[qemu.git] / linux-headers / linux / vhost.h

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _LINUX_VHOST_H
#define _LINUX_VHOST_H
/* Userspace interface for in-kernel virtio accelerators. */

/* vhost is used to reduce the number of system calls involved in virtio.
 *
 * Existing virtio net code is used in the guest without modification.
 *
 * This header includes interface used by userspace hypervisor for
 * device configuration.
 */

#include <linux/vhost_types.h>
#include <linux/types.h>
#include <linux/ioctl.h>

#define VHOST_FILE_UNBIND -1

/* ioctls */

#define VHOST_VIRTIO 0xAF

/* Features bitmask for forward compatibility.  Transport bits are used for
 * vhost specific features. */
#define VHOST_GET_FEATURES	_IOR(VHOST_VIRTIO, 0x00, __u64)
#define VHOST_SET_FEATURES	_IOW(VHOST_VIRTIO, 0x00, __u64)

/* Set current process as the (exclusive) owner of this file descriptor.  This
 * must be called before any other vhost command.  Further calls to
 * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
/* Give up ownership, and reset the device to default values.
 * Allows subsequent call to VHOST_OWNER_SET to succeed. */
#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)

/* Set up/modify memory layout */
#define VHOST_SET_MEM_TABLE	_IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)

/* Write logging setup. */
/* Memory writes can optionally be logged by setting bit at an offset
 * (calculated from the physical address) from specified log base.
 * The bit is set using an atomic 32 bit operation. */
/* Set base address for logging. */
#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
/* Specify an eventfd file descriptor to signal on log write. */
#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)

/* Ring setup. */
/* Set number of descriptors in ring. This parameter can not
 * be modified while ring is running (bound to a device). */
#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
/* Set addresses for the ring. */
#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
/* Base value where queue looks for available descriptors */
#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
/* Get accessor: reads index, writes value in num */
#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)

/* Set the vring byte order in num. Valid values are VHOST_VRING_LITTLE_ENDIAN
 * or VHOST_VRING_BIG_ENDIAN (other values return -EINVAL).
 * The byte order cannot be changed while the device is active: trying to do so
 * returns -EBUSY.
 * This is a legacy only API that is simply ignored when VIRTIO_F_VERSION_1 is
 * set.
 * Not all kernel configurations support this ioctl, but all configurations that
 * support SET also support GET.
 */
#define VHOST_VRING_LITTLE_ENDIAN 0
#define VHOST_VRING_BIG_ENDIAN 1
#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)

/* The following ioctls use eventfd file descriptors to signal and poll
 * for events. */

/* Set eventfd to poll for added buffers */
#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
/* Set eventfd to signal when buffers have beed used */
#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
/* Set eventfd to signal an error */
#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
/* Set busy loop timeout (in us) */
#define VHOST_SET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x23,	\
					 struct vhost_vring_state)
/* Get busy loop timeout (in us) */
#define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24,	\
					 struct vhost_vring_state)

/* Set or get vhost backend capability */

/* Use message type V2 */
#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
/* IOTLB can accept batching hints */
#define VHOST_BACKEND_F_IOTLB_BATCH  0x2

#define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
#define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)

/* VHOST_NET specific defines */

/* Attach virtio net ring to a raw socket, or tap device.
 * The socket must be already bound to an ethernet device, this device will be
 * used for transmit.  Pass fd -1 to unbind from the socket and the transmit
 * device.  This can be used to stop the ring (e.g. for migration). */
#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)

/* VHOST_SCSI specific defines */

#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
/* Changing this breaks userspace. */
#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int)
/* Set and get the events missed flag */
#define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32)
#define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32)

/* VHOST_VSOCK specific defines */

#define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
#define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)

/* VHOST_VDPA specific defines */

/* Get the device id. The device ids follow the same definition of
 * the device id defined in virtio-spec.
 */
#define VHOST_VDPA_GET_DEVICE_ID	_IOR(VHOST_VIRTIO, 0x70, __u32)
/* Get and set the status. The status bits follow the same definition
 * of the device status defined in virtio-spec.
 */
#define VHOST_VDPA_GET_STATUS		_IOR(VHOST_VIRTIO, 0x71, __u8)
#define VHOST_VDPA_SET_STATUS		_IOW(VHOST_VIRTIO, 0x72, __u8)
/* Get and set the device config. The device config follows the same
 * definition of the device config defined in virtio-spec.
 */
#define VHOST_VDPA_GET_CONFIG		_IOR(VHOST_VIRTIO, 0x73, \
					     struct vhost_vdpa_config)
#define VHOST_VDPA_SET_CONFIG		_IOW(VHOST_VIRTIO, 0x74, \
					     struct vhost_vdpa_config)
/* Enable/disable the ring. */
#define VHOST_VDPA_SET_VRING_ENABLE	_IOW(VHOST_VIRTIO, 0x75, \
					     struct vhost_vring_state)
/* Get the max ring size. */
#define VHOST_VDPA_GET_VRING_NUM	_IOR(VHOST_VIRTIO, 0x76, __u16)

/* Set event fd for config interrupt*/
#define VHOST_VDPA_SET_CONFIG_CALL	_IOW(VHOST_VIRTIO, 0x77, int)

/* Get the valid iova range */
#define VHOST_VDPA_GET_IOVA_RANGE	_IOR(VHOST_VIRTIO, 0x78, \
					     struct vhost_vdpa_iova_range)
#endif
Commit	Line	Data
dd873966	1	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
51b24e34 JK	2	#ifndef _LINUX_VHOST_H
	3	#define _LINUX_VHOST_H
	4	/* Userspace interface for in-kernel virtio accelerators. */
	5
	6	/* vhost is used to reduce the number of system calls involved in virtio.
	7	*
	8	* Existing virtio net code is used in the guest without modification.
	9	*
	10	* This header includes interface used by userspace hypervisor for
	11	* device configuration.
	12	*/
	13
da054c64	14	#include <linux/vhost_types.h>
51b24e34	15	#include <linux/types.h>
51b24e34	16	#include <linux/ioctl.h>
51b24e34	17
f76b348e CH	18	#define VHOST_FILE_UNBIND -1
f76b348e CH	19
51b24e34 JK	20	/* ioctls */
	21
	22	#define VHOST_VIRTIO 0xAF
	23
	24	/* Features bitmask for forward compatibility. Transport bits are used for
	25	* vhost specific features. */
	26	#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64)
	27	#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64)
	28
	29	/* Set current process as the (exclusive) owner of this file descriptor. This
	30	* must be called before any other vhost command. Further calls to
	31	* VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
	32	#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
	33	/* Give up ownership, and reset the device to default values.
	34	* Allows subsequent call to VHOST_OWNER_SET to succeed. */
60915dc4	35	#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
51b24e34 JK	36
	37	/* Set up/modify memory layout */
	38	#define VHOST_SET_MEM_TABLE _IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
	39
	40	/* Write logging setup. */
	41	/* Memory writes can optionally be logged by setting bit at an offset
	42	* (calculated from the physical address) from specified log base.
	43	* The bit is set using an atomic 32 bit operation. */
	44	/* Set base address for logging. */
	45	#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
	46	/* Specify an eventfd file descriptor to signal on log write. */
	47	#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
	48
	49	/* Ring setup. */
	50	/* Set number of descriptors in ring. This parameter can not
	51	* be modified while ring is running (bound to a device). */
	52	#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
	53	/* Set addresses for the ring. */
	54	#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
	55	/* Base value where queue looks for available descriptors */
	56	#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
	57	/* Get accessor: reads index, writes value in num */
	58	#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
	59
332f6407 GK	60	/* Set the vring byte order in num. Valid values are VHOST_VRING_LITTLE_ENDIAN
	61	* or VHOST_VRING_BIG_ENDIAN (other values return -EINVAL).
	62	* The byte order cannot be changed while the device is active: trying to do so
	63	* returns -EBUSY.
	64	* This is a legacy only API that is simply ignored when VIRTIO_F_VERSION_1 is
	65	* set.
	66	* Not all kernel configurations support this ioctl, but all configurations that
	67	* support SET also support GET.
	68	*/
	69	#define VHOST_VRING_LITTLE_ENDIAN 0
	70	#define VHOST_VRING_BIG_ENDIAN 1
	71	#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
	72	#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)
	73
51b24e34 JK	74	/* The following ioctls use eventfd file descriptors to signal and poll
	75	* for events. */
	76
	77	/* Set eventfd to poll for added buffers */
	78	#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
	79	/* Set eventfd to signal when buffers have beed used */
	80	#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
	81	/* Set eventfd to signal an error */
	82	#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
b89485a5 PB	83	/* Set busy loop timeout (in us) */
	84	#define VHOST_SET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x23, \
	85	struct vhost_vring_state)
	86	/* Get busy loop timeout (in us) */
	87	#define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24, \
	88	struct vhost_vring_state)
51b24e34	89
d36f7de8 CH	90	/* Set or get vhost backend capability */
	91
	92	/* Use message type V2 */
	93	#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
e6546342 JW	94	/* IOTLB can accept batching hints */
e6546342 JW	95	#define VHOST_BACKEND_F_IOTLB_BATCH 0x2
d36f7de8 CH	96
d36f7de8 CH	97	#define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
8f3cd250	98	#define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
d36f7de8	99
51b24e34 JK	100	/* VHOST_NET specific defines */
	101
	102	/* Attach virtio net ring to a raw socket, or tap device.
	103	* The socket must be already bound to an ethernet device, this device will be
	104	* used for transmit. Pass fd -1 to unbind from the socket and the transmit
	105	* device. This can be used to stop the ring (e.g. for migration). */
	106	#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
	107
da054c64	108	/* VHOST_SCSI specific defines */
e098b453 AK	109
	110	#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
	111	#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
	112	/* Changing this breaks userspace. */
	113	#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int)
	114	/* Set and get the events missed flag */
	115	#define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32)
	116	#define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32)
	117
dbdfea92 CH	118	/* VHOST_VSOCK specific defines */
	119
	120	#define VHOST_VSOCK_SET_GUEST_CID _IOW(VHOST_VIRTIO, 0x60, __u64)
	121	#define VHOST_VSOCK_SET_RUNNING _IOW(VHOST_VIRTIO, 0x61, int)
	122
dc6f8d45 CH	123	/* VHOST_VDPA specific defines */
	124
	125	/* Get the device id. The device ids follow the same definition of
	126	* the device id defined in virtio-spec.
	127	*/
	128	#define VHOST_VDPA_GET_DEVICE_ID _IOR(VHOST_VIRTIO, 0x70, __u32)
	129	/* Get and set the status. The status bits follow the same definition
	130	* of the device status defined in virtio-spec.
	131	*/
	132	#define VHOST_VDPA_GET_STATUS _IOR(VHOST_VIRTIO, 0x71, __u8)
	133	#define VHOST_VDPA_SET_STATUS _IOW(VHOST_VIRTIO, 0x72, __u8)
	134	/* Get and set the device config. The device config follows the same
	135	* definition of the device config defined in virtio-spec.
	136	*/
	137	#define VHOST_VDPA_GET_CONFIG _IOR(VHOST_VIRTIO, 0x73, \
	138	struct vhost_vdpa_config)
	139	#define VHOST_VDPA_SET_CONFIG _IOW(VHOST_VIRTIO, 0x74, \
	140	struct vhost_vdpa_config)
	141	/* Enable/disable the ring. */
	142	#define VHOST_VDPA_SET_VRING_ENABLE _IOW(VHOST_VIRTIO, 0x75, \
	143	struct vhost_vring_state)
	144	/* Get the max ring size. */
	145	#define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16)
	146
f76b348e CH	147	/* Set event fd for config interrupt*/
f76b348e CH	148	#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int)
b3c818a4 EF	149
	150	/* Get the valid iova range */
	151	#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \
	152	struct vhost_vdpa_iova_range)
51b24e34	153	#endif