[qemu.git] / hw / palm.c

/*
 * PalmOne's (TM) PDAs.
 *
 * Copyright (C) 2006-2007 Andrzej Zaborowski  <[email protected]>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 or
 * (at your option) version 3 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, see <http://www.gnu.org/licenses/>.
 */
#include "hw.h"
#include "audio/audio.h"
#include "sysemu.h"
#include "console.h"
#include "omap.h"
#include "boards.h"
#include "arm-misc.h"
#include "devices.h"

static uint32_t static_readb(void *opaque, target_phys_addr_t offset)
{
    uint32_t *val = (uint32_t *) opaque;
    return *val >> ((offset & 3) << 3);
}

static uint32_t static_readh(void *opaque, target_phys_addr_t offset)
{
    uint32_t *val = (uint32_t *) opaque;
    return *val >> ((offset & 1) << 3);
}

static uint32_t static_readw(void *opaque, target_phys_addr_t offset)
{
    uint32_t *val = (uint32_t *) opaque;
    return *val >> ((offset & 0) << 3);
}

static void static_write(void *opaque, target_phys_addr_t offset,
                uint32_t value)
{
#ifdef SPY
    printf("%s: value %08lx written at " PA_FMT "\n",
                    __FUNCTION__, value, offset);
#endif
}

static CPUReadMemoryFunc * const static_readfn[] = {
    static_readb,
    static_readh,
    static_readw,
};

static CPUWriteMemoryFunc * const static_writefn[] = {
    static_write,
    static_write,
    static_write,
};

/* Palm Tunsgten|E support */

/* Shared GPIOs */
#define PALMTE_USBDETECT_GPIO	0
#define PALMTE_USB_OR_DC_GPIO	1
#define PALMTE_TSC_GPIO		4
#define PALMTE_PINTDAV_GPIO	6
#define PALMTE_MMC_WP_GPIO	8
#define PALMTE_MMC_POWER_GPIO	9
#define PALMTE_HDQ_GPIO		11
#define PALMTE_HEADPHONES_GPIO	14
#define PALMTE_SPEAKER_GPIO	15
/* MPU private GPIOs */
#define PALMTE_DC_GPIO		2
#define PALMTE_MMC_SWITCH_GPIO	4
#define PALMTE_MMC1_GPIO	6
#define PALMTE_MMC2_GPIO	7
#define PALMTE_MMC3_GPIO	11

static MouseTransformInfo palmte_pointercal = {
    .x = 320,
    .y = 320,
    .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
};

static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
{
    uWireSlave *tsc;

    tsc = tsc2102_init(omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO]);

    omap_uwire_attach(cpu->microwire, tsc, 0);
    omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));

    tsc210x_set_transform(tsc, &palmte_pointercal);
}

static struct {
    int row;
    int column;
} palmte_keymap[0x80] = {
    [0 ... 0x7f] = { -1, -1 },
    [0x3b] = { 0, 0 },	/* F1	-> Calendar */
    [0x3c] = { 1, 0 },	/* F2	-> Contacts */
    [0x3d] = { 2, 0 },	/* F3	-> Tasks List */
    [0x3e] = { 3, 0 },	/* F4	-> Note Pad */
    [0x01] = { 4, 0 },	/* Esc	-> Power */
    [0x4b] = { 0, 1 },	/* 	   Left */
    [0x50] = { 1, 1 },	/* 	   Down */
    [0x48] = { 2, 1 },	/*	   Up */
    [0x4d] = { 3, 1 },	/*	   Right */
    [0x4c] = { 4, 1 },	/* 	   Centre */
    [0x39] = { 4, 1 },	/* Spc	-> Centre */
};

static void palmte_button_event(void *opaque, int keycode)
{
    struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque;

    if (palmte_keymap[keycode & 0x7f].row != -1)
        omap_mpuio_key(cpu->mpuio,
                        palmte_keymap[keycode & 0x7f].row,
                        palmte_keymap[keycode & 0x7f].column,
                        !(keycode & 0x80));
}

static void palmte_onoff_gpios(void *opaque, int line, int level)
{
    switch (line) {
    case 0:
        printf("%s: current to MMC/SD card %sabled.\n",
                        __FUNCTION__, level ? "dis" : "en");
        break;
    case 1:
        printf("%s: internal speaker amplifier %s.\n",
                        __FUNCTION__, level ? "down" : "on");
        break;

    /* These LCD & Audio output signals have not been identified yet.  */
    case 2:
    case 3:
    case 4:
        printf("%s: LCD GPIO%i %s.\n",
                        __FUNCTION__, line - 1, level ? "high" : "low");
        break;
    case 5:
    case 6:
        printf("%s: Audio GPIO%i %s.\n",
                        __FUNCTION__, line - 4, level ? "high" : "low");
        break;
    }
}

static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
{
    qemu_irq *misc_gpio;

    omap_mmc_handlers(cpu->mmc,
                    omap_gpio_in_get(cpu->gpio)[PALMTE_MMC_WP_GPIO],
                    qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
                            [PALMTE_MMC_SWITCH_GPIO]));

    misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
    omap_gpio_out_set(cpu->gpio, PALMTE_MMC_POWER_GPIO,	misc_gpio[0]);
    omap_gpio_out_set(cpu->gpio, PALMTE_SPEAKER_GPIO,	misc_gpio[1]);
    omap_gpio_out_set(cpu->gpio, 11,			misc_gpio[2]);
    omap_gpio_out_set(cpu->gpio, 12,			misc_gpio[3]);
    omap_gpio_out_set(cpu->gpio, 13,			misc_gpio[4]);
    omap_mpuio_out_set(cpu->mpuio, 1,			misc_gpio[5]);
    omap_mpuio_out_set(cpu->mpuio, 3,			misc_gpio[6]);

    /* Reset some inputs to initial state.  */
    qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USBDETECT_GPIO]);
    qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USB_OR_DC_GPIO]);
    qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[4]);
    qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_HEADPHONES_GPIO]);
    qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
}

static struct arm_boot_info palmte_binfo = {
    .loader_start = OMAP_EMIFF_BASE,
    .ram_size = 0x02000000,
    .board_id = 0x331,
};

static void palmte_init(ram_addr_t ram_size,
                const char *boot_device,
                const char *kernel_filename, const char *kernel_cmdline,
                const char *initrd_filename, const char *cpu_model)
{
    struct omap_mpu_state_s *cpu;
    int flash_size = 0x00800000;
    int sdram_size = palmte_binfo.ram_size;
    int io;
    static uint32_t cs0val = 0xffffffff;
    static uint32_t cs1val = 0x0000e1a0;
    static uint32_t cs2val = 0x0000e1a0;
    static uint32_t cs3val = 0xe1a0e1a0;
    ram_addr_t phys_flash;
    int rom_size, rom_loaded = 0;
    DisplayState *ds = get_displaystate();

    cpu = omap310_mpu_init(sdram_size, cpu_model);

    /* External Flash (EMIFS) */
    cpu_register_physical_memory(OMAP_CS0_BASE, flash_size,
                    (phys_flash = qemu_ram_alloc(flash_size)) | IO_MEM_ROM);

    io = cpu_register_io_memory(static_readfn, static_writefn, &cs0val);
    cpu_register_physical_memory(OMAP_CS0_BASE + flash_size,
                    OMAP_CS0_SIZE - flash_size, io);
    io = cpu_register_io_memory(static_readfn, static_writefn, &cs1val);
    cpu_register_physical_memory(OMAP_CS1_BASE, OMAP_CS1_SIZE, io);
    io = cpu_register_io_memory(static_readfn, static_writefn, &cs2val);
    cpu_register_physical_memory(OMAP_CS2_BASE, OMAP_CS2_SIZE, io);
    io = cpu_register_io_memory(static_readfn, static_writefn, &cs3val);
    cpu_register_physical_memory(OMAP_CS3_BASE, OMAP_CS3_SIZE, io);

    palmte_microwire_setup(cpu);

    qemu_add_kbd_event_handler(palmte_button_event, cpu);

    palmte_gpio_setup(cpu);

    /* Setup initial (reset) machine state */
    if (nb_option_roms) {
        rom_size = get_image_size(option_rom[0]);
        if (rom_size > flash_size) {
            fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
                            __FUNCTION__, rom_size, flash_size);
            rom_size = 0;
        }
        if (rom_size > 0) {
            rom_size = load_image_targphys(option_rom[0], OMAP_CS0_BASE,
                                           flash_size);
            rom_loaded = 1;
            cpu->env->regs[15] = 0x00000000;
        }
        if (rom_size < 0) {
            fprintf(stderr, "%s: error loading '%s'\n",
                            __FUNCTION__, option_rom[0]);
        }
    }

    if (!rom_loaded && !kernel_filename) {
        fprintf(stderr, "Kernel or ROM image must be specified\n");
        exit(1);
    }

    /* Load the kernel.  */
    if (kernel_filename) {
        /* Start at bootloader.  */
        cpu->env->regs[15] = palmte_binfo.loader_start;

        palmte_binfo.kernel_filename = kernel_filename;
        palmte_binfo.kernel_cmdline = kernel_cmdline;
        palmte_binfo.initrd_filename = initrd_filename;
        arm_load_kernel(cpu->env, &palmte_binfo);
    }

    /* FIXME: We shouldn't really be doing this here.  The LCD controller
       will set the size once configured, so this just sets an initial
       size until the guest activates the display.  */
    ds->surface = qemu_resize_displaysurface(ds, 320, 320);
    dpy_resize(ds);
}

static QEMUMachine palmte_machine = {
    .name = "cheetah",
    .desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",
    .init = palmte_init,
};

static void palmte_machine_init(void)
{
    qemu_register_machine(&palmte_machine);
}

machine_init(palmte_machine_init);
Commit	Line	Data
c3d2689d AZ	1	/*
	2	* PalmOne's (TM) PDAs.
	3	*
	4	* Copyright (C) 2006-2007 Andrzej Zaborowski <[email protected]>
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public License as
827df9f3 AZ	8	* published by the Free Software Foundation; either version 2 or
827df9f3 AZ	9	* (at your option) version 3 of the License.
c3d2689d AZ	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
fad6cb1a	16	* You should have received a copy of the GNU General Public License along
8167ee88	17	* with this program; if not, see <http://www.gnu.org/licenses/>.
c3d2689d	18	*/
87ecb68b PB	19	#include "hw.h"
	20	#include "audio/audio.h"
	21	#include "sysemu.h"
	22	#include "console.h"
	23	#include "omap.h"
	24	#include "boards.h"
	25	#include "arm-misc.h"
827df9f3	26	#include "devices.h"
c3d2689d AZ	27
	28	static uint32_t static_readb(void *opaque, target_phys_addr_t offset)
	29	{
	30	uint32_t val = (uint32_t ) opaque;
	31	return *val >> ((offset & 3) << 3);
	32	}
	33
827df9f3 AZ	34	static uint32_t static_readh(void *opaque, target_phys_addr_t offset)
827df9f3 AZ	35	{
c3d2689d AZ	36	uint32_t val = (uint32_t ) opaque;
	37	return *val >> ((offset & 1) << 3);
	38	}
	39
827df9f3 AZ	40	static uint32_t static_readw(void *opaque, target_phys_addr_t offset)
827df9f3 AZ	41	{
c3d2689d AZ	42	uint32_t val = (uint32_t ) opaque;
	43	return *val >> ((offset & 0) << 3);
	44	}
	45
	46	static void static_write(void *opaque, target_phys_addr_t offset,
d951f6ff AZ	47	uint32_t value)
d951f6ff AZ	48	{
c3d2689d AZ	49	#ifdef SPY
	50	printf("%s: value %08lx written at " PA_FMT "\n",
	51	__FUNCTION__, value, offset);
	52	#endif
	53	}
	54
d60efc6b	55	static CPUReadMemoryFunc * const static_readfn[] = {
c3d2689d AZ	56	static_readb,
	57	static_readh,
	58	static_readw,
	59	};
	60
d60efc6b	61	static CPUWriteMemoryFunc * const static_writefn[] = {
c3d2689d AZ	62	static_write,
	63	static_write,
	64	static_write,
	65	};
	66
	67	/* Palm Tunsgten\|E support */
8e129e07 AZ	68
	69	/* Shared GPIOs */
	70	#define PALMTE_USBDETECT_GPIO 0
	71	#define PALMTE_USB_OR_DC_GPIO 1
	72	#define PALMTE_TSC_GPIO 4
	73	#define PALMTE_PINTDAV_GPIO 6
	74	#define PALMTE_MMC_WP_GPIO 8
	75	#define PALMTE_MMC_POWER_GPIO 9
	76	#define PALMTE_HDQ_GPIO 11
	77	#define PALMTE_HEADPHONES_GPIO 14
	78	#define PALMTE_SPEAKER_GPIO 15
	79	/* MPU private GPIOs */
	80	#define PALMTE_DC_GPIO 2
	81	#define PALMTE_MMC_SWITCH_GPIO 4
	82	#define PALMTE_MMC1_GPIO 6
	83	#define PALMTE_MMC2_GPIO 7
	84	#define PALMTE_MMC3_GPIO 11
	85
bc24a225	86	static MouseTransformInfo palmte_pointercal = {
c38b6e25 AZ	87	.x = 320,
	88	.y = 320,
	89	.a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
	90	};
	91
c3d2689d AZ	92	static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
c3d2689d AZ	93	{
bc24a225	94	uWireSlave *tsc;
d8f699cb	95
22d83b14	96	tsc = tsc2102_init(omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO]);
d8f699cb AZ	97
	98	omap_uwire_attach(cpu->microwire, tsc, 0);
	99	omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));
c38b6e25 AZ	100
c38b6e25 AZ	101	tsc210x_set_transform(tsc, &palmte_pointercal);
c3d2689d AZ	102	}
c3d2689d AZ	103
38a34e1d AZ	104	static struct {
	105	int row;
	106	int column;
	107	} palmte_keymap[0x80] = {
	108	[0 ... 0x7f] = { -1, -1 },
	109	[0x3b] = { 0, 0 }, /* F1 -> Calendar */
	110	[0x3c] = { 1, 0 }, /* F2 -> Contacts */
	111	[0x3d] = { 2, 0 }, /* F3 -> Tasks List */
	112	[0x3e] = { 3, 0 }, /* F4 -> Note Pad */
	113	[0x01] = { 4, 0 }, /* Esc -> Power */
	114	[0x4b] = { 0, 1 }, /* Left */
	115	[0x50] = { 1, 1 }, /* Down */
	116	[0x48] = { 2, 1 }, /* Up */
	117	[0x4d] = { 3, 1 }, /* Right */
	118	[0x4c] = { 4, 1 }, /* Centre */
	119	[0x39] = { 4, 1 }, /* Spc -> Centre */
	120	};
	121
	122	static void palmte_button_event(void *opaque, int keycode)
	123	{
	124	struct omap_mpu_state_s cpu = (struct omap_mpu_state_s ) opaque;
	125
	126	if (palmte_keymap[keycode & 0x7f].row != -1)
	127	omap_mpuio_key(cpu->mpuio,
	128	palmte_keymap[keycode & 0x7f].row,
	129	palmte_keymap[keycode & 0x7f].column,
	130	!(keycode & 0x80));
	131	}
	132
7fc42b4b AZ	133	static void palmte_onoff_gpios(void *opaque, int line, int level)
	134	{
	135	switch (line) {
	136	case 0:
	137	printf("%s: current to MMC/SD card %sabled.\n",
	138	__FUNCTION__, level ? "dis" : "en");
	139	break;
	140	case 1:
	141	printf("%s: internal speaker amplifier %s.\n",
	142	__FUNCTION__, level ? "down" : "on");
	143	break;
	144
	145	/* These LCD & Audio output signals have not been identified yet. */
	146	case 2:
	147	case 3:
	148	case 4:
	149	printf("%s: LCD GPIO%i %s.\n",
	150	__FUNCTION__, line - 1, level ? "high" : "low");
	151	break;
	152	case 5:
	153	case 6:
	154	printf("%s: Audio GPIO%i %s.\n",
	155	__FUNCTION__, line - 4, level ? "high" : "low");
	156	break;
	157	}
	158	}
	159
	160	static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
	161	{
	162	qemu_irq *misc_gpio;
	163
	164	omap_mmc_handlers(cpu->mmc,
	165	omap_gpio_in_get(cpu->gpio)[PALMTE_MMC_WP_GPIO],
	166	qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
	167	[PALMTE_MMC_SWITCH_GPIO]));
	168
	169	misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
	170	omap_gpio_out_set(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]);
	171	omap_gpio_out_set(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]);
	172	omap_gpio_out_set(cpu->gpio, 11, misc_gpio[2]);
	173	omap_gpio_out_set(cpu->gpio, 12, misc_gpio[3]);
	174	omap_gpio_out_set(cpu->gpio, 13, misc_gpio[4]);
	175	omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]);
	176	omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]);
	177
	178	/* Reset some inputs to initial state. */
	179	qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USBDETECT_GPIO]);
	180	qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USB_OR_DC_GPIO]);
	181	qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[4]);
	182	qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_HEADPHONES_GPIO]);
	183	qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
	184	qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
	185	qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
	186	qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
	187	}
	188
f93eb9ff AZ	189	static struct arm_boot_info palmte_binfo = {
	190	.loader_start = OMAP_EMIFF_BASE,
	191	.ram_size = 0x02000000,
	192	.board_id = 0x331,
	193	};
	194
fbe1b595	195	static void palmte_init(ram_addr_t ram_size,
3023f332	196	const char *boot_device,
c3d2689d AZ	197	const char kernel_filename, const char kernel_cmdline,
	198	const char initrd_filename, const char cpu_model)
	199	{
	200	struct omap_mpu_state_s *cpu;
	201	int flash_size = 0x00800000;
f93eb9ff	202	int sdram_size = palmte_binfo.ram_size;
c3d2689d AZ	203	int io;
	204	static uint32_t cs0val = 0xffffffff;
	205	static uint32_t cs1val = 0x0000e1a0;
	206	static uint32_t cs2val = 0x0000e1a0;
	207	static uint32_t cs3val = 0xe1a0e1a0;
	208	ram_addr_t phys_flash;
	209	int rom_size, rom_loaded = 0;
3023f332	210	DisplayState *ds = get_displaystate();
c3d2689d	211
3023f332	212	cpu = omap310_mpu_init(sdram_size, cpu_model);
c3d2689d AZ	213
	214	/* External Flash (EMIFS) */
	215	cpu_register_physical_memory(OMAP_CS0_BASE, flash_size,
	216	(phys_flash = qemu_ram_alloc(flash_size)) \| IO_MEM_ROM);
	217
1eed09cb	218	io = cpu_register_io_memory(static_readfn, static_writefn, &cs0val);
c3d2689d AZ	219	cpu_register_physical_memory(OMAP_CS0_BASE + flash_size,
c3d2689d AZ	220	OMAP_CS0_SIZE - flash_size, io);
1eed09cb	221	io = cpu_register_io_memory(static_readfn, static_writefn, &cs1val);
c3d2689d	222	cpu_register_physical_memory(OMAP_CS1_BASE, OMAP_CS1_SIZE, io);
1eed09cb	223	io = cpu_register_io_memory(static_readfn, static_writefn, &cs2val);
c3d2689d	224	cpu_register_physical_memory(OMAP_CS2_BASE, OMAP_CS2_SIZE, io);
1eed09cb	225	io = cpu_register_io_memory(static_readfn, static_writefn, &cs3val);
c3d2689d AZ	226	cpu_register_physical_memory(OMAP_CS3_BASE, OMAP_CS3_SIZE, io);
	227
	228	palmte_microwire_setup(cpu);
	229
38a34e1d AZ	230	qemu_add_kbd_event_handler(palmte_button_event, cpu);
38a34e1d AZ	231
7fc42b4b	232	palmte_gpio_setup(cpu);
8e129e07	233
c3d2689d AZ	234	/* Setup initial (reset) machine state */
	235	if (nb_option_roms) {
	236	rom_size = get_image_size(option_rom[0]);
dcac9679	237	if (rom_size > flash_size) {
c3d2689d AZ	238	fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
c3d2689d AZ	239	__FUNCTION__, rom_size, flash_size);
dcac9679 PB	240	rom_size = 0;
	241	}
	242	if (rom_size > 0) {
	243	rom_size = load_image_targphys(option_rom[0], OMAP_CS0_BASE,
	244	flash_size);
c3d2689d AZ	245	rom_loaded = 1;
c3d2689d AZ	246	cpu->env->regs[15] = 0x00000000;
dcac9679 PB	247	}
dcac9679 PB	248	if (rom_size < 0) {
c3d2689d AZ	249	fprintf(stderr, "%s: error loading '%s'\n",
c3d2689d AZ	250	__FUNCTION__, option_rom[0]);
dcac9679	251	}
c3d2689d AZ	252	}
	253
	254	if (!rom_loaded && !kernel_filename) {
	255	fprintf(stderr, "Kernel or ROM image must be specified\n");
	256	exit(1);
	257	}
	258
	259	/* Load the kernel. */
	260	if (kernel_filename) {
	261	/* Start at bootloader. */
f93eb9ff	262	cpu->env->regs[15] = palmte_binfo.loader_start;
c3d2689d	263
f93eb9ff AZ	264	palmte_binfo.kernel_filename = kernel_filename;
	265	palmte_binfo.kernel_cmdline = kernel_cmdline;
	266	palmte_binfo.initrd_filename = initrd_filename;
	267	arm_load_kernel(cpu->env, &palmte_binfo);
c3d2689d AZ	268	}
c3d2689d AZ	269
c60e08d9 PB	270	/* FIXME: We shouldn't really be doing this here. The LCD controller
	271	will set the size once configured, so this just sets an initial
	272	size until the guest activates the display. */
7b5d76da	273	ds->surface = qemu_resize_displaysurface(ds, 320, 320);
7d957bd8	274	dpy_resize(ds);
c3d2689d AZ	275	}
c3d2689d AZ	276
f80f9ec9	277	static QEMUMachine palmte_machine = {
4b32e168 AL	278	.name = "cheetah",
	279	.desc = "Palm Tungsten\|E aka. Cheetah PDA (OMAP310)",
	280	.init = palmte_init,
c3d2689d	281	};
f80f9ec9 AL	282
	283	static void palmte_machine_init(void)
	284	{
	285	qemu_register_machine(&palmte_machine);
	286	}
	287
	288	machine_init(palmte_machine_init);