projects / qemu.git / blame
| Commit | Line | Data |
|---|---|---|
| 87e0331c | 1 | # See docs/devel/tracing.txt for syntax documentation. |
| 732d8314 | 2 | |
| 500016e5 | 3 | # parallel.c |
| cb2d721c PMD |
4 | parallel_ioport_read(const char *desc, uint16_t addr, uint8_t value) "read [%s] addr 0x%02x val 0x%02x" |
| 5 | parallel_ioport_write(const char *desc, uint16_t addr, uint8_t value) "write [%s] addr 0x%02x val 0x%02x" | |
| 6 | ||
| 500016e5 | 7 | # serial.c |
| 00609186 PMD |
8 | serial_ioport_read(uint16_t addr, uint8_t value) "read addr 0x%02x val 0x%02x" |
| 9 | serial_ioport_write(uint16_t addr, uint8_t value) "write addr 0x%02x val 0x%02x" | |
| 10 | ||
| 500016e5 | 11 | # virtio-serial-bus.c |
| 732d8314 DB |
12 | virtio_serial_send_control_event(unsigned int port, uint16_t event, uint16_t value) "port %u, event %u, value %u" |
| 13 | virtio_serial_throttle_port(unsigned int port, bool throttle) "port %u, throttle %d" | |
| 14 | virtio_serial_handle_control_message(uint16_t event, uint16_t value) "event %u, value %u" | |
| 15 | virtio_serial_handle_control_message_port(unsigned int port) "port %u" | |
| 16 | ||
| 500016e5 | 17 | # virtio-console.c |
| 732d8314 DB |
18 | virtio_console_flush_buf(unsigned int port, size_t len, ssize_t ret) "port %u, in_len %zu, out_len %zd" |
| 19 | virtio_console_chr_read(unsigned int port, int size) "port %u, size %d" | |
| 20 | virtio_console_chr_event(unsigned int port, int event) "port %u, event %d" | |
| 21 | ||
| 500016e5 | 22 | # grlib_apbuart.c |
| 732d8314 DB |
23 | grlib_apbuart_event(int event) "event:%d" |
| 24 | grlib_apbuart_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x" | |
| 25 | grlib_apbuart_readl_unknown(uint64_t addr) "addr 0x%"PRIx64 | |
| 26 | ||
| 500016e5 | 27 | # lm32_juart.c |
| 732d8314 DB |
28 | lm32_juart_get_jtx(uint32_t value) "jtx 0x%08x" |
| 29 | lm32_juart_set_jtx(uint32_t value) "jtx 0x%08x" | |
| 30 | lm32_juart_get_jrx(uint32_t value) "jrx 0x%08x" | |
| 31 | lm32_juart_set_jrx(uint32_t value) "jrx 0x%08x" | |
| 32 | ||
| 500016e5 | 33 | # lm32_uart.c |
| 732d8314 DB |
34 | lm32_uart_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" |
| 35 | lm32_uart_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" | |
| 36 | lm32_uart_irq_state(int level) "irq state %d" | |
| 37 | ||
| 500016e5 | 38 | # milkymist-uart.c |
| 8908eb1a VSO |
39 | milkymist_uart_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" |
| 40 | milkymist_uart_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" | |
| 732d8314 DB |
41 | milkymist_uart_raise_irq(void) "Raise IRQ" |
| 42 | milkymist_uart_lower_irq(void) "Lower IRQ" | |
| 43 | ||
| 500016e5 | 44 | # escc.c |
| 732d8314 DB |
45 | escc_put_queue(char channel, int b) "channel %c put: 0x%02x" |
| 46 | escc_get_queue(char channel, int val) "channel %c get 0x%02x" | |
| 47 | escc_update_irq(int irq) "IRQ = %d" | |
| 48 | escc_update_parameters(char channel, int speed, int parity, int data_bits, int stop_bits) "channel %c: speed=%d parity=%c data=%d stop=%d" | |
| 8908eb1a | 49 | escc_mem_writeb_ctrl(char channel, uint32_t reg, uint32_t val) "Write channel %c, reg[%d] = 0x%2.2x" |
| 732d8314 | 50 | escc_mem_writeb_data(char channel, uint32_t val) "Write channel %c, ch %d" |
| 8908eb1a | 51 | escc_mem_readb_ctrl(char channel, uint32_t reg, uint8_t val) "Read channel %c, reg[%d] = 0x%2.2x" |
| 732d8314 DB |
52 | escc_mem_readb_data(char channel, uint32_t ret) "Read channel %c, ch %d" |
| 53 | escc_serial_receive_byte(char channel, int ch) "channel %c put ch %d" | |
| 54 | escc_sunkbd_event_in(int ch, const char *name, int down) "QKeyCode 0x%2.2x [%s], down %d" | |
| 55 | escc_sunkbd_event_out(int ch) "Translated keycode 0x%2.2x" | |
| 56 | escc_kbd_command(int val) "Command %d" | |
| 8908eb1a | 57 | escc_sunmouse_event(int dx, int dy, int buttons_state) "dx=%d dy=%d buttons=0x%01x" |
| 041ac056 | 58 | |
| 500016e5 | 59 | # pl011.c |
| 041ac056 PM |
60 | pl011_irq_state(int level) "irq state %d" |
| 61 | pl011_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" | |
| 62 | pl011_read_fifo(int read_count) "FIFO read, read_count now %d" | |
| 63 | pl011_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" | |
| 8908eb1a | 64 | pl011_can_receive(uint32_t lcr, int read_count, int r) "LCR 0x%08x read_count %d returning %d" |
| 041ac056 PM |
65 | pl011_put_fifo(uint32_t c, int read_count) "new char 0x%x read_count now %d" |
| 66 | pl011_put_fifo_full(void) "FIFO now full, RXFF set" | |
| 775df84e | 67 | |
| dec97760 | 68 | # cmsdk-apb-uart.c |
| 775df84e PM |
69 | cmsdk_apb_uart_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" |
| 70 | cmsdk_apb_uart_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" | |
| 71 | cmsdk_apb_uart_reset(void) "CMSDK APB UART: reset" | |
| 72 | cmsdk_apb_uart_receive(uint8_t c) "CMSDK APB UART: got character 0x%x from backend" | |
| 73 | cmsdk_apb_uart_tx_pending(void) "CMSDK APB UART: character send to backend pending" | |
| 74 | cmsdk_apb_uart_tx(uint8_t c) "CMSDK APB UART: character 0x%x sent to backend" | |
| 75 | cmsdk_apb_uart_set_params(int speed) "CMSDK APB UART: params set to %d 8N1" | |
| 19790847 | 76 | |
| 500016e5 | 77 | # nrf51_uart.c |
| 19790847 JS |
78 | nrf51_uart_read(uint64_t addr, uint64_t r, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u" |
| 79 | nrf51_uart_write(uint64_t addr, uint64_t value, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u" |