]> Git Repo - linux.git/commit
ARM: dts: sunxi: add support for RerVision A33-Vstar board
authorIcenowy Zheng <[email protected]>
Fri, 13 Sep 2024 10:48:45 +0000 (18:48 +0800)
committerChen-Yu Tsai <[email protected]>
Fri, 25 Oct 2024 16:14:08 +0000 (00:14 +0800)
commit3888715c76956c6ea13577965586d5b891a1f3ff
treea486003594d9db5993c29076cb9a4d7a130e6524
parent654332bede7526cbe9e7ba4c1edbf86a1d0be76a
ARM: dts: sunxi: add support for RerVision A33-Vstar board

RerVision A33-Vstar board is a board based on their A33-Core1 SoM (A33
SoC + 512MiB DRAM + 4GiB eMMC + AXP223 PMIC), with multiple peripherals:

- MicroSD card slot
- 4.0mm/1.7mm DC jack connected to ACIN of AXP223 (and a XH2.54 2-pin
  connector for alternative 5V DC IN)
- OTG-capable microUSB port
- Reserved pads for soldering Li-ion battery and/or 3V RTC battery
- 3 LRADC-attached keys and 2 fixed function power/reset keys
- AP6212 Wi-Fi/BT combo module
- On-board GL850G hub attached to the USB host port of A33, and a
  RTL8152 USB Ethernet chip at the downstream of the hub
- Onboard microphone (not supported yet) and headphone jack
- 3 UART ports as PH2.0 3-pin connectors (UART2 one is currently used as
  debug output and others are ignored yet)

Signed-off-by: Icenowy Zheng <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Chen-Yu Tsai <[email protected]>
arch/arm/boot/dts/allwinner/Makefile
arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi [new file with mode: 0644]
arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts [new file with mode: 0644]
This page took 0.059821 seconds and 4 git commands to generate.