]> Git Repo - qemu.git/blame - hw/spitz.c
projects / qemu.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Set boot sequence from command line (Dan Kenigsberg).
[qemu.git] / hw / spitz.c
CommitLineData
b00052e4
AZ		 1/*
2 * PXA270-based Clamshell PDA platforms.
3 *
4 * Copyright (c) 2006 Openedhand Ltd.
5 * Written by Andrzej Zaborowski <[email protected]>
6 *
7 * This code is licensed under the GNU GPL v2.
8 */
9
10#include "vl.h"
11
12#define spitz_printf(format, ...) \
13 fprintf(stderr, "%s: " format, __FUNCTION__, ##__VA_ARGS__)
14#undef REG_FMT
15#define REG_FMT "0x%02lx"
16
17/* Spitz Flash */
18#define FLASH_BASE 0x0c000000
19#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */
20#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */
21#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */
22#define FLASH_ECCCNTR 0x0c /* ECC byte counter */
23#define FLASH_ECCCLRR 0x10 /* Clear ECC */
24#define FLASH_FLASHIO 0x14 /* Flash I/O */
25#define FLASH_FLASHCTL 0x18 /* Flash Control */
26
27#define FLASHCTL_CE0 (1 << 0)
28#define FLASHCTL_CLE (1 << 1)
29#define FLASHCTL_ALE (1 << 2)
30#define FLASHCTL_WP (1 << 3)
31#define FLASHCTL_CE1 (1 << 4)
32#define FLASHCTL_RYBY (1 << 5)
33#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1)
34
35struct sl_nand_s {
36 target_phys_addr_t target_base;
37 struct nand_flash_s *nand;
38 uint8_t ctl;
39 struct ecc_state_s ecc;
40};
41
42static uint32_t sl_readb(void *opaque, target_phys_addr_t addr)
43{
44 struct sl_nand_s *s = (struct sl_nand_s *) opaque;
45 int ryby;
46 addr -= s->target_base;
47
48 switch (addr) {
49#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to))
50 case FLASH_ECCLPLB:
51 return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) |
52 BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7);
53
54#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to))
55 case FLASH_ECCLPUB:
56 return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) |
57 BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7);
58
59 case FLASH_ECCCP:
60 return s->ecc.cp;
61
62 case FLASH_ECCCNTR:
63 return s->ecc.count & 0xff;
64
65 case FLASH_FLASHCTL:
66 nand_getpins(s->nand, &ryby);
67 if (ryby)
68 return s->ctl | FLASHCTL_RYBY;
69 else
70 return s->ctl;
71
72 case FLASH_FLASHIO:
73 return ecc_digest(&s->ecc, nand_getio(s->nand));
74
75 default:
76 spitz_printf("Bad register offset " REG_FMT "\n", addr);
77 }
78 return 0;
79}
80
a5236105
AZ		 81static uint32_t sl_readl(void *opaque, target_phys_addr_t addr)
82{
83 struct sl_nand_s *s = (struct sl_nand_s *) opaque;
84 addr -= s->target_base;
85
86 if (addr == FLASH_FLASHIO)
87 return ecc_digest(&s->ecc, nand_getio(s->nand)) |
88 (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16);
89
90 return sl_readb(opaque, addr);
91}
92
b00052e4
AZ		 93static void sl_writeb(void *opaque, target_phys_addr_t addr,
94 uint32_t value)
95{
96 struct sl_nand_s *s = (struct sl_nand_s *) opaque;
97 addr -= s->target_base;
98
99 switch (addr) {
100 case FLASH_ECCCLRR:
101 /* Value is ignored. */
102 ecc_reset(&s->ecc);
103 break;
104
105 case FLASH_FLASHCTL:
106 s->ctl = value & 0xff & ~FLASHCTL_RYBY;
107 nand_setpins(s->nand,
108 s->ctl & FLASHCTL_CLE,
109 s->ctl & FLASHCTL_ALE,
110 s->ctl & FLASHCTL_NCE,
111 s->ctl & FLASHCTL_WP,
112 0);
113 break;
114
115 case FLASH_FLASHIO:
116 nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff));
117 break;
118
119 default:
120 spitz_printf("Bad register offset " REG_FMT "\n", addr);
121 }
122}
123
aa941b94
AZ		 124static void sl_save(QEMUFile *f, void *opaque)
125{
126 struct sl_nand_s *s = (struct sl_nand_s *) opaque;
127
128 qemu_put_8s(f, &s->ctl);
129 ecc_put(f, &s->ecc);
130}
131
132static int sl_load(QEMUFile *f, void *opaque, int version_id)
133{
134 struct sl_nand_s *s = (struct sl_nand_s *) opaque;
135
136 qemu_get_8s(f, &s->ctl);
137 ecc_get(f, &s->ecc);
138
139 return 0;
140}
141
b00052e4
AZ		 142enum {
143 FLASH_128M,
144 FLASH_1024M,
145};
146
147static void sl_flash_register(struct pxa2xx_state_s *cpu, int size)
148{
149 int iomemtype;
150 struct sl_nand_s *s;
151 CPUReadMemoryFunc *sl_readfn[] = {
152 sl_readb,
153 sl_readb,
a5236105 154 sl_readl,
b00052e4
AZ		 155 };
156 CPUWriteMemoryFunc *sl_writefn[] = {
157 sl_writeb,
158 sl_writeb,
159 sl_writeb,
160 };
161
162 s = (struct sl_nand_s *) qemu_mallocz(sizeof(struct sl_nand_s));
163 s->target_base = FLASH_BASE;
164 s->ctl = 0;
165 if (size == FLASH_128M)
166 s->nand = nand_init(NAND_MFR_SAMSUNG, 0x73);
167 else if (size == FLASH_1024M)
168 s->nand = nand_init(NAND_MFR_SAMSUNG, 0xf1);
169
170 iomemtype = cpu_register_io_memory(0, sl_readfn,
171 sl_writefn, s);
172 cpu_register_physical_memory(s->target_base, 0x40, iomemtype);
aa941b94
AZ		 173
174 register_savevm("sl_flash", 0, 0, sl_save, sl_load, s);
b00052e4
AZ		 175}
176
177/* Spitz Keyboard */
178
179#define SPITZ_KEY_STROBE_NUM 11
180#define SPITZ_KEY_SENSE_NUM 7
181
182static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = {
183 12, 17, 91, 34, 36, 38, 39
184};
185
186static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = {
187 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114
188};
189
190/* Eighth additional row maps the special keys */
191static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = {
192 { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 },
193 { -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 },
194 { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25, -1 , -1 , -1 },
195 { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26, -1 , 0x36, -1 },
196 { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34, -1 , 0x1c, 0x2a, -1 },
2b76bdc9
AZ		 197 { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x38 },
198 { 0x37, 0x3d, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 },
b00052e4
AZ		 199 { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 },
200};
201
202#define SPITZ_GPIO_AK_INT 13 /* Remote control */
203#define SPITZ_GPIO_SYNC 16 /* Sync button */
204#define SPITZ_GPIO_ON_KEY 95 /* Power button */
205#define SPITZ_GPIO_SWA 97 /* Lid */
206#define SPITZ_GPIO_SWB 96 /* Tablet mode */
207
208/* The special buttons are mapped to unused keys */
209static const int spitz_gpiomap[5] = {
210 SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY,
211 SPITZ_GPIO_SWA, SPITZ_GPIO_SWB,
212};
213static int spitz_gpio_invert[5] = { 0, 0, 0, 0, 0, };
214
215struct spitz_keyboard_s {
216 struct pxa2xx_state_s *cpu;
217 int keymap[0x80];
218 uint16_t keyrow[SPITZ_KEY_SENSE_NUM];
219 uint16_t strobe_state;
220 uint16_t sense_state;
221
222 uint16_t pre_map[0x100];
223 uint16_t modifiers;
224 uint16_t imodifiers;
225 uint8_t fifo[16];
226 int fifopos, fifolen;
227 QEMUTimer *kbdtimer;
228};
229
230static void spitz_keyboard_sense_update(struct spitz_keyboard_s *s)
231{
232 int i;
233 uint16_t strobe, sense = 0;
234 for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) {
235 strobe = s->keyrow[i] & s->strobe_state;
236 if (strobe) {
237 sense |= 1 << i;
238 if (!(s->sense_state & (1 << i)))
239 pxa2xx_gpio_set(s->cpu->gpio, spitz_gpio_key_sense[i], 1);
240 } else if (s->sense_state & (1 << i))
241 pxa2xx_gpio_set(s->cpu->gpio, spitz_gpio_key_sense[i], 0);
242 }
243
244 s->sense_state = sense;
245}
246
247static void spitz_keyboard_strobe(int line, int level,
248 struct spitz_keyboard_s *s)
249{
250 int i;
251 for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)
252 if (spitz_gpio_key_strobe[i] == line) {
253 if (level)
254 s->strobe_state |= 1 << i;
255 else
256 s->strobe_state &= ~(1 << i);
257
258 spitz_keyboard_sense_update(s);
259 break;
260 }
261}
262
263static void spitz_keyboard_keydown(struct spitz_keyboard_s *s, int keycode)
264{
265 int spitz_keycode = s->keymap[keycode & 0x7f];
266 if (spitz_keycode == -1)
267 return;
268
269 /* Handle the additional keys */
270 if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) {
271 pxa2xx_gpio_set(s->cpu->gpio, spitz_gpiomap[spitz_keycode & 0xf],
272 (keycode < 0x80) ^
273 spitz_gpio_invert[spitz_keycode & 0xf]);
274 return;
275 }
276
277 if (keycode & 0x80)
278 s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf));
279 else
280 s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf);
281
282 spitz_keyboard_sense_update(s);
283}
284
285#define SHIFT (1 << 7)
286#define CTRL (1 << 8)
287#define FN (1 << 9)
288
289#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c
290
291static void spitz_keyboard_handler(struct spitz_keyboard_s *s, int keycode)
292{
293 uint16_t code;
294 int mapcode;
295 switch (keycode) {
296 case 0x2a: /* Left Shift */
297 s->modifiers |= 1;
298 break;
299 case 0xaa:
300 s->modifiers &= ~1;
301 break;
302 case 0x36: /* Right Shift */
303 s->modifiers |= 2;
304 break;
305 case 0xb6:
306 s->modifiers &= ~2;
307 break;
308 case 0x1d: /* Control */
309 s->modifiers |= 4;
310 break;
311 case 0x9d:
312 s->modifiers &= ~4;
313 break;
314 case 0x38: /* Alt */
315 s->modifiers |= 8;
316 break;
317 case 0xb8:
318 s->modifiers &= ~8;
319 break;
320 }
321
322 code = s->pre_map[mapcode = ((s->modifiers & 3) ?
323 (keycode | SHIFT) :
324 (keycode & ~SHIFT))];
325
326 if (code != mapcode) {
327#if 0
328 if ((code & SHIFT) && !(s->modifiers & 1))
329 QUEUE_KEY(0x2a | (keycode & 0x80));
330 if ((code & CTRL ) && !(s->modifiers & 4))
331 QUEUE_KEY(0x1d | (keycode & 0x80));
332 if ((code & FN ) && !(s->modifiers & 8))
333 QUEUE_KEY(0x38 | (keycode & 0x80));
334 if ((code & FN ) && (s->modifiers & 1))
335 QUEUE_KEY(0x2a | (~keycode & 0x80));
336 if ((code & FN ) && (s->modifiers & 2))
337 QUEUE_KEY(0x36 | (~keycode & 0x80));
338#else
339 if (keycode & 0x80) {
340 if ((s->imodifiers & 1 ) && !(s->modifiers & 1))
341 QUEUE_KEY(0x2a | 0x80);
342 if ((s->imodifiers & 4 ) && !(s->modifiers & 4))
343 QUEUE_KEY(0x1d | 0x80);
344 if ((s->imodifiers & 8 ) && !(s->modifiers & 8))
345 QUEUE_KEY(0x38 | 0x80);
346 if ((s->imodifiers & 0x10) && (s->modifiers & 1))
347 QUEUE_KEY(0x2a);
348 if ((s->imodifiers & 0x20) && (s->modifiers & 2))
349 QUEUE_KEY(0x36);
350 s->imodifiers = 0;
351 } else {
352 if ((code & SHIFT) && !((s->modifiers | s->imodifiers) & 1)) {
353 QUEUE_KEY(0x2a);
354 s->imodifiers |= 1;
355 }
356 if ((code & CTRL ) && !((s->modifiers | s->imodifiers) & 4)) {
357 QUEUE_KEY(0x1d);
358 s->imodifiers |= 4;
359 }
360 if ((code & FN ) && !((s->modifiers | s->imodifiers) & 8)) {
361 QUEUE_KEY(0x38);
362 s->imodifiers |= 8;
363 }
364 if ((code & FN ) && (s->modifiers & 1) &&
365 !(s->imodifiers & 0x10)) {
366 QUEUE_KEY(0x2a | 0x80);
367 s->imodifiers |= 0x10;
368 }
369 if ((code & FN ) && (s->modifiers & 2) &&
370 !(s->imodifiers & 0x20)) {
371 QUEUE_KEY(0x36 | 0x80);
372 s->imodifiers |= 0x20;
373 }
374 }
375#endif
376 }
377
378 QUEUE_KEY((code & 0x7f) | (keycode & 0x80));
379}
380
381static void spitz_keyboard_tick(void *opaque)
382{
383 struct spitz_keyboard_s *s = (struct spitz_keyboard_s *) opaque;
384
385 if (s->fifolen) {
386 spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]);
387 s->fifolen --;
388 if (s->fifopos >= 16)
389 s->fifopos = 0;
390 }
391
392 qemu_mod_timer(s->kbdtimer, qemu_get_clock(vm_clock) + ticks_per_sec / 32);
393}
394
395static void spitz_keyboard_pre_map(struct spitz_keyboard_s *s)
396{
397 int i;
398 for (i = 0; i < 0x100; i ++)
399 s->pre_map[i] = i;
400 s->pre_map[0x02 | SHIFT ] = 0x02 | SHIFT; /* exclam */
401 s->pre_map[0x28 | SHIFT ] = 0x03 | SHIFT; /* quotedbl */
402 s->pre_map[0x04 | SHIFT ] = 0x04 | SHIFT; /* numbersign */
403 s->pre_map[0x05 | SHIFT ] = 0x05 | SHIFT; /* dollar */
404 s->pre_map[0x06 | SHIFT ] = 0x06 | SHIFT; /* percent */
405 s->pre_map[0x08 | SHIFT ] = 0x07 | SHIFT; /* ampersand */
406 s->pre_map[0x28 ] = 0x08 | SHIFT; /* apostrophe */
407 s->pre_map[0x0a | SHIFT ] = 0x09 | SHIFT; /* parenleft */
408 s->pre_map[0x0b | SHIFT ] = 0x0a | SHIFT; /* parenright */
409 s->pre_map[0x29 | SHIFT ] = 0x0b | SHIFT; /* asciitilde */
410 s->pre_map[0x03 | SHIFT ] = 0x0c | SHIFT; /* at */
411 s->pre_map[0xd3 ] = 0x0e | FN; /* Delete */
412 s->pre_map[0x3a ] = 0x0f | FN; /* Caps_Lock */
413 s->pre_map[0x07 | SHIFT ] = 0x11 | FN; /* asciicircum */
414 s->pre_map[0x0d ] = 0x12 | FN; /* equal */
415 s->pre_map[0x0d | SHIFT ] = 0x13 | FN; /* plus */
416 s->pre_map[0x1a ] = 0x14 | FN; /* bracketleft */
417 s->pre_map[0x1b ] = 0x15 | FN; /* bracketright */
2b76bdc9
AZ		 418 s->pre_map[0x1a | SHIFT ] = 0x16 | FN; /* braceleft */
419 s->pre_map[0x1b | SHIFT ] = 0x17 | FN; /* braceright */
b00052e4
AZ		 420 s->pre_map[0x27 ] = 0x22 | FN; /* semicolon */
421 s->pre_map[0x27 | SHIFT ] = 0x23 | FN; /* colon */
422 s->pre_map[0x09 | SHIFT ] = 0x24 | FN; /* asterisk */
423 s->pre_map[0x2b ] = 0x25 | FN; /* backslash */
424 s->pre_map[0x2b | SHIFT ] = 0x26 | FN; /* bar */
425 s->pre_map[0x0c | SHIFT ] = 0x30 | FN; /* underscore */
2b76bdc9 426 s->pre_map[0x33 | SHIFT ] = 0x33 | FN; /* less */
b00052e4 427 s->pre_map[0x35 ] = 0x33 | SHIFT; /* slash */
2b76bdc9 428 s->pre_map[0x34 | SHIFT ] = 0x34 | FN; /* greater */
b00052e4
AZ		 429 s->pre_map[0x35 | SHIFT ] = 0x34 | SHIFT; /* question */
430 s->pre_map[0x49 ] = 0x48 | FN; /* Page_Up */
431 s->pre_map[0x51 ] = 0x50 | FN; /* Page_Down */
432
433 s->modifiers = 0;
434 s->imodifiers = 0;
435 s->fifopos = 0;
436 s->fifolen = 0;
437 s->kbdtimer = qemu_new_timer(vm_clock, spitz_keyboard_tick, s);
438 spitz_keyboard_tick(s);
439}
440
441#undef SHIFT
442#undef CTRL
443#undef FN
444
aa941b94
AZ		 445static void spitz_keyboard_save(QEMUFile *f, void *opaque)
446{
447 struct spitz_keyboard_s *s = (struct spitz_keyboard_s *) opaque;
448 int i;
449
450 qemu_put_be16s(f, &s->sense_state);
451 qemu_put_be16s(f, &s->strobe_state);
452 for (i = 0; i < 5; i ++)
453 qemu_put_byte(f, spitz_gpio_invert[i]);
454}
455
456static int spitz_keyboard_load(QEMUFile *f, void *opaque, int version_id)
457{
458 struct spitz_keyboard_s *s = (struct spitz_keyboard_s *) opaque;
459 int i;
460
461 qemu_get_be16s(f, &s->sense_state);
462 qemu_get_be16s(f, &s->strobe_state);
463 for (i = 0; i < 5; i ++)
464 spitz_gpio_invert[i] = qemu_get_byte(f);
465
466 /* Release all pressed keys */
467 memset(s->keyrow, 0, sizeof(s->keyrow));
468 spitz_keyboard_sense_update(s);
469 s->modifiers = 0;
470 s->imodifiers = 0;
471 s->fifopos = 0;
472 s->fifolen = 0;
473
474 return 0;
475}
476
b00052e4
AZ		 477static void spitz_keyboard_register(struct pxa2xx_state_s *cpu)
478{
479 int i, j;
480 struct spitz_keyboard_s *s;
481
482 s = (struct spitz_keyboard_s *)
483 qemu_mallocz(sizeof(struct spitz_keyboard_s));
484 memset(s, 0, sizeof(struct spitz_keyboard_s));
485 s->cpu = cpu;
486
487 for (i = 0; i < 0x80; i ++)
488 s->keymap[i] = -1;
489 for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++)
490 for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++)
491 if (spitz_keymap[i][j] != -1)
492 s->keymap[spitz_keymap[i][j]] = (i << 4) | j;
493
494 for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)
495 pxa2xx_gpio_handler_set(cpu->gpio, spitz_gpio_key_strobe[i],
496 (gpio_handler_t) spitz_keyboard_strobe, s);
497
498 spitz_keyboard_pre_map(s);
499 qemu_add_kbd_event_handler((QEMUPutKBDEvent *) spitz_keyboard_handler, s);
aa941b94
AZ		 500
501 register_savevm("spitz_keyboard", 0, 0,
502 spitz_keyboard_save, spitz_keyboard_load, s);
b00052e4
AZ		 503}
504
505/* SCOOP devices */
506
507struct scoop_info_s {
508 target_phys_addr_t target_base;
509 uint16_t status;
510 uint16_t power;
511 uint32_t gpio_level;
512 uint32_t gpio_dir;
513 uint32_t prev_level;
514 struct {
515 gpio_handler_t fn;
516 void *opaque;
517 } handler[16];
518
519 uint16_t mcr;
520 uint16_t cdr;
521 uint16_t ccr;
522 uint16_t irr;
523 uint16_t imr;
524 uint16_t isr;
525 uint16_t gprr;
526};
527
528#define SCOOP_MCR 0x00
529#define SCOOP_CDR 0x04
530#define SCOOP_CSR 0x08
531#define SCOOP_CPR 0x0c
532#define SCOOP_CCR 0x10
533#define SCOOP_IRR_IRM 0x14
534#define SCOOP_IMR 0x18
535#define SCOOP_ISR 0x1c
536#define SCOOP_GPCR 0x20
537#define SCOOP_GPWR 0x24
538#define SCOOP_GPRR 0x28
539
540static inline void scoop_gpio_handler_update(struct scoop_info_s *s) {
541 uint32_t level, diff;
542 int bit;
543 level = s->gpio_level & s->gpio_dir;
544
545 for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
546 bit = ffs(diff) - 1;
547 if (s->handler[bit].fn)
548 s->handler[bit].fn(bit, (level >> bit) & 1,
549 s->handler[bit].opaque);
550 }
551
552 s->prev_level = level;
553}
554
555static uint32_t scoop_readb(void *opaque, target_phys_addr_t addr)
556{
557 struct scoop_info_s *s = (struct scoop_info_s *) opaque;
558 addr -= s->target_base;
559
560 switch (addr) {
561 case SCOOP_MCR:
562 return s->mcr;
563 case SCOOP_CDR:
564 return s->cdr;
565 case SCOOP_CSR:
566 return s->status;
567 case SCOOP_CPR:
568 return s->power;
569 case SCOOP_CCR:
570 return s->ccr;
571 case SCOOP_IRR_IRM:
572 return s->irr;
573 case SCOOP_IMR:
574 return s->imr;
575 case SCOOP_ISR:
576 return s->isr;
577 case SCOOP_GPCR:
578 return s->gpio_dir;
579 case SCOOP_GPWR:
580 return s->gpio_level;
581 case SCOOP_GPRR:
582 return s->gprr;
583 default:
584 spitz_printf("Bad register offset " REG_FMT "\n", addr);
585 }
586
587 return 0;
588}
589
590static void scoop_writeb(void *opaque, target_phys_addr_t addr, uint32_t value)
591{
592 struct scoop_info_s *s = (struct scoop_info_s *) opaque;
593 addr -= s->target_base;
594 value &= 0xffff;
595
596 switch (addr) {
597 case SCOOP_MCR:
598 s->mcr = value;
599 break;
600 case SCOOP_CDR:
601 s->cdr = value;
602 break;
603 case SCOOP_CPR:
604 s->power = value;
605 if (value & 0x80)
606 s->power |= 0x8040;
607 break;
608 case SCOOP_CCR:
609 s->ccr = value;
610 break;
611 case SCOOP_IRR_IRM:
612 s->irr = value;
613 break;
614 case SCOOP_IMR:
615 s->imr = value;
616 break;
617 case SCOOP_ISR:
618 s->isr = value;
619 break;
620 case SCOOP_GPCR:
621 s->gpio_dir = value;
622 scoop_gpio_handler_update(s);
623 break;
624 case SCOOP_GPWR:
625 s->gpio_level = value & s->gpio_dir;
626 scoop_gpio_handler_update(s);
627 break;
628 case SCOOP_GPRR:
629 s->gprr = value;
630 break;
631 default:
632 spitz_printf("Bad register offset " REG_FMT "\n", addr);
633 }
634}
635
636CPUReadMemoryFunc *scoop_readfn[] = {
637 scoop_readb,
638 scoop_readb,
639 scoop_readb,
640};
641CPUWriteMemoryFunc *scoop_writefn[] = {
642 scoop_writeb,
643 scoop_writeb,
644 scoop_writeb,
645};
646
647static inline void scoop_gpio_set(struct scoop_info_s *s, int line, int level)
648{
649 if (line >= 16) {
650 spitz_printf("No GPIO pin %i\n", line);
651 return;
652 }
653
654 if (level)
655 s->gpio_level |= (1 << line);
656 else
657 s->gpio_level &= ~(1 << line);
658}
659
660static inline void scoop_gpio_handler_set(struct scoop_info_s *s, int line,
661 gpio_handler_t handler, void *opaque) {
662 if (line >= 16) {
663 spitz_printf("No GPIO pin %i\n", line);
664 return;
665 }
666
667 s->handler[line].fn = handler;
668 s->handler[line].opaque = opaque;
669}
670
aa941b94
AZ		 671static void scoop_save(QEMUFile *f, void *opaque)
672{
673 struct scoop_info_s *s = (struct scoop_info_s *) opaque;
674 qemu_put_be16s(f, &s->status);
675 qemu_put_be16s(f, &s->power);
676 qemu_put_be32s(f, &s->gpio_level);
677 qemu_put_be32s(f, &s->gpio_dir);
678 qemu_put_be32s(f, &s->prev_level);
679 qemu_put_be16s(f, &s->mcr);
680 qemu_put_be16s(f, &s->cdr);
681 qemu_put_be16s(f, &s->ccr);
682 qemu_put_be16s(f, &s->irr);
683 qemu_put_be16s(f, &s->imr);
684 qemu_put_be16s(f, &s->isr);
685 qemu_put_be16s(f, &s->gprr);
686}
687
688static int scoop_load(QEMUFile *f, void *opaque, int version_id)
689{
690 struct scoop_info_s *s = (struct scoop_info_s *) opaque;
691 qemu_get_be16s(f, &s->status);
692 qemu_get_be16s(f, &s->power);
693 qemu_get_be32s(f, &s->gpio_level);
694 qemu_get_be32s(f, &s->gpio_dir);
695 qemu_get_be32s(f, &s->prev_level);
696 qemu_get_be16s(f, &s->mcr);
697 qemu_get_be16s(f, &s->cdr);
698 qemu_get_be16s(f, &s->ccr);
699 qemu_get_be16s(f, &s->irr);
700 qemu_get_be16s(f, &s->imr);
701 qemu_get_be16s(f, &s->isr);
702 qemu_get_be16s(f, &s->gprr);
703
704 return 0;
705}
706
b00052e4
AZ		 707static struct scoop_info_s *spitz_scoop_init(struct pxa2xx_state_s *cpu,
708 int count) {
709 int iomemtype;
710 struct scoop_info_s *s;
711
712 s = (struct scoop_info_s *)
713 qemu_mallocz(sizeof(struct scoop_info_s) * 2);
714 memset(s, 0, sizeof(struct scoop_info_s) * count);
715 s[0].target_base = 0x10800000;
716 s[1].target_base = 0x08800040;
717
718 /* Ready */
719 s[0].status = 0x02;
720 s[1].status = 0x02;
721
722 iomemtype = cpu_register_io_memory(0, scoop_readfn,
723 scoop_writefn, &s[0]);
187337f8 724 cpu_register_physical_memory(s[0].target_base, 0x1000, iomemtype);
aa941b94 725 register_savevm("scoop", 0, 0, scoop_save, scoop_load, &s[0]);
b00052e4
AZ		 726
727 if (count < 2)
728 return s;
729
730 iomemtype = cpu_register_io_memory(0, scoop_readfn,
731 scoop_writefn, &s[1]);
187337f8 732 cpu_register_physical_memory(s[1].target_base, 0x1000, iomemtype);
aa941b94 733 register_savevm("scoop", 1, 0, scoop_save, scoop_load, &s[1]);
b00052e4
AZ		 734
735 return s;
736}
737
738/* LCD backlight controller */
739
740#define LCDTG_RESCTL 0x00
741#define LCDTG_PHACTRL 0x01
742#define LCDTG_DUTYCTRL 0x02
743#define LCDTG_POWERREG0 0x03
744#define LCDTG_POWERREG1 0x04
745#define LCDTG_GPOR3 0x05
746#define LCDTG_PICTRL 0x06
747#define LCDTG_POLCTRL 0x07
748
749static int bl_intensity, bl_power;
750
751static void spitz_bl_update(struct pxa2xx_state_s *s)
752{
753 if (bl_power && bl_intensity)
754 spitz_printf("LCD Backlight now at %i/63\n", bl_intensity);
755 else
756 spitz_printf("LCD Backlight now off\n");
757}
758
759static void spitz_bl_bit5(int line, int level, void *opaque)
760{
761 int prev = bl_intensity;
762
763 if (level)
764 bl_intensity &= ~0x20;
765 else
766 bl_intensity |= 0x20;
767
768 if (bl_power && prev != bl_intensity)
769 spitz_bl_update((struct pxa2xx_state_s *) opaque);
770}
771
772static void spitz_bl_power(int line, int level, void *opaque)
773{
774 bl_power = !!level;
775 spitz_bl_update((struct pxa2xx_state_s *) opaque);
776}
777
778static void spitz_lcdtg_dac_put(void *opaque, uint8_t cmd)
779{
780 int addr, value;
781 addr = cmd >> 5;
782 value = cmd & 0x1f;
783
784 switch (addr) {
785 case LCDTG_RESCTL:
786 if (value)
787 spitz_printf("LCD in QVGA mode\n");
788 else
789 spitz_printf("LCD in VGA mode\n");
790 break;
791
792 case LCDTG_DUTYCTRL:
793 bl_intensity &= ~0x1f;
794 bl_intensity |= value;
795 if (bl_power)
796 spitz_bl_update((struct pxa2xx_state_s *) opaque);
797 break;
798
799 case LCDTG_POWERREG0:
800 /* Set common voltage to M62332FP */
801 break;
802 }
803}
804
805/* SSP devices */
806
807#define CORGI_SSP_PORT 2
808
809#define SPITZ_GPIO_LCDCON_CS 53
810#define SPITZ_GPIO_ADS7846_CS 14
811#define SPITZ_GPIO_MAX1111_CS 20
812#define SPITZ_GPIO_TP_INT 11
813
814static int lcd_en, ads_en, max_en;
815static struct max111x_s *max1111;
816static struct ads7846_state_s *ads7846;
817
818/* "Demux" the signal based on current chipselect */
819static uint32_t corgi_ssp_read(void *opaque)
820{
821 if (lcd_en)
822 return 0;
823 if (ads_en)
824 return ads7846_read(ads7846);
825 if (max_en)
826 return max111x_read(max1111);
827 return 0;
828}
829
830static void corgi_ssp_write(void *opaque, uint32_t value)
831{
832 if (lcd_en)
833 spitz_lcdtg_dac_put(opaque, value);
834 if (ads_en)
835 ads7846_write(ads7846, value);
836 if (max_en)
837 max111x_write(max1111, value);
838}
839
840static void corgi_ssp_gpio_cs(int line, int level, struct pxa2xx_state_s *s)
841{
842 if (line == SPITZ_GPIO_LCDCON_CS)
843 lcd_en = !level;
844 else if (line == SPITZ_GPIO_ADS7846_CS)
845 ads_en = !level;
846 else if (line == SPITZ_GPIO_MAX1111_CS)
847 max_en = !level;
848}
849
850#define MAX1111_BATT_VOLT 1
851#define MAX1111_BATT_TEMP 2
852#define MAX1111_ACIN_VOLT 3
853
854#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */
855#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */
856#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */
857
858static void spitz_adc_temp_on(int line, int level, void *opaque)
859{
860 if (!max1111)
861 return;
862
863 if (level)
864 max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP);
865 else
866 max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);
867}
868
869static void spitz_pendown_set(void *opaque, int line, int level)
870{
871 struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
872 pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_TP_INT, level);
873}
874
aa941b94
AZ		 875static void spitz_ssp_save(QEMUFile *f, void *opaque)
876{
877 qemu_put_be32(f, lcd_en);
878 qemu_put_be32(f, ads_en);
879 qemu_put_be32(f, max_en);
880 qemu_put_be32(f, bl_intensity);
881 qemu_put_be32(f, bl_power);
882}
883
884static int spitz_ssp_load(QEMUFile *f, void *opaque, int version_id)
885{
886 lcd_en = qemu_get_be32(f);
887 ads_en = qemu_get_be32(f);
888 max_en = qemu_get_be32(f);
889 bl_intensity = qemu_get_be32(f);
890 bl_power = qemu_get_be32(f);
891
892 return 0;
893}
894
b00052e4
AZ		 895static void spitz_ssp_attach(struct pxa2xx_state_s *cpu)
896{
897 lcd_en = ads_en = max_en = 0;
898
899 ads7846 = ads7846_init(qemu_allocate_irqs(spitz_pendown_set, cpu, 1)[0]);
900
901 max1111 = max1111_init(0);
902 max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT);
903 max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);
904 max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN);
905
906 pxa2xx_ssp_attach(cpu->ssp[CORGI_SSP_PORT - 1], corgi_ssp_read,
907 corgi_ssp_write, cpu);
908
909 pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_LCDCON_CS,
910 (gpio_handler_t) corgi_ssp_gpio_cs, cpu);
911 pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_ADS7846_CS,
912 (gpio_handler_t) corgi_ssp_gpio_cs, cpu);
913 pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_MAX1111_CS,
914 (gpio_handler_t) corgi_ssp_gpio_cs, cpu);
915
916 bl_intensity = 0x20;
917 bl_power = 0;
aa941b94
AZ		 918
919 register_savevm("spitz_ssp", 0, 0, spitz_ssp_save, spitz_ssp_load, cpu);
b00052e4
AZ		 920}
921
922/* CF Microdrive */
923
924static void spitz_microdrive_attach(struct pxa2xx_state_s *cpu)
925{
926 struct pcmcia_card_s *md;
927 BlockDriverState *bs = bs_table[0];
928
929 if (bs && bdrv_is_inserted(bs) && !bdrv_is_removable(bs)) {
930 md = dscm1xxxx_init(bs);
bf5ee248 931 pxa2xx_pcmcia_attach(cpu->pcmcia[1], md);
b00052e4
AZ		 932 }
933}
934
adb86c37
AZ		 935/* Wm8750 and Max7310 on I2C */
936
937#define AKITA_MAX_ADDR 0x18
611d7189
AZ		 938#define SPITZ_WM_ADDRL 0x1b
939#define SPITZ_WM_ADDRH 0x1a
adb86c37
AZ		 940
941#define SPITZ_GPIO_WM 5
942
943#ifdef HAS_AUDIO
944static void spitz_wm8750_addr(int line, int level, void *opaque)
945{
946 i2c_slave *wm = (i2c_slave *) opaque;
947 if (level)
948 i2c_set_slave_address(wm, SPITZ_WM_ADDRH);
949 else
950 i2c_set_slave_address(wm, SPITZ_WM_ADDRL);
951}
952#endif
953
954static void spitz_i2c_setup(struct pxa2xx_state_s *cpu)
955{
956 /* Attach the CPU on one end of our I2C bus. */
957 i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
958
959#ifdef HAS_AUDIO
960 AudioState *audio;
961 i2c_slave *wm;
962
963 audio = AUD_init();
964 if (!audio)
965 return;
966 /* Attach a WM8750 to the bus */
967 wm = wm8750_init(bus, audio);
968
969 spitz_wm8750_addr(0, 0, wm);
970 pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_WM, spitz_wm8750_addr, wm);
971 /* .. and to the sound interface. */
972 cpu->i2s->opaque = wm;
973 cpu->i2s->codec_out = wm8750_dac_dat;
974 cpu->i2s->codec_in = wm8750_adc_dat;
975 wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s);
976#endif
977}
978
979static void spitz_akita_i2c_setup(struct pxa2xx_state_s *cpu)
980{
981 /* Attach a Max7310 to Akita I2C bus. */
982 i2c_set_slave_address(max7310_init(pxa2xx_i2c_bus(cpu->i2c[0])),
983 AKITA_MAX_ADDR);
984}
985
b00052e4
AZ		 986/* Other peripherals */
987
988static void spitz_charge_switch(int line, int level, void *opaque)
989{
990 spitz_printf("Charging %s.\n", level ? "off" : "on");
991}
992
993static void spitz_discharge_switch(int line, int level, void *opaque)
994{
995 spitz_printf("Discharging %s.\n", level ? "on" : "off");
996}
997
998static void spitz_greenled_switch(int line, int level, void *opaque)
999{
1000 spitz_printf("Green LED %s.\n", level ? "on" : "off");
1001}
1002
1003static void spitz_orangeled_switch(int line, int level, void *opaque)
1004{
1005 spitz_printf("Orange LED %s.\n", level ? "on" : "off");
1006}
1007
1008#define SPITZ_SCP_LED_GREEN 1
1009#define SPITZ_SCP_JK_B 2
1010#define SPITZ_SCP_CHRG_ON 3
1011#define SPITZ_SCP_MUTE_L 4
1012#define SPITZ_SCP_MUTE_R 5
1013#define SPITZ_SCP_CF_POWER 6
1014#define SPITZ_SCP_LED_ORANGE 7
1015#define SPITZ_SCP_JK_A 8
1016#define SPITZ_SCP_ADC_TEMP_ON 9
1017#define SPITZ_SCP2_IR_ON 1
1018#define SPITZ_SCP2_AKIN_PULLUP 2
1019#define SPITZ_SCP2_BACKLIGHT_CONT 7
1020#define SPITZ_SCP2_BACKLIGHT_ON 8
1021#define SPITZ_SCP2_MIC_BIAS 9
1022
1023static void spitz_scoop_gpio_setup(struct pxa2xx_state_s *cpu,
1024 struct scoop_info_s *scp, int num)
1025{
1026 scoop_gpio_handler_set(&scp[0], SPITZ_SCP_CHRG_ON,
1027 spitz_charge_switch, cpu);
1028 scoop_gpio_handler_set(&scp[0], SPITZ_SCP_JK_B,
1029 spitz_discharge_switch, cpu);
1030 scoop_gpio_handler_set(&scp[0], SPITZ_SCP_LED_GREEN,
1031 spitz_greenled_switch, cpu);
1032 scoop_gpio_handler_set(&scp[0], SPITZ_SCP_LED_ORANGE,
1033 spitz_orangeled_switch, cpu);
1034
1035 if (num >= 2) {
1036 scoop_gpio_handler_set(&scp[1], SPITZ_SCP2_BACKLIGHT_CONT,
1037 spitz_bl_bit5, cpu);
1038 scoop_gpio_handler_set(&scp[1], SPITZ_SCP2_BACKLIGHT_ON,
1039 spitz_bl_power, cpu);
1040 }
1041
1042 scoop_gpio_handler_set(&scp[0], SPITZ_SCP_ADC_TEMP_ON,
1043 spitz_adc_temp_on, cpu);
1044}
1045
1046#define SPITZ_GPIO_HSYNC 22
1047#define SPITZ_GPIO_SD_DETECT 9
1048#define SPITZ_GPIO_SD_WP 81
1049#define SPITZ_GPIO_ON_RESET 89
1050#define SPITZ_GPIO_BAT_COVER 90
1051#define SPITZ_GPIO_CF1_IRQ 105
1052#define SPITZ_GPIO_CF1_CD 94
1053#define SPITZ_GPIO_CF2_IRQ 106
1054#define SPITZ_GPIO_CF2_CD 93
1055
1056int spitz_hsync;
1057
1058static void spitz_lcd_hsync_handler(void *opaque)
1059{
1060 struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
1061 pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_HSYNC, spitz_hsync);
1062 spitz_hsync ^= 1;
1063}
1064
1065static void spitz_mmc_coverswitch_change(void *opaque, int in)
1066{
1067 struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
1068 pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SD_DETECT, in);
1069}
1070
1071static void spitz_mmc_writeprotect_change(void *opaque, int wp)
1072{
1073 struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
1074 pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SD_WP, wp);
1075}
1076
1077static void spitz_pcmcia_cb(void *opaque, int line, int level)
1078{
1079 struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
1080 static const int gpio_map[] = {
1081 SPITZ_GPIO_CF1_IRQ, SPITZ_GPIO_CF1_CD,
1082 SPITZ_GPIO_CF2_IRQ, SPITZ_GPIO_CF2_CD,
1083 };
1084 pxa2xx_gpio_set(cpu->gpio, gpio_map[line], level);
1085}
1086
1087static void spitz_gpio_setup(struct pxa2xx_state_s *cpu, int slots)
1088{
1089 qemu_irq *pcmcia_cb;
1090 /*
1091 * Bad hack: We toggle the LCD hsync GPIO on every GPIO status
1092 * read to satisfy broken guests that poll-wait for hsync.
1093 * Simulating a real hsync event would be less practical and
1094 * wouldn't guarantee that a guest ever exits the loop.
1095 */
1096 spitz_hsync = 0;
1097 pxa2xx_gpio_read_notifier(cpu->gpio, spitz_lcd_hsync_handler, cpu);
1098 pxa2xx_lcd_vsync_cb(cpu->lcd, spitz_lcd_hsync_handler, cpu);
1099
1100 /* MMC/SD host */
1101 pxa2xx_mmci_handlers(cpu->mmc, cpu, spitz_mmc_writeprotect_change,
1102 spitz_mmc_coverswitch_change);
1103
1104 /* Battery lock always closed */
1105 pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_BAT_COVER, 1);
1106
1107 /* Handle reset */
1108 pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_ON_RESET, pxa2xx_reset, cpu);
1109
1110 /* PCMCIA signals: card's IRQ and Card-Detect */
1111 pcmcia_cb = qemu_allocate_irqs(spitz_pcmcia_cb, cpu, slots * 2);
1112 if (slots >= 1)
1113 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0], pcmcia_cb[0], pcmcia_cb[1]);
1114 if (slots >= 2)
1115 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1], pcmcia_cb[2], pcmcia_cb[3]);
1116
1117 /* Initialise the screen rotation related signals */
1118 spitz_gpio_invert[3] = 0; /* Always open */
1119 if (graphic_rotate) { /* Tablet mode */
1120 spitz_gpio_invert[4] = 0;
1121 } else { /* Portrait mode */
1122 spitz_gpio_invert[4] = 1;
1123 }
1124 pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SWA, spitz_gpio_invert[3]);
1125 pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SWB, spitz_gpio_invert[4]);
1126}
1127
1128/* Write the bootloader parameters memory area. */
1129
1130#define MAGIC_CHG(a, b, c, d) ((d << 24) | (c << 16) | (b << 8) | a)
1131
1132struct __attribute__ ((__packed__)) sl_param_info {
1133 uint32_t comadj_keyword;
1134 int32_t comadj;
1135
1136 uint32_t uuid_keyword;
1137 char uuid[16];
1138
1139 uint32_t touch_keyword;
1140 int32_t touch_xp;
1141 int32_t touch_yp;
1142 int32_t touch_xd;
1143 int32_t touch_yd;
1144
1145 uint32_t adadj_keyword;
1146 int32_t adadj;
1147
1148 uint32_t phad_keyword;
1149 int32_t phadadj;
1150} spitz_bootparam = {
1151 .comadj_keyword = MAGIC_CHG('C', 'M', 'A', 'D'),
1152 .comadj = 125,
1153 .uuid_keyword = MAGIC_CHG('U', 'U', 'I', 'D'),
1154 .uuid = { -1 },
1155 .touch_keyword = MAGIC_CHG('T', 'U', 'C', 'H'),
1156 .touch_xp = -1,
1157 .adadj_keyword = MAGIC_CHG('B', 'V', 'A', 'D'),
1158 .adadj = -1,
1159 .phad_keyword = MAGIC_CHG('P', 'H', 'A', 'D'),
1160 .phadadj = 0x01,
1161};
1162
1163static void sl_bootparam_write(uint32_t ptr)
1164{
1165 memcpy(phys_ram_base + ptr, &spitz_bootparam,
1166 sizeof(struct sl_param_info));
1167}
1168
1169#define SL_PXA_PARAM_BASE 0xa0000a00
1170
1171/* Board init. */
1172enum spitz_model_e { spitz, akita, borzoi, terrier };
1173
1174static void spitz_common_init(int ram_size, int vga_ram_size,
1175 DisplayState *ds, const char *kernel_filename,
1176 const char *kernel_cmdline, const char *initrd_filename,
4207117c 1177 const char *cpu_model, enum spitz_model_e model, int arm_id)
b00052e4
AZ		 1178{
1179 uint32_t spitz_ram = 0x04000000;
1180 uint32_t spitz_rom = 0x00800000;
1181 struct pxa2xx_state_s *cpu;
1182 struct scoop_info_s *scp;
1183
4207117c
AZ		 1184 if (!cpu_model)
1185 cpu_model = (model == terrier) ? "pxa270-c5" : "pxa270-c0";
b00052e4 1186
d95b2f8d 1187 /* Setup CPU & memory */
a07dec22 1188 if (ram_size < spitz_ram + spitz_rom + PXA2XX_INTERNAL_SIZE) {
b00052e4 1189 fprintf(stderr, "This platform requires %i bytes of memory\n",
a07dec22 1190 spitz_ram + spitz_rom + PXA2XX_INTERNAL_SIZE);
b00052e4
AZ		 1191 exit(1);
1192 }
d95b2f8d 1193 cpu = pxa270_init(spitz_ram, ds, cpu_model);
b00052e4
AZ		 1194
1195 sl_flash_register(cpu, (model == spitz) ? FLASH_128M : FLASH_1024M);
1196
d95b2f8d
AZ		 1197 cpu_register_physical_memory(0, spitz_rom,
1198 qemu_ram_alloc(spitz_rom) | IO_MEM_ROM);
b00052e4
AZ		 1199
1200 /* Setup peripherals */
1201 spitz_keyboard_register(cpu);
1202
1203 spitz_ssp_attach(cpu);
1204
1205 scp = spitz_scoop_init(cpu, (model == akita) ? 1 : 2);
1206
1207 spitz_scoop_gpio_setup(cpu, scp, (model == akita) ? 1 : 2);
1208
1209 spitz_gpio_setup(cpu, (model == akita) ? 1 : 2);
1210
adb86c37
AZ		 1211 spitz_i2c_setup(cpu);
1212
1213 if (model == akita)
1214 spitz_akita_i2c_setup(cpu);
1215
b00052e4 1216 if (model == terrier)
bf5ee248 1217 /* A 6.0 GB microdrive is permanently sitting in CF slot 1. */
b00052e4
AZ		 1218 spitz_microdrive_attach(cpu);
1219 else if (model != akita)
bf5ee248 1220 /* A 4.0 GB microdrive is permanently sitting in CF slot 1. */
b00052e4
AZ		 1221 spitz_microdrive_attach(cpu);
1222
1223 /* Setup initial (reset) machine state */
d95b2f8d 1224 cpu->env->regs[15] = PXA2XX_SDRAM_BASE;
b00052e4 1225
d95b2f8d
AZ		 1226 arm_load_kernel(cpu->env, spitz_ram, kernel_filename, kernel_cmdline,
1227 initrd_filename, arm_id, PXA2XX_SDRAM_BASE);
1228 sl_bootparam_write(SL_PXA_PARAM_BASE - PXA2XX_SDRAM_BASE);
b00052e4
AZ		 1229}
1230
6ac0e82d
AZ		 1231static void spitz_init(int ram_size, int vga_ram_size,
1232 const char *boot_device, DisplayState *ds,
1233 const char **fd_filename, int snapshot,
b00052e4
AZ		 1234 const char *kernel_filename, const char *kernel_cmdline,
1235 const char *initrd_filename, const char *cpu_model)
1236{
1237 spitz_common_init(ram_size, vga_ram_size, ds, kernel_filename,
4207117c 1238 kernel_cmdline, initrd_filename, cpu_model, spitz, 0x2c9);
b00052e4
AZ		 1239}
1240
6ac0e82d
AZ		 1241static void borzoi_init(int ram_size, int vga_ram_size,
1242 const char *boot_device, DisplayState *ds,
1243 const char **fd_filename, int snapshot,
b00052e4
AZ		 1244 const char *kernel_filename, const char *kernel_cmdline,
1245 const char *initrd_filename, const char *cpu_model)
1246{
1247 spitz_common_init(ram_size, vga_ram_size, ds, kernel_filename,
4207117c 1248 kernel_cmdline, initrd_filename, cpu_model, borzoi, 0x33f);
b00052e4
AZ		 1249}
1250
6ac0e82d
AZ		 1251static void akita_init(int ram_size, int vga_ram_size,
1252 const char *boot_device, DisplayState *ds,
1253 const char **fd_filename, int snapshot,
b00052e4
AZ		 1254 const char *kernel_filename, const char *kernel_cmdline,
1255 const char *initrd_filename, const char *cpu_model)
1256{
1257 spitz_common_init(ram_size, vga_ram_size, ds, kernel_filename,
4207117c 1258 kernel_cmdline, initrd_filename, cpu_model, akita, 0x2e8);
b00052e4
AZ		 1259}
1260
6ac0e82d
AZ		 1261static void terrier_init(int ram_size, int vga_ram_size,
1262 const char *boot_device, DisplayState *ds,
1263 const char **fd_filename, int snapshot,
b00052e4
AZ		 1264 const char *kernel_filename, const char *kernel_cmdline,
1265 const char *initrd_filename, const char *cpu_model)
1266{
1267 spitz_common_init(ram_size, vga_ram_size, ds, kernel_filename,
4207117c 1268 kernel_cmdline, initrd_filename, cpu_model, terrier, 0x33f);
b00052e4
AZ		 1269}
1270
1271QEMUMachine akitapda_machine = {
1272 "akita",
1273 "Akita PDA (PXA270)",
1274 akita_init,
1275};
1276
1277QEMUMachine spitzpda_machine = {
1278 "spitz",
1279 "Spitz PDA (PXA270)",
1280 spitz_init,
1281};
1282
1283QEMUMachine borzoipda_machine = {
1284 "borzoi",
1285 "Borzoi PDA (PXA270)",
1286 borzoi_init,
1287};
1288
1289QEMUMachine terrierpda_machine = {
1290 "terrier",
1291 "Terrier PDA (PXA270)",
1292 terrier_init,
1293};
Empty description
This page took 0.201818 seconds and 4 git commands to generate.