From 708405f3e56e3bee086f46a43398ee300c36a1d8 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 8 Jul 2024 09:50:22 +0200 Subject: [PATCH] net: phy: aquantia: wait for the GLOBAL_CFG to start returning real values When the PHY is first coming up (or resuming from suspend), it's possible that although the FW status shows as running, we still see zeroes in the GLOBAL_CFG set of registers and cannot determine available modes. Since all models support 10M, add a poll and wait the config to become available. Signed-off-by: Bartosz Golaszewski Signed-off-by: David S. Miller --- drivers/net/phy/aquantia/aquantia_main.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c index 974795bd0860..2c8ba2725a91 100644 --- a/drivers/net/phy/aquantia/aquantia_main.c +++ b/drivers/net/phy/aquantia/aquantia_main.c @@ -652,7 +652,13 @@ static int aqr107_fill_interface_modes(struct phy_device *phydev) unsigned long *possible = phydev->possible_interfaces; unsigned int serdes_mode, rate_adapt; phy_interface_t interface; - int i, val; + int i, val, ret; + + ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, + VEND1_GLOBAL_CFG_10M, val, val != 0, + 1000, 100000, false); + if (ret) + return ret; /* Walk the media-speed configuration registers to determine which * host-side serdes modes may be used by the PHY depending on the -- 2.42.0