]> Git Repo - qemu.git/blame - hw/ppc405.h
Fix return type.
[qemu.git] / hw / ppc405.h
CommitLineData
04f20795
JM
1/*
2 * QEMU PowerPC 405 shared definitions
3 *
4 * Copyright (c) 2007 Jocelyn Mayer
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
23 */
24
25#if !defined(PPC_405_H)
26#define PPC_405_H
27
28/* Bootinfo as set-up by u-boot */
29typedef struct ppc4xx_bd_info_t ppc4xx_bd_info_t;
30struct ppc4xx_bd_info_t {
31 uint32_t bi_memstart;
32 uint32_t bi_memsize;
33 uint32_t bi_flashstart;
34 uint32_t bi_flashsize;
35 uint32_t bi_flashoffset; /* 0x10 */
36 uint32_t bi_sramstart;
37 uint32_t bi_sramsize;
38 uint32_t bi_bootflags;
39 uint32_t bi_ipaddr; /* 0x20 */
40 uint8_t bi_enetaddr[6];
41 uint16_t bi_ethspeed;
42 uint32_t bi_intfreq;
43 uint32_t bi_busfreq; /* 0x30 */
44 uint32_t bi_baudrate;
45 uint8_t bi_s_version[4];
46 uint8_t bi_r_version[32];
47 uint32_t bi_procfreq;
48 uint32_t bi_plb_busfreq;
49 uint32_t bi_pci_busfreq;
50 uint8_t bi_pci_enetaddr[6];
51 uint32_t bi_pci_enetaddr2[6];
52 uint32_t bi_opbfreq;
53 uint32_t bi_iic_fast[2];
54};
55
56/* PowerPC 405 core */
57CPUState *ppc405_init (const unsigned char *cpu_model,
58 clk_setup_t *cpu_clk, clk_setup_t *tb_clk,
59 uint32_t sysclk);
60ram_addr_t ppc405_set_bootinfo (CPUState *env, ppc4xx_bd_info_t *bd);
61
04f20795
JM
62/* */
63typedef struct ppc4xx_mmio_t ppc4xx_mmio_t;
64int ppc4xx_mmio_register (CPUState *env, ppc4xx_mmio_t *mmio,
9c02f1a2 65 target_phys_addr_t offset, uint32_t len,
04f20795
JM
66 CPUReadMemoryFunc **mem_read,
67 CPUWriteMemoryFunc **mem_write, void *opaque);
9c02f1a2 68ppc4xx_mmio_t *ppc4xx_mmio_init (CPUState *env, target_phys_addr_t base);
04f20795
JM
69/* PowerPC 4xx peripheral local bus arbitrer */
70void ppc4xx_plb_init (CPUState *env);
71/* PLB to OPB bridge */
72void ppc4xx_pob_init (CPUState *env);
73/* OPB arbitrer */
9c02f1a2
JM
74void ppc4xx_opba_init (CPUState *env, ppc4xx_mmio_t *mmio,
75 target_phys_addr_t offset);
04f20795
JM
76/* PowerPC 4xx universal interrupt controller */
77enum {
78 PPCUIC_OUTPUT_INT = 0,
79 PPCUIC_OUTPUT_CINT = 1,
80 PPCUIC_OUTPUT_NB,
81};
82qemu_irq *ppcuic_init (CPUState *env, qemu_irq *irqs,
83 uint32_t dcr_base, int has_ssr, int has_vr);
84/* SDRAM controller */
85void ppc405_sdram_init (CPUState *env, qemu_irq irq, int nbanks,
86 target_ulong *ram_bases, target_ulong *ram_sizes,
87 int do_init);
88/* Peripheral controller */
89void ppc405_ebc_init (CPUState *env);
90/* DMA controller */
91void ppc405_dma_init (CPUState *env, qemu_irq irqs[4]);
92/* GPIO */
9c02f1a2
JM
93void ppc405_gpio_init (CPUState *env, ppc4xx_mmio_t *mmio,
94 target_phys_addr_t offset);
04f20795
JM
95/* Serial ports */
96void ppc405_serial_init (CPUState *env, ppc4xx_mmio_t *mmio,
9c02f1a2 97 target_phys_addr_t offset, qemu_irq irq,
04f20795
JM
98 CharDriverState *chr);
99/* On Chip Memory */
100void ppc405_ocm_init (CPUState *env, unsigned long offset);
101/* I2C controller */
9c02f1a2
JM
102void ppc405_i2c_init (CPUState *env, ppc4xx_mmio_t *mmio,
103 target_phys_addr_t offset, qemu_irq irq);
104/* General purpose timers */
105void ppc4xx_gpt_init (CPUState *env, ppc4xx_mmio_t *mmio,
106 target_phys_addr_t offset, qemu_irq irq[5]);
107/* Memory access layer */
108void ppc405_mal_init (CPUState *env, qemu_irq irqs[4]);
04f20795
JM
109/* PowerPC 405 microcontrollers */
110CPUState *ppc405cr_init (target_ulong ram_bases[4], target_ulong ram_sizes[4],
111 uint32_t sysclk, qemu_irq **picp,
112 ram_addr_t *offsetp, int do_init);
113CPUState *ppc405ep_init (target_ulong ram_bases[2], target_ulong ram_sizes[2],
114 uint32_t sysclk, qemu_irq **picp,
115 ram_addr_t *offsetp, int do_init);
116/* IBM STBxxx microcontrollers */
117CPUState *ppc_stb025_init (target_ulong ram_bases[2],
118 target_ulong ram_sizes[2],
119 uint32_t sysclk, qemu_irq **picp,
120 ram_addr_t *offsetp);
121
122#endif /* !defined(PPC_405_H) */
This page took 0.066133 seconds and 4 git commands to generate.