PCI: acpiphp: Reassign resources on bridge if necessary

PCI: acpiphp: Reassign resources on bridge if necessary

When using ACPI PCI hotplug, hotplugging a device with large BARs may fail
if bridge windows programmed by firmware are not large enough.

Reproducer:
  $ qemu-kvm -monitor stdio -M q35  -m 4G \
      -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=on \
      -device id=rp1,pcie-root-port,bus=pcie.0,chassis=4 \
      disk_image

 wait till linux guest boots, then hotplug device:
   (qemu) device_add qxl,bus=rp1

 hotplug on guest side fails with:
   pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000
   pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff]
   pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff]
   pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff]
   pci 0000:01:00.0: reg 0x1c: [io  0x0000-0x001f]
   pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000]
   pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000]
   pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000]
   pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000]
   pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff]
   pci 0000:01:00.0: BAR 3: assigned [io  0x1000-0x101f]
   qxl 0000:01:00.0: enabling device (0000 -> 0003)
   Unable to create vram_mapping
   qxl: probe of 0000:01:00.0 failed with error -12

However when using native PCIe hotplug
  '-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off'
it works fine, since kernel attempts to reassign unused resources.

Use the same machinery as native PCIe hotplug to (re)assign resources.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Igor Mammedov <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Cc: [email protected]