_set_size); | |
197 | ||
198 | /* Get to a known IRQ state */ | |
199 | *irq_set = (struct vfio_irq_set) { | |
200 | .argsz = irq_set_size, | |
201 | .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER, | |
202 | .index = irq_info.index, | |
203 | .start = 0, | |
204 | .count = 1, | |
205 | }; | |
206 | ||
207 | *(int *)&irq_set->data = event_notifier_get_fd(e); | |
208 | r = ioctl(s->device, VFIO_DEVICE_SET_IRQS, irq_set); | |
209 | g_free(irq_set); | |
210 | if (r) { | |
211 | error_setg_errno(errp, errno, "Failed to setup device interrupt"); | |
212 | return -errno; | |
213 | } | |
214 | return 0; | |
215 | } | |
216 | ||
217 | static int qemu_vfio_pci_read_config(QEMUVFIOState *s, void *buf, | |
218 | int size, int ofs) | |
219 | { | |
220 | int ret; | |
221 | ||
222 | do { | |
223 | ret = pread(s->device, buf, size, s->config_region_info.offset + ofs); | |
224 | } while (ret == -1 && errno == EINTR); | |
225 | return ret == size ? 0 : -errno; | |
226 | } | |
227 | ||
228 | static int qemu_vfio_pci_write_config(QEMUVFIOState *s, void *buf, int size, int ofs) | |
229 | { | |
230 | int ret; | |
231 | ||
232 | do { | |
233 | ret = pwrite(s->device, buf, size, s->config_region_info.offset + ofs); | |
234 | } while (ret == -1 && errno == EINTR); | |
235 | return ret == size ? 0 : -errno; | |
236 | } | |
237 | ||
238 | static int qemu_vfio_init_pci(QEMUVFIOState *s, const char *device, | |
239 | Error **errp) | |
240 | { | |
241 | int ret; | |
242 | int i; | |
243 | uint16_t pci_cmd; | |
244 | struct vfio_group_status group_status = { .argsz = sizeof(group_status) }; | |
245 | struct vfio_iommu_type1_info iommu_info = { .argsz = sizeof(iommu_info) }; | |
246 | struct vfio_device_info device_info = { .argsz = sizeof(device_info) }; | |
247 | char *group_file = NULL; | |
248 | ||
249 | /* Create a new container */ | |
250 | s->container = open("/dev/vfio/vfio", O_RDWR); | |
251 | ||
252 | if (s->container == -1) { | |
253 | error_setg_errno(errp, errno, "Failed to open /dev/vfio/vfio"); | |
254 | return -errno; | |
255 | } | |
256 | if (ioctl(s->container, VFIO_GET_API_VERSION) != VFIO_API_VERSION) { | |
257 | error_setg(errp, "Invalid VFIO version"); | |
258 | ret = -EINVAL; | |
259 | goto fail_container; | |
260 | } | |
261 | ||
262 | if (!ioctl(s->container, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) { | |
263 | error_setg_errno(errp, errno, "VFIO IOMMU check failed"); | |
264 | ret = -EINVAL; | |
265 | goto fail_container; | |
266 | } | |
267 | ||
268 | /* Open the group */ | |
269 | group_file = sysfs_find_group_file(device, errp); | |
270 | if (!group_file) { | |
271 | ret = -EINVAL; | |
272 | goto fail_container; | |
273 | } | |
274 | ||
275 | s->group = open(group_file, O_RDWR); | |
276 | if (s->group == -1) { | |
277 | error_setg_errno(errp, errno, "Failed to open VFIO group file: %s", | |
278 | group_file); | |
279 | g_free(group_file); | |
280 | ret = -errno; | |
281 | goto fail_container; | |
282 | } | |
283 | g_free(group_file); | |
284 | ||
285 | /* Test the group is viable and available */ | |
286 | if (ioctl(s->group, VFIO_GROUP_GET_STATUS, &group_status)) { | |
287 | error_setg_errno(errp, errno, "Failed to get VFIO group status"); | |
288 | ret = -errno; | |
289 | goto fail; | |
290 | } | |
291 | ||
292 | if (!(group_status.flags & VFIO_GROUP_FLAGS_VIABLE)) { | |
293 | error_setg(errp, "VFIO group is not viable"); | |
294 | ret = -EINVAL; | |
295 | goto fail; | |
296 | } | |
297 | ||
298 | /* Add the group to the container */ | |
299 | if (ioctl(s->group, VFIO_GROUP_SET_CONTAINER, &s->container)) { | |
300 | error_setg_errno(errp, errno, "Failed to add group to VFIO container"); | |
301 | ret = -errno; | |
302 | goto fail; | |
303 | } | |
304 | ||
305 | /* Enable the IOMMU model we want */ | |
306 | if (ioctl(s->container, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU)) { | |
307 | error_setg_errno(errp, errno, "Failed to set VFIO IOMMU type"); | |
308 | ret = -errno; | |
309 | goto fail; | |
310 | } | |
311 | ||
312 | /* Get additional IOMMU info */ | |
313 | if (ioctl(s->container, VFIO_IOMMU_GET_INFO, &iommu_info)) { | |
314 | error_setg_errno(errp, errno, "Failed to get IOMMU info"); | |
315 | ret = -errno; | |
316 | goto fail; | |
317 | } | |
318 | ||
319 | s->device = ioctl(s->group, VFIO_GROUP_GET_DEVICE_FD, device); | |
320 | ||
321 | if (s->device < 0) { | |
322 | error_setg_errno(errp, errno, "Failed to get device fd"); | |
323 | ret = -errno; | |
324 | goto fail; | |
325 | } | |
326 | ||
327 | /* Test and setup the device */ | |
328 | if (ioctl(s->device, VFIO_DEVICE_GET_INFO, &device_info)) { | |
329 | error_setg_errno(errp, errno, "Failed to get device info"); | |
330 | ret = -errno; | |
331 | goto fail; | |
332 | } | |
333 | ||
334 | if (device_info.num_regions < VFIO_PCI_CONFIG_REGION_INDEX) { | |
335 | error_setg(errp, "Invalid device regions"); | |
336 | ret = -EINVAL; | |
337 | goto fail; | |
338 | } | |
339 | ||
340 | s->config_region_info = (struct vfio_region_info) { | |
341 | .index = VFIO_PCI_CONFIG_REGION_INDEX, | |
342 | .argsz = sizeof(struct vfio_region_info), | |
343 | }; | |
344 | if (ioctl(s->device, VFIO_DEVICE_GET_REGION_INFO, &s->config_region_info)) { | |
345 | error_setg_errno(errp, errno, "Failed to get config region info"); | |
346 | ret = -errno; | |
347 | goto fail; | |
348 | } | |
349 | ||
9e722ebc | 350 | for (i = 0; i < ARRAY_SIZE(s->bar_region_info); i++) { |
418026ca FZ |
351 | ret = qemu_vfio_pci_init_bar(s, i, errp); |
352 | if (ret) { | |
353 | goto fail; | |
354 | } | |
355 | } | |
356 | ||
357 | /* Enable bus master */ | |
358 | ret = qemu_vfio_pci_read_config(s, &pci_cmd, sizeof(pci_cmd), PCI_COMMAND); | |
359 | if (ret) { | |
360 | goto fail; | |
361 | } | |
362 | pci_cmd |= PCI_COMMAND_MASTER; | |
363 | ret = qemu_vfio_pci_write_config(s, &pci_cmd, sizeof(pci_cmd), PCI_COMMAND); | |
364 | if (ret) { | |
365 | goto fail; | |
366 | } | |
367 | return 0; | |
368 | fail: | |
369 | close(s->group); | |
370 | fail_container: | |
371 | close(s->container); | |
372 | return ret; | |
373 | } | |
374 | ||
375 | static void qemu_vfio_ram_block_added(RAMBlockNotifier *n, | |
376 | void *host, size_t size) | |
377 | { | |
378 | QEMUVFIOState *s = container_of(n, QEMUVFIOState, ram_notifier); | |
379 | trace_qemu_vfio_ram_block_added(s, host, size); | |
380 | qemu_vfio_dma_map(s, host, size, false, NULL); | |
381 | } | |
382 | ||
383 | static void qemu_vfio_ram_block_removed(RAMBlockNotifier *n, | |
384 | void *host, size_t size) | |
385 | { | |
386 | QEMUVFIOState *s = container_of(n, QEMUVFIOState, ram_notifier); | |
387 | if (host) { | |
388 | trace_qemu_vfio_ram_block_removed(s, host, size); | |
389 | qemu_vfio_dma_unmap(s, host); | |
390 | } | |
391 | } | |
392 | ||
754cb9c0 | 393 | static int qemu_vfio_init_ramblock(RAMBlock *rb, void *opaque) |
418026ca | 394 | { |
754cb9c0 YK |
395 | void *host_addr = qemu_ram_get_host_addr(rb); |
396 | ram_addr_t length = qemu_ram_get_used_length(rb); | |
418026ca FZ |
397 | int ret; |
398 | QEMUVFIOState *s = opaque; | |
399 | ||
400 | if (!host_addr) { | |
401 | return 0; | |
402 | } | |
403 | ret = qemu_vfio_dma_map(s, host_addr, length, false, NULL); | |
404 | if (ret) { | |
405 | fprintf(stderr, "qemu_vfio_init_ramblock: failed %p %" PRId64 "\n", | |
406 | host_addr, (uint64_t)length); | |
407 | } | |
408 | return 0; | |
409 | } | |
410 | ||
411 | static void qemu_vfio_open_common(QEMUVFIOState *s) | |
412 | { | |
549b50a3 | 413 | qemu_mutex_init(&s->lock); |
418026ca FZ |
414 | s->ram_notifier.ram_block_added = qemu_vfio_ram_block_added; |
415 | s->ram_notifier.ram_block_removed = qemu_vfio_ram_block_removed; | |
416 | ram_block_notifier_add(&s->ram_notifier); | |
417 | s->low_water_mark = QEMU_VFIO_IOVA_MIN; | |
418 | s->high_water_mark = QEMU_VFIO_IOVA_MAX; | |
419 | qemu_ram_foreach_block(qemu_vfio_init_ramblock, s); | |
418026ca FZ |
420 | } |
421 | ||
422 | /** | |
423 | * Open a PCI device, e.g. "0000:00:01.0". | |
424 | */ | |
425 | QEMUVFIOState *qemu_vfio_open_pci(const char *device, Error **errp) | |
426 | { | |
427 | int r; | |
428 | QEMUVFIOState *s = g_new0(QEMUVFIOState, 1); | |
429 | ||
430 | r = qemu_vfio_init_pci(s, device, errp); | |
431 | if (r) { | |
432 | g_free(s); | |
433 | return NULL; | |
434 | } | |
435 | qemu_vfio_open_common(s); | |
436 | return s; | |
437 | } | |
438 | ||
439 | static void qemu_vfio_dump_mapping(IOVAMapping *m) | |
440 | { | |
441 | if (QEMU_VFIO_DEBUG) { | |
442 | printf(" vfio mapping %p %" PRIx64 " to %" PRIx64 "\n", m->host, | |
443 | (uint64_t)m->size, (uint64_t)m->iova); | |
444 | } | |
445 | } | |
446 | ||
447 | static void qemu_vfio_dump_mappings(QEMUVFIOState *s) | |
448 | { | |
449 | int i; | |
450 | ||
451 | if (QEMU_VFIO_DEBUG) { | |
452 | printf("vfio mappings\n"); | |
453 | for (i = 0; i < s->nr_mappings; ++i) { | |
454 | qemu_vfio_dump_mapping(&s->mappings[i]); | |
455 | } | |
456 | } | |
457 | } | |
458 | ||
459 | /** | |
460 | * Find the mapping entry that contains [host, host + size) and set @index to | |
461 | * the position. If no entry contains it, @index is the position _after_ which | |
462 | * to insert the new mapping. IOW, it is the index of the largest element that | |
463 | * is smaller than @host, or -1 if no entry is. | |
464 | */ | |
465 | static IOVAMapping *qemu_vfio_find_mapping(QEMUVFIOState *s, void *host, | |
466 | int *index) | |
467 | { | |
468 | IOVAMapping *p = s->mappings; | |
469 | IOVAMapping *q = p ? p + s->nr_mappings - 1 : NULL; | |
470 | IOVAMapping *mid; | |
471 | trace_qemu_vfio_find_mapping(s, host); | |
472 | if (!p) { | |
473 | *index = -1; | |
474 | return NULL; | |
475 | } | |
476 | while (true) { | |
477 | mid = p + (q - p) / 2; | |
478 | if (mid == p) { | |
479 | break; | |
480 | } | |
481 | if (mid->host > host) { | |
482 | q = mid; | |
483 | } else if (mid->host < host) { | |
484 | p = mid; | |
485 | } else { | |
486 | break; | |
487 | } | |
488 | } | |
489 | if (mid->host > host) { | |
490 | mid--; | |
491 | } else if (mid < &s->mappings[s->nr_mappings - 1] | |
492 | && (mid + 1)->host <= host) { | |
493 | mid++; | |
494 | } | |
495 | *index = mid - &s->mappings[0]; | |
496 | if (mid >= &s->mappings[0] && | |
497 | mid->host <= host && mid->host + mid->size > host) { | |
498 | assert(mid < &s->mappings[s->nr_mappings]); | |
499 | return mid; | |
500 | } | |
501 | /* At this point *index + 1 is the right position to insert the new | |
502 | * mapping.*/ | |
503 | return NULL; | |
504 | } | |
505 | ||
506 | /** | |
507 | * Allocate IOVA and and create a new mapping record and insert it in @s. | |
508 | */ | |
509 | static IOVAMapping *qemu_vfio_add_mapping(QEMUVFIOState *s, | |
510 | void *host, size_t size, | |
511 | int index, uint64_t iova) | |
512 | { | |
513 | int shift; | |
514 | IOVAMapping m = {.host = host, .size = size, .iova = iova}; | |
515 | IOVAMapping *insert; | |
516 | ||
517 | assert(QEMU_IS_ALIGNED(size, getpagesize())); | |
518 | assert(QEMU_IS_ALIGNED(s->low_water_mark, getpagesize())); | |
519 | assert(QEMU_IS_ALIGNED(s->high_water_mark, getpagesize())); | |
520 | trace_qemu_vfio_new_mapping(s, host, size, index, iova); | |
521 | ||
522 | assert(index >= 0); | |
523 | s->nr_mappings++; | |
d29eb678 | 524 | s->mappings = g_renew(IOVAMapping, s->mappings, s->nr_mappings); |
418026ca FZ |
525 | insert = &s->mappings[index]; |
526 | shift = s->nr_mappings - index - 1; | |
527 | if (shift) { | |
528 | memmove(insert + 1, insert, shift * sizeof(s->mappings[0])); | |
529 | } | |
530 | *insert = m; | |
531 | return insert; | |
532 | } | |
533 | ||
534 | /* Do the DMA mapping with VFIO. */ | |
535 | static int qemu_vfio_do_mapping(QEMUVFIOState *s, void *host, size_t size, | |
536 | uint64_t iova) | |
537 | { | |
538 | struct vfio_iommu_type1_dma_map dma_map = { | |
539 | .argsz = sizeof(dma_map), | |
540 | .flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE, | |
541 | .iova = iova, | |
542 | .vaddr = (uintptr_t)host, | |
543 | .size = size, | |
544 | }; | |
545 | trace_qemu_vfio_do_mapping(s, host, size, iova); | |
546 | ||
547 | if (ioctl(s->container, VFIO_IOMMU_MAP_DMA, &dma_map)) { | |
548 | error_report("VFIO_MAP_DMA: %d", -errno); | |
549 | return -errno; | |
550 | } | |
551 | return 0; | |
552 | } | |
553 | ||
554 | /** | |
555 | * Undo the DMA mapping from @s with VFIO, and remove from mapping list. | |
556 | */ | |
557 | static void qemu_vfio_undo_mapping(QEMUVFIOState *s, IOVAMapping *mapping, | |
558 | Error **errp) | |
559 | { | |
560 | int index; | |
561 | struct vfio_iommu_type1_dma_unmap unmap = { | |
562 | .argsz = sizeof(unmap), | |
563 | .flags = 0, | |
564 | .iova = mapping->iova, | |
565 | .size = mapping->size, | |
566 | }; | |
567 | ||
568 | index = mapping - s->mappings; | |
569 | assert(mapping->size > 0); | |
570 | assert(QEMU_IS_ALIGNED(mapping->size, getpagesize())); | |
571 | assert(index >= 0 && index < s->nr_mappings); | |
572 | if (ioctl(s->container, VFIO_IOMMU_UNMAP_DMA, &unmap)) { | |
573 | error_setg(errp, "VFIO_UNMAP_DMA failed: %d", -errno); | |
574 | } | |
575 | memmove(mapping, &s->mappings[index + 1], | |
576 | sizeof(s->mappings[0]) * (s->nr_mappings - index - 1)); | |
577 | s->nr_mappings--; | |
d29eb678 | 578 | s->mappings = g_renew(IOVAMapping, s->mappings, s->nr_mappings); |
418026ca FZ |
579 | } |
580 | ||
581 | /* Check if the mapping list is (ascending) ordered. */ | |
582 | static bool qemu_vfio_verify_mappings(QEMUVFIOState *s) | |
583 | { | |
584 | int i; | |
585 | if (QEMU_VFIO_DEBUG) { | |
586 | for (i = 0; i < s->nr_mappings - 1; ++i) { | |
587 | if (!(s->mappings[i].host < s->mappings[i + 1].host)) { | |
588 | fprintf(stderr, "item %d not sorted!\n", i); | |
589 | qemu_vfio_dump_mappings(s); | |
590 | return false; | |
591 | } | |
592 | if (!(s->mappings[i].host + s->mappings[i].size <= | |
593 | s->mappings[i + 1].host)) { | |
594 | fprintf(stderr, "item %d overlap with next!\n", i); | |
595 | qemu_vfio_dump_mappings(s); | |
596 | return false; | |
597 | } | |
598 | } | |
599 | } | |
600 | return true; | |
601 | } | |
602 | ||
603 | /* Map [host, host + size) area into a contiguous IOVA address space, and store | |
604 | * the result in @iova if not NULL. The caller need to make sure the area is | |
605 | * aligned to page size, and mustn't overlap with existing mapping areas (split | |
606 | * mapping status within this area is not allowed). | |
607 | */ | |
608 | int qemu_vfio_dma_map(QEMUVFIOState *s, void *host, size_t size, | |
609 | bool temporary, uint64_t *iova) | |
610 | { | |
611 | int ret = 0; | |
612 | int index; | |
613 | IOVAMapping *mapping; | |
614 | uint64_t iova0; | |
615 | ||
616 | assert(QEMU_PTR_IS_ALIGNED(host, getpagesize())); | |
617 | assert(QEMU_IS_ALIGNED(size, getpagesize())); | |
618 | trace_qemu_vfio_dma_map(s, host, size, temporary, iova); | |
619 | qemu_mutex_lock(&s->lock); | |
620 | mapping = qemu_vfio_find_mapping(s, host, &index); | |
621 | if (mapping) { | |
622 | iova0 = mapping->iova + ((uint8_t *)host - (uint8_t *)mapping->host); | |
623 | } else { | |
624 | if (s->high_water_mark - s->low_water_mark + 1 < size) { | |
625 | ret = -ENOMEM; | |
626 | goto out; | |
627 | } | |
628 | if (!temporary) { | |
629 | iova0 = s->low_water_mark; | |
630 | mapping = qemu_vfio_add_mapping(s, host, size, index + 1, iova0); | |
631 | if (!mapping) { | |
632 | ret = -ENOMEM; | |
633 | goto out; | |
634 | } | |
635 | assert(qemu_vfio_verify_mappings(s)); | |
636 | ret = qemu_vfio_do_mapping(s, host, size, iova0); | |
637 | if (ret) { | |
638 | qemu_vfio_undo_mapping(s, mapping, NULL); | |
639 | goto out; | |
640 | } | |
641 | s->low_water_mark += size; | |
642 | qemu_vfio_dump_mappings(s); | |
643 | } else { | |
644 | iova0 = s->high_water_mark - size; | |
645 | ret = qemu_vfio_do_mapping(s, host, size, iova0); | |
646 | if (ret) { | |
647 | goto out; | |
648 | } | |
649 | s->high_water_mark -= size; | |
650 | } | |
651 | } | |
652 | if (iova) { | |
653 | *iova = iova0; | |
654 | } | |
655 | out: | |
656 | qemu_mutex_unlock(&s->lock); | |
657 | return ret; | |
658 | } | |
659 | ||
660 | /* Reset the high watermark and free all "temporary" mappings. */ | |
661 | int qemu_vfio_dma_reset_temporary(QEMUVFIOState *s) | |
662 | { | |
663 | struct vfio_iommu_type1_dma_unmap unmap = { | |
664 | .argsz = sizeof(unmap), | |
665 | .flags = 0, | |
666 | .iova = s->high_water_mark, | |
667 | .size = QEMU_VFIO_IOVA_MAX - s->high_water_mark, | |
668 | }; | |
669 | trace_qemu_vfio_dma_reset_temporary(s); | |
670 | qemu_mutex_lock(&s->lock); | |
671 | if (ioctl(s->container, VFIO_IOMMU_UNMAP_DMA, &unmap)) { | |
672 | error_report("VFIO_UNMAP_DMA: %d", -errno); | |
673 | qemu_mutex_unlock(&s->lock); | |
674 | return -errno; | |
675 | } | |
676 | s->high_water_mark = QEMU_VFIO_IOVA_MAX; | |
677 | qemu_mutex_unlock(&s->lock); | |
678 | return 0; | |
679 | } | |
680 | ||
681 | /* Unmapping the whole area that was previously mapped with | |
682 | * qemu_vfio_dma_map(). */ | |
683 | void qemu_vfio_dma_unmap(QEMUVFIOState *s, void *host) | |
684 | { | |
685 | int index = 0; | |
686 | IOVAMapping *m; | |
687 | ||
688 | if (!host) { | |
689 | return; | |
690 | } | |
691 | ||
692 | trace_qemu_vfio_dma_unmap(s, host); | |
693 | qemu_mutex_lock(&s->lock); | |
694 | m = qemu_vfio_find_mapping(s, host, &index); | |
695 | if (!m) { | |
696 | goto out; | |
697 | } | |
698 | qemu_vfio_undo_mapping(s, m, NULL); | |
699 | out: | |
700 | qemu_mutex_unlock(&s->lock); | |
701 | } | |
702 | ||
703 | static void qemu_vfio_reset(QEMUVFIOState *s) | |
704 | { | |
705 | ioctl(s->device, VFIO_DEVICE_RESET); | |
706 | } | |
707 | ||
708 | /* Close and free the VFIO resources. */ | |
709 | void qemu_vfio_close(QEMUVFIOState *s) | |
710 | { | |
711 | int i; | |
712 | ||
713 | if (!s) { | |
714 | return; | |
715 | } | |
716 | for (i = 0; i < s->nr_mappings; ++i) { | |
717 | qemu_vfio_undo_mapping(s, &s->mappings[i], NULL); | |
718 | } | |
719 | ram_block_notifier_remove(&s->ram_notifier); | |
720 | qemu_vfio_reset(s); | |
721 | close(s->device); | |
722 | close(s->group); | |
723 | close(s->container); | |
724 | } |