]> Git Repo - qemu.git/blame - target-mips/cpu.h
Halt/reboot support for Linux, by Daniel Jacobowitz. This is a band-aid
[qemu.git] / target-mips / cpu.h
CommitLineData
6af0bf9c
FB
1#if !defined (__MIPS_CPU_H__)
2#define __MIPS_CPU_H__
3
4ad40f36
FB
4#define TARGET_HAS_ICE 1
5
c5d6edc3 6#include "config.h"
6af0bf9c
FB
7#include "mips-defs.h"
8#include "cpu-defs.h"
6af0bf9c
FB
9#include "softfloat.h"
10
fdbb4691
FB
11// uint_fast8_t and uint_fast16_t not in <sys/int_types.h>
12// XXX: move that elsewhere
13#if defined(HOST_SOLARIS) && SOLARISREV < 10
14typedef unsigned char uint_fast8_t;
15typedef unsigned int uint_fast16_t;
16#endif
17
6af0bf9c
FB
18typedef union fpr_t fpr_t;
19union fpr_t {
6ea83fed
FB
20 float64 fd; /* ieee double precision */
21 float32 fs[2];/* ieee single precision */
22 uint64_t d; /* binary single fixed-point */
23 uint32_t w[2]; /* binary single fixed-point */
6af0bf9c 24};
6ea83fed
FB
25/* define FP_ENDIAN_IDX to access the same location
26 * in the fpr_t union regardless of the host endianess
27 */
28#if defined(WORDS_BIGENDIAN)
29# define FP_ENDIAN_IDX 1
30#else
31# define FP_ENDIAN_IDX 0
32#endif
6af0bf9c
FB
33
34#if defined(MIPS_USES_R4K_TLB)
35typedef struct tlb_t tlb_t;
36struct tlb_t {
37 target_ulong VPN;
38 target_ulong end;
4ad40f36 39 target_ulong end2;
98c1b82b
PB
40 uint_fast8_t ASID;
41 uint_fast16_t G:1;
42 uint_fast16_t C0:3;
43 uint_fast16_t C1:3;
44 uint_fast16_t V0:1;
45 uint_fast16_t V1:1;
46 uint_fast16_t D0:1;
47 uint_fast16_t D1:1;
6af0bf9c
FB
48 target_ulong PFN[2];
49};
50#endif
51
52typedef struct CPUMIPSState CPUMIPSState;
53struct CPUMIPSState {
54 /* General integer registers */
55 target_ulong gpr[32];
56 /* Special registers */
57 target_ulong PC;
58 uint32_t HI, LO;
59 uint32_t DCR; /* ? */
60#if defined(MIPS_USES_FPU)
61 /* Floating point registers */
62 fpr_t fpr[16];
6ea83fed
FB
63#define FPR(cpu, n) ((fpr_t*)&(cpu)->fpr[(n) / 2])
64#define FPR_FD(cpu, n) (FPR(cpu, n)->fd)
65#define FPR_FS(cpu, n) (FPR(cpu, n)->fs[((n) & 1) ^ FP_ENDIAN_IDX])
66#define FPR_D(cpu, n) (FPR(cpu, n)->d)
67#define FPR_W(cpu, n) (FPR(cpu, n)->w[((n) & 1) ^ FP_ENDIAN_IDX])
68
69#ifndef USE_HOST_FLOAT_REGS
70 fpr_t ft0;
71 fpr_t ft1;
72 fpr_t ft2;
73#endif
74 float_status fp_status;
75 /* fpu implementation/revision register */
6af0bf9c 76 uint32_t fcr0;
6ea83fed
FB
77 /* fcsr */
78 uint32_t fcr31;
79#define SET_FP_COND(reg) do { (reg) |= (1<<23); } while(0)
80#define CLEAR_FP_COND(reg) do { (reg) &= ~(1<<23); } while(0)
81#define IS_FP_COND_SET(reg) (((reg) & (1<<23)) != 0)
82#define GET_FP_CAUSE(reg) (((reg) >> 12) & 0x3f)
83#define GET_FP_ENABLE(reg) (((reg) >> 7) & 0x1f)
84#define GET_FP_FLAGS(reg) (((reg) >> 2) & 0x1f)
85#define SET_FP_CAUSE(reg,v) do { (reg) = ((reg) & ~(0x3f << 12)) | ((v) << 12); } while(0)
86#define SET_FP_ENABLE(reg,v) do { (reg) = ((reg) & ~(0x1f << 7)) | ((v) << 7); } while(0)
87#define SET_FP_FLAGS(reg,v) do { (reg) = ((reg) & ~(0x1f << 2)) | ((v) << 2); } while(0)
88#define FP_INEXACT 1
89#define FP_UNDERFLOW 2
90#define FP_OVERFLOW 4
91#define FP_DIV0 8
92#define FP_INVALID 16
93#define FP_UNIMPLEMENTED 32
94
6af0bf9c
FB
95#endif
96#if defined(MIPS_USES_R4K_TLB)
814b9a47
TS
97 tlb_t tlb[MIPS_TLB_MAX];
98 uint32_t tlb_in_use;
6af0bf9c
FB
99#endif
100 uint32_t CP0_index;
101 uint32_t CP0_random;
102 uint32_t CP0_EntryLo0;
103 uint32_t CP0_EntryLo1;
104 uint32_t CP0_Context;
105 uint32_t CP0_PageMask;
106 uint32_t CP0_Wired;
107 uint32_t CP0_BadVAddr;
108 uint32_t CP0_Count;
109 uint32_t CP0_EntryHi;
110 uint32_t CP0_Compare;
111 uint32_t CP0_Status;
112#define CP0St_CU3 31
113#define CP0St_CU2 30
114#define CP0St_CU1 29
115#define CP0St_CU0 28
116#define CP0St_RP 27
6ea83fed 117#define CP0St_FR 26
6af0bf9c
FB
118#define CP0St_RE 25
119#define CP0St_BEV 22
120#define CP0St_TS 21
121#define CP0St_SR 20
122#define CP0St_NMI 19
123#define CP0St_IM 8
124#define CP0St_UM 4
125#define CP0St_ERL 2
126#define CP0St_EXL 1
127#define CP0St_IE 0
128 uint32_t CP0_Cause;
129#define CP0Ca_IV 23
130 uint32_t CP0_EPC;
131 uint32_t CP0_PRid;
132 uint32_t CP0_Config0;
133#define CP0C0_M 31
134#define CP0C0_K23 28
135#define CP0C0_KU 25
136#define CP0C0_MDU 20
137#define CP0C0_MM 17
138#define CP0C0_BM 16
139#define CP0C0_BE 15
140#define CP0C0_AT 13
141#define CP0C0_AR 10
142#define CP0C0_MT 7
143#define CP0C0_K0 0
144 uint32_t CP0_Config1;
145#define CP0C1_MMU 25
146#define CP0C1_IS 22
147#define CP0C1_IL 19
148#define CP0C1_IA 16
149#define CP0C1_DS 13
150#define CP0C1_DL 10
151#define CP0C1_DA 7
152#define CP0C1_PC 4
153#define CP0C1_WR 3
154#define CP0C1_CA 2
155#define CP0C1_EP 1
156#define CP0C1_FP 0
157 uint32_t CP0_LLAddr;
158 uint32_t CP0_WatchLo;
159 uint32_t CP0_WatchHi;
160 uint32_t CP0_Debug;
161#define CPDB_DBD 31
162#define CP0DB_DM 30
163#define CP0DB_LSNM 28
164#define CP0DB_Doze 27
165#define CP0DB_Halt 26
166#define CP0DB_CNT 25
167#define CP0DB_IBEP 24
168#define CP0DB_DBEP 21
169#define CP0DB_IEXI 20
170#define CP0DB_VER 15
171#define CP0DB_DEC 10
172#define CP0DB_SSt 8
173#define CP0DB_DINT 5
174#define CP0DB_DIB 4
175#define CP0DB_DDBS 3
176#define CP0DB_DDBL 2
177#define CP0DB_DBp 1
178#define CP0DB_DSS 0
179 uint32_t CP0_DEPC;
180 uint32_t CP0_TagLo;
181 uint32_t CP0_DataLo;
182 uint32_t CP0_ErrorEPC;
183 uint32_t CP0_DESAVE;
184 /* Qemu */
6af0bf9c
FB
185 int interrupt_request;
186 jmp_buf jmp_env;
187 int exception_index;
188 int error_code;
189 int user_mode_only; /* user mode only simulation */
190 uint32_t hflags; /* CPU State */
191 /* TMASK defines different execution modes */
56b19403 192#define MIPS_HFLAG_TMASK 0x007F
6af0bf9c
FB
193#define MIPS_HFLAG_MODE 0x001F /* execution modes */
194#define MIPS_HFLAG_UM 0x0001 /* user mode */
195#define MIPS_HFLAG_ERL 0x0002 /* Error mode */
196#define MIPS_HFLAG_EXL 0x0004 /* Exception mode */
197#define MIPS_HFLAG_DM 0x0008 /* Debug mode */
198#define MIPS_HFLAG_SM 0x0010 /* Supervisor mode */
199#define MIPS_HFLAG_RE 0x0040 /* Reversed endianness */
4ad40f36
FB
200 /* If translation is interrupted between the branch instruction and
201 * the delay slot, record what type of branch it is so that we can
202 * resume translation properly. It might be possible to reduce
203 * this from three bits to two. */
204#define MIPS_HFLAG_BMASK 0x0380
205#define MIPS_HFLAG_B 0x0080 /* Unconditional branch */
206#define MIPS_HFLAG_BC 0x0100 /* Conditional branch */
207#define MIPS_HFLAG_BL 0x0180 /* Likely branch */
208#define MIPS_HFLAG_BR 0x0200 /* branch to register (can't link TB) */
6af0bf9c
FB
209 target_ulong btarget; /* Jump / branch target */
210 int bcond; /* Branch condition (if needed) */
a316d335 211
4ad40f36
FB
212 int halted; /* TRUE if the CPU is in suspend state */
213
a316d335 214 CPU_COMMON
6ae81775
TS
215
216 int ram_size;
217 const char *kernel_filename;
218 const char *kernel_cmdline;
219 const char *initrd_filename;
220
221 struct QEMUTimer *timer; /* Internal timer */
6af0bf9c
FB
222};
223
224#include "cpu-all.h"
225
226/* Memory access type :
227 * may be needed for precise access rights control and precise exceptions.
228 */
229enum {
230 /* 1 bit to define user level / supervisor access */
231 ACCESS_USER = 0x00,
232 ACCESS_SUPER = 0x01,
233 /* 1 bit to indicate direction */
234 ACCESS_STORE = 0x02,
235 /* Type of instruction that generated the access */
236 ACCESS_CODE = 0x10, /* Code fetch access */
237 ACCESS_INT = 0x20, /* Integer load/store access */
238 ACCESS_FLOAT = 0x30, /* floating point load/store access */
239};
240
241/* Exceptions */
242enum {
243 EXCP_NONE = -1,
244 EXCP_RESET = 0,
245 EXCP_SRESET,
246 EXCP_DSS,
247 EXCP_DINT,
248 EXCP_NMI,
249 EXCP_MCHECK,
250 EXCP_EXT_INTERRUPT,
251 EXCP_DFWATCH,
252 EXCP_DIB, /* 8 */
253 EXCP_IWATCH,
254 EXCP_AdEL,
255 EXCP_AdES,
256 EXCP_TLBF,
257 EXCP_IBE,
258 EXCP_DBp,
259 EXCP_SYSCALL,
4ad40f36
FB
260 EXCP_BREAK, /* 16 */
261 EXCP_CpU,
6af0bf9c
FB
262 EXCP_RI,
263 EXCP_OVERFLOW,
264 EXCP_TRAP,
265 EXCP_DDBS,
266 EXCP_DWATCH,
4ad40f36
FB
267 EXCP_LAE,
268 EXCP_SAE, /* 24 */
6af0bf9c
FB
269 EXCP_LTLBL,
270 EXCP_TLBL,
271 EXCP_TLBS,
272 EXCP_DBE,
273 EXCP_DDBL,
274 EXCP_MTCP0 = 0x104, /* mtmsr instruction: */
275 /* may change privilege level */
276 EXCP_BRANCH = 0x108, /* branch instruction */
277 EXCP_ERET = 0x10C, /* return from interrupt */
278 EXCP_SYSCALL_USER = 0x110, /* System call in user mode only */
279 EXCP_FLUSH = 0x109,
280};
281
6af0bf9c
FB
282int cpu_mips_exec(CPUMIPSState *s);
283CPUMIPSState *cpu_mips_init(void);
284uint32_t cpu_mips_get_clock (void);
285
286#endif /* !defined (__MIPS_CPU_H__) */
This page took 0.091346 seconds and 4 git commands to generate.