[qemu.git] / hw / pflash_cfi02.c

/*
 *  CFI parallel flash with AMD command set emulation
 *
 *  Copyright (c) 2005 Jocelyn Mayer
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
 */

/*
 * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
 * Supported commands/modes are:
 * - flash read
 * - flash write
 * - flash ID read
 * - sector erase
 * - chip erase
 * - unlock bypass command
 * - CFI queries
 *
 * It does not support flash interleaving.
 * It does not implement boot blocs with reduced size
 * It does not implement software data protection as found in many real chips
 * It does not implement erase suspend/resume commands
 * It does not implement multiple sectors erase
 */

#include "hw.h"
#include "flash.h"
#include "qemu-timer.h"
#include "block.h"

//#define PFLASH_DEBUG
#ifdef PFLASH_DEBUG
#define DPRINTF(fmt, ...)                          \
do {                                               \
    printf("PFLASH: " fmt , ## __VA_ARGS__);       \
} while (0)
#else
#define DPRINTF(fmt, ...) do { } while (0)
#endif

struct pflash_t {
    BlockDriverState *bs;
    target_phys_addr_t base;
    uint32_t sector_len;
    uint32_t chip_len;
    int mappings;
    int width;
    int wcycle; /* if 0, the flash is read normally */
    int bypass;
    int ro;
    uint8_t cmd;
    uint8_t status;
    uint16_t ident[4];
    uint16_t unlock_addr[2];
    uint8_t cfi_len;
    uint8_t cfi_table[0x52];
    QEMUTimer *timer;
    ram_addr_t off;
    int fl_mem;
    int rom_mode;
    void *storage;
};

static void pflash_register_memory(pflash_t *pfl, int rom_mode)
{
    unsigned long phys_offset = pfl->fl_mem;
    int i;

    if (rom_mode)
        phys_offset |= pfl->off | IO_MEM_ROMD;
    pfl->rom_mode = rom_mode;

    for (i = 0; i < pfl->mappings; i++)
        cpu_register_physical_memory(pfl->base + i * pfl->chip_len,
                                     pfl->chip_len, phys_offset);
}

static void pflash_timer (void *opaque)
{
    pflash_t *pfl = opaque;

    DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
    /* Reset flash */
    pfl->status ^= 0x80;
    if (pfl->bypass) {
        pfl->wcycle = 2;
    } else {
        pflash_register_memory(pfl, 1);
        pfl->wcycle = 0;
    }
    pfl->cmd = 0;
}

static uint32_t pflash_read (pflash_t *pfl, target_phys_addr_t offset,
                             int width, int be)
{
    target_phys_addr_t boff;
    uint32_t ret;
    uint8_t *p;

    DPRINTF("%s: offset " TARGET_FMT_plx "\n", __func__, offset);
    ret = -1;
    if (pfl->rom_mode) {
        /* Lazy reset of to ROMD mode */
        if (pfl->wcycle == 0)
            pflash_register_memory(pfl, 1);
    }
    offset &= pfl->chip_len - 1;
    boff = offset & 0xFF;
    if (pfl->width == 2)
        boff = boff >> 1;
    else if (pfl->width == 4)
        boff = boff >> 2;
    switch (pfl->cmd) {
    default:
        /* This should never happen : reset state & treat it as a read*/
        DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
        pfl->wcycle = 0;
        pfl->cmd = 0;
    case 0x80:
        /* We accept reads during second unlock sequence... */
    case 0x00:
    flash_read:
        /* Flash area read */
        p = pfl->storage;
        switch (width) {
        case 1:
            ret = p[offset];
//            DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
            break;
        case 2:
            if (be) {
                ret = p[offset] << 8;
                ret |= p[offset + 1];
            } else {
                ret = p[offset];
                ret |= p[offset + 1] << 8;
            }
//            DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
            break;
        case 4:
            if (be) {
                ret = p[offset] << 24;
                ret |= p[offset + 1] << 16;
                ret |= p[offset + 2] << 8;
                ret |= p[offset + 3];
            } else {
                ret = p[offset];
                ret |= p[offset + 1] << 8;
                ret |= p[offset + 2] << 16;
                ret |= p[offset + 3] << 24;
            }
//            DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
            break;
        }
        break;
    case 0x90:
        /* flash ID read */
        switch (boff) {
        case 0x00:
        case 0x01:
            ret = pfl->ident[boff & 0x01];
            break;
        case 0x02:
            ret = 0x00; /* Pretend all sectors are unprotected */
            break;
        case 0x0E:
        case 0x0F:
            if (pfl->ident[2 + (boff & 0x01)] == (uint8_t)-1)
                goto flash_read;
            ret = pfl->ident[2 + (boff & 0x01)];
            break;
        default:
            goto flash_read;
        }
        DPRINTF("%s: ID " TARGET_FMT_pld " %x\n", __func__, boff, ret);
        break;
    case 0xA0:
    case 0x10:
    case 0x30:
        /* Status register read */
        ret = pfl->status;
        DPRINTF("%s: status %x\n", __func__, ret);
        /* Toggle bit 6 */
        pfl->status ^= 0x40;
        break;
    case 0x98:
        /* CFI query mode */
        if (boff > pfl->cfi_len)
            ret = 0;
        else
            ret = pfl->cfi_table[boff];
        break;
    }

    return ret;
}

/* update flash content on disk */
static void pflash_update(pflash_t *pfl, int offset,
                          int size)
{
    int offset_end;
    if (pfl->bs) {
        offset_end = offset + size;
        /* round to sectors */
        offset = offset >> 9;
        offset_end = (offset_end + 511) >> 9;
        bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
                   offset_end - offset);
    }
}

static void pflash_write (pflash_t *pfl, target_phys_addr_t offset,
                          uint32_t value, int width, int be)
{
    target_phys_addr_t boff;
    uint8_t *p;
    uint8_t cmd;

    cmd = value;
    if (pfl->cmd != 0xA0 && cmd == 0xF0) {
#if 0
        DPRINTF("%s: flash reset asked (%02x %02x)\n",
                __func__, pfl->cmd, cmd);
#endif
        goto reset_flash;
    }
    DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d %d\n", __func__,
            offset, value, width, pfl->wcycle);
    offset &= pfl->chip_len - 1;

    DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d\n", __func__,
            offset, value, width);
    boff = offset & (pfl->sector_len - 1);
    if (pfl->width == 2)
        boff = boff >> 1;
    else if (pfl->width == 4)
        boff = boff >> 2;
    switch (pfl->wcycle) {
    case 0:
        /* Set the device in I/O access mode if required */
        if (pfl->rom_mode)
            pflash_register_memory(pfl, 0);
        /* We're in read mode */
    check_unlock0:
        if (boff == 0x55 && cmd == 0x98) {
        enter_CFI_mode:
            /* Enter CFI query mode */
            pfl->wcycle = 7;
            pfl->cmd = 0x98;
            return;
        }
        if (boff != pfl->unlock_addr[0] || cmd != 0xAA) {
            DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n",
                    __func__, boff, cmd, pfl->unlock_addr[0]);
            goto reset_flash;
        }
        DPRINTF("%s: unlock sequence started\n", __func__);
        break;
    case 1:
        /* We started an unlock sequence */
    check_unlock1:
        if (boff != pfl->unlock_addr[1] || cmd != 0x55) {
            DPRINTF("%s: unlock1 failed " TARGET_FMT_plx " %02x\n", __func__,
                    boff, cmd);
            goto reset_flash;
        }
        DPRINTF("%s: unlock sequence done\n", __func__);
        break;
    case 2:
        /* We finished an unlock sequence */
        if (!pfl->bypass && boff != pfl->unlock_addr[0]) {
            DPRINTF("%s: command failed " TARGET_FMT_plx " %02x\n", __func__,
                    boff, cmd);
            goto reset_flash;
        }
        switch (cmd) {
        case 0x20:
            pfl->bypass = 1;
            goto do_bypass;
        case 0x80:
        case 0x90:
        case 0xA0:
            pfl->cmd = cmd;
            DPRINTF("%s: starting command %02x\n", __func__, cmd);
            break;
        default:
            DPRINTF("%s: unknown command %02x\n", __func__, cmd);
            goto reset_flash;
        }
        break;
    case 3:
        switch (pfl->cmd) {
        case 0x80:
            /* We need another unlock sequence */
            goto check_unlock0;
        case 0xA0:
            DPRINTF("%s: write data offset " TARGET_FMT_plx " %08x %d\n",
                    __func__, offset, value, width);
            p = pfl->storage;
            switch (width) {
            case 1:
                p[offset] &= value;
                pflash_update(pfl, offset, 1);
                break;
            case 2:
                if (be) {
                    p[offset] &= value >> 8;
                    p[offset + 1] &= value;
                } else {
                    p[offset] &= value;
                    p[offset + 1] &= value >> 8;
                }
                pflash_update(pfl, offset, 2);
                break;
            case 4:
                if (be) {
                    p[offset] &= value >> 24;
                    p[offset + 1] &= value >> 16;
                    p[offset + 2] &= value >> 8;
                    p[offset + 3] &= value;
                } else {
                    p[offset] &= value;
                    p[offset + 1] &= value >> 8;
                    p[offset + 2] &= value >> 16;
                    p[offset + 3] &= value >> 24;
                }
                pflash_update(pfl, offset, 4);
                break;
            }
            pfl->status = 0x00 | ~(value & 0x80);
            /* Let's pretend write is immediate */
            if (pfl->bypass)
                goto do_bypass;
            goto reset_flash;
        case 0x90:
            if (pfl->bypass && cmd == 0x00) {
                /* Unlock bypass reset */
                goto reset_flash;
            }
            /* We can enter CFI query mode from autoselect mode */
            if (boff == 0x55 && cmd == 0x98)
                goto enter_CFI_mode;
            /* No break here */
        default:
            DPRINTF("%s: invalid write for command %02x\n",
                    __func__, pfl->cmd);
            goto reset_flash;
        }
    case 4:
        switch (pfl->cmd) {
        case 0xA0:
            /* Ignore writes while flash data write is occuring */
            /* As we suppose write is immediate, this should never happen */
            return;
        case 0x80:
            goto check_unlock1;
        default:
            /* Should never happen */
            DPRINTF("%s: invalid command state %02x (wc 4)\n",
                    __func__, pfl->cmd);
            goto reset_flash;
        }
        break;
    case 5:
        switch (cmd) {
        case 0x10:
            if (boff != pfl->unlock_addr[0]) {
                DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n",
                        __func__, offset);
                goto reset_flash;
            }
            /* Chip erase */
            DPRINTF("%s: start chip erase\n", __func__);
            memset(pfl->storage, 0xFF, pfl->chip_len);
            pfl->status = 0x00;
            pflash_update(pfl, 0, pfl->chip_len);
            /* Let's wait 5 seconds before chip erase is done */
            qemu_mod_timer(pfl->timer,
                           qemu_get_clock(vm_clock) + (get_ticks_per_sec() * 5));
            break;
        case 0x30:
            /* Sector erase */
            p = pfl->storage;
            offset &= ~(pfl->sector_len - 1);
            DPRINTF("%s: start sector erase at " TARGET_FMT_plx "\n", __func__,
                    offset);
            memset(p + offset, 0xFF, pfl->sector_len);
            pflash_update(pfl, offset, pfl->sector_len);
            pfl->status = 0x00;
            /* Let's wait 1/2 second before sector erase is done */
            qemu_mod_timer(pfl->timer,
                           qemu_get_clock(vm_clock) + (get_ticks_per_sec() / 2));
            break;
        default:
            DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
            goto reset_flash;
        }
        pfl->cmd = cmd;
        break;
    case 6:
        switch (pfl->cmd) {
        case 0x10:
            /* Ignore writes during chip erase */
            return;
        case 0x30:
            /* Ignore writes during sector erase */
            return;
        default:
            /* Should never happen */
            DPRINTF("%s: invalid command state %02x (wc 6)\n",
                    __func__, pfl->cmd);
            goto reset_flash;
        }
        break;
    case 7: /* Special value for CFI queries */
        DPRINTF("%s: invalid write in CFI query mode\n", __func__);
        goto reset_flash;
    default:
        /* Should never happen */
        DPRINTF("%s: invalid write state (wc 7)\n",  __func__);
        goto reset_flash;
    }
    pfl->wcycle++;

    return;

    /* Reset flash */
 reset_flash:
    pfl->bypass = 0;
    pfl->wcycle = 0;
    pfl->cmd = 0;
    return;

 do_bypass:
    pfl->wcycle = 2;
    pfl->cmd = 0;
    return;
}


static uint32_t pflash_readb_be(void *opaque, target_phys_addr_t addr)
{
    return pflash_read(opaque, addr, 1, 1);
}

static uint32_t pflash_readb_le(void *opaque, target_phys_addr_t addr)
{
    return pflash_read(opaque, addr, 1, 0);
}

static uint32_t pflash_readw_be(void *opaque, target_phys_addr_t addr)
{
    pflash_t *pfl = opaque;

    return pflash_read(pfl, addr, 2, 1);
}

static uint32_t pflash_readw_le(void *opaque, target_phys_addr_t addr)
{
    pflash_t *pfl = opaque;

    return pflash_read(pfl, addr, 2, 0);
}

static uint32_t pflash_readl_be(void *opaque, target_phys_addr_t addr)
{
    pflash_t *pfl = opaque;

    return pflash_read(pfl, addr, 4, 1);
}

static uint32_t pflash_readl_le(void *opaque, target_phys_addr_t addr)
{
    pflash_t *pfl = opaque;

    return pflash_read(pfl, addr, 4, 0);
}

static void pflash_writeb_be(void *opaque, target_phys_addr_t addr,
                             uint32_t value)
{
    pflash_write(opaque, addr, value, 1, 1);
}

static void pflash_writeb_le(void *opaque, target_phys_addr_t addr,
                             uint32_t value)
{
    pflash_write(opaque, addr, value, 1, 0);
}

static void pflash_writew_be(void *opaque, target_phys_addr_t addr,
                             uint32_t value)
{
    pflash_t *pfl = opaque;

    pflash_write(pfl, addr, value, 2, 1);
}

static void pflash_writew_le(void *opaque, target_phys_addr_t addr,
                             uint32_t value)
{
    pflash_t *pfl = opaque;

    pflash_write(pfl, addr, value, 2, 0);
}

static void pflash_writel_be(void *opaque, target_phys_addr_t addr,
                             uint32_t value)
{
    pflash_t *pfl = opaque;

    pflash_write(pfl, addr, value, 4, 1);
}

static void pflash_writel_le(void *opaque, target_phys_addr_t addr,
                             uint32_t value)
{
    pflash_t *pfl = opaque;

    pflash_write(pfl, addr, value, 4, 0);
}

static CPUWriteMemoryFunc * const pflash_write_ops_be[] = {
    &pflash_writeb_be,
    &pflash_writew_be,
    &pflash_writel_be,
};

static CPUReadMemoryFunc * const pflash_read_ops_be[] = {
    &pflash_readb_be,
    &pflash_readw_be,
    &pflash_readl_be,
};

static CPUWriteMemoryFunc * const pflash_write_ops_le[] = {
    &pflash_writeb_le,
    &pflash_writew_le,
    &pflash_writel_le,
};

static CPUReadMemoryFunc * const pflash_read_ops_le[] = {
    &pflash_readb_le,
    &pflash_readw_le,
    &pflash_readl_le,
};

/* Count trailing zeroes of a 32 bits quantity */
static int ctz32 (uint32_t n)
{
    int ret;

    ret = 0;
    if (!(n & 0xFFFF)) {
        ret += 16;
        n = n >> 16;
    }
    if (!(n & 0xFF)) {
        ret += 8;
        n = n >> 8;
    }
    if (!(n & 0xF)) {
        ret += 4;
        n = n >> 4;
    }
    if (!(n & 0x3)) {
        ret += 2;
        n = n >> 2;
    }
    if (!(n & 0x1)) {
        ret++;
#if 0 /* This is not necessary as n is never 0 */
        n = n >> 1;
#endif
    }
#if 0 /* This is not necessary as n is never 0 */
    if (!n)
        ret++;
#endif

    return ret;
}

pflash_t *pflash_cfi02_register(target_phys_addr_t base, ram_addr_t off,
                                BlockDriverState *bs, uint32_t sector_len,
                                int nb_blocs, int nb_mappings, int width,
                                uint16_t id0, uint16_t id1,
                                uint16_t id2, uint16_t id3,
                                uint16_t unlock_addr0, uint16_t unlock_addr1,
                                int be)
{
    pflash_t *pfl;
    int32_t chip_len;
    int ret;

    chip_len = sector_len * nb_blocs;
    /* XXX: to be fixed */
#if 0
    if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
        total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
        return NULL;
#endif
    pfl = qemu_mallocz(sizeof(pflash_t));
    /* FIXME: Allocate ram ourselves.  */
    pfl->storage = qemu_get_ram_ptr(off);
    if (be) {
        pfl->fl_mem = cpu_register_io_memory(pflash_read_ops_be,
                                             pflash_write_ops_be,
                                             pfl);
    } else {
        pfl->fl_mem = cpu_register_io_memory(pflash_read_ops_le,
                                             pflash_write_ops_le,
                                             pfl);
    }
    pfl->off = off;
    pfl->base = base;
    pfl->chip_len = chip_len;
    pfl->mappings = nb_mappings;
    pflash_register_memory(pfl, 1);
    pfl->bs = bs;
    if (pfl->bs) {
        /* read the initial flash content */
        ret = bdrv_read(pfl->bs, 0, pfl->storage, chip_len >> 9);
        if (ret < 0) {
            cpu_unregister_io_memory(pfl->fl_mem);
            qemu_free(pfl);
            return NULL;
        }
    }
#if 0 /* XXX: there should be a bit to set up read-only,
       *      the same way the hardware does (with WP pin).
       */
    pfl->ro = 1;
#else
    pfl->ro = 0;
#endif
    pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
    pfl->sector_len = sector_len;
    pfl->width = width;
    pfl->wcycle = 0;
    pfl->cmd = 0;
    pfl->status = 0;
    pfl->ident[0] = id0;
    pfl->ident[1] = id1;
    pfl->ident[2] = id2;
    pfl->ident[3] = id3;
    pfl->unlock_addr[0] = unlock_addr0;
    pfl->unlock_addr[1] = unlock_addr1;
    /* Hardcoded CFI table (mostly from SG29 Spansion flash) */
    pfl->cfi_len = 0x52;
    /* Standard "QRY" string */
    pfl->cfi_table[0x10] = 'Q';
    pfl->cfi_table[0x11] = 'R';
    pfl->cfi_table[0x12] = 'Y';
    /* Command set (AMD/Fujitsu) */
    pfl->cfi_table[0x13] = 0x02;
    pfl->cfi_table[0x14] = 0x00;
    /* Primary extended table address */
    pfl->cfi_table[0x15] = 0x31;
    pfl->cfi_table[0x16] = 0x00;
    /* Alternate command set (none) */
    pfl->cfi_table[0x17] = 0x00;
    pfl->cfi_table[0x18] = 0x00;
    /* Alternate extended table (none) */
    pfl->cfi_table[0x19] = 0x00;
    pfl->cfi_table[0x1A] = 0x00;
    /* Vcc min */
    pfl->cfi_table[0x1B] = 0x27;
    /* Vcc max */
    pfl->cfi_table[0x1C] = 0x36;
    /* Vpp min (no Vpp pin) */
    pfl->cfi_table[0x1D] = 0x00;
    /* Vpp max (no Vpp pin) */
    pfl->cfi_table[0x1E] = 0x00;
    /* Reserved */
    pfl->cfi_table[0x1F] = 0x07;
    /* Timeout for min size buffer write (NA) */
    pfl->cfi_table[0x20] = 0x00;
    /* Typical timeout for block erase (512 ms) */
    pfl->cfi_table[0x21] = 0x09;
    /* Typical timeout for full chip erase (4096 ms) */
    pfl->cfi_table[0x22] = 0x0C;
    /* Reserved */
    pfl->cfi_table[0x23] = 0x01;
    /* Max timeout for buffer write (NA) */
    pfl->cfi_table[0x24] = 0x00;
    /* Max timeout for block erase */
    pfl->cfi_table[0x25] = 0x0A;
    /* Max timeout for chip erase */
    pfl->cfi_table[0x26] = 0x0D;
    /* Device size */
    pfl->cfi_table[0x27] = ctz32(chip_len);
    /* Flash device interface (8 & 16 bits) */
    pfl->cfi_table[0x28] = 0x02;
    pfl->cfi_table[0x29] = 0x00;
    /* Max number of bytes in multi-bytes write */
    /* XXX: disable buffered write as it's not supported */
    //    pfl->cfi_table[0x2A] = 0x05;
    pfl->cfi_table[0x2A] = 0x00;
    pfl->cfi_table[0x2B] = 0x00;
    /* Number of erase block regions (uniform) */
    pfl->cfi_table[0x2C] = 0x01;
    /* Erase block region 1 */
    pfl->cfi_table[0x2D] = nb_blocs - 1;
    pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
    pfl->cfi_table[0x2F] = sector_len >> 8;
    pfl->cfi_table[0x30] = sector_len >> 16;

    /* Extended */
    pfl->cfi_table[0x31] = 'P';
    pfl->cfi_table[0x32] = 'R';
    pfl->cfi_table[0x33] = 'I';

    pfl->cfi_table[0x34] = '1';
    pfl->cfi_table[0x35] = '0';

    pfl->cfi_table[0x36] = 0x00;
    pfl->cfi_table[0x37] = 0x00;
    pfl->cfi_table[0x38] = 0x00;
    pfl->cfi_table[0x39] = 0x00;

    pfl->cfi_table[0x3a] = 0x00;

    pfl->cfi_table[0x3b] = 0x00;
    pfl->cfi_table[0x3c] = 0x00;

    return pfl;
}
Commit	Line	Data
29133e9a FB	1	/*
29133e9a FB	2	* CFI parallel flash with AMD command set emulation
5fafdf24	3	*
29133e9a FB	4	* Copyright (c) 2005 Jocelyn Mayer
	5	*
	6	* This library is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU Lesser General Public
	8	* License as published by the Free Software Foundation; either
	9	* version 2 of the License, or (at your option) any later version.
	10	*
	11	* This library is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	14	* Lesser General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU Lesser General Public
8167ee88	17	* License along with this library; if not, see <http://www.gnu.org/licenses/>.
29133e9a FB	18	*/
	19
	20	/*
	21	* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
	22	* Supported commands/modes are:
	23	* - flash read
	24	* - flash write
	25	* - flash ID read
	26	* - sector erase
	27	* - chip erase
	28	* - unlock bypass command
	29	* - CFI queries
	30	*
	31	* It does not support flash interleaving.
	32	* It does not implement boot blocs with reduced size
	33	* It does not implement software data protection as found in many real chips
	34	* It does not implement erase suspend/resume commands
	35	* It does not implement multiple sectors erase
	36	*/
	37
87ecb68b PB	38	#include "hw.h"
	39	#include "flash.h"
	40	#include "qemu-timer.h"
	41	#include "block.h"
29133e9a FB	42
	43	//#define PFLASH_DEBUG
	44	#ifdef PFLASH_DEBUG
001faf32	45	#define DPRINTF(fmt, ...) \
29133e9a	46	do { \
001faf32	47	printf("PFLASH: " fmt , ## __VA_ARGS__); \
29133e9a FB	48	} while (0)
29133e9a FB	49	#else
001faf32	50	#define DPRINTF(fmt, ...) do { } while (0)
29133e9a FB	51	#endif
29133e9a FB	52
c227f099	53	struct pflash_t {
29133e9a	54	BlockDriverState *bs;
c227f099	55	target_phys_addr_t base;
71db710f	56	uint32_t sector_len;
4fbd24ba AZ	57	uint32_t chip_len;
4fbd24ba AZ	58	int mappings;
29133e9a FB	59	int width;
	60	int wcycle; /* if 0, the flash is read normally */
	61	int bypass;
	62	int ro;
	63	uint8_t cmd;
	64	uint8_t status;
	65	uint16_t ident[4];
6725070d	66	uint16_t unlock_addr[2];
29133e9a FB	67	uint8_t cfi_len;
	68	uint8_t cfi_table[0x52];
	69	QEMUTimer *timer;
c227f099	70	ram_addr_t off;
29133e9a	71	int fl_mem;
9c9bb6c8	72	int rom_mode;
29133e9a FB	73	void *storage;
	74	};
	75
c227f099	76	static void pflash_register_memory(pflash_t *pfl, int rom_mode)
4fbd24ba AZ	77	{
	78	unsigned long phys_offset = pfl->fl_mem;
	79	int i;
	80
	81	if (rom_mode)
	82	phys_offset \|= pfl->off \| IO_MEM_ROMD;
9c9bb6c8	83	pfl->rom_mode = rom_mode;
4fbd24ba AZ	84
	85	for (i = 0; i < pfl->mappings; i++)
	86	cpu_register_physical_memory(pfl->base + i * pfl->chip_len,
	87	pfl->chip_len, phys_offset);
	88	}
	89
29133e9a FB	90	static void pflash_timer (void *opaque)
29133e9a FB	91	{
c227f099	92	pflash_t *pfl = opaque;
29133e9a FB	93
	94	DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
	95	/* Reset flash */
	96	pfl->status ^= 0x80;
	97	if (pfl->bypass) {
	98	pfl->wcycle = 2;
	99	} else {
4fbd24ba	100	pflash_register_memory(pfl, 1);
29133e9a FB	101	pfl->wcycle = 0;
	102	}
	103	pfl->cmd = 0;
	104	}
	105
5f9fc5ad BS	106	static uint32_t pflash_read (pflash_t *pfl, target_phys_addr_t offset,
5f9fc5ad BS	107	int width, int be)
29133e9a	108	{
f8be67ee	109	target_phys_addr_t boff;
29133e9a FB	110	uint32_t ret;
	111	uint8_t *p;
	112
f8be67ee	113	DPRINTF("%s: offset " TARGET_FMT_plx "\n", __func__, offset);
29133e9a	114	ret = -1;
9c9bb6c8	115	if (pfl->rom_mode) {
9c9bb6c8 AZ	116	/* Lazy reset of to ROMD mode */
	117	if (pfl->wcycle == 0)
	118	pflash_register_memory(pfl, 1);
0f459d16	119	}
4fbd24ba	120	offset &= pfl->chip_len - 1;
29133e9a FB	121	boff = offset & 0xFF;
	122	if (pfl->width == 2)
	123	boff = boff >> 1;
	124	else if (pfl->width == 4)
	125	boff = boff >> 2;
	126	switch (pfl->cmd) {
	127	default:
	128	/* This should never happen : reset state & treat it as a read*/
	129	DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
	130	pfl->wcycle = 0;
	131	pfl->cmd = 0;
	132	case 0x80:
	133	/* We accept reads during second unlock sequence... */
	134	case 0x00:
	135	flash_read:
	136	/* Flash area read */
	137	p = pfl->storage;
	138	switch (width) {
	139	case 1:
	140	ret = p[offset];
	141	// DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
	142	break;
	143	case 2:
5f9fc5ad BS	144	if (be) {
	145	ret = p[offset] << 8;
	146	ret \|= p[offset + 1];
	147	} else {
	148	ret = p[offset];
	149	ret \|= p[offset + 1] << 8;
	150	}
29133e9a FB	151	// DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
	152	break;
	153	case 4:
5f9fc5ad BS	154	if (be) {
	155	ret = p[offset] << 24;
	156	ret \|= p[offset + 1] << 16;
	157	ret \|= p[offset + 2] << 8;
	158	ret \|= p[offset + 3];
	159	} else {
	160	ret = p[offset];
	161	ret \|= p[offset + 1] << 8;
	162	ret \|= p[offset + 2] << 16;
	163	ret \|= p[offset + 3] << 24;
	164	}
29133e9a FB	165	// DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
	166	break;
	167	}
	168	break;
	169	case 0x90:
	170	/* flash ID read */
	171	switch (boff) {
	172	case 0x00:
	173	case 0x01:
	174	ret = pfl->ident[boff & 0x01];
	175	break;
	176	case 0x02:
	177	ret = 0x00; /* Pretend all sectors are unprotected */
	178	break;
	179	case 0x0E:
	180	case 0x0F:
	181	if (pfl->ident[2 + (boff & 0x01)] == (uint8_t)-1)
	182	goto flash_read;
	183	ret = pfl->ident[2 + (boff & 0x01)];
	184	break;
	185	default:
	186	goto flash_read;
	187	}
f8be67ee	188	DPRINTF("%s: ID " TARGET_FMT_pld " %x\n", __func__, boff, ret);
29133e9a FB	189	break;
	190	case 0xA0:
	191	case 0x10:
	192	case 0x30:
	193	/* Status register read */
	194	ret = pfl->status;
	195	DPRINTF("%s: status %x\n", __func__, ret);
	196	/* Toggle bit 6 */
	197	pfl->status ^= 0x40;
	198	break;
	199	case 0x98:
	200	/* CFI query mode */
	201	if (boff > pfl->cfi_len)
	202	ret = 0;
	203	else
	204	ret = pfl->cfi_table[boff];
	205	break;
	206	}
	207
	208	return ret;
	209	}
	210
	211	/* update flash content on disk */
c227f099	212	static void pflash_update(pflash_t *pfl, int offset,
29133e9a FB	213	int size)
	214	{
	215	int offset_end;
	216	if (pfl->bs) {
	217	offset_end = offset + size;
	218	/* round to sectors */
	219	offset = offset >> 9;
	220	offset_end = (offset_end + 511) >> 9;
5fafdf24	221	bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
29133e9a FB	222	offset_end - offset);
	223	}
	224	}
	225
f8be67ee	226	static void pflash_write (pflash_t *pfl, target_phys_addr_t offset,
5f9fc5ad	227	uint32_t value, int width, int be)
29133e9a	228	{
f8be67ee	229	target_phys_addr_t boff;
29133e9a FB	230	uint8_t *p;
	231	uint8_t cmd;
	232
95d1f3ed JM	233	cmd = value;
	234	if (pfl->cmd != 0xA0 && cmd == 0xF0) {
	235	#if 0
	236	DPRINTF("%s: flash reset asked (%02x %02x)\n",
	237	__func__, pfl->cmd, cmd);
	238	#endif
	239	goto reset_flash;
	240	}
f8be67ee	241	DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d %d\n", __func__,
95d1f3ed	242	offset, value, width, pfl->wcycle);
4fbd24ba	243	offset &= pfl->chip_len - 1;
3b46e624	244
f8be67ee	245	DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d\n", __func__,
e96efcfc	246	offset, value, width);
29133e9a FB	247	boff = offset & (pfl->sector_len - 1);
	248	if (pfl->width == 2)
	249	boff = boff >> 1;
	250	else if (pfl->width == 4)
	251	boff = boff >> 2;
	252	switch (pfl->wcycle) {
	253	case 0:
9c9bb6c8 AZ	254	/* Set the device in I/O access mode if required */
	255	if (pfl->rom_mode)
	256	pflash_register_memory(pfl, 0);
29133e9a FB	257	/* We're in read mode */
	258	check_unlock0:
	259	if (boff == 0x55 && cmd == 0x98) {
	260	enter_CFI_mode:
	261	/* Enter CFI query mode */
	262	pfl->wcycle = 7;
	263	pfl->cmd = 0x98;
	264	return;
	265	}
6725070d	266	if (boff != pfl->unlock_addr[0] \|\| cmd != 0xAA) {
f8be67ee	267	DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n",
6725070d	268	__func__, boff, cmd, pfl->unlock_addr[0]);
29133e9a FB	269	goto reset_flash;
	270	}
	271	DPRINTF("%s: unlock sequence started\n", __func__);
	272	break;
	273	case 1:
	274	/* We started an unlock sequence */
	275	check_unlock1:
6725070d	276	if (boff != pfl->unlock_addr[1] \|\| cmd != 0x55) {
f8be67ee	277	DPRINTF("%s: unlock1 failed " TARGET_FMT_plx " %02x\n", __func__,
e96efcfc	278	boff, cmd);
29133e9a FB	279	goto reset_flash;
	280	}
	281	DPRINTF("%s: unlock sequence done\n", __func__);
	282	break;
	283	case 2:
	284	/* We finished an unlock sequence */
6725070d	285	if (!pfl->bypass && boff != pfl->unlock_addr[0]) {
f8be67ee	286	DPRINTF("%s: command failed " TARGET_FMT_plx " %02x\n", __func__,
e96efcfc	287	boff, cmd);
29133e9a FB	288	goto reset_flash;
	289	}
	290	switch (cmd) {
	291	case 0x20:
	292	pfl->bypass = 1;
	293	goto do_bypass;
	294	case 0x80:
	295	case 0x90:
	296	case 0xA0:
	297	pfl->cmd = cmd;
	298	DPRINTF("%s: starting command %02x\n", __func__, cmd);
	299	break;
	300	default:
	301	DPRINTF("%s: unknown command %02x\n", __func__, cmd);
	302	goto reset_flash;
	303	}
	304	break;
	305	case 3:
	306	switch (pfl->cmd) {
	307	case 0x80:
	308	/* We need another unlock sequence */
	309	goto check_unlock0;
	310	case 0xA0:
f8be67ee	311	DPRINTF("%s: write data offset " TARGET_FMT_plx " %08x %d\n",
29133e9a FB	312	__func__, offset, value, width);
	313	p = pfl->storage;
	314	switch (width) {
	315	case 1:
	316	p[offset] &= value;
	317	pflash_update(pfl, offset, 1);
	318	break;
	319	case 2:
5f9fc5ad BS	320	if (be) {
	321	p[offset] &= value >> 8;
	322	p[offset + 1] &= value;
	323	} else {
	324	p[offset] &= value;
	325	p[offset + 1] &= value >> 8;
	326	}
29133e9a FB	327	pflash_update(pfl, offset, 2);
	328	break;
	329	case 4:
5f9fc5ad BS	330	if (be) {
	331	p[offset] &= value >> 24;
	332	p[offset + 1] &= value >> 16;
	333	p[offset + 2] &= value >> 8;
	334	p[offset + 3] &= value;
	335	} else {
	336	p[offset] &= value;
	337	p[offset + 1] &= value >> 8;
	338	p[offset + 2] &= value >> 16;
	339	p[offset + 3] &= value >> 24;
	340	}
29133e9a FB	341	pflash_update(pfl, offset, 4);
	342	break;
	343	}
	344	pfl->status = 0x00 \| ~(value & 0x80);
	345	/* Let's pretend write is immediate */
	346	if (pfl->bypass)
	347	goto do_bypass;
	348	goto reset_flash;
	349	case 0x90:
	350	if (pfl->bypass && cmd == 0x00) {
	351	/* Unlock bypass reset */
	352	goto reset_flash;
	353	}
	354	/* We can enter CFI query mode from autoselect mode */
	355	if (boff == 0x55 && cmd == 0x98)
	356	goto enter_CFI_mode;
	357	/* No break here */
	358	default:
	359	DPRINTF("%s: invalid write for command %02x\n",
	360	__func__, pfl->cmd);
	361	goto reset_flash;
	362	}
	363	case 4:
	364	switch (pfl->cmd) {
	365	case 0xA0:
	366	/* Ignore writes while flash data write is occuring */
	367	/* As we suppose write is immediate, this should never happen */
	368	return;
	369	case 0x80:
	370	goto check_unlock1;
	371	default:
	372	/* Should never happen */
	373	DPRINTF("%s: invalid command state %02x (wc 4)\n",
	374	__func__, pfl->cmd);
	375	goto reset_flash;
	376	}
	377	break;
	378	case 5:
	379	switch (cmd) {
	380	case 0x10:
6725070d	381	if (boff != pfl->unlock_addr[0]) {
f8be67ee	382	DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n",
29133e9a FB	383	__func__, offset);
	384	goto reset_flash;
	385	}
	386	/* Chip erase */
	387	DPRINTF("%s: start chip erase\n", __func__);
4fbd24ba	388	memset(pfl->storage, 0xFF, pfl->chip_len);
29133e9a	389	pfl->status = 0x00;
4fbd24ba	390	pflash_update(pfl, 0, pfl->chip_len);
29133e9a	391	/* Let's wait 5 seconds before chip erase is done */
5fafdf24	392	qemu_mod_timer(pfl->timer,
6ee093c9	393	qemu_get_clock(vm_clock) + (get_ticks_per_sec() * 5));
29133e9a FB	394	break;
	395	case 0x30:
	396	/* Sector erase */
	397	p = pfl->storage;
	398	offset &= ~(pfl->sector_len - 1);
f8be67ee	399	DPRINTF("%s: start sector erase at " TARGET_FMT_plx "\n", __func__,
e96efcfc	400	offset);
29133e9a FB	401	memset(p + offset, 0xFF, pfl->sector_len);
	402	pflash_update(pfl, offset, pfl->sector_len);
	403	pfl->status = 0x00;
	404	/* Let's wait 1/2 second before sector erase is done */
5fafdf24	405	qemu_mod_timer(pfl->timer,
6ee093c9	406	qemu_get_clock(vm_clock) + (get_ticks_per_sec() / 2));
29133e9a FB	407	break;
	408	default:
	409	DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
	410	goto reset_flash;
	411	}
	412	pfl->cmd = cmd;
	413	break;
	414	case 6:
	415	switch (pfl->cmd) {
	416	case 0x10:
	417	/* Ignore writes during chip erase */
	418	return;
	419	case 0x30:
	420	/* Ignore writes during sector erase */
	421	return;
	422	default:
	423	/* Should never happen */
	424	DPRINTF("%s: invalid command state %02x (wc 6)\n",
	425	__func__, pfl->cmd);
	426	goto reset_flash;
	427	}
	428	break;
	429	case 7: /* Special value for CFI queries */
	430	DPRINTF("%s: invalid write in CFI query mode\n", __func__);
	431	goto reset_flash;
	432	default:
	433	/* Should never happen */
	434	DPRINTF("%s: invalid write state (wc 7)\n", __func__);
	435	goto reset_flash;
	436	}
	437	pfl->wcycle++;
	438
	439	return;
	440
	441	/* Reset flash */
	442	reset_flash:
29133e9a FB	443	pfl->bypass = 0;
	444	pfl->wcycle = 0;
	445	pfl->cmd = 0;
	446	return;
	447
	448	do_bypass:
	449	pfl->wcycle = 2;
	450	pfl->cmd = 0;
	451	return;
	452	}
	453
	454
5f9fc5ad BS	455	static uint32_t pflash_readb_be(void *opaque, target_phys_addr_t addr)
	456	{
	457	return pflash_read(opaque, addr, 1, 1);
	458	}
	459
	460	static uint32_t pflash_readb_le(void *opaque, target_phys_addr_t addr)
	461	{
	462	return pflash_read(opaque, addr, 1, 0);
	463	}
	464
	465	static uint32_t pflash_readw_be(void *opaque, target_phys_addr_t addr)
	466	{
	467	pflash_t *pfl = opaque;
	468
	469	return pflash_read(pfl, addr, 2, 1);
	470	}
	471
	472	static uint32_t pflash_readw_le(void *opaque, target_phys_addr_t addr)
	473	{
	474	pflash_t *pfl = opaque;
	475
	476	return pflash_read(pfl, addr, 2, 0);
	477	}
	478
	479	static uint32_t pflash_readl_be(void *opaque, target_phys_addr_t addr)
29133e9a	480	{
5f9fc5ad BS	481	pflash_t *pfl = opaque;
	482
	483	return pflash_read(pfl, addr, 4, 1);
29133e9a FB	484	}
29133e9a FB	485
5f9fc5ad	486	static uint32_t pflash_readl_le(void *opaque, target_phys_addr_t addr)
29133e9a	487	{
c227f099	488	pflash_t *pfl = opaque;
29133e9a	489
5f9fc5ad BS	490	return pflash_read(pfl, addr, 4, 0);
	491	}
	492
	493	static void pflash_writeb_be(void *opaque, target_phys_addr_t addr,
	494	uint32_t value)
	495	{
	496	pflash_write(opaque, addr, value, 1, 1);
29133e9a FB	497	}
29133e9a FB	498
5f9fc5ad BS	499	static void pflash_writeb_le(void *opaque, target_phys_addr_t addr,
	500	uint32_t value)
	501	{
	502	pflash_write(opaque, addr, value, 1, 0);
	503	}
	504
	505	static void pflash_writew_be(void *opaque, target_phys_addr_t addr,
	506	uint32_t value)
29133e9a	507	{
c227f099	508	pflash_t *pfl = opaque;
29133e9a	509
5f9fc5ad	510	pflash_write(pfl, addr, value, 2, 1);
29133e9a FB	511	}
29133e9a FB	512
5f9fc5ad BS	513	static void pflash_writew_le(void *opaque, target_phys_addr_t addr,
5f9fc5ad BS	514	uint32_t value)
29133e9a	515	{
5f9fc5ad BS	516	pflash_t *pfl = opaque;
	517
	518	pflash_write(pfl, addr, value, 2, 0);
29133e9a FB	519	}
29133e9a FB	520
5f9fc5ad BS	521	static void pflash_writel_be(void *opaque, target_phys_addr_t addr,
5f9fc5ad BS	522	uint32_t value)
29133e9a	523	{
c227f099	524	pflash_t *pfl = opaque;
29133e9a	525
5f9fc5ad	526	pflash_write(pfl, addr, value, 4, 1);
29133e9a FB	527	}
29133e9a FB	528
5f9fc5ad BS	529	static void pflash_writel_le(void *opaque, target_phys_addr_t addr,
5f9fc5ad BS	530	uint32_t value)
29133e9a	531	{
c227f099	532	pflash_t *pfl = opaque;
29133e9a	533
5f9fc5ad	534	pflash_write(pfl, addr, value, 4, 0);
29133e9a FB	535	}
29133e9a FB	536
5f9fc5ad BS	537	static CPUWriteMemoryFunc * const pflash_write_ops_be[] = {
	538	&pflash_writeb_be,
	539	&pflash_writew_be,
	540	&pflash_writel_be,
29133e9a FB	541	};
29133e9a FB	542
5f9fc5ad BS	543	static CPUReadMemoryFunc * const pflash_read_ops_be[] = {
	544	&pflash_readb_be,
	545	&pflash_readw_be,
	546	&pflash_readl_be,
	547	};
	548
	549	static CPUWriteMemoryFunc * const pflash_write_ops_le[] = {
	550	&pflash_writeb_le,
	551	&pflash_writew_le,
	552	&pflash_writel_le,
	553	};
	554
	555	static CPUReadMemoryFunc * const pflash_read_ops_le[] = {
	556	&pflash_readb_le,
	557	&pflash_readw_le,
	558	&pflash_readl_le,
29133e9a FB	559	};
	560
	561	/* Count trailing zeroes of a 32 bits quantity */
	562	static int ctz32 (uint32_t n)
	563	{
	564	int ret;
	565
	566	ret = 0;
	567	if (!(n & 0xFFFF)) {
	568	ret += 16;
	569	n = n >> 16;
	570	}
	571	if (!(n & 0xFF)) {
	572	ret += 8;
	573	n = n >> 8;
	574	}
	575	if (!(n & 0xF)) {
	576	ret += 4;
	577	n = n >> 4;
	578	}
	579	if (!(n & 0x3)) {
	580	ret += 2;
	581	n = n >> 2;
	582	}
	583	if (!(n & 0x1)) {
	584	ret++;
22ed1d34	585	#if 0 /* This is not necessary as n is never 0 */
29133e9a	586	n = n >> 1;
22ed1d34	587	#endif
29133e9a FB	588	}
	589	#if 0 /* This is not necessary as n is never 0 */
	590	if (!n)
	591	ret++;
	592	#endif
	593
	594	return ret;
	595	}
	596
c227f099	597	pflash_t *pflash_cfi02_register(target_phys_addr_t base, ram_addr_t off,
cf6d9118	598	BlockDriverState *bs, uint32_t sector_len,
4fbd24ba	599	int nb_blocs, int nb_mappings, int width,
88eeee0a	600	uint16_t id0, uint16_t id1,
6725070d	601	uint16_t id2, uint16_t id3,
5f9fc5ad BS	602	uint16_t unlock_addr0, uint16_t unlock_addr1,
5f9fc5ad BS	603	int be)
29133e9a	604	{
c227f099	605	pflash_t *pfl;
4fbd24ba	606	int32_t chip_len;
d0e7605e	607	int ret;
29133e9a	608
4fbd24ba	609	chip_len = sector_len * nb_blocs;
29133e9a	610	/* XXX: to be fixed */
95d1f3ed	611	#if 0
29133e9a FB	612	if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
	613	total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
	614	return NULL;
95d1f3ed	615	#endif
c227f099	616	pfl = qemu_mallocz(sizeof(pflash_t));
5c130f65 PB	617	/* FIXME: Allocate ram ourselves. */
5c130f65 PB	618	pfl->storage = qemu_get_ram_ptr(off);
5f9fc5ad BS	619	if (be) {
	620	pfl->fl_mem = cpu_register_io_memory(pflash_read_ops_be,
	621	pflash_write_ops_be,
	622	pfl);
	623	} else {
	624	pfl->fl_mem = cpu_register_io_memory(pflash_read_ops_le,
	625	pflash_write_ops_le,
	626	pfl);
	627	}
29133e9a	628	pfl->off = off;
4fbd24ba AZ	629	pfl->base = base;
	630	pfl->chip_len = chip_len;
	631	pfl->mappings = nb_mappings;
	632	pflash_register_memory(pfl, 1);
29133e9a FB	633	pfl->bs = bs;
	634	if (pfl->bs) {
	635	/* read the initial flash content */
d0e7605e VK	636	ret = bdrv_read(pfl->bs, 0, pfl->storage, chip_len >> 9);
	637	if (ret < 0) {
	638	cpu_unregister_io_memory(pfl->fl_mem);
	639	qemu_free(pfl);
	640	return NULL;
	641	}
29133e9a FB	642	}
	643	#if 0 /* XXX: there should be a bit to set up read-only,
	644	* the same way the hardware does (with WP pin).
	645	*/
	646	pfl->ro = 1;
	647	#else
	648	pfl->ro = 0;
	649	#endif
	650	pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
29133e9a	651	pfl->sector_len = sector_len;
29133e9a FB	652	pfl->width = width;
	653	pfl->wcycle = 0;
	654	pfl->cmd = 0;
	655	pfl->status = 0;
	656	pfl->ident[0] = id0;
	657	pfl->ident[1] = id1;
	658	pfl->ident[2] = id2;
	659	pfl->ident[3] = id3;
6725070d AZ	660	pfl->unlock_addr[0] = unlock_addr0;
6725070d AZ	661	pfl->unlock_addr[1] = unlock_addr1;
29133e9a FB	662	/* Hardcoded CFI table (mostly from SG29 Spansion flash) */
	663	pfl->cfi_len = 0x52;
	664	/* Standard "QRY" string */
	665	pfl->cfi_table[0x10] = 'Q';
	666	pfl->cfi_table[0x11] = 'R';
	667	pfl->cfi_table[0x12] = 'Y';
	668	/* Command set (AMD/Fujitsu) */
	669	pfl->cfi_table[0x13] = 0x02;
	670	pfl->cfi_table[0x14] = 0x00;
78556820 EI	671	/* Primary extended table address */
78556820 EI	672	pfl->cfi_table[0x15] = 0x31;
29133e9a FB	673	pfl->cfi_table[0x16] = 0x00;
	674	/* Alternate command set (none) */
	675	pfl->cfi_table[0x17] = 0x00;
	676	pfl->cfi_table[0x18] = 0x00;
	677	/* Alternate extended table (none) */
	678	pfl->cfi_table[0x19] = 0x00;
	679	pfl->cfi_table[0x1A] = 0x00;
	680	/* Vcc min */
	681	pfl->cfi_table[0x1B] = 0x27;
	682	/* Vcc max */
	683	pfl->cfi_table[0x1C] = 0x36;
	684	/* Vpp min (no Vpp pin) */
	685	pfl->cfi_table[0x1D] = 0x00;
	686	/* Vpp max (no Vpp pin) */
	687	pfl->cfi_table[0x1E] = 0x00;
	688	/* Reserved */
	689	pfl->cfi_table[0x1F] = 0x07;
78556820 EI	690	/* Timeout for min size buffer write (NA) */
78556820 EI	691	pfl->cfi_table[0x20] = 0x00;
29133e9a FB	692	/* Typical timeout for block erase (512 ms) */
	693	pfl->cfi_table[0x21] = 0x09;
	694	/* Typical timeout for full chip erase (4096 ms) */
	695	pfl->cfi_table[0x22] = 0x0C;
	696	/* Reserved */
	697	pfl->cfi_table[0x23] = 0x01;
78556820 EI	698	/* Max timeout for buffer write (NA) */
78556820 EI	699	pfl->cfi_table[0x24] = 0x00;
29133e9a FB	700	/* Max timeout for block erase */
	701	pfl->cfi_table[0x25] = 0x0A;
	702	/* Max timeout for chip erase */
	703	pfl->cfi_table[0x26] = 0x0D;
	704	/* Device size */
78556820	705	pfl->cfi_table[0x27] = ctz32(chip_len);
29133e9a FB	706	/* Flash device interface (8 & 16 bits) */
	707	pfl->cfi_table[0x28] = 0x02;
	708	pfl->cfi_table[0x29] = 0x00;
	709	/* Max number of bytes in multi-bytes write */
95d1f3ed JM	710	/* XXX: disable buffered write as it's not supported */
	711	// pfl->cfi_table[0x2A] = 0x05;
	712	pfl->cfi_table[0x2A] = 0x00;
29133e9a FB	713	pfl->cfi_table[0x2B] = 0x00;
	714	/* Number of erase block regions (uniform) */
	715	pfl->cfi_table[0x2C] = 0x01;
	716	/* Erase block region 1 */
	717	pfl->cfi_table[0x2D] = nb_blocs - 1;
	718	pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
	719	pfl->cfi_table[0x2F] = sector_len >> 8;
	720	pfl->cfi_table[0x30] = sector_len >> 16;
	721
78556820 EI	722	/* Extended */
	723	pfl->cfi_table[0x31] = 'P';
	724	pfl->cfi_table[0x32] = 'R';
	725	pfl->cfi_table[0x33] = 'I';
	726
	727	pfl->cfi_table[0x34] = '1';
	728	pfl->cfi_table[0x35] = '0';
	729
	730	pfl->cfi_table[0x36] = 0x00;
	731	pfl->cfi_table[0x37] = 0x00;
	732	pfl->cfi_table[0x38] = 0x00;
	733	pfl->cfi_table[0x39] = 0x00;
	734
	735	pfl->cfi_table[0x3a] = 0x00;
	736
	737	pfl->cfi_table[0x3b] = 0x00;
	738	pfl->cfi_table[0x3c] = 0x00;
	739
29133e9a FB	740	return pfl;
29133e9a FB	741	}