[qemu.git] / hw / char / exynos4210_uart.c

/*
 *  Exynos4210 UART Emulation
 *
 *  Copyright (C) 2011 Samsung Electronics Co Ltd.
 *    Maksim Kozlov, <[email protected]>
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License as published by the
 *  Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful, but WITHOUT
 *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 *  for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, see <http://www.gnu.org/licenses/>.
 *
 */

#include "qemu/osdep.h"
#include "hw/sysbus.h"
#include "qemu/error-report.h"
#include "sysemu/sysemu.h"
#include "chardev/char-fe.h"
#include "chardev/char-serial.h"

#include "hw/arm/exynos4210.h"

#undef DEBUG_UART
#undef DEBUG_UART_EXTEND
#undef DEBUG_IRQ
#undef DEBUG_Rx_DATA
#undef DEBUG_Tx_DATA

#define DEBUG_UART            0
#define DEBUG_UART_EXTEND     0
#define DEBUG_IRQ             0
#define DEBUG_Rx_DATA         0
#define DEBUG_Tx_DATA         0

#if DEBUG_UART
#define  PRINT_DEBUG(fmt, args...)  \
        do { \
            fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
        } while (0)

#if DEBUG_UART_EXTEND
#define  PRINT_DEBUG_EXTEND(fmt, args...) \
        do { \
            fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
        } while (0)
#else
#define  PRINT_DEBUG_EXTEND(fmt, args...) \
        do {} while (0)
#endif /* EXTEND */

#else
#define  PRINT_DEBUG(fmt, args...)  \
        do {} while (0)
#define  PRINT_DEBUG_EXTEND(fmt, args...) \
        do {} while (0)
#endif

#define  PRINT_ERROR(fmt, args...) \
        do { \
            fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
        } while (0)

/*
 *  Offsets for UART registers relative to SFR base address
 *  for UARTn
 *
 */
#define ULCON      0x0000 /* Line Control             */
#define UCON       0x0004 /* Control                  */
#define UFCON      0x0008 /* FIFO Control             */
#define UMCON      0x000C /* Modem Control            */
#define UTRSTAT    0x0010 /* Tx/Rx Status             */
#define UERSTAT    0x0014 /* UART Error Status        */
#define UFSTAT     0x0018 /* FIFO Status              */
#define UMSTAT     0x001C /* Modem Status             */
#define UTXH       0x0020 /* Transmit Buffer          */
#define URXH       0x0024 /* Receive Buffer           */
#define UBRDIV     0x0028 /* Baud Rate Divisor        */
#define UFRACVAL   0x002C /* Divisor Fractional Value */
#define UINTP      0x0030 /* Interrupt Pending        */
#define UINTSP     0x0034 /* Interrupt Source Pending */
#define UINTM      0x0038 /* Interrupt Mask           */

/*
 * for indexing register in the uint32_t array
 *
 * 'reg' - register offset (see offsets definitions above)
 *
 */
#define I_(reg) (reg / sizeof(uint32_t))

typedef struct Exynos4210UartReg {
    const char         *name; /* the only reason is the debug output */
    hwaddr  offset;
    uint32_t            reset_value;
} Exynos4210UartReg;

static const Exynos4210UartReg exynos4210_uart_regs[] = {
    {"ULCON",    ULCON,    0x00000000},
    {"UCON",     UCON,     0x00003000},
    {"UFCON",    UFCON,    0x00000000},
    {"UMCON",    UMCON,    0x00000000},
    {"UTRSTAT",  UTRSTAT,  0x00000006}, /* RO */
    {"UERSTAT",  UERSTAT,  0x00000000}, /* RO */
    {"UFSTAT",   UFSTAT,   0x00000000}, /* RO */
    {"UMSTAT",   UMSTAT,   0x00000000}, /* RO */
    {"UTXH",     UTXH,     0x5c5c5c5c}, /* WO, undefined reset value*/
    {"URXH",     URXH,     0x00000000}, /* RO */
    {"UBRDIV",   UBRDIV,   0x00000000},
    {"UFRACVAL", UFRACVAL, 0x00000000},
    {"UINTP",    UINTP,    0x00000000},
    {"UINTSP",   UINTSP,   0x00000000},
    {"UINTM",    UINTM,    0x00000000},
};

#define EXYNOS4210_UART_REGS_MEM_SIZE    0x3C

/* UART FIFO Control */
#define UFCON_FIFO_ENABLE                    0x1
#define UFCON_Rx_FIFO_RESET                  0x2
#define UFCON_Tx_FIFO_RESET                  0x4
#define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT    8
#define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT)
#define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT    4
#define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT)

/* Uart FIFO Status */
#define UFSTAT_Rx_FIFO_COUNT        0xff
#define UFSTAT_Rx_FIFO_FULL         0x100
#define UFSTAT_Rx_FIFO_ERROR        0x200
#define UFSTAT_Tx_FIFO_COUNT_SHIFT  16
#define UFSTAT_Tx_FIFO_COUNT        (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT)
#define UFSTAT_Tx_FIFO_FULL_SHIFT   24
#define UFSTAT_Tx_FIFO_FULL         (1 << UFSTAT_Tx_FIFO_FULL_SHIFT)

/* UART Interrupt Source Pending */
#define UINTSP_RXD      0x1 /* Receive interrupt  */
#define UINTSP_ERROR    0x2 /* Error interrupt    */
#define UINTSP_TXD      0x4 /* Transmit interrupt */
#define UINTSP_MODEM    0x8 /* Modem interrupt    */

/* UART Line Control */
#define ULCON_IR_MODE_SHIFT   6
#define ULCON_PARITY_SHIFT    3
#define ULCON_STOP_BIT_SHIFT  1

/* UART Tx/Rx Status */
#define UTRSTAT_TRANSMITTER_EMPTY       0x4
#define UTRSTAT_Tx_BUFFER_EMPTY         0x2
#define UTRSTAT_Rx_BUFFER_DATA_READY    0x1

/* UART Error Status */
#define UERSTAT_OVERRUN  0x1
#define UERSTAT_PARITY   0x2
#define UERSTAT_FRAME    0x4
#define UERSTAT_BREAK    0x8

typedef struct {
    uint8_t    *data;
    uint32_t    sp, rp; /* store and retrieve pointers */
    uint32_t    size;
} Exynos4210UartFIFO;

#define TYPE_EXYNOS4210_UART "exynos4210.uart"
#define EXYNOS4210_UART(obj) \
    OBJECT_CHECK(Exynos4210UartState, (obj), TYPE_EXYNOS4210_UART)

typedef struct Exynos4210UartState {
    SysBusDevice parent_obj;

    MemoryRegion iomem;

    uint32_t             reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)];
    Exynos4210UartFIFO   rx;
    Exynos4210UartFIFO   tx;

    CharBackend       chr;
    qemu_irq          irq;

    uint32_t channel;

} Exynos4210UartState;


#if DEBUG_UART
/* Used only for debugging inside PRINT_DEBUG_... macros */
static const char *exynos4210_uart_regname(hwaddr  offset)
{

    int i;

    for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) {
        if (offset == exynos4210_uart_regs[i].offset) {
            return exynos4210_uart_regs[i].name;
        }
    }

    return NULL;
}
#endif


static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch)
{
    q->data[q->sp] = ch;
    q->sp = (q->sp + 1) % q->size;
}

static uint8_t fifo_retrieve(Exynos4210UartFIFO *q)
{
    uint8_t ret = q->data[q->rp];
    q->rp = (q->rp + 1) % q->size;
    return  ret;
}

static int fifo_elements_number(const Exynos4210UartFIFO *q)
{
    if (q->sp < q->rp) {
        return q->size - q->rp + q->sp;
    }

    return q->sp - q->rp;
}

static int fifo_empty_elements_number(const Exynos4210UartFIFO *q)
{
    return q->size - fifo_elements_number(q);
}

static void fifo_reset(Exynos4210UartFIFO *q)
{
    g_free(q->data);
    q->data = NULL;

    q->data = (uint8_t *)g_malloc0(q->size);

    q->sp = 0;
    q->rp = 0;
}

static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s)
{
    uint32_t level = 0;
    uint32_t reg;

    reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >>
            UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT;

    switch (s->channel) {
    case 0:
        level = reg * 32;
        break;
    case 1:
    case 4:
        level = reg * 8;
        break;
    case 2:
    case 3:
        level = reg * 2;
        break;
    default:
        level = 0;
        PRINT_ERROR("Wrong UART channel number: %d\n", s->channel);
    }

    return level;
}

static void exynos4210_uart_update_irq(Exynos4210UartState *s)
{
    /*
     * The Tx interrupt is always requested if the number of data in the
     * transmit FIFO is smaller than the trigger level.
     */
    if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {

        uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >>
                UFSTAT_Tx_FIFO_COUNT_SHIFT;

        if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) {
            s->reg[I_(UINTSP)] |= UINTSP_TXD;
        }
    }

    s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)];

    if (s->reg[I_(UINTP)]) {
        qemu_irq_raise(s->irq);

#if DEBUG_IRQ
        fprintf(stderr, "UART%d: IRQ has been raised: %08x\n",
                s->channel, s->reg[I_(UINTP)]);
#endif

    } else {
        qemu_irq_lower(s->irq);
    }
}

static void exynos4210_uart_update_parameters(Exynos4210UartState *s)
{
    int speed, parity, data_bits, stop_bits;
    QEMUSerialSetParams ssp;
    uint64_t uclk_rate;

    if (s->reg[I_(UBRDIV)] == 0) {
        return;
    }

    if (s->reg[I_(ULCON)] & 0x20) {
        if (s->reg[I_(ULCON)] & 0x28) {
            parity = 'E';
        } else {
            parity = 'O';
        }
    } else {
        parity = 'N';
    }

    if (s->reg[I_(ULCON)] & 0x4) {
        stop_bits = 2;
    } else {
        stop_bits = 1;
    }

    data_bits = (s->reg[I_(ULCON)] & 0x3) + 5;

    uclk_rate = 24000000;

    speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) +
            (s->reg[I_(UFRACVAL)] & 0x7) + 16);

    ssp.speed     = speed;
    ssp.parity    = parity;
    ssp.data_bits = data_bits;
    ssp.stop_bits = stop_bits;

    qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);

    PRINT_DEBUG("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n",
                s->channel, speed, parity, data_bits, stop_bits);
}

static void exynos4210_uart_write(void *opaque, hwaddr offset,
                               uint64_t val, unsigned size)
{
    Exynos4210UartState *s = (Exynos4210UartState *)opaque;
    uint8_t ch;

    PRINT_DEBUG_EXTEND("UART%d: <0x%04x> %s <- 0x%08llx\n", s->channel,
        offset, exynos4210_uart_regname(offset), (long long unsigned int)val);

    switch (offset) {
    case ULCON:
    case UBRDIV:
    case UFRACVAL:
        s->reg[I_(offset)] = val;
        exynos4210_uart_update_parameters(s);
        break;
    case UFCON:
        s->reg[I_(UFCON)] = val;
        if (val & UFCON_Rx_FIFO_RESET) {
            fifo_reset(&s->rx);
            s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET;
            PRINT_DEBUG("UART%d: Rx FIFO Reset\n", s->channel);
        }
        if (val & UFCON_Tx_FIFO_RESET) {
            fifo_reset(&s->tx);
            s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET;
            PRINT_DEBUG("UART%d: Tx FIFO Reset\n", s->channel);
        }
        break;

    case UTXH:
        if (qemu_chr_fe_backend_connected(&s->chr)) {
            s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY |
                    UTRSTAT_Tx_BUFFER_EMPTY);
            ch = (uint8_t)val;
            /* XXX this blocks entire thread. Rewrite to use
             * qemu_chr_fe_write and background I/O callbacks */
            qemu_chr_fe_write_all(&s->chr, &ch, 1);
#if DEBUG_Tx_DATA
            fprintf(stderr, "%c", ch);
#endif
            s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY |
                    UTRSTAT_Tx_BUFFER_EMPTY;
            s->reg[I_(UINTSP)]  |= UINTSP_TXD;
            exynos4210_uart_update_irq(s);
        }
        break;

    case UINTP:
        s->reg[I_(UINTP)] &= ~val;
        s->reg[I_(UINTSP)] &= ~val;
        PRINT_DEBUG("UART%d: UINTP [%04x] have been cleared: %08x\n",
                    s->channel, offset, s->reg[I_(UINTP)]);
        exynos4210_uart_update_irq(s);
        break;
    case UTRSTAT:
    case UERSTAT:
    case UFSTAT:
    case UMSTAT:
    case URXH:
        PRINT_DEBUG("UART%d: Trying to write into RO register: %s [%04x]\n",
                    s->channel, exynos4210_uart_regname(offset), offset);
        break;
    case UINTSP:
        s->reg[I_(UINTSP)]  &= ~val;
        break;
    case UINTM:
        s->reg[I_(UINTM)] = val;
        exynos4210_uart_update_irq(s);
        break;
    case UCON:
    case UMCON:
    default:
        s->reg[I_(offset)] = val;
        break;
    }
}
static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset,
                                  unsigned size)
{
    Exynos4210UartState *s = (Exynos4210UartState *)opaque;
    uint32_t res;

    switch (offset) {
    case UERSTAT: /* Read Only */
        res = s->reg[I_(UERSTAT)];
        s->reg[I_(UERSTAT)] = 0;
        return res;
    case UFSTAT: /* Read Only */
        s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff;
        if (fifo_empty_elements_number(&s->rx) == 0) {
            s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL;
            s->reg[I_(UFSTAT)] &= ~0xff;
        }
        return s->reg[I_(UFSTAT)];
    case URXH:
        if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
            if (fifo_elements_number(&s->rx)) {
                res = fifo_retrieve(&s->rx);
#if DEBUG_Rx_DATA
                fprintf(stderr, "%c", res);
#endif
                if (!fifo_elements_number(&s->rx)) {
                    s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
                } else {
                    s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
                }
            } else {
                s->reg[I_(UINTSP)] |= UINTSP_ERROR;
                exynos4210_uart_update_irq(s);
                res = 0;
            }
        } else {
            s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
            res = s->reg[I_(URXH)];
        }
        return res;
    case UTXH:
        PRINT_DEBUG("UART%d: Trying to read from WO register: %s [%04x]\n",
                    s->channel, exynos4210_uart_regname(offset), offset);
        break;
    default:
        return s->reg[I_(offset)];
    }

    return 0;
}

static const MemoryRegionOps exynos4210_uart_ops = {
    .read = exynos4210_uart_read,
    .write = exynos4210_uart_write,
    .endianness = DEVICE_NATIVE_ENDIAN,
    .valid = {
        .max_access_size = 4,
        .unaligned = false
    },
};

static int exynos4210_uart_can_receive(void *opaque)
{
    Exynos4210UartState *s = (Exynos4210UartState *)opaque;

    return fifo_empty_elements_number(&s->rx);
}


static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size)
{
    Exynos4210UartState *s = (Exynos4210UartState *)opaque;
    int i;

    if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
        if (fifo_empty_elements_number(&s->rx) < size) {
            for (i = 0; i < fifo_empty_elements_number(&s->rx); i++) {
                fifo_store(&s->rx, buf[i]);
            }
            s->reg[I_(UINTSP)] |= UINTSP_ERROR;
            s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
        } else {
            for (i = 0; i < size; i++) {
                fifo_store(&s->rx, buf[i]);
            }
            s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
        }
        /* XXX: Around here we maybe should check Rx trigger level */
        s->reg[I_(UINTSP)] |= UINTSP_RXD;
    } else {
        s->reg[I_(URXH)] = buf[0];
        s->reg[I_(UINTSP)] |= UINTSP_RXD;
        s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
    }

    exynos4210_uart_update_irq(s);
}


static void exynos4210_uart_event(void *opaque, int event)
{
    Exynos4210UartState *s = (Exynos4210UartState *)opaque;

    if (event == CHR_EVENT_BREAK) {
        /* When the RxDn is held in logic 0, then a null byte is pushed into the
         * fifo */
        fifo_store(&s->rx, '\0');
        s->reg[I_(UERSTAT)] |= UERSTAT_BREAK;
        exynos4210_uart_update_irq(s);
    }
}


static void exynos4210_uart_reset(DeviceState *dev)
{
    Exynos4210UartState *s = EXYNOS4210_UART(dev);
    int i;

    for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) {
        s->reg[I_(exynos4210_uart_regs[i].offset)] =
                exynos4210_uart_regs[i].reset_value;
    }

    fifo_reset(&s->rx);
    fifo_reset(&s->tx);

    PRINT_DEBUG("UART%d: Rx FIFO size: %d\n", s->channel, s->rx.size);
}

static const VMStateDescription vmstate_exynos4210_uart_fifo = {
    .name = "exynos4210.uart.fifo",
    .version_id = 1,
    .minimum_version_id = 1,
    .fields = (VMStateField[]) {
        VMSTATE_UINT32(sp, Exynos4210UartFIFO),
        VMSTATE_UINT32(rp, Exynos4210UartFIFO),
        VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, size),
        VMSTATE_END_OF_LIST()
    }
};

static const VMStateDescription vmstate_exynos4210_uart = {
    .name = "exynos4210.uart",
    .version_id = 1,
    .minimum_version_id = 1,
    .fields = (VMStateField[]) {
        VMSTATE_STRUCT(rx, Exynos4210UartState, 1,
                       vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO),
        VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState,
                             EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)),
        VMSTATE_END_OF_LIST()
    }
};

DeviceState *exynos4210_uart_create(hwaddr addr,
                                    int fifo_size,
                                    int channel,
                                    Chardev *chr,
                                    qemu_irq irq)
{
    DeviceState  *dev;
    SysBusDevice *bus;

    const char chr_name[] = "serial";
    char label[ARRAY_SIZE(chr_name) + 1];

    dev = qdev_create(NULL, TYPE_EXYNOS4210_UART);

    if (!chr) {
        if (channel >= MAX_SERIAL_PORTS) {
            error_report("Only %d serial ports are supported by QEMU",
                         MAX_SERIAL_PORTS);
            exit(1);
        }
        chr = serial_hds[channel];
        if (!chr) {
            snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, channel);
            chr = qemu_chr_new(label, "null");
            if (!(chr)) {
                error_report("Can't assign serial port to UART%d", channel);
                exit(1);
            }
        }
    }

    qdev_prop_set_chr(dev, "chardev", chr);
    qdev_prop_set_uint32(dev, "channel", channel);
    qdev_prop_set_uint32(dev, "rx-size", fifo_size);
    qdev_prop_set_uint32(dev, "tx-size", fifo_size);

    bus = SYS_BUS_DEVICE(dev);
    qdev_init_nofail(dev);
    if (addr != (hwaddr)-1) {
        sysbus_mmio_map(bus, 0, addr);
    }
    sysbus_connect_irq(bus, 0, irq);

    return dev;
}

static void exynos4210_uart_init(Object *obj)
{
    SysBusDevice *dev = SYS_BUS_DEVICE(obj);
    Exynos4210UartState *s = EXYNOS4210_UART(dev);

    /* memory mapping */
    memory_region_init_io(&s->iomem, obj, &exynos4210_uart_ops, s,
                          "exynos4210.uart", EXYNOS4210_UART_REGS_MEM_SIZE);
    sysbus_init_mmio(dev, &s->iomem);

    sysbus_init_irq(dev, &s->irq);
}

static void exynos4210_uart_realize(DeviceState *dev, Error **errp)
{
    Exynos4210UartState *s = EXYNOS4210_UART(dev);

    qemu_chr_fe_set_handlers(&s->chr, exynos4210_uart_can_receive,
                             exynos4210_uart_receive, exynos4210_uart_event,
                             NULL, s, NULL, true);
}

static Property exynos4210_uart_properties[] = {
    DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr),
    DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0),
    DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16),
    DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16),
    DEFINE_PROP_END_OF_LIST(),
};

static void exynos4210_uart_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);

    dc->realize = exynos4210_uart_realize;
    dc->reset = exynos4210_uart_reset;
    dc->props = exynos4210_uart_properties;
    dc->vmsd = &vmstate_exynos4210_uart;
}

static const TypeInfo exynos4210_uart_info = {
    .name          = TYPE_EXYNOS4210_UART,
    .parent        = TYPE_SYS_BUS_DEVICE,
    .instance_size = sizeof(Exynos4210UartState),
    .instance_init = exynos4210_uart_init,
    .class_init    = exynos4210_uart_class_init,
};

static void exynos4210_uart_register(void)
{
    type_register_static(&exynos4210_uart_info);
}

type_init(exynos4210_uart_register)
Commit	Line	Data
e5a4914e MK	1	/*
	2	* Exynos4210 UART Emulation
	3	*
	4	* Copyright (C) 2011 Samsung Electronics Co Ltd.
	5	* Maksim Kozlov, <[email protected]>
	6	*
	7	* This program is free software; you can redistribute it and/or modify it
	8	* under the terms of the GNU General Public License as published by the
	9	* Free Software Foundation; either version 2 of the License, or
	10	* (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful, but WITHOUT
	13	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	14	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	15	* for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License along
	18	* with this program; if not, see <http://www.gnu.org/licenses/>.
	19	*
	20	*/
	21
8ef94f0b	22	#include "qemu/osdep.h"
83c9f4ca	23	#include "hw/sysbus.h"
c525436e	24	#include "qemu/error-report.h"
9c17d615	25	#include "sysemu/sysemu.h"
4d43a603	26	#include "chardev/char-fe.h"
7566c6ef	27	#include "chardev/char-serial.h"
e5a4914e	28
0d09e41a	29	#include "hw/arm/exynos4210.h"
e5a4914e MK	30
	31	#undef DEBUG_UART
	32	#undef DEBUG_UART_EXTEND
	33	#undef DEBUG_IRQ
	34	#undef DEBUG_Rx_DATA
	35	#undef DEBUG_Tx_DATA
	36
	37	#define DEBUG_UART 0
	38	#define DEBUG_UART_EXTEND 0
	39	#define DEBUG_IRQ 0
	40	#define DEBUG_Rx_DATA 0
	41	#define DEBUG_Tx_DATA 0
	42
	43	#if DEBUG_UART
	44	#define PRINT_DEBUG(fmt, args...) \
	45	do { \
	46	fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
	47	} while (0)
	48
	49	#if DEBUG_UART_EXTEND
	50	#define PRINT_DEBUG_EXTEND(fmt, args...) \
	51	do { \
	52	fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
	53	} while (0)
	54	#else
	55	#define PRINT_DEBUG_EXTEND(fmt, args...) \
	56	do {} while (0)
	57	#endif /* EXTEND */
	58
	59	#else
	60	#define PRINT_DEBUG(fmt, args...) \
	61	do {} while (0)
	62	#define PRINT_DEBUG_EXTEND(fmt, args...) \
	63	do {} while (0)
	64	#endif
	65
	66	#define PRINT_ERROR(fmt, args...) \
	67	do { \
	68	fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
	69	} while (0)
	70
	71	/*
	72	* Offsets for UART registers relative to SFR base address
	73	* for UARTn
	74	*
	75	*/
	76	#define ULCON 0x0000 /* Line Control */
	77	#define UCON 0x0004 /* Control */
	78	#define UFCON 0x0008 /* FIFO Control */
	79	#define UMCON 0x000C /* Modem Control */
	80	#define UTRSTAT 0x0010 /* Tx/Rx Status */
	81	#define UERSTAT 0x0014 /* UART Error Status */
	82	#define UFSTAT 0x0018 /* FIFO Status */
	83	#define UMSTAT 0x001C /* Modem Status */
	84	#define UTXH 0x0020 /* Transmit Buffer */
	85	#define URXH 0x0024 /* Receive Buffer */
	86	#define UBRDIV 0x0028 /* Baud Rate Divisor */
	87	#define UFRACVAL 0x002C /* Divisor Fractional Value */
	88	#define UINTP 0x0030 /* Interrupt Pending */
	89	#define UINTSP 0x0034 /* Interrupt Source Pending */
	90	#define UINTM 0x0038 /* Interrupt Mask */
	91
	92	/*
	93	* for indexing register in the uint32_t array
94	*
95	* 'reg' - register offset (see offsets definitions above)
96	*
97	*/
98	#define I_(reg) (reg / sizeof(uint32_t))
99
100	typedef struct Exynos4210UartReg {
101	const char name; / the only reason is the debug output */
a8170e5e	102	hwaddr offset;
e5a4914e MK	103	uint32_t reset_value;
	104	} Exynos4210UartReg;
	105
75c6d92e	106	static const Exynos4210UartReg exynos4210_uart_regs[] = {
e5a4914e MK	107	{"ULCON", ULCON, 0x00000000},
	108	{"UCON", UCON, 0x00003000},
	109	{"UFCON", UFCON, 0x00000000},
	110	{"UMCON", UMCON, 0x00000000},
	111	{"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */
	112	{"UERSTAT", UERSTAT, 0x00000000}, /* RO */
	113	{"UFSTAT", UFSTAT, 0x00000000}, /* RO */
	114	{"UMSTAT", UMSTAT, 0x00000000}, /* RO */
	115	{"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/
	116	{"URXH", URXH, 0x00000000}, /* RO */
	117	{"UBRDIV", UBRDIV, 0x00000000},
	118	{"UFRACVAL", UFRACVAL, 0x00000000},
	119	{"UINTP", UINTP, 0x00000000},
	120	{"UINTSP", UINTSP, 0x00000000},
	121	{"UINTM", UINTM, 0x00000000},
	122	};
	123
	124	#define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C
	125
	126	/* UART FIFO Control */
	127	#define UFCON_FIFO_ENABLE 0x1
	128	#define UFCON_Rx_FIFO_RESET 0x2
	129	#define UFCON_Tx_FIFO_RESET 0x4
	130	#define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8
	131	#define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT)
	132	#define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4
	133	#define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT)
	134
	135	/* Uart FIFO Status */
	136	#define UFSTAT_Rx_FIFO_COUNT 0xff
	137	#define UFSTAT_Rx_FIFO_FULL 0x100
	138	#define UFSTAT_Rx_FIFO_ERROR 0x200
	139	#define UFSTAT_Tx_FIFO_COUNT_SHIFT 16
	140	#define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT)
	141	#define UFSTAT_Tx_FIFO_FULL_SHIFT 24
	142	#define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT)
	143
	144	/* UART Interrupt Source Pending */
	145	#define UINTSP_RXD 0x1 /* Receive interrupt */
	146	#define UINTSP_ERROR 0x2 /* Error interrupt */
	147	#define UINTSP_TXD 0x4 /* Transmit interrupt */
	148	#define UINTSP_MODEM 0x8 /* Modem interrupt */
	149
	150	/* UART Line Control */
	151	#define ULCON_IR_MODE_SHIFT 6
	152	#define ULCON_PARITY_SHIFT 3
	153	#define ULCON_STOP_BIT_SHIFT 1
	154
	155	/* UART Tx/Rx Status */
	156	#define UTRSTAT_TRANSMITTER_EMPTY 0x4
	157	#define UTRSTAT_Tx_BUFFER_EMPTY 0x2
	158	#define UTRSTAT_Rx_BUFFER_DATA_READY 0x1
	159
	160	/* UART Error Status */
	161	#define UERSTAT_OVERRUN 0x1
	162	#define UERSTAT_PARITY 0x2
	163	#define UERSTAT_FRAME 0x4
	164	#define UERSTAT_BREAK 0x8
	165
	166	typedef struct {
	167	uint8_t *data;
	168	uint32_t sp, rp; /* store and retrieve pointers */
	169	uint32_t size;
	170	} Exynos4210UartFIFO;
171
61149ff6 AF	172	#define TYPE_EXYNOS4210_UART "exynos4210.uart"
	173	#define EXYNOS4210_UART(obj) \
	174	OBJECT_CHECK(Exynos4210UartState, (obj), TYPE_EXYNOS4210_UART)
	175
	176	typedef struct Exynos4210UartState {
	177	SysBusDevice parent_obj;
	178
e5a4914e MK	179	MemoryRegion iomem;
	180
	181	uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)];
	182	Exynos4210UartFIFO rx;
	183	Exynos4210UartFIFO tx;
	184
becdfa00	185	CharBackend chr;
e5a4914e MK	186	qemu_irq irq;
	187
	188	uint32_t channel;
	189
	190	} Exynos4210UartState;
	191
	192
	193	#if DEBUG_UART
	194	/* Used only for debugging inside PRINT_DEBUG_... macros */
a8170e5e	195	static const char *exynos4210_uart_regname(hwaddr offset)
e5a4914e MK	196	{
e5a4914e MK	197
e5a4914e MK	198	int i;
e5a4914e MK	199
c46b07f0	200	for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) {
e5a4914e MK	201	if (offset == exynos4210_uart_regs[i].offset) {
	202	return exynos4210_uart_regs[i].name;
	203	}
	204	}
	205
	206	return NULL;
	207	}
	208	#endif
	209
	210
	211	static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch)
	212	{
	213	q->data[q->sp] = ch;
	214	q->sp = (q->sp + 1) % q->size;
	215	}
	216
	217	static uint8_t fifo_retrieve(Exynos4210UartFIFO *q)
	218	{
	219	uint8_t ret = q->data[q->rp];
	220	q->rp = (q->rp + 1) % q->size;
	221	return ret;
	222	}
	223
75c6d92e	224	static int fifo_elements_number(const Exynos4210UartFIFO *q)
e5a4914e MK	225	{
	226	if (q->sp < q->rp) {
	227	return q->size - q->rp + q->sp;
	228	}
	229
	230	return q->sp - q->rp;
	231	}
	232
75c6d92e	233	static int fifo_empty_elements_number(const Exynos4210UartFIFO *q)
e5a4914e MK	234	{
	235	return q->size - fifo_elements_number(q);
	236	}
	237
	238	static void fifo_reset(Exynos4210UartFIFO *q)
	239	{
012aef07 MA	240	g_free(q->data);
012aef07 MA	241	q->data = NULL;
e5a4914e MK	242
	243	q->data = (uint8_t *)g_malloc0(q->size);
	244
	245	q->sp = 0;
	246	q->rp = 0;
	247	}
	248
75c6d92e	249	static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s)
e5a4914e MK	250	{
	251	uint32_t level = 0;
	252	uint32_t reg;
	253
b85f62d7	254	reg = (s->reg[I_(UFCON)] & UFCON_Tx_FIFO_TRIGGER_LEVEL) >>
e5a4914e MK	255	UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT;
	256
	257	switch (s->channel) {
	258	case 0:
	259	level = reg * 32;
	260	break;
	261	case 1:
	262	case 4:
	263	level = reg * 8;
	264	break;
	265	case 2:
	266	case 3:
	267	level = reg * 2;
	268	break;
	269	default:
	270	level = 0;
	271	PRINT_ERROR("Wrong UART channel number: %d\n", s->channel);
	272	}
	273
	274	return level;
	275	}
	276
	277	static void exynos4210_uart_update_irq(Exynos4210UartState *s)
	278	{
	279	/*
	280	* The Tx interrupt is always requested if the number of data in the
	281	* transmit FIFO is smaller than the trigger level.
	282	*/
b85f62d7	283	if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
e5a4914e	284
b85f62d7	285	uint32_t count = (s->reg[I_(UFSTAT)] & UFSTAT_Tx_FIFO_COUNT) >>
e5a4914e MK	286	UFSTAT_Tx_FIFO_COUNT_SHIFT;
	287
	288	if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) {
	289	s->reg[I_(UINTSP)] \|= UINTSP_TXD;
	290	}
	291	}
	292
	293	s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)];
	294
	295	if (s->reg[I_(UINTP)]) {
	296	qemu_irq_raise(s->irq);
	297
	298	#if DEBUG_IRQ
	299	fprintf(stderr, "UART%d: IRQ has been raised: %08x\n",
	300	s->channel, s->reg[I_(UINTP)]);
	301	#endif
	302
	303	} else {
	304	qemu_irq_lower(s->irq);
	305	}
	306	}
	307
	308	static void exynos4210_uart_update_parameters(Exynos4210UartState *s)
	309	{
e62694a0	310	int speed, parity, data_bits, stop_bits;
e5a4914e MK	311	QEMUSerialSetParams ssp;
	312	uint64_t uclk_rate;
	313
	314	if (s->reg[I_(UBRDIV)] == 0) {
	315	return;
	316	}
	317
e5a4914e	318	if (s->reg[I_(ULCON)] & 0x20) {
e5a4914e MK	319	if (s->reg[I_(ULCON)] & 0x28) {
	320	parity = 'E';
	321	} else {
	322	parity = 'O';
	323	}
	324	} else {
	325	parity = 'N';
	326	}
	327
	328	if (s->reg[I_(ULCON)] & 0x4) {
	329	stop_bits = 2;
	330	} else {
	331	stop_bits = 1;
	332	}
	333
	334	data_bits = (s->reg[I_(ULCON)] & 0x3) + 5;
	335
e5a4914e MK	336	uclk_rate = 24000000;
	337
	338	speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) +
	339	(s->reg[I_(UFRACVAL)] & 0x7) + 16);
	340
	341	ssp.speed = speed;
	342	ssp.parity = parity;
	343	ssp.data_bits = data_bits;
	344	ssp.stop_bits = stop_bits;
	345
5345fdb4	346	qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
e5a4914e MK	347
	348	PRINT_DEBUG("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n",
	349	s->channel, speed, parity, data_bits, stop_bits);
	350	}
	351
a8170e5e	352	static void exynos4210_uart_write(void *opaque, hwaddr offset,
e5a4914e MK	353	uint64_t val, unsigned size)
	354	{
	355	Exynos4210UartState s = (Exynos4210UartState )opaque;
	356	uint8_t ch;
	357
	358	PRINT_DEBUG_EXTEND("UART%d: <0x%04x> %s <- 0x%08llx\n", s->channel,
	359	offset, exynos4210_uart_regname(offset), (long long unsigned int)val);
	360
	361	switch (offset) {
	362	case ULCON:
	363	case UBRDIV:
	364	case UFRACVAL:
	365	s->reg[I_(offset)] = val;
	366	exynos4210_uart_update_parameters(s);
	367	break;
	368	case UFCON:
	369	s->reg[I_(UFCON)] = val;
	370	if (val & UFCON_Rx_FIFO_RESET) {
	371	fifo_reset(&s->rx);
	372	s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET;
	373	PRINT_DEBUG("UART%d: Rx FIFO Reset\n", s->channel);
	374	}
	375	if (val & UFCON_Tx_FIFO_RESET) {
	376	fifo_reset(&s->tx);
	377	s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET;
	378	PRINT_DEBUG("UART%d: Tx FIFO Reset\n", s->channel);
	379	}
	380	break;
	381
	382	case UTXH:
30650701	383	if (qemu_chr_fe_backend_connected(&s->chr)) {
e5a4914e MK	384	s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY \|
	385	UTRSTAT_Tx_BUFFER_EMPTY);
	386	ch = (uint8_t)val;
6ab3fc32 DB	387	/* XXX this blocks entire thread. Rewrite to use
6ab3fc32 DB	388	* qemu_chr_fe_write and background I/O callbacks */
5345fdb4	389	qemu_chr_fe_write_all(&s->chr, &ch, 1);
e5a4914e MK	390	#if DEBUG_Tx_DATA
	391	fprintf(stderr, "%c", ch);
	392	#endif
	393	s->reg[I_(UTRSTAT)] \|= UTRSTAT_TRANSMITTER_EMPTY \|
	394	UTRSTAT_Tx_BUFFER_EMPTY;
	395	s->reg[I_(UINTSP)] \|= UINTSP_TXD;
	396	exynos4210_uart_update_irq(s);
	397	}
	398	break;
	399
	400	case UINTP:
	401	s->reg[I_(UINTP)] &= ~val;
	402	s->reg[I_(UINTSP)] &= ~val;
	403	PRINT_DEBUG("UART%d: UINTP [%04x] have been cleared: %08x\n",
	404	s->channel, offset, s->reg[I_(UINTP)]);
	405	exynos4210_uart_update_irq(s);
	406	break;
	407	case UTRSTAT:
	408	case UERSTAT:
	409	case UFSTAT:
	410	case UMSTAT:
	411	case URXH:
	412	PRINT_DEBUG("UART%d: Trying to write into RO register: %s [%04x]\n",
	413	s->channel, exynos4210_uart_regname(offset), offset);
	414	break;
	415	case UINTSP:
	416	s->reg[I_(UINTSP)] &= ~val;
	417	break;
	418	case UINTM:
	419	s->reg[I_(UINTM)] = val;
	420	exynos4210_uart_update_irq(s);
	421	break;
	422	case UCON:
	423	case UMCON:
	424	default:
	425	s->reg[I_(offset)] = val;
	426	break;
	427	}
	428	}
a8170e5e	429	static uint64_t exynos4210_uart_read(void *opaque, hwaddr offset,
e5a4914e MK	430	unsigned size)
	431	{
	432	Exynos4210UartState s = (Exynos4210UartState )opaque;
	433	uint32_t res;
	434
	435	switch (offset) {
	436	case UERSTAT: /* Read Only */
	437	res = s->reg[I_(UERSTAT)];
	438	s->reg[I_(UERSTAT)] = 0;
	439	return res;
	440	case UFSTAT: /* Read Only */
	441	s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff;
	442	if (fifo_empty_elements_number(&s->rx) == 0) {
	443	s->reg[I_(UFSTAT)] \|= UFSTAT_Rx_FIFO_FULL;
	444	s->reg[I_(UFSTAT)] &= ~0xff;
	445	}
	446	return s->reg[I_(UFSTAT)];
	447	case URXH:
	448	if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
	449	if (fifo_elements_number(&s->rx)) {
	450	res = fifo_retrieve(&s->rx);
	451	#if DEBUG_Rx_DATA
	452	fprintf(stderr, "%c", res);
	453	#endif
	454	if (!fifo_elements_number(&s->rx)) {
	455	s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
	456	} else {
	457	s->reg[I_(UTRSTAT)] \|= UTRSTAT_Rx_BUFFER_DATA_READY;
	458	}
	459	} else {
	460	s->reg[I_(UINTSP)] \|= UINTSP_ERROR;
	461	exynos4210_uart_update_irq(s);
	462	res = 0;
	463	}
	464	} else {
	465	s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
	466	res = s->reg[I_(URXH)];
	467	}
	468	return res;
	469	case UTXH:
	470	PRINT_DEBUG("UART%d: Trying to read from WO register: %s [%04x]\n",
	471	s->channel, exynos4210_uart_regname(offset), offset);
	472	break;
	473	default:
	474	return s->reg[I_(offset)];
	475	}
	476
	477	return 0;
	478	}
	479
	480	static const MemoryRegionOps exynos4210_uart_ops = {
	481	.read = exynos4210_uart_read,
	482	.write = exynos4210_uart_write,
	483	.endianness = DEVICE_NATIVE_ENDIAN,
	484	.valid = {
	485	.max_access_size = 4,
	486	.unaligned = false
	487	},
	488	};
	489
	490	static int exynos4210_uart_can_receive(void *opaque)
	491	{
	492	Exynos4210UartState s = (Exynos4210UartState )opaque;
	493
494	return fifo_empty_elements_number(&s->rx);
495	}
496
497
498	static void exynos4210_uart_receive(void opaque, const uint8_t buf, int size)
499	{
500	Exynos4210UartState s = (Exynos4210UartState )opaque;
501	int i;
502
503	if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
504	if (fifo_empty_elements_number(&s->rx) < size) {
505	for (i = 0; i < fifo_empty_elements_number(&s->rx); i++) {
506	fifo_store(&s->rx, buf[i]);
507	}
508	s->reg[I_(UINTSP)] \|= UINTSP_ERROR;
509	s->reg[I_(UTRSTAT)] \|= UTRSTAT_Rx_BUFFER_DATA_READY;
510	} else {
511	for (i = 0; i < size; i++) {
512	fifo_store(&s->rx, buf[i]);
513	}
514	s->reg[I_(UTRSTAT)] \|= UTRSTAT_Rx_BUFFER_DATA_READY;
515	}
516	/* XXX: Around here we maybe should check Rx trigger level */
517	s->reg[I_(UINTSP)] \|= UINTSP_RXD;
518	} else {
519	s->reg[I_(URXH)] = buf[0];
520	s->reg[I_(UINTSP)] \|= UINTSP_RXD;
521	s->reg[I_(UTRSTAT)] \|= UTRSTAT_Rx_BUFFER_DATA_READY;
522	}
523
524	exynos4210_uart_update_irq(s);
525	}
526
527
528	static void exynos4210_uart_event(void *opaque, int event)
529	{
530	Exynos4210UartState s = (Exynos4210UartState )opaque;
531
532	if (event == CHR_EVENT_BREAK) {
533	/* When the RxDn is held in logic 0, then a null byte is pushed into the
534	* fifo */
535	fifo_store(&s->rx, '\0');
536	s->reg[I_(UERSTAT)] \|= UERSTAT_BREAK;
537	exynos4210_uart_update_irq(s);
538	}
539	}
540
541
542	static void exynos4210_uart_reset(DeviceState *dev)
543	{
61149ff6	544	Exynos4210UartState *s = EXYNOS4210_UART(dev);
e5a4914e MK	545	int i;
e5a4914e MK	546
c46b07f0	547	for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) {
e5a4914e MK	548	s->reg[I_(exynos4210_uart_regs[i].offset)] =
	549	exynos4210_uart_regs[i].reset_value;
	550	}
	551
	552	fifo_reset(&s->rx);
	553	fifo_reset(&s->tx);
	554
	555	PRINT_DEBUG("UART%d: Rx FIFO size: %d\n", s->channel, s->rx.size);
	556	}
	557
	558	static const VMStateDescription vmstate_exynos4210_uart_fifo = {
	559	.name = "exynos4210.uart.fifo",
	560	.version_id = 1,
	561	.minimum_version_id = 1,
e5a4914e MK	562	.fields = (VMStateField[]) {
	563	VMSTATE_UINT32(sp, Exynos4210UartFIFO),
	564	VMSTATE_UINT32(rp, Exynos4210UartFIFO),
59046ec2	565	VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, size),
e5a4914e MK	566	VMSTATE_END_OF_LIST()
	567	}
	568	};
	569
	570	static const VMStateDescription vmstate_exynos4210_uart = {
	571	.name = "exynos4210.uart",
	572	.version_id = 1,
	573	.minimum_version_id = 1,
e5a4914e MK	574	.fields = (VMStateField[]) {
	575	VMSTATE_STRUCT(rx, Exynos4210UartState, 1,
	576	vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO),
	577	VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState,
	578	EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)),
	579	VMSTATE_END_OF_LIST()
	580	}
	581	};
	582
a8170e5e	583	DeviceState *exynos4210_uart_create(hwaddr addr,
61149ff6 AF	584	int fifo_size,
61149ff6 AF	585	int channel,
0ec7b3e7	586	Chardev *chr,
61149ff6	587	qemu_irq irq)
e5a4914e MK	588	{
	589	DeviceState *dev;
	590	SysBusDevice *bus;
	591
	592	const char chr_name[] = "serial";
	593	char label[ARRAY_SIZE(chr_name) + 1];
	594
61149ff6	595	dev = qdev_create(NULL, TYPE_EXYNOS4210_UART);
e5a4914e MK	596
	597	if (!chr) {
	598	if (channel >= MAX_SERIAL_PORTS) {
c525436e MA	599	error_report("Only %d serial ports are supported by QEMU",
	600	MAX_SERIAL_PORTS);
	601	exit(1);
e5a4914e MK	602	}
	603	chr = serial_hds[channel];
	604	if (!chr) {
	605	snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, channel);
b4948be9	606	chr = qemu_chr_new(label, "null");
e5a4914e	607	if (!(chr)) {
c525436e MA	608	error_report("Can't assign serial port to UART%d", channel);
c525436e MA	609	exit(1);
e5a4914e MK	610	}
	611	}
	612	}
	613
	614	qdev_prop_set_chr(dev, "chardev", chr);
	615	qdev_prop_set_uint32(dev, "channel", channel);
	616	qdev_prop_set_uint32(dev, "rx-size", fifo_size);
	617	qdev_prop_set_uint32(dev, "tx-size", fifo_size);
	618
1356b98d	619	bus = SYS_BUS_DEVICE(dev);
e5a4914e	620	qdev_init_nofail(dev);
a8170e5e	621	if (addr != (hwaddr)-1) {
e5a4914e MK	622	sysbus_mmio_map(bus, 0, addr);
	623	}
	624	sysbus_connect_irq(bus, 0, irq);
	625
	626	return dev;
	627	}
	628
5b982482	629	static void exynos4210_uart_init(Object *obj)
e5a4914e	630	{
5b982482	631	SysBusDevice *dev = SYS_BUS_DEVICE(obj);
61149ff6	632	Exynos4210UartState *s = EXYNOS4210_UART(dev);
e5a4914e MK	633
e5a4914e MK	634	/* memory mapping */
5b982482	635	memory_region_init_io(&s->iomem, obj, &exynos4210_uart_ops, s,
300b1fc6	636	"exynos4210.uart", EXYNOS4210_UART_REGS_MEM_SIZE);
e5a4914e MK	637	sysbus_init_mmio(dev, &s->iomem);
	638
	639	sysbus_init_irq(dev, &s->irq);
5b982482 XZ	640	}
	641
	642	static void exynos4210_uart_realize(DeviceState dev, Error *errp)
	643	{
	644	Exynos4210UartState *s = EXYNOS4210_UART(dev);
e5a4914e	645
5345fdb4 MAL	646	qemu_chr_fe_set_handlers(&s->chr, exynos4210_uart_can_receive,
5345fdb4 MAL	647	exynos4210_uart_receive, exynos4210_uart_event,
81517ba3	648	NULL, s, NULL, true);
e5a4914e MK	649	}
	650
	651	static Property exynos4210_uart_properties[] = {
	652	DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr),
	653	DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0),
	654	DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16),
	655	DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16),
	656	DEFINE_PROP_END_OF_LIST(),
	657	};
	658
	659	static void exynos4210_uart_class_init(ObjectClass klass, void data)
	660	{
	661	DeviceClass *dc = DEVICE_CLASS(klass);
e5a4914e	662
5b982482	663	dc->realize = exynos4210_uart_realize;
e5a4914e MK	664	dc->reset = exynos4210_uart_reset;
	665	dc->props = exynos4210_uart_properties;
	666	dc->vmsd = &vmstate_exynos4210_uart;
	667	}
	668
8c43a6f0	669	static const TypeInfo exynos4210_uart_info = {
61149ff6	670	.name = TYPE_EXYNOS4210_UART,
e5a4914e MK	671	.parent = TYPE_SYS_BUS_DEVICE,
e5a4914e MK	672	.instance_size = sizeof(Exynos4210UartState),
5b982482	673	.instance_init = exynos4210_uart_init,
e5a4914e MK	674	.class_init = exynos4210_uart_class_init,
	675	};
	676
	677	static void exynos4210_uart_register(void)
	678	{
	679	type_register_static(&exynos4210_uart_info);
	680	}
	681
	682	type_init(exynos4210_uart_register)