[qemu.git] / hw / arm / palm.c

/*
 * PalmOne's (TM) PDAs.
 *
 * Copyright (C) 2006-2007 Andrzej Zaborowski  <[email protected]>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 or
 * (at your option) version 3 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, see <http://www.gnu.org/licenses/>.
 */
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/hw.h"
#include "audio/audio.h"
#include "sysemu/sysemu.h"
#include "sysemu/qtest.h"
#include "ui/console.h"
#include "hw/arm/omap.h"
#include "hw/boards.h"
#include "hw/arm/arm.h"
#include "hw/devices.h"
#include "hw/loader.h"
#include "exec/address-spaces.h"
#include "cpu.h"

static uint64_t static_read(void *opaque, hwaddr offset, unsigned size)
{
    uint32_t *val = (uint32_t *)opaque;
    uint32_t sizemask = 7 >> size;

    return *val >> ((offset & sizemask) << 3);
}

static void static_write(void *opaque, hwaddr offset, uint64_t value,
                         unsigned size)
{
#ifdef SPY
    printf("%s: value %08lx written at " PA_FMT "\n",
                    __func__, value, offset);
#endif
}

static const MemoryRegionOps static_ops = {
    .read = static_read,
    .write = static_write,
    .valid.min_access_size = 1,
    .valid.max_access_size = 4,
    .endianness = DEVICE_NATIVE_ENDIAN,
};

/* Palm Tunsgten|E support */

/* Shared GPIOs */
#define PALMTE_USBDETECT_GPIO	0
#define PALMTE_USB_OR_DC_GPIO	1
#define PALMTE_TSC_GPIO		4
#define PALMTE_PINTDAV_GPIO	6
#define PALMTE_MMC_WP_GPIO	8
#define PALMTE_MMC_POWER_GPIO	9
#define PALMTE_HDQ_GPIO		11
#define PALMTE_HEADPHONES_GPIO	14
#define PALMTE_SPEAKER_GPIO	15
/* MPU private GPIOs */
#define PALMTE_DC_GPIO		2
#define PALMTE_MMC_SWITCH_GPIO	4
#define PALMTE_MMC1_GPIO	6
#define PALMTE_MMC2_GPIO	7
#define PALMTE_MMC3_GPIO	11

static MouseTransformInfo palmte_pointercal = {
    .x = 320,
    .y = 320,
    .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
};

static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
{
    uWireSlave *tsc;

    tsc = tsc2102_init(qdev_get_gpio_in(cpu->gpio, PALMTE_PINTDAV_GPIO));

    omap_uwire_attach(cpu->microwire, tsc, 0);
    omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));

    tsc210x_set_transform(tsc, &palmte_pointercal);
}

static struct {
    int row;
    int column;
} palmte_keymap[0x80] = {
    [0 ... 0x7f] = { -1, -1 },
    [0x3b] = { 0, 0 },	/* F1	-> Calendar */
    [0x3c] = { 1, 0 },	/* F2	-> Contacts */
    [0x3d] = { 2, 0 },	/* F3	-> Tasks List */
    [0x3e] = { 3, 0 },	/* F4	-> Note Pad */
    [0x01] = { 4, 0 },	/* Esc	-> Power */
    [0x4b] = { 0, 1 },	/* 	   Left */
    [0x50] = { 1, 1 },	/* 	   Down */
    [0x48] = { 2, 1 },	/*	   Up */
    [0x4d] = { 3, 1 },	/*	   Right */
    [0x4c] = { 4, 1 },	/* 	   Centre */
    [0x39] = { 4, 1 },	/* Spc	-> Centre */
};

static void palmte_button_event(void *opaque, int keycode)
{
    struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque;

    if (palmte_keymap[keycode & 0x7f].row != -1)
        omap_mpuio_key(cpu->mpuio,
                        palmte_keymap[keycode & 0x7f].row,
                        palmte_keymap[keycode & 0x7f].column,
                        !(keycode & 0x80));
}

static void palmte_onoff_gpios(void *opaque, int line, int level)
{
    switch (line) {
    case 0:
        printf("%s: current to MMC/SD card %sabled.\n",
                        __func__, level ? "dis" : "en");
        break;
    case 1:
        printf("%s: internal speaker amplifier %s.\n",
                        __func__, level ? "down" : "on");
        break;

    /* These LCD & Audio output signals have not been identified yet.  */
    case 2:
    case 3:
    case 4:
        printf("%s: LCD GPIO%i %s.\n",
                        __func__, line - 1, level ? "high" : "low");
        break;
    case 5:
    case 6:
        printf("%s: Audio GPIO%i %s.\n",
                        __func__, line - 4, level ? "high" : "low");
        break;
    }
}

static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
{
    qemu_irq *misc_gpio;

    omap_mmc_handlers(cpu->mmc,
                    qdev_get_gpio_in(cpu->gpio, PALMTE_MMC_WP_GPIO),
                    qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
                            [PALMTE_MMC_SWITCH_GPIO]));

    misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
    qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO,	misc_gpio[0]);
    qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO,	misc_gpio[1]);
    qdev_connect_gpio_out(cpu->gpio, 11,			misc_gpio[2]);
    qdev_connect_gpio_out(cpu->gpio, 12,			misc_gpio[3]);
    qdev_connect_gpio_out(cpu->gpio, 13,			misc_gpio[4]);
    omap_mpuio_out_set(cpu->mpuio, 1,				misc_gpio[5]);
    omap_mpuio_out_set(cpu->mpuio, 3,				misc_gpio[6]);

    /* Reset some inputs to initial state.  */
    qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO));
    qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USB_OR_DC_GPIO));
    qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, 4));
    qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_HEADPHONES_GPIO));
    qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
    qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
}

static struct arm_boot_info palmte_binfo = {
    .loader_start = OMAP_EMIFF_BASE,
    .ram_size = 0x02000000,
    .board_id = 0x331,
};

static void palmte_init(MachineState *machine)
{
    const char *kernel_filename = machine->kernel_filename;
    const char *kernel_cmdline = machine->kernel_cmdline;
    const char *initrd_filename = machine->initrd_filename;
    MemoryRegion *address_space_mem = get_system_memory();
    struct omap_mpu_state_s *mpu;
    int flash_size = 0x00800000;
    int sdram_size = palmte_binfo.ram_size;
    static uint32_t cs0val = 0xffffffff;
    static uint32_t cs1val = 0x0000e1a0;
    static uint32_t cs2val = 0x0000e1a0;
    static uint32_t cs3val = 0xe1a0e1a0;
    int rom_size, rom_loaded = 0;
    MemoryRegion *flash = g_new(MemoryRegion, 1);
    MemoryRegion *cs = g_new(MemoryRegion, 4);

    mpu = omap310_mpu_init(address_space_mem, sdram_size, machine->cpu_type);

    /* External Flash (EMIFS) */
    memory_region_init_ram(flash, NULL, "palmte.flash", flash_size,
                           &error_fatal);
    memory_region_set_readonly(flash, true);
    memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE, flash);

    memory_region_init_io(&cs[0], NULL, &static_ops, &cs0val, "palmte-cs0",
                          OMAP_CS0_SIZE - flash_size);
    memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE + flash_size,
                                &cs[0]);
    memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, "palmte-cs1",
                          OMAP_CS1_SIZE);
    memory_region_add_subregion(address_space_mem, OMAP_CS1_BASE, &cs[1]);
    memory_region_init_io(&cs[2], NULL, &static_ops, &cs2val, "palmte-cs2",
                          OMAP_CS2_SIZE);
    memory_region_add_subregion(address_space_mem, OMAP_CS2_BASE, &cs[2]);
    memory_region_init_io(&cs[3], NULL, &static_ops, &cs3val, "palmte-cs3",
                          OMAP_CS3_SIZE);
    memory_region_add_subregion(address_space_mem, OMAP_CS3_BASE, &cs[3]);

    palmte_microwire_setup(mpu);

    qemu_add_kbd_event_handler(palmte_button_event, mpu);

    palmte_gpio_setup(mpu);

    /* Setup initial (reset) machine state */
    if (nb_option_roms) {
        rom_size = get_image_size(option_rom[0].name);
        if (rom_size > flash_size) {
            fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
                            __func__, rom_size, flash_size);
            rom_size = 0;
        }
        if (rom_size > 0) {
            rom_size = load_image_targphys(option_rom[0].name, OMAP_CS0_BASE,
                                           flash_size);
            rom_loaded = 1;
        }
        if (rom_size < 0) {
            fprintf(stderr, "%s: error loading '%s'\n",
                            __func__, option_rom[0].name);
        }
    }

    if (!rom_loaded && !kernel_filename && !qtest_enabled()) {
        fprintf(stderr, "Kernel or ROM image must be specified\n");
        exit(1);
    }

    /* Load the kernel.  */
    palmte_binfo.kernel_filename = kernel_filename;
    palmte_binfo.kernel_cmdline = kernel_cmdline;
    palmte_binfo.initrd_filename = initrd_filename;
    arm_load_kernel(mpu->cpu, &palmte_binfo);
}

static void palmte_machine_init(MachineClass *mc)
{
    mc->desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)";
    mc->init = palmte_init;
    mc->ignore_memory_transaction_failures = true;
    mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t");
}

DEFINE_MACHINE("cheetah", palmte_machine_init)
Commit	Line	Data
c3d2689d AZ	1	/*
	2	* PalmOne's (TM) PDAs.
	3	*
	4	* Copyright (C) 2006-2007 Andrzej Zaborowski <[email protected]>
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public License as
827df9f3 AZ	8	* published by the Free Software Foundation; either version 2 or
827df9f3 AZ	9	* (at your option) version 3 of the License.
c3d2689d AZ	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
fad6cb1a	16	* You should have received a copy of the GNU General Public License along
8167ee88	17	* with this program; if not, see <http://www.gnu.org/licenses/>.
c3d2689d	18	*/
12b16722	19	#include "qemu/osdep.h"
da34e65c	20	#include "qapi/error.h"
83c9f4ca	21	#include "hw/hw.h"
87ecb68b	22	#include "audio/audio.h"
9c17d615	23	#include "sysemu/sysemu.h"
1ca8334e	24	#include "sysemu/qtest.h"
28ecbaee	25	#include "ui/console.h"
0d09e41a	26	#include "hw/arm/omap.h"
83c9f4ca	27	#include "hw/boards.h"
bd2be150 PM	28	#include "hw/arm/arm.h"
bd2be150 PM	29	#include "hw/devices.h"
83c9f4ca	30	#include "hw/loader.h"
022c62cb	31	#include "exec/address-spaces.h"
ba1ba5cc	32	#include "cpu.h"
c3d2689d	33
7b675f1f	34	static uint64_t static_read(void *opaque, hwaddr offset, unsigned size)
c3d2689d	35	{
7b675f1f PM	36	uint32_t val = (uint32_t )opaque;
7b675f1f PM	37	uint32_t sizemask = 7 >> size;
c3d2689d	38
7b675f1f	39	return *val >> ((offset & sizemask) << 3);
c3d2689d AZ	40	}
c3d2689d AZ	41
7b675f1f PM	42	static void static_write(void *opaque, hwaddr offset, uint64_t value,
7b675f1f PM	43	unsigned size)
d951f6ff	44	{
c3d2689d AZ	45	#ifdef SPY
c3d2689d AZ	46	printf("%s: value %08lx written at " PA_FMT "\n",
a89f364a	47	__func__, value, offset);
c3d2689d AZ	48	#endif
	49	}
	50
ced52fa6	51	static const MemoryRegionOps static_ops = {
7b675f1f PM	52	.read = static_read,
	53	.write = static_write,
	54	.valid.min_access_size = 1,
	55	.valid.max_access_size = 4,
ced52fa6	56	.endianness = DEVICE_NATIVE_ENDIAN,
c3d2689d AZ	57	};
	58
	59	/* Palm Tunsgten\|E support */
8e129e07 AZ	60
	61	/* Shared GPIOs */
	62	#define PALMTE_USBDETECT_GPIO 0
	63	#define PALMTE_USB_OR_DC_GPIO 1
	64	#define PALMTE_TSC_GPIO 4
	65	#define PALMTE_PINTDAV_GPIO 6
	66	#define PALMTE_MMC_WP_GPIO 8
	67	#define PALMTE_MMC_POWER_GPIO 9
	68	#define PALMTE_HDQ_GPIO 11
	69	#define PALMTE_HEADPHONES_GPIO 14
	70	#define PALMTE_SPEAKER_GPIO 15
	71	/* MPU private GPIOs */
	72	#define PALMTE_DC_GPIO 2
	73	#define PALMTE_MMC_SWITCH_GPIO 4
	74	#define PALMTE_MMC1_GPIO 6
	75	#define PALMTE_MMC2_GPIO 7
	76	#define PALMTE_MMC3_GPIO 11
	77
bc24a225	78	static MouseTransformInfo palmte_pointercal = {
c38b6e25 AZ	79	.x = 320,
	80	.y = 320,
	81	.a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
	82	};
	83
c3d2689d AZ	84	static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
c3d2689d AZ	85	{
bc24a225	86	uWireSlave *tsc;
d8f699cb	87
77831c20	88	tsc = tsc2102_init(qdev_get_gpio_in(cpu->gpio, PALMTE_PINTDAV_GPIO));
d8f699cb AZ	89
	90	omap_uwire_attach(cpu->microwire, tsc, 0);
	91	omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));
c38b6e25 AZ	92
c38b6e25 AZ	93	tsc210x_set_transform(tsc, &palmte_pointercal);
c3d2689d AZ	94	}
c3d2689d AZ	95
38a34e1d AZ	96	static struct {
	97	int row;
	98	int column;
	99	} palmte_keymap[0x80] = {
	100	[0 ... 0x7f] = { -1, -1 },
	101	[0x3b] = { 0, 0 }, /* F1 -> Calendar */
	102	[0x3c] = { 1, 0 }, /* F2 -> Contacts */
	103	[0x3d] = { 2, 0 }, /* F3 -> Tasks List */
	104	[0x3e] = { 3, 0 }, /* F4 -> Note Pad */
	105	[0x01] = { 4, 0 }, /* Esc -> Power */
	106	[0x4b] = { 0, 1 }, /* Left */
	107	[0x50] = { 1, 1 }, /* Down */
	108	[0x48] = { 2, 1 }, /* Up */
	109	[0x4d] = { 3, 1 }, /* Right */
	110	[0x4c] = { 4, 1 }, /* Centre */
	111	[0x39] = { 4, 1 }, /* Spc -> Centre */
	112	};
	113
	114	static void palmte_button_event(void *opaque, int keycode)
	115	{
	116	struct omap_mpu_state_s cpu = (struct omap_mpu_state_s ) opaque;
	117
	118	if (palmte_keymap[keycode & 0x7f].row != -1)
	119	omap_mpuio_key(cpu->mpuio,
	120	palmte_keymap[keycode & 0x7f].row,
	121	palmte_keymap[keycode & 0x7f].column,
	122	!(keycode & 0x80));
	123	}
	124
7fc42b4b AZ	125	static void palmte_onoff_gpios(void *opaque, int line, int level)
	126	{
	127	switch (line) {
	128	case 0:
	129	printf("%s: current to MMC/SD card %sabled.\n",
a89f364a	130	__func__, level ? "dis" : "en");
7fc42b4b AZ	131	break;
	132	case 1:
	133	printf("%s: internal speaker amplifier %s.\n",
a89f364a	134	__func__, level ? "down" : "on");
7fc42b4b AZ	135	break;
	136
	137	/* These LCD & Audio output signals have not been identified yet. */
	138	case 2:
	139	case 3:
	140	case 4:
	141	printf("%s: LCD GPIO%i %s.\n",
a89f364a	142	__func__, line - 1, level ? "high" : "low");
7fc42b4b AZ	143	break;
	144	case 5:
	145	case 6:
	146	printf("%s: Audio GPIO%i %s.\n",
a89f364a	147	__func__, line - 4, level ? "high" : "low");
7fc42b4b AZ	148	break;
	149	}
	150	}
	151
	152	static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
	153	{
	154	qemu_irq *misc_gpio;
	155
	156	omap_mmc_handlers(cpu->mmc,
77831c20	157	qdev_get_gpio_in(cpu->gpio, PALMTE_MMC_WP_GPIO),
7fc42b4b AZ	158	qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
	159	[PALMTE_MMC_SWITCH_GPIO]));
	160
	161	misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
77831c20 JR	162	qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]);
	163	qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]);
	164	qdev_connect_gpio_out(cpu->gpio, 11, misc_gpio[2]);
	165	qdev_connect_gpio_out(cpu->gpio, 12, misc_gpio[3]);
	166	qdev_connect_gpio_out(cpu->gpio, 13, misc_gpio[4]);
	167	omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]);
	168	omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]);
7fc42b4b AZ	169
7fc42b4b AZ	170	/* Reset some inputs to initial state. */
77831c20 JR	171	qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO));
	172	qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USB_OR_DC_GPIO));
	173	qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, 4));
	174	qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_HEADPHONES_GPIO));
7fc42b4b AZ	175	qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
	176	qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
	177	qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
	178	qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
	179	}
	180
f93eb9ff AZ	181	static struct arm_boot_info palmte_binfo = {
	182	.loader_start = OMAP_EMIFF_BASE,
	183	.ram_size = 0x02000000,
	184	.board_id = 0x331,
	185	};
	186
3ef96221	187	static void palmte_init(MachineState *machine)
c3d2689d	188	{
3ef96221 MA	189	const char *kernel_filename = machine->kernel_filename;
	190	const char *kernel_cmdline = machine->kernel_cmdline;
	191	const char *initrd_filename = machine->initrd_filename;
4b3fedf3	192	MemoryRegion *address_space_mem = get_system_memory();
f1eea068	193	struct omap_mpu_state_s *mpu;
c3d2689d	194	int flash_size = 0x00800000;
f93eb9ff	195	int sdram_size = palmte_binfo.ram_size;
c3d2689d AZ	196	static uint32_t cs0val = 0xffffffff;
	197	static uint32_t cs1val = 0x0000e1a0;
	198	static uint32_t cs2val = 0x0000e1a0;
	199	static uint32_t cs3val = 0xe1a0e1a0;
c3d2689d	200	int rom_size, rom_loaded = 0;
ced52fa6 AK	201	MemoryRegion *flash = g_new(MemoryRegion, 1);
ced52fa6 AK	202	MemoryRegion *cs = g_new(MemoryRegion, 4);
c3d2689d	203
ba1ba5cc	204	mpu = omap310_mpu_init(address_space_mem, sdram_size, machine->cpu_type);
c3d2689d AZ	205
c3d2689d AZ	206	/* External Flash (EMIFS) */
98a99ce0	207	memory_region_init_ram(flash, NULL, "palmte.flash", flash_size,
f8ed85ac	208	&error_fatal);
ced52fa6 AK	209	memory_region_set_readonly(flash, true);
	210	memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE, flash);
	211
2c9b15ca	212	memory_region_init_io(&cs[0], NULL, &static_ops, &cs0val, "palmte-cs0",
ced52fa6 AK	213	OMAP_CS0_SIZE - flash_size);
	214	memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE + flash_size,
	215	&cs[0]);
2c9b15ca	216	memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, "palmte-cs1",
ced52fa6 AK	217	OMAP_CS1_SIZE);
ced52fa6 AK	218	memory_region_add_subregion(address_space_mem, OMAP_CS1_BASE, &cs[1]);
2c9b15ca	219	memory_region_init_io(&cs[2], NULL, &static_ops, &cs2val, "palmte-cs2",
ced52fa6 AK	220	OMAP_CS2_SIZE);
ced52fa6 AK	221	memory_region_add_subregion(address_space_mem, OMAP_CS2_BASE, &cs[2]);
2c9b15ca	222	memory_region_init_io(&cs[3], NULL, &static_ops, &cs3val, "palmte-cs3",
ced52fa6 AK	223	OMAP_CS3_SIZE);
ced52fa6 AK	224	memory_region_add_subregion(address_space_mem, OMAP_CS3_BASE, &cs[3]);
c3d2689d	225
f1eea068	226	palmte_microwire_setup(mpu);
c3d2689d	227
f1eea068	228	qemu_add_kbd_event_handler(palmte_button_event, mpu);
38a34e1d	229
f1eea068	230	palmte_gpio_setup(mpu);
8e129e07	231
c3d2689d AZ	232	/* Setup initial (reset) machine state */
c3d2689d AZ	233	if (nb_option_roms) {
2e55e842	234	rom_size = get_image_size(option_rom[0].name);
dcac9679	235	if (rom_size > flash_size) {
c3d2689d	236	fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
a89f364a	237	__func__, rom_size, flash_size);
dcac9679 PB	238	rom_size = 0;
	239	}
	240	if (rom_size > 0) {
2e55e842	241	rom_size = load_image_targphys(option_rom[0].name, OMAP_CS0_BASE,
dcac9679	242	flash_size);
c3d2689d	243	rom_loaded = 1;
dcac9679 PB	244	}
dcac9679 PB	245	if (rom_size < 0) {
c3d2689d	246	fprintf(stderr, "%s: error loading '%s'\n",
a89f364a	247	__func__, option_rom[0].name);
dcac9679	248	}
c3d2689d AZ	249	}
c3d2689d AZ	250
1ca8334e	251	if (!rom_loaded && !kernel_filename && !qtest_enabled()) {
c3d2689d AZ	252	fprintf(stderr, "Kernel or ROM image must be specified\n");
	253	exit(1);
	254	}
	255
	256	/* Load the kernel. */
dacecf54 PM	257	palmte_binfo.kernel_filename = kernel_filename;
	258	palmte_binfo.kernel_cmdline = kernel_cmdline;
	259	palmte_binfo.initrd_filename = initrd_filename;
	260	arm_load_kernel(mpu->cpu, &palmte_binfo);
c3d2689d AZ	261	}
c3d2689d AZ	262
e264d29d	263	static void palmte_machine_init(MachineClass *mc)
f80f9ec9	264	{
e264d29d EH	265	mc->desc = "Palm Tungsten\|E aka. Cheetah PDA (OMAP310)";
e264d29d EH	266	mc->init = palmte_init;
4672cbd7	267	mc->ignore_memory_transaction_failures = true;
ba1ba5cc	268	mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t");
f80f9ec9 AL	269	}
f80f9ec9 AL	270
e264d29d	271	DEFINE_MACHINE("cheetah", palmte_machine_init)