]>
Commit | Line | Data |
---|---|---|
d0f7453d HC |
1 | /* |
2 | * bonito north bridge support | |
3 | * | |
4 | * Copyright (c) 2008 yajin ([email protected]) | |
5 | * Copyright (c) 2010 Huacai Chen ([email protected]) | |
6 | * | |
7 | * This code is licensed under the GNU GPL v2. | |
8 | */ | |
9 | ||
10 | /* | |
11 | * fulong 2e mini pc has a bonito north bridge. | |
12 | */ | |
13 | ||
14 | /* what is the meaning of devfn in qemu and IDSEL in bonito northbridge? | |
15 | * | |
16 | * devfn pci_slot<<3 + funno | |
17 | * one pci bus can have 32 devices and each device can have 8 functions. | |
18 | * | |
19 | * In bonito north bridge, pci slot = IDSEL bit - 12. | |
20 | * For example, PCI_IDSEL_VIA686B = 17, | |
21 | * pci slot = 17-12=5 | |
22 | * | |
23 | * so | |
24 | * VT686B_FUN0's devfn = (5<<3)+0 | |
25 | * VT686B_FUN1's devfn = (5<<3)+1 | |
26 | * | |
27 | * qemu also uses pci address for north bridge to access pci config register. | |
28 | * bus_no [23:16] | |
29 | * dev_no [15:11] | |
30 | * fun_no [10:8] | |
31 | * reg_no [7:2] | |
32 | * | |
33 | * so function bonito_sbridge_pciaddr for the translation from | |
34 | * north bridge address to pci address. | |
35 | */ | |
36 | ||
37 | #include <assert.h> | |
38 | ||
39 | #include "hw.h" | |
40 | #include "pci.h" | |
41 | #include "pc.h" | |
42 | #include "mips.h" | |
43 | #include "pci_host.h" | |
44 | #include "sysemu.h" | |
1e39101c | 45 | #include "exec-memory.h" |
d0f7453d HC |
46 | |
47 | //#define DEBUG_BONITO | |
48 | ||
49 | #ifdef DEBUG_BONITO | |
50 | #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__) | |
51 | #else | |
52 | #define DPRINTF(fmt, ...) | |
53 | #endif | |
54 | ||
55 | /* from linux soure code. include/asm-mips/mips-boards/bonito64.h*/ | |
56 | #define BONITO_BOOT_BASE 0x1fc00000 | |
57 | #define BONITO_BOOT_SIZE 0x00100000 | |
58 | #define BONITO_BOOT_TOP (BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1) | |
59 | #define BONITO_FLASH_BASE 0x1c000000 | |
60 | #define BONITO_FLASH_SIZE 0x03000000 | |
61 | #define BONITO_FLASH_TOP (BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1) | |
62 | #define BONITO_SOCKET_BASE 0x1f800000 | |
63 | #define BONITO_SOCKET_SIZE 0x00400000 | |
64 | #define BONITO_SOCKET_TOP (BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1) | |
65 | #define BONITO_REG_BASE 0x1fe00000 | |
66 | #define BONITO_REG_SIZE 0x00040000 | |
67 | #define BONITO_REG_TOP (BONITO_REG_BASE+BONITO_REG_SIZE-1) | |
68 | #define BONITO_DEV_BASE 0x1ff00000 | |
69 | #define BONITO_DEV_SIZE 0x00100000 | |
70 | #define BONITO_DEV_TOP (BONITO_DEV_BASE+BONITO_DEV_SIZE-1) | |
71 | #define BONITO_PCILO_BASE 0x10000000 | |
72 | #define BONITO_PCILO_BASE_VA 0xb0000000 | |
73 | #define BONITO_PCILO_SIZE 0x0c000000 | |
74 | #define BONITO_PCILO_TOP (BONITO_PCILO_BASE+BONITO_PCILO_SIZE-1) | |
75 | #define BONITO_PCILO0_BASE 0x10000000 | |
76 | #define BONITO_PCILO1_BASE 0x14000000 | |
77 | #define BONITO_PCILO2_BASE 0x18000000 | |
78 | #define BONITO_PCIHI_BASE 0x20000000 | |
79 | #define BONITO_PCIHI_SIZE 0x20000000 | |
80 | #define BONITO_PCIHI_TOP (BONITO_PCIHI_BASE+BONITO_PCIHI_SIZE-1) | |
81 | #define BONITO_PCIIO_BASE 0x1fd00000 | |
82 | #define BONITO_PCIIO_BASE_VA 0xbfd00000 | |
83 | #define BONITO_PCIIO_SIZE 0x00010000 | |
84 | #define BONITO_PCIIO_TOP (BONITO_PCIIO_BASE+BONITO_PCIIO_SIZE-1) | |
85 | #define BONITO_PCICFG_BASE 0x1fe80000 | |
86 | #define BONITO_PCICFG_SIZE 0x00080000 | |
87 | #define BONITO_PCICFG_TOP (BONITO_PCICFG_BASE+BONITO_PCICFG_SIZE-1) | |
88 | ||
89 | ||
90 | #define BONITO_PCICONFIGBASE 0x00 | |
91 | #define BONITO_REGBASE 0x100 | |
92 | ||
93 | #define BONITO_PCICONFIG_BASE (BONITO_PCICONFIGBASE+BONITO_REG_BASE) | |
94 | #define BONITO_PCICONFIG_SIZE (0x100) | |
95 | ||
96 | #define BONITO_INTERNAL_REG_BASE (BONITO_REGBASE+BONITO_REG_BASE) | |
97 | #define BONITO_INTERNAL_REG_SIZE (0x70) | |
98 | ||
99 | #define BONITO_SPCICONFIG_BASE (BONITO_PCICFG_BASE) | |
100 | #define BONITO_SPCICONFIG_SIZE (BONITO_PCICFG_SIZE) | |
101 | ||
102 | ||
103 | ||
104 | /* 1. Bonito h/w Configuration */ | |
105 | /* Power on register */ | |
106 | ||
107 | #define BONITO_BONPONCFG (0x00 >> 2) /* 0x100 */ | |
108 | #define BONITO_BONGENCFG_OFFSET 0x4 | |
109 | #define BONITO_BONGENCFG (BONITO_BONGENCFG_OFFSET>>2) /*0x104 */ | |
110 | ||
111 | /* 2. IO & IDE configuration */ | |
112 | #define BONITO_IODEVCFG (0x08 >> 2) /* 0x108 */ | |
113 | ||
114 | /* 3. IO & IDE configuration */ | |
115 | #define BONITO_SDCFG (0x0c >> 2) /* 0x10c */ | |
116 | ||
117 | /* 4. PCI address map control */ | |
118 | #define BONITO_PCIMAP (0x10 >> 2) /* 0x110 */ | |
119 | #define BONITO_PCIMEMBASECFG (0x14 >> 2) /* 0x114 */ | |
120 | #define BONITO_PCIMAP_CFG (0x18 >> 2) /* 0x118 */ | |
121 | ||
122 | /* 5. ICU & GPIO regs */ | |
123 | /* GPIO Regs - r/w */ | |
124 | #define BONITO_GPIODATA_OFFSET 0x1c | |
125 | #define BONITO_GPIODATA (BONITO_GPIODATA_OFFSET >> 2) /* 0x11c */ | |
126 | #define BONITO_GPIOIE (0x20 >> 2) /* 0x120 */ | |
127 | ||
128 | /* ICU Configuration Regs - r/w */ | |
129 | #define BONITO_INTEDGE (0x24 >> 2) /* 0x124 */ | |
130 | #define BONITO_INTSTEER (0x28 >> 2) /* 0x128 */ | |
131 | #define BONITO_INTPOL (0x2c >> 2) /* 0x12c */ | |
132 | ||
133 | /* ICU Enable Regs - IntEn & IntISR are r/o. */ | |
134 | #define BONITO_INTENSET (0x30 >> 2) /* 0x130 */ | |
135 | #define BONITO_INTENCLR (0x34 >> 2) /* 0x134 */ | |
136 | #define BONITO_INTEN (0x38 >> 2) /* 0x138 */ | |
137 | #define BONITO_INTISR (0x3c >> 2) /* 0x13c */ | |
138 | ||
139 | /* PCI mail boxes */ | |
140 | #define BONITO_PCIMAIL0_OFFSET 0x40 | |
141 | #define BONITO_PCIMAIL1_OFFSET 0x44 | |
142 | #define BONITO_PCIMAIL2_OFFSET 0x48 | |
143 | #define BONITO_PCIMAIL3_OFFSET 0x4c | |
144 | #define BONITO_PCIMAIL0 (0x40 >> 2) /* 0x140 */ | |
145 | #define BONITO_PCIMAIL1 (0x44 >> 2) /* 0x144 */ | |
146 | #define BONITO_PCIMAIL2 (0x48 >> 2) /* 0x148 */ | |
147 | #define BONITO_PCIMAIL3 (0x4c >> 2) /* 0x14c */ | |
148 | ||
149 | /* 6. PCI cache */ | |
150 | #define BONITO_PCICACHECTRL (0x50 >> 2) /* 0x150 */ | |
151 | #define BONITO_PCICACHETAG (0x54 >> 2) /* 0x154 */ | |
152 | #define BONITO_PCIBADADDR (0x58 >> 2) /* 0x158 */ | |
153 | #define BONITO_PCIMSTAT (0x5c >> 2) /* 0x15c */ | |
154 | ||
155 | /* 7. other*/ | |
156 | #define BONITO_TIMECFG (0x60 >> 2) /* 0x160 */ | |
157 | #define BONITO_CPUCFG (0x64 >> 2) /* 0x164 */ | |
158 | #define BONITO_DQCFG (0x68 >> 2) /* 0x168 */ | |
159 | #define BONITO_MEMSIZE (0x6C >> 2) /* 0x16c */ | |
160 | ||
161 | #define BONITO_REGS (0x70 >> 2) | |
162 | ||
163 | /* PCI config for south bridge. type 0 */ | |
164 | #define BONITO_PCICONF_IDSEL_MASK 0xfffff800 /* [31:11] */ | |
165 | #define BONITO_PCICONF_IDSEL_OFFSET 11 | |
166 | #define BONITO_PCICONF_FUN_MASK 0x700 /* [10:8] */ | |
167 | #define BONITO_PCICONF_FUN_OFFSET 8 | |
168 | #define BONITO_PCICONF_REG_MASK 0xFC | |
169 | #define BONITO_PCICONF_REG_OFFSET 0 | |
170 | ||
171 | ||
172 | /* idsel BIT = pci slot number +12 */ | |
173 | #define PCI_SLOT_BASE 12 | |
174 | #define PCI_IDSEL_VIA686B_BIT (17) | |
175 | #define PCI_IDSEL_VIA686B (1<<PCI_IDSEL_VIA686B_BIT) | |
176 | ||
177 | #define PCI_ADDR(busno,devno,funno,regno) \ | |
178 | ((((busno)<<16)&0xff0000) + (((devno)<<11)&0xf800) + (((funno)<<8)&0x700) + (regno)) | |
179 | ||
180 | typedef PCIHostState BonitoState; | |
181 | ||
182 | typedef struct PCIBonitoState | |
183 | { | |
184 | PCIDevice dev; | |
185 | BonitoState *pcihost; | |
186 | uint32_t regs[BONITO_REGS]; | |
187 | ||
188 | struct bonldma { | |
189 | uint32_t ldmactrl; | |
190 | uint32_t ldmastat; | |
191 | uint32_t ldmaaddr; | |
192 | uint32_t ldmago; | |
193 | } bonldma; | |
194 | ||
195 | /* Based at 1fe00300, bonito Copier */ | |
196 | struct boncop { | |
197 | uint32_t copctrl; | |
198 | uint32_t copstat; | |
199 | uint32_t coppaddr; | |
200 | uint32_t copgo; | |
201 | } boncop; | |
202 | ||
203 | /* Bonito registers */ | |
204 | target_phys_addr_t bonito_reg_start; | |
205 | target_phys_addr_t bonito_reg_length; | |
206 | int bonito_reg_handle; | |
207 | ||
208 | target_phys_addr_t bonito_pciconf_start; | |
209 | target_phys_addr_t bonito_pciconf_length; | |
210 | int bonito_pciconf_handle; | |
211 | ||
212 | target_phys_addr_t bonito_spciconf_start; | |
213 | target_phys_addr_t bonito_spciconf_length; | |
214 | int bonito_spciconf_handle; | |
215 | ||
216 | target_phys_addr_t bonito_pciio_start; | |
217 | target_phys_addr_t bonito_pciio_length; | |
218 | int bonito_pciio_handle; | |
219 | ||
220 | target_phys_addr_t bonito_localio_start; | |
221 | target_phys_addr_t bonito_localio_length; | |
222 | int bonito_localio_handle; | |
223 | ||
224 | target_phys_addr_t bonito_ldma_start; | |
225 | target_phys_addr_t bonito_ldma_length; | |
226 | int bonito_ldma_handle; | |
227 | ||
228 | target_phys_addr_t bonito_cop_start; | |
229 | target_phys_addr_t bonito_cop_length; | |
230 | int bonito_cop_handle; | |
231 | ||
232 | } PCIBonitoState; | |
233 | ||
234 | PCIBonitoState * bonito_state; | |
235 | ||
236 | static void bonito_writel(void *opaque, target_phys_addr_t addr, uint32_t val) | |
237 | { | |
238 | PCIBonitoState *s = opaque; | |
239 | uint32_t saddr; | |
240 | int reset = 0; | |
241 | ||
242 | saddr = (addr - BONITO_REGBASE) >> 2; | |
243 | ||
244 | DPRINTF("bonito_writel "TARGET_FMT_plx" val %x saddr %x \n", addr, val, saddr); | |
245 | switch (saddr) { | |
246 | case BONITO_BONPONCFG: | |
247 | case BONITO_IODEVCFG: | |
248 | case BONITO_SDCFG: | |
249 | case BONITO_PCIMAP: | |
250 | case BONITO_PCIMEMBASECFG: | |
251 | case BONITO_PCIMAP_CFG: | |
252 | case BONITO_GPIODATA: | |
253 | case BONITO_GPIOIE: | |
254 | case BONITO_INTEDGE: | |
255 | case BONITO_INTSTEER: | |
256 | case BONITO_INTPOL: | |
257 | case BONITO_PCIMAIL0: | |
258 | case BONITO_PCIMAIL1: | |
259 | case BONITO_PCIMAIL2: | |
260 | case BONITO_PCIMAIL3: | |
261 | case BONITO_PCICACHECTRL: | |
262 | case BONITO_PCICACHETAG: | |
263 | case BONITO_PCIBADADDR: | |
264 | case BONITO_PCIMSTAT: | |
265 | case BONITO_TIMECFG: | |
266 | case BONITO_CPUCFG: | |
267 | case BONITO_DQCFG: | |
268 | case BONITO_MEMSIZE: | |
269 | s->regs[saddr] = val; | |
270 | break; | |
271 | case BONITO_BONGENCFG: | |
272 | if (!(s->regs[saddr] & 0x04) && (val & 0x04)) { | |
273 | reset = 1; /* bit 2 jump from 0 to 1 cause reset */ | |
274 | } | |
275 | s->regs[saddr] = val; | |
276 | if (reset) { | |
277 | qemu_system_reset_request(); | |
278 | } | |
279 | break; | |
280 | case BONITO_INTENSET: | |
281 | s->regs[BONITO_INTENSET] = val; | |
282 | s->regs[BONITO_INTEN] |= val; | |
283 | break; | |
284 | case BONITO_INTENCLR: | |
285 | s->regs[BONITO_INTENCLR] = val; | |
286 | s->regs[BONITO_INTEN] &= ~val; | |
287 | break; | |
288 | case BONITO_INTEN: | |
289 | case BONITO_INTISR: | |
290 | DPRINTF("write to readonly bonito register %x \n", saddr); | |
291 | break; | |
292 | default: | |
293 | DPRINTF("write to unknown bonito register %x \n", saddr); | |
294 | break; | |
295 | } | |
296 | } | |
297 | ||
298 | static uint32_t bonito_readl(void *opaque, target_phys_addr_t addr) | |
299 | { | |
300 | PCIBonitoState *s = opaque; | |
301 | uint32_t saddr; | |
302 | ||
303 | saddr = (addr - BONITO_REGBASE) >> 2; | |
304 | ||
305 | DPRINTF("bonito_readl "TARGET_FMT_plx" \n", addr); | |
306 | switch (saddr) { | |
307 | case BONITO_INTISR: | |
308 | return s->regs[saddr]; | |
309 | default: | |
310 | return s->regs[saddr]; | |
311 | } | |
312 | } | |
313 | ||
314 | static CPUWriteMemoryFunc * const bonito_write[] = { | |
315 | NULL, | |
316 | NULL, | |
317 | bonito_writel, | |
318 | }; | |
319 | ||
320 | static CPUReadMemoryFunc * const bonito_read[] = { | |
321 | NULL, | |
322 | NULL, | |
323 | bonito_readl, | |
324 | }; | |
325 | ||
326 | static void bonito_pciconf_writel(void *opaque, target_phys_addr_t addr, | |
327 | uint32_t val) | |
328 | { | |
329 | PCIBonitoState *s = opaque; | |
330 | ||
331 | DPRINTF("bonito_pciconf_writel "TARGET_FMT_plx" val %x \n", addr, val); | |
332 | s->dev.config_write(&s->dev, addr, val, 4); | |
333 | } | |
334 | ||
335 | static uint32_t bonito_pciconf_readl(void *opaque, target_phys_addr_t addr) | |
336 | { | |
337 | ||
338 | PCIBonitoState *s = opaque; | |
339 | ||
340 | DPRINTF("bonito_pciconf_readl "TARGET_FMT_plx"\n", addr); | |
341 | return s->dev.config_read(&s->dev, addr, 4); | |
342 | } | |
343 | ||
344 | /* north bridge PCI configure space. 0x1fe0 0000 - 0x1fe0 00ff */ | |
345 | static CPUWriteMemoryFunc * const bonito_pciconf_write[] = { | |
346 | NULL, | |
347 | NULL, | |
348 | bonito_pciconf_writel, | |
349 | }; | |
350 | ||
351 | static CPUReadMemoryFunc * const bonito_pciconf_read[] = { | |
352 | NULL, | |
353 | NULL, | |
354 | bonito_pciconf_readl, | |
355 | }; | |
356 | ||
357 | static uint32_t bonito_ldma_readl(void *opaque, target_phys_addr_t addr) | |
358 | { | |
359 | uint32_t val; | |
360 | PCIBonitoState *s = opaque; | |
361 | ||
362 | val = ((uint32_t *)(&s->bonldma))[addr/sizeof(uint32_t)]; | |
363 | ||
364 | return val; | |
365 | } | |
366 | ||
367 | static void bonito_ldma_writel(void *opaque, target_phys_addr_t addr, | |
368 | uint32_t val) | |
369 | { | |
370 | PCIBonitoState *s = opaque; | |
371 | ||
372 | ((uint32_t *)(&s->bonldma))[addr/sizeof(uint32_t)] = val & 0xffffffff; | |
373 | } | |
374 | ||
375 | static CPUWriteMemoryFunc * const bonito_ldma_write[] = { | |
376 | NULL, | |
377 | NULL, | |
378 | bonito_ldma_writel, | |
379 | }; | |
380 | ||
381 | static CPUReadMemoryFunc * const bonito_ldma_read[] = { | |
382 | NULL, | |
383 | NULL, | |
384 | bonito_ldma_readl, | |
385 | }; | |
386 | ||
387 | static uint32_t bonito_cop_readl(void *opaque, target_phys_addr_t addr) | |
388 | { | |
389 | uint32_t val; | |
390 | PCIBonitoState *s = opaque; | |
391 | ||
392 | val = ((uint32_t *)(&s->boncop))[addr/sizeof(uint32_t)]; | |
393 | ||
394 | return val; | |
395 | } | |
396 | ||
397 | static void bonito_cop_writel(void *opaque, target_phys_addr_t addr, | |
398 | uint32_t val) | |
399 | { | |
400 | PCIBonitoState *s = opaque; | |
401 | ||
402 | ((uint32_t *)(&s->boncop))[addr/sizeof(uint32_t)] = val & 0xffffffff; | |
403 | } | |
404 | ||
405 | static CPUWriteMemoryFunc * const bonito_cop_write[] = { | |
406 | NULL, | |
407 | NULL, | |
408 | bonito_cop_writel, | |
409 | }; | |
410 | ||
411 | static CPUReadMemoryFunc * const bonito_cop_read[] = { | |
412 | NULL, | |
413 | NULL, | |
414 | bonito_cop_readl, | |
415 | }; | |
416 | ||
417 | static uint32_t bonito_sbridge_pciaddr(void *opaque, target_phys_addr_t addr) | |
418 | { | |
419 | PCIBonitoState *s = opaque; | |
420 | uint32_t cfgaddr; | |
421 | uint32_t idsel; | |
422 | uint32_t devno; | |
423 | uint32_t funno; | |
424 | uint32_t regno; | |
425 | uint32_t pciaddr; | |
426 | ||
427 | /* support type0 pci config */ | |
428 | if ((s->regs[BONITO_PCIMAP_CFG] & 0x10000) != 0x0) { | |
429 | return 0xffffffff; | |
430 | } | |
431 | ||
432 | cfgaddr = addr & 0xffff; | |
433 | cfgaddr |= (s->regs[BONITO_PCIMAP_CFG] & 0xffff) << 16; | |
434 | ||
435 | idsel = (cfgaddr & BONITO_PCICONF_IDSEL_MASK) >> BONITO_PCICONF_IDSEL_OFFSET; | |
436 | devno = ffs(idsel) - 1; | |
437 | funno = (cfgaddr & BONITO_PCICONF_FUN_MASK) >> BONITO_PCICONF_FUN_OFFSET; | |
438 | regno = (cfgaddr & BONITO_PCICONF_REG_MASK) >> BONITO_PCICONF_REG_OFFSET; | |
439 | ||
440 | if (idsel == 0) { | |
441 | fprintf(stderr, "error in bonito pci config address" TARGET_FMT_plx | |
442 | ",pcimap_cfg=%x\n", addr, s->regs[BONITO_PCIMAP_CFG]); | |
443 | exit(1); | |
444 | } | |
445 | pciaddr = PCI_ADDR(pci_bus_num(s->pcihost->bus), devno, funno, regno); | |
446 | DPRINTF("cfgaddr %x pciaddr %x busno %x devno %d funno %d regno %d \n", | |
447 | cfgaddr, pciaddr, pci_bus_num(s->pcihost->bus), devno, funno, regno); | |
448 | ||
449 | return pciaddr; | |
450 | } | |
451 | ||
452 | static void bonito_spciconf_writeb(void *opaque, target_phys_addr_t addr, | |
453 | uint32_t val) | |
454 | { | |
455 | PCIBonitoState *s = opaque; | |
456 | uint32_t pciaddr; | |
457 | uint16_t status; | |
458 | ||
459 | DPRINTF("bonito_spciconf_writeb "TARGET_FMT_plx" val %x \n", addr, val); | |
460 | pciaddr = bonito_sbridge_pciaddr(s, addr); | |
461 | ||
462 | if (pciaddr == 0xffffffff) { | |
463 | return; | |
464 | } | |
465 | ||
466 | /* set the pci address in s->config_reg */ | |
467 | s->pcihost->config_reg = (pciaddr) | (1u << 31); | |
468 | pci_data_write(s->pcihost->bus, s->pcihost->config_reg, val & 0xff, 1); | |
469 | ||
470 | /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */ | |
471 | status = pci_get_word(s->dev.config + PCI_STATUS); | |
472 | status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT); | |
473 | pci_set_word(s->dev.config + PCI_STATUS, status); | |
474 | } | |
475 | ||
476 | static void bonito_spciconf_writew(void *opaque, target_phys_addr_t addr, | |
477 | uint32_t val) | |
478 | { | |
479 | PCIBonitoState *s = opaque; | |
480 | uint32_t pciaddr; | |
481 | uint16_t status; | |
482 | ||
483 | DPRINTF("bonito_spciconf_writew "TARGET_FMT_plx" val %x \n", addr, val); | |
484 | assert((addr&0x1)==0); | |
485 | ||
486 | pciaddr = bonito_sbridge_pciaddr(s, addr); | |
487 | ||
488 | if (pciaddr == 0xffffffff) { | |
489 | return; | |
490 | } | |
491 | ||
492 | /* set the pci address in s->config_reg */ | |
493 | s->pcihost->config_reg = (pciaddr) | (1u << 31); | |
494 | pci_data_write(s->pcihost->bus, s->pcihost->config_reg, val, 2); | |
495 | ||
496 | /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */ | |
497 | status = pci_get_word(s->dev.config + PCI_STATUS); | |
498 | status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT); | |
499 | pci_set_word(s->dev.config + PCI_STATUS, status); | |
500 | } | |
501 | ||
502 | static void bonito_spciconf_writel(void *opaque, target_phys_addr_t addr, | |
503 | uint32_t val) | |
504 | { | |
505 | PCIBonitoState *s = opaque; | |
506 | uint32_t pciaddr; | |
507 | uint16_t status; | |
508 | ||
509 | DPRINTF("bonito_spciconf_writel "TARGET_FMT_plx" val %x \n", addr, val); | |
510 | assert((addr&0x3)==0); | |
511 | ||
512 | pciaddr = bonito_sbridge_pciaddr(s, addr); | |
513 | ||
514 | if (pciaddr == 0xffffffff) { | |
515 | return; | |
516 | } | |
517 | ||
518 | /* set the pci address in s->config_reg */ | |
519 | s->pcihost->config_reg = (pciaddr) | (1u << 31); | |
520 | pci_data_write(s->pcihost->bus, s->pcihost->config_reg, val, 4); | |
521 | ||
522 | /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */ | |
523 | status = pci_get_word(s->dev.config + PCI_STATUS); | |
524 | status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT); | |
525 | pci_set_word(s->dev.config + PCI_STATUS, status); | |
526 | } | |
527 | ||
528 | static uint32_t bonito_spciconf_readb(void *opaque, target_phys_addr_t addr) | |
529 | { | |
530 | PCIBonitoState *s = opaque; | |
531 | uint32_t pciaddr; | |
532 | uint16_t status; | |
533 | ||
534 | DPRINTF("bonito_spciconf_readb "TARGET_FMT_plx" \n", addr); | |
535 | pciaddr = bonito_sbridge_pciaddr(s, addr); | |
536 | ||
537 | if (pciaddr == 0xffffffff) { | |
538 | return 0xff; | |
539 | } | |
540 | ||
541 | /* set the pci address in s->config_reg */ | |
542 | s->pcihost->config_reg = (pciaddr) | (1u << 31); | |
543 | ||
544 | /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */ | |
545 | status = pci_get_word(s->dev.config + PCI_STATUS); | |
546 | status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT); | |
547 | pci_set_word(s->dev.config + PCI_STATUS, status); | |
548 | ||
549 | return pci_data_read(s->pcihost->bus, s->pcihost->config_reg, 1); | |
550 | } | |
551 | ||
552 | static uint32_t bonito_spciconf_readw(void *opaque, target_phys_addr_t addr) | |
553 | { | |
554 | PCIBonitoState *s = opaque; | |
555 | uint32_t pciaddr; | |
556 | uint16_t status; | |
557 | ||
558 | DPRINTF("bonito_spciconf_readw "TARGET_FMT_plx" \n", addr); | |
559 | assert((addr&0x1)==0); | |
560 | ||
561 | pciaddr = bonito_sbridge_pciaddr(s, addr); | |
562 | ||
563 | if (pciaddr == 0xffffffff) { | |
564 | return 0xffff; | |
565 | } | |
566 | ||
567 | /* set the pci address in s->config_reg */ | |
568 | s->pcihost->config_reg = (pciaddr) | (1u << 31); | |
569 | ||
570 | /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */ | |
571 | status = pci_get_word(s->dev.config + PCI_STATUS); | |
572 | status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT); | |
573 | pci_set_word(s->dev.config + PCI_STATUS, status); | |
574 | ||
575 | return pci_data_read(s->pcihost->bus, s->pcihost->config_reg, 2); | |
576 | } | |
577 | ||
578 | static uint32_t bonito_spciconf_readl(void *opaque, target_phys_addr_t addr) | |
579 | { | |
580 | PCIBonitoState *s = opaque; | |
581 | uint32_t pciaddr; | |
582 | uint16_t status; | |
583 | ||
584 | DPRINTF("bonito_spciconf_readl "TARGET_FMT_plx" \n", addr); | |
585 | assert((addr&0x3) == 0); | |
586 | ||
587 | pciaddr = bonito_sbridge_pciaddr(s, addr); | |
588 | ||
589 | if (pciaddr == 0xffffffff) { | |
590 | return 0xffffffff; | |
591 | } | |
592 | ||
593 | /* set the pci address in s->config_reg */ | |
594 | s->pcihost->config_reg = (pciaddr) | (1u << 31); | |
595 | ||
596 | /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */ | |
597 | status = pci_get_word(s->dev.config + PCI_STATUS); | |
598 | status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT); | |
599 | pci_set_word(s->dev.config + PCI_STATUS, status); | |
600 | ||
601 | return pci_data_read(s->pcihost->bus, s->pcihost->config_reg, 4); | |
602 | } | |
603 | ||
604 | /* south bridge PCI configure space. 0x1fe8 0000 - 0x1fef ffff */ | |
605 | static CPUWriteMemoryFunc * const bonito_spciconf_write[] = { | |
606 | bonito_spciconf_writeb, | |
607 | bonito_spciconf_writew, | |
608 | bonito_spciconf_writel, | |
609 | }; | |
610 | ||
611 | static CPUReadMemoryFunc * const bonito_spciconf_read[] = { | |
612 | bonito_spciconf_readb, | |
613 | bonito_spciconf_readw, | |
614 | bonito_spciconf_readl, | |
615 | }; | |
616 | ||
617 | #define BONITO_IRQ_BASE 32 | |
618 | ||
619 | static void pci_bonito_set_irq(void *opaque, int irq_num, int level) | |
620 | { | |
621 | qemu_irq *pic = opaque; | |
622 | int internal_irq = irq_num - BONITO_IRQ_BASE; | |
623 | ||
624 | if (bonito_state->regs[BONITO_INTEDGE] & (1<<internal_irq)) { | |
625 | qemu_irq_pulse(*pic); | |
626 | } else { /* level triggered */ | |
627 | if (bonito_state->regs[BONITO_INTPOL] & (1<<internal_irq)) { | |
628 | qemu_irq_raise(*pic); | |
629 | } else { | |
630 | qemu_irq_lower(*pic); | |
631 | } | |
632 | } | |
633 | } | |
634 | ||
635 | /* map the original irq (0~3) to bonito irq (16~47, but 16~31 are unused) */ | |
636 | static int pci_bonito_map_irq(PCIDevice * pci_dev, int irq_num) | |
637 | { | |
638 | int slot; | |
639 | ||
640 | slot = (pci_dev->devfn >> 3); | |
641 | ||
642 | switch (slot) { | |
643 | case 5: /* FULONG2E_VIA_SLOT, SouthBridge, IDE, USB, ACPI, AC97, MC97 */ | |
644 | return irq_num % 4 + BONITO_IRQ_BASE; | |
645 | case 6: /* FULONG2E_ATI_SLOT, VGA */ | |
646 | return 4 + BONITO_IRQ_BASE; | |
647 | case 7: /* FULONG2E_RTL_SLOT, RTL8139 */ | |
648 | return 5 + BONITO_IRQ_BASE; | |
649 | case 8 ... 12: /* PCI slot 1 to 4 */ | |
650 | return (slot - 8 + irq_num) + 6 + BONITO_IRQ_BASE; | |
651 | default: /* Unknown device, don't do any translation */ | |
652 | return irq_num; | |
653 | } | |
654 | } | |
655 | ||
656 | static void bonito_reset(void *opaque) | |
657 | { | |
658 | PCIBonitoState *s = opaque; | |
659 | ||
660 | /* set the default value of north bridge registers */ | |
661 | ||
662 | s->regs[BONITO_BONPONCFG] = 0xc40; | |
663 | s->regs[BONITO_BONGENCFG] = 0x1384; | |
664 | s->regs[BONITO_IODEVCFG] = 0x2bff8010; | |
665 | s->regs[BONITO_SDCFG] = 0x255e0091; | |
666 | ||
667 | s->regs[BONITO_GPIODATA] = 0x1ff; | |
668 | s->regs[BONITO_GPIOIE] = 0x1ff; | |
669 | s->regs[BONITO_DQCFG] = 0x8; | |
670 | s->regs[BONITO_MEMSIZE] = 0x10000000; | |
671 | s->regs[BONITO_PCIMAP] = 0x6140; | |
672 | } | |
673 | ||
674 | static const VMStateDescription vmstate_bonito = { | |
675 | .name = "Bonito", | |
676 | .version_id = 1, | |
677 | .minimum_version_id = 1, | |
678 | .minimum_version_id_old = 1, | |
679 | .fields = (VMStateField []) { | |
680 | VMSTATE_PCI_DEVICE(dev, PCIBonitoState), | |
681 | VMSTATE_END_OF_LIST() | |
682 | } | |
683 | }; | |
684 | ||
685 | static int bonito_pcihost_initfn(SysBusDevice *dev) | |
686 | { | |
687 | return 0; | |
688 | } | |
689 | ||
690 | static int bonito_initfn(PCIDevice *dev) | |
691 | { | |
692 | PCIBonitoState *s = DO_UPCAST(PCIBonitoState, dev, dev); | |
693 | ||
694 | /* Bonito North Bridge, built on FPGA, VENDOR_ID/DEVICE_ID are "undefined" */ | |
d0f7453d | 695 | pci_config_set_prog_interface(dev->config, 0x00); |
d0f7453d HC |
696 | |
697 | /* set the north bridge register mapping */ | |
2507c12a AG |
698 | s->bonito_reg_handle = cpu_register_io_memory(bonito_read, bonito_write, s, |
699 | DEVICE_NATIVE_ENDIAN); | |
d0f7453d HC |
700 | s->bonito_reg_start = BONITO_INTERNAL_REG_BASE; |
701 | s->bonito_reg_length = BONITO_INTERNAL_REG_SIZE; | |
702 | cpu_register_physical_memory(s->bonito_reg_start, s->bonito_reg_length, | |
703 | s->bonito_reg_handle); | |
704 | ||
705 | /* set the north bridge pci configure mapping */ | |
706 | s->bonito_pciconf_handle = cpu_register_io_memory(bonito_pciconf_read, | |
2507c12a AG |
707 | bonito_pciconf_write, s, |
708 | DEVICE_NATIVE_ENDIAN); | |
d0f7453d HC |
709 | s->bonito_pciconf_start = BONITO_PCICONFIG_BASE; |
710 | s->bonito_pciconf_length = BONITO_PCICONFIG_SIZE; | |
711 | cpu_register_physical_memory(s->bonito_pciconf_start, s->bonito_pciconf_length, | |
712 | s->bonito_pciconf_handle); | |
713 | ||
714 | /* set the south bridge pci configure mapping */ | |
715 | s->bonito_spciconf_handle = cpu_register_io_memory(bonito_spciconf_read, | |
2507c12a AG |
716 | bonito_spciconf_write, s, |
717 | DEVICE_NATIVE_ENDIAN); | |
d0f7453d HC |
718 | s->bonito_spciconf_start = BONITO_SPCICONFIG_BASE; |
719 | s->bonito_spciconf_length = BONITO_SPCICONFIG_SIZE; | |
720 | cpu_register_physical_memory(s->bonito_spciconf_start, s->bonito_spciconf_length, | |
721 | s->bonito_spciconf_handle); | |
722 | ||
723 | s->bonito_ldma_handle = cpu_register_io_memory(bonito_ldma_read, | |
2507c12a AG |
724 | bonito_ldma_write, s, |
725 | DEVICE_NATIVE_ENDIAN); | |
d0f7453d HC |
726 | s->bonito_ldma_start = 0xbfe00200; |
727 | s->bonito_ldma_length = 0x100; | |
728 | cpu_register_physical_memory(s->bonito_ldma_start, s->bonito_ldma_length, | |
729 | s->bonito_ldma_handle); | |
730 | ||
731 | s->bonito_cop_handle = cpu_register_io_memory(bonito_cop_read, | |
2507c12a AG |
732 | bonito_cop_write, s, |
733 | DEVICE_NATIVE_ENDIAN); | |
d0f7453d HC |
734 | s->bonito_cop_start = 0xbfe00300; |
735 | s->bonito_cop_length = 0x100; | |
736 | cpu_register_physical_memory(s->bonito_cop_start, s->bonito_cop_length, | |
737 | s->bonito_cop_handle); | |
738 | ||
739 | /* Map PCI IO Space 0x1fd0 0000 - 0x1fd1 0000 */ | |
740 | s->bonito_pciio_start = BONITO_PCIIO_BASE; | |
741 | s->bonito_pciio_length = BONITO_PCIIO_SIZE; | |
742 | isa_mem_base = s->bonito_pciio_start; | |
968d683c | 743 | isa_mmio_init(s->bonito_pciio_start, s->bonito_pciio_length); |
d0f7453d HC |
744 | |
745 | /* add pci local io mapping */ | |
746 | s->bonito_localio_start = BONITO_DEV_BASE; | |
747 | s->bonito_localio_length = BONITO_DEV_SIZE; | |
968d683c | 748 | isa_mmio_init(s->bonito_localio_start, s->bonito_localio_length); |
d0f7453d HC |
749 | |
750 | /* set the default value of north bridge pci config */ | |
751 | pci_set_word(dev->config + PCI_COMMAND, 0x0000); | |
752 | pci_set_word(dev->config + PCI_STATUS, 0x0000); | |
753 | pci_set_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID, 0x0000); | |
754 | pci_set_word(dev->config + PCI_SUBSYSTEM_ID, 0x0000); | |
755 | ||
756 | pci_set_byte(dev->config + PCI_INTERRUPT_LINE, 0x00); | |
757 | pci_set_byte(dev->config + PCI_INTERRUPT_PIN, 0x01); | |
758 | pci_set_byte(dev->config + PCI_MIN_GNT, 0x3c); | |
759 | pci_set_byte(dev->config + PCI_MAX_LAT, 0x00); | |
760 | ||
761 | qemu_register_reset(bonito_reset, s); | |
762 | ||
763 | return 0; | |
764 | } | |
765 | ||
766 | PCIBus *bonito_init(qemu_irq *pic) | |
767 | { | |
768 | DeviceState *dev; | |
769 | PCIBus *b; | |
770 | BonitoState *pcihost; | |
771 | PCIBonitoState *s; | |
772 | PCIDevice *d; | |
773 | ||
774 | dev = qdev_create(NULL, "Bonito-pcihost"); | |
775 | pcihost = FROM_SYSBUS(BonitoState, sysbus_from_qdev(dev)); | |
776 | b = pci_register_bus(&pcihost->busdev.qdev, "pci", pci_bonito_set_irq, | |
1e39101c | 777 | pci_bonito_map_irq, pic, get_system_memory(), |
aee97b84 | 778 | get_system_io(), |
1e39101c | 779 | 0x28, 32); |
d0f7453d HC |
780 | pcihost->bus = b; |
781 | qdev_init_nofail(dev); | |
d0f7453d HC |
782 | |
783 | d = pci_create_simple(b, PCI_DEVFN(0, 0), "Bonito"); | |
784 | s = DO_UPCAST(PCIBonitoState, dev, d); | |
785 | s->pcihost = pcihost; | |
786 | bonito_state = s; | |
787 | ||
788 | return b; | |
789 | } | |
790 | ||
791 | static PCIDeviceInfo bonito_info = { | |
792 | .qdev.name = "Bonito", | |
793 | .qdev.desc = "Host bridge", | |
794 | .qdev.size = sizeof(PCIBonitoState), | |
795 | .qdev.vmsd = &vmstate_bonito, | |
796 | .qdev.no_user = 1, | |
797 | .init = bonito_initfn, | |
51387f86 IY |
798 | /*Bonito North Bridge, built on FPGA, VENDOR_ID/DEVICE_ID are "undefined"*/ |
799 | .vendor_id = 0xdf53, | |
800 | .device_id = 0x00d5, | |
801 | .revision = 0x01, | |
802 | .class_id = PCI_CLASS_BRIDGE_HOST, | |
d0f7453d HC |
803 | }; |
804 | ||
805 | static SysBusDeviceInfo bonito_pcihost_info = { | |
806 | .init = bonito_pcihost_initfn, | |
807 | .qdev.name = "Bonito-pcihost", | |
808 | .qdev.size = sizeof(BonitoState), | |
809 | .qdev.no_user = 1, | |
810 | }; | |
811 | ||
812 | static void bonito_register(void) | |
813 | { | |
814 | sysbus_register_withprop(&bonito_pcihost_info); | |
815 | pci_qdev_register(&bonito_info); | |
816 | } | |
817 | device_init(bonito_register); |